尖晶石锂锰氧化物电极首次脱锂过程的EIS研究

研究了尖晶石锂锰氧化物电极首次脱锂过程中的电化学阻抗特征. 通过选取适当的等效电路拟合实验所得的电化学阻抗谱数据, 获得了首次脱锂过程中固体电解质相界面膜(SEI膜)的电阻、电容以及电荷传递电阻、双电层电容等随电极极化电位的变化规律.     

电解液组成对尖晶石LiMn_2O_4中锂离子嵌脱过程的影响

运用电化学阻抗谱(EIS)研究了尖晶石LiMn2O4正极在1mol·L-1LiPF6-EC(碳酸乙烯酯)∶DEC(碳酸二乙酯)∶DMC(碳酸二甲酯),1mol·L-1LiPF6-EC∶DEC∶EMC(碳酸甲乙酯)和1mol·L-1LiPF6-EC∶DMC三种不同电解液中,-20-20℃范围内的阻抗谱特征随温度的变化.研究结果表明,温度强烈影响尖晶石LiMn2O4正极的阻抗谱特征,而电解液组成对尖晶石LiMn2O4正极阻抗谱特征的影响较小,但电解液组成对锂离子在尖晶石LiMn2O4正极中嵌入脱出过程相关动力学参数影响较大.测得尖晶石LiMn2O4正极在上述三种电解液中,锂离子迁移通过固体电解质相界面(SEI)膜的离子跳跃能垒平均值分别为7.60、16.40和18.40kJ·mol-1;电子电导率的热激活化能平均值分别为44.77、35.47和68.06kJ·mol-1;嵌入反应活化能平均值分别为52.19、46.19和69.86kJ·mol-1.     

尖晶石LiMn2O4中锂离子嵌入脱出过程的电化学阻抗谱研究

运用电化学阻抗谱(EIS)研究了尖晶石LiMn2O4电极的首次充放电过程. 发现EIS谱高频区域拉长压扁的半圆是由两个半圆相互重叠而成的, 分别归属于与锂离子通过固体电解质相界面膜(SEI膜)的迁移和与尖晶石LiMn2O4材料的电子电导率相关的特征. 通过选取适当的等效电路, 对实验所得的电化学阻抗谱数据进行拟合, 获得尖晶石LiMn2O4电极首次充放电过程中SEI膜电阻、电子电阻和电荷传递电阻等随电极极化电位变化的规律. 根据研究结果提出了嵌锂物理机制模型.     

室温离子液体电解液中尖晶石LiMn_2O_4的电化学性质

应用循环伏安、恒电流充放电和电化学阻抗技术研究了尖晶石L iMn2O4于室温离子液体电解液中的电化学性质.实验表明,以室温离子液体作电解液,L iMn2O4的首次放电容量可达108.2 mAh/g、循环效率高于90%,温度和电流密度显著影响电极的电化学性能.交流阻抗测定了L i+在电极/电解液相界面迁移的活化能,为55 kJ/mol.根据界面反应的高活化能解释了L iMn2O4在该离子液体电解液中低温性能和倍率充放电性能不佳的原因.     

Temperature effects on the electrochemical behavior of spinel LiMn(2)O(4) in quaternary ammonium-based ionic liquid electrolyte

Temperature dependence of the physiochemical characteristics of a room-temperature ionic liquid consisting of trimethylhexylammonium (TMHA) cation and bis(trifluoromethane) sulfonylimide (TFSI) anion containing different concentrations of LiTFSI salt was examined. Electrochemical properties of a spinel LiMn(2)O(4) electrode in 1 M LiTFSI/TMHA-TFSI ionic electrolyte were investigated at different temperatures by using cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. The Li/ionic electrolyte/LiMn(2)O(4) cell exhibited satisfactory electrochemical properties with a discharge capacity of 108.2 mA h/g and 91.4% coulombic efficiency in the first cycle under room temperature. At decreased temperature, reversible capacity of the cell could not attain a satisfactory value due to the high internal resistance of the cell and the large activation energy for lithium ion transfer through the electrode/electrolyte interface. Anodic electrolyte oxidation results in the decrease of coulombic efficiency with increasing temperature. Irreversible structural conversion of the spinel LiMn(2)O(4) in the ionic electrolyte, possibly associated with the formation of TMHA intercalated compounds and/or Jahn-Teller distortion, was considered to be responsible for the electrochemical decay with increasing cycles.     

LiCoO_2 electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy

The storage behavior and the first delithiation of LiCoO2 electrode in 1 mol/L LiPF6-EC:DMC:DEC elec- trolyte were investigated by electrochemical impedance spectroscopy (EIS). It has found that, along with the increase of storage time, the thickness of SEI film increases, and some organic carbonate lithium compounds are formed due to spontaneous reactions occurring between the LiCoO2 electrode and the electrolyte. When electrode potential is changed from 3.8 to 3.95 V, the reversible breakdown of the resistive SEI film occurs, which is attributed to the reversible dissolution of the SEI film component. With the increase of electrode potential, the thickness of SEI film increases rapidly above 4.2 V, due to overcharge reactions. The inductive loop observed in impedance spectra of the LiCoO2 electrode in Li/LiCoO2 cells is attributed to the formation of a Li1-xCoO2/LiCoO2 concentration cell. Moreover, it has been demonstrated that the lithium-ion insertion-deinsertion in LiCoO2 hosts can be well described by both Langmuir and Frumkin insertion isotherms, and the symmetry factor of charge transfer has been evaluated at 0.5.     

Dynamic structural changes at LiMn2O4/electrolyte interface during lithium battery reaction

Gaining a thorough understanding of the reactions on the electrode surfaces of lithium batteries is critical for designing new electrode materials suitable for high-power, long-life operation. A technique for directly observing surface structural changes has been developed that employs an epitaxial LiMn(2)O(4) thin-film model electrode and surface X-ray diffraction (SXRD). Epitaxial LiMn(2)O(4) thin films with restricted lattice planes (111) and (110) are grown on SrTiO(3) substrates by pulsed laser deposition. In situ SXRD studies have revealed dynamic structural changes that reduce the atomic symmetry at the electrode surface during the initial electrochemical reaction. The surface structural changes commence with the formation of an electric double layer, which is followed by surface reconstruction when a voltage is applied in the first charge process. Transmission electron microscopy images after 10 cycles confirm the formation of a solid electrolyte interface (SEI) layer on both the (111) and (110) surfaces and Mn dissolution from the (110) surface. The (111) surface is more stable than the (110) surface. The electrode stability of LiMn(2)O(4) depends on the reaction rate of SEI formation and the stability of the reconstructed surface structure.     

LiMn2O4正极在高温下性能衰退现象的研究

采用恒流充放电方法测量了温度升高导致ＬｉＭｎ２Ｏ４正极容量衰减的情况。发现当环境温度上升到５０℃时,ＬｉＭｎ２Ｏ４电极出现严重的容量损失和性能衰退,充电态的电极受影响的程度最为严重。对电解液的原子发射和红外光谱分析,电极晶相结构Ｘ－射线衍射及循环伏安实验速增加,电解液出现催化氧化是导致容量不可逆衰砬的原因。采用富锂尖晶石材料是抑制ＬｉＭｎ２Ｏ４高温性能下降的一种有效方法。     

LiCoO<Subscript>2</Subscript> electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy

The storage behavior and the first delithiation of LiCoO₂ electrode in 1 mol/L LiPF₆-EC:DMC:DEC electrolyte were investigated by electrochemical impedance spectroscopy (EIS). It has found that, along with the increase of storage time, the thickness of SEI film increases, and some organic carbonate lithium compounds are formed due to spontaneous reactions occurring between the LiCoO₂ electrode and the electrolyte. When electrode potential is changed from 3.8 to 3.95 V, the reversible breakdown of the resistive SEI film occurs, which is attributed to the reversible dissolution of the SEI film component. With the increase of electrode potential, the thickness of SEI film increases rapidly above 4.2 V, due to overcharge reactions. The inductive loop observed in impedance spectra of the LiCoO₂ electrode in Li/LiCoO₂ cells is attributed to the formation of a Li_1−x CoO₂/LiCoO₂ concentration cell. Moreover, it has been demonstrated that the lithium-ion insertion-deinsertion in LiCoO₂ hosts can be well described by both Langmuir and Frumkin insertion isotherms, and the symmetry factor of charge transfer has been evaluated at 0.5. Supported by the Special Funds for Major State Basic Research Project of China (Grant No. 2002CB211804)     

丁磺酸内酯对锂离子电池性能及负极界面的影响

用循环伏安(CV)、电化学阻抗谱(EIS)、扫描电镜(SEM)、能谱分析(EDS)及理论计算等方法研究了添加剂丁磺酸内酯(BS)对锂离子电池负极界面性质的影响. 研究表明, 在初次循环过程中, BS具有较低的最低空轨道能量, 优先于溶剂在石墨电极上还原分解, 并形成固体电解质相界面膜(SEI膜). 在含BS的电解液中形成的SEI膜的热稳定性高, 在70 ℃下储存24 h后, 膜电阻和电荷迁移电阻大小基本保持不变, 而在不含BS的电解液中形成的SEI膜的热稳定性较差, 在70 ℃下储存24 h后, 膜电阻和电荷迁移电阻大小有明显的增加. 从BS对锂离子电池电化学性能影响的研究表明, 加入少量的BS能够显著提高锂离子电池的室温放电容量、低温及高温储存放电性能.     

正尖晶石LiMn_2O_4电化学性能研究

采用高温固相反应合成了尖晶石LiMn2 O4 锂离子电池正极材料 ,并对其性能进行研究 .综合考察了影响材料电化学性能的主要因素 ,诸如原材料的选择、合成温度、Li/Mn比以及添加金属元素Co等 .研究了材料在高温下的电化学性能和影响因素 ,并分析了LiMn2 O4 在电解质中的溶解和引起容量衰减的原因     

The understanding of solid electrolyte interface (SEI) formation and mechanism as the effect of flouro-o-phenylenedimaleimaide (F-MI) additive on lithium-ion battery

Solid electrolyte interface (SEI) is a critical factor that influences battery performance. SEI layer is formed by the decomposition of organic and inorganic compounds after the first cycle. This study investigates SEI formation as a product of electrolyte decomposition by the presence of flouro-o-phenylenedimaleimaide (F-MI) additive. The presence of fluorine on the maleimide-based additive can increase storage capacity and reversible discharge capacity due to high electronegativity and high electron-withdrawing group. The electrolyte containing 0.1 wt% of F-MI-based additive can trigger the formation of SEI, which could suppress the decomposition of remaining electrolyte. The reduction potential was 2.35 to 2.21 V vs Li/Li⁺ as examined by cyclic voltammetry (CV). The mesocarbon microbeads (MCMB) cell with F-MI additive showed the lowest SEI resistance (Rsei) at 5898 Ω as evaluated by the electrochemical impedance spectroscopy (EIS). The morphology and element analysis on the negative electrode after the first charge-discharge cycle were examined by scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), and X-ray photoelectron spectroscopy (XPS). XPS result showed that MCMB cell with F-MI additive provides a higher intensity of organic compounds (RCH₂OCO₂Li) and thinner SEI than MCMB cell without an additive that provides a higher intensity of inorganic compound (Li₂CO₃ and Li₂O), which leads to the performance decay. It is concluded that attaching the fluorine functional group on the maleimide-based additive forms the ideal SEI formation for lithium-ion battery.     

尖晶石LiMn2O4锂充放电池的电化学研究

本文报导尖晶石型ＬｉＭｎ２Ｏ４化合物的制备方法，用循环伏安法和交流阻抗技术研究了Ｌｉ／有机电解液／ＬｉＭｎ２Ｏ４电池的电化学行为，用分形理论首次考察和进一步讨论电极材料的阻抗行为随锂离子嵌入或脱嵌电极时的变化。     

白藜芦醇对长期贮存锂离子电池电解液性能的影响

锂离子电池电解液从制造完成到使用,一般都会经历灌装、运输和贮存的过程,了解长期贮存过程对锂离子电池电解液性能的影响,对锂离子电池的生产具有一定的理论指导意义.本文运用电化学阻抗谱(EIS)测试并结合循环伏安法(CV)测试、充放电测试、扫描电子显微镜(SEM)等研究了1 mol.L-1 LiPF6-EC:EMC 基础电解...     

锂离子电池正极材料LiMn2-xCrxO4电化学性能的研究

针对尖晶石型LiMn2O4锂离子电池正极材料的容量衰减,提出了相应的抑制方法,所合成的LiMn2-xCrxO4(0相似文献   

尖晶石LiMn_2O_4高温电化学容量衰减及改进

综述了高温下尖晶石ＬｉＭｎ２Ｏ４容量衰减的原因、机理研究和改进它的高温性能的方法以及目前的进展,且指出了可能的提高它的高温性能的途径。     

锂离子电池LiMn2O4薄膜电极的制备研究进展

尖晶石ＬｉＭｎ２Ｏ４是最有希望替ＬｉＣｏＯ２的新一代锂离子电池阴极材料。高能、轻量、超薄将是未来锂离子电池一个十分重要的发展方向。本文对尖晶石ＬｉＭｎ２Ｏ４的晶体结构作了简要介绍。综述了近年来在ＬｉＭｎ２Ｏ４薄膜电极制备方面的研究进展,包括静电喷雾沉积（ＥＳＤ）、静脉激光沉积（ＰＬＣ）、射频磁溅射（ＲＦＭＳ）等等,并对今后的研究方向进行了展望。     

喷墨打印制备LiMn2O4薄膜电极及其电化学性能

通过溶胶-凝胶法制备了尖晶石LiMn2O4. 用分散剂Lormar D, 经超声分散制得了含LiMn2O4粒子的打印“墨水”, 并使用计算机喷墨打印的方法制得LiMn2O4薄膜电极. 薄膜电极的厚度约为1.8 μm. 用XRD、TG-DTA、SEM、循环伏安、电化学阻抗谱和充放电等方法对材料和电极的性能进行了表征. 结果表明, 在较大电流100 μA·cm-2 (2C)的充放电情况下, 电极能保持好的稳定性,其首次放电容量为109 mAh·g-1, 充放电54次后, 其容量仍可保持97.4%, 为105 mAh·g-1, 这可归因于薄膜电极中尖晶石LiMn2O4的晶型完整, LiMn2O4粒子小以及稳定的超薄电极结构.     

Electrochemical SPM investigation of the solid electrolyte interphase film formed on HOPG electrodes

Solid electrolyte interphase (SEI) film formation on graphite electrodes was studied on highly oriented pyrolytic graphite (HOPG) in nonaqueous electrolyte by in situ electrochemical atomic force microscopy (AFM). For potentials negative to 0.7 V versus Li|Li⁺ a SEI film is formed on the HOPG electrode surface. After the first cycle the film is rough and covers the surface of the HOPG electrode only partially. After the second cycle the HOPG surface is fully covered by a compact film. The thickness of the SEI film was measured by increasing the pressure of the AFM tip and thus scraping a part of the electrode surface. In this way a thickness of about 25 nm was found for the SEI film formed after two scan cycles between 3 and 0.01 V versus Li|Li⁺.     

Effects of current densities on the formation of LiCoO<Subscript>2</Subscript>/graphite lithium ion battery

The activation characteristics and the effects of current densities on the formation of a separate LiCoO₂ and graphite electrode were investigated and the behavior also was compared with that of the full LiCoO₂/graphite batteries using various electrochemical techniques. The results showed that the formation current densities obviously influenced the electrochemical impedance spectrum of Li/graphite, LiCoO₂/Li, and LiCoO₂/graphite cells. The electrolyte was reduced on the surface of graphite anode between 2.5 and 3.6 V to form a preliminary solid electrolyte interphase (SEI) film of anode during the formation of the LiCoO₂/graphite batteries. The electrolyte was oxidized from 3.95 V vs Li⁺/Li on the surface of LiCoO₂ to form a SEI film of cathode. A highly conducting SEI film could be formed gradually on the surface of graphite anode, whereas the SEI film of LiCoO₂ cathode had high resistance. The LiCoO₂ cathode could be activated completely at the first cycle, while the activation of the graphite anode needed several cycles. The columbic efficiency of the first cycle increased, but that of the second decreased with the increase in the formation current of LiCoO₂/graphite batteries. The formation current influenced the cycling performance of batteries, especially the high-temperature cycling performance. Therefore, the batteries should be activated with proper current densities to ensure an excellent formation of SEI film on the anode surface.