Electronic Properties and Field‐Effect Transistors of Thiophene‐Based Donor–Acceptor Conjugated Copolymers

Summary: The thiophene‐quinoxaline donor–acceptor conjugated copolymer poly[(thiophene‐2,5‐diyl‐alt‐(2,3‐diheptylquinoxaline‐5,8‐diyl)] (PTHQx) was explored as a semiconductor in thin‐film organic field‐effect transistors (OFETs). A hole mobility of 3.6 × 10⁻³ cm² · V⁻¹ · s⁻¹ and an on/off current ratio of 6 × 10⁵ were observed in p‐channel OFETs made from spin‐coated PTHQx thin films. The electronic structures of PTHQx and a related thiophene‐thienopyrazine donor–acceptor copolymer were calculated by density functional theory. Atomic force microscopy of PTHQx thin films showed a polycrystalline grain morphology that varied with the substrate.

Output (left) and transfer (right) characteristics of a PTHQx (structure shown) organic field‐effect transistor.     

New π‐Conjugated Polymers Containing 1,3,5‐Triazine Units in the Main Chain: Synthesis and Optical and Electrochemical Properties of the Polymers

Summary: Three new soluble π‐conjugated polymers containing 1,3,5‐triazine units in the main chain, Pa–Pc, were synthesized. The polymers showed optical properties in solution that were mainly dependant on the properties of the substituting R groups, on the triazine ring. Hence, Pa and Pb (R = H and  OCH₃, respectively) showed blue photoluminescent (PL) emission with high quantum yields (QY) even in polar solvents, whereas Pc (R = N,N‐dimethylamino) gave green‐blue PL emission with very low QY. The PL spectra of the polymers in solution were concentration and polarity dependent, which suggested the formation of an exciplex.

The three new soluble π‐conjugated polymers containing 1,3,5‐triazine units in the main chain synthesized here.     

Copolymerization of Ethylene and 10‐Undecen‐1‐ol using a Montmorillonite‐Intercalated Metallocene Catalyst: Synthesis of Polyethylene/Montmorillonite Nanocomposites with Enhanced Structural Stability

Summary: Ethylene and 10‐undecen‐1‐ol have been successfully copolymerized by an organically modified montmorillonite (OMMT)‐intercalated metallocene catalyst, Et[Ind]₂ZrCl₂, activated by methylaluminoxane (MAO). The obtained hydroxy‐functionalized polyethylene (PE‐OH)/OMMT nanocomposites exhibit enhanced structural stability as compared with the neat PE‐based ones, with no significant collapse of the nanocomposite structure being detected by WAXD examination after high‐temperature processing. The simultaneous polyolefin functionalization provides an effective and convenient solution to stabilize the PE/MMT nanocomposite structure formed by in‐situ polymerization.

     

Highly Active Syndiospecific Living Polymerization of Higher 1‐Alkene with ansa‐Fluorenylamidodimethyltitanium Complex

1‐Hexene polymerization was conducted by [t‐BuNSiMe₂(3,6‐t‐Bu₂Flu)]TiMe₂ ( 1 ) using trialkylaluminum‐free modified methylaluminoxane (dMMAO) as a cocatalyst in toluene. The system produced living syndiotactic poly(1‐hexene) with high turnover frequency of propagation (TOF, 98 s⁻¹) at 0 °C. The propagation rate was increased linearly against the 1‐hexene concentration, which indicates that the first‐order dependence of the propagation rate on monomer concentration. Polymerizations of 1‐octene, 1‐decene and 1‐dodecene were also conducted for investigating the effect of chain length of 1‐alkene on propagation rate by means of the livingness of this system. The propagation rate decreased according to the chain length until 1‐decene but almost unchanged in longer 1‐alkene: TOF, 1‐octene (62 s⁻¹)>1‐decene (32 s⁻¹) ≈ 1‐dodecene (31 s⁻¹).

     

Silica‐Protected Micron and Sub‐Micron Capsules and Particles for Self‐Healing at the Microscale

A generalized silica coating scheme is used to functionalize and protect sub‐micron and micron size dicyclopentadiene monomer‐filled capsules and polymer‐protected Grubbs' catalyst particles. These capsules and particles are used for self‐healing of microscale damage in an epoxy‐based polymer. The silica layer both protects the capsules and particles, and limits their aggregation when added to an epoxy matrix, enabling the capsules and particles to be dispersed at high concentrations with little loss of reactivity.

     

Electrical Conductivity of an Individual Polyaniline Nanotube Synthesized by a Self‐Assembly Method

Camphor sulfonic acid (CSA) doped polyaniline (PANI) nanotubes (175 nm in outer diameter and 120 nm in inner diameter) were synthesized successfully by a self‐assembly method. It is found that the room‐temperature conductivity of an individual PANI nanotube is 30.5 S · cm⁻¹; in particular, the intrinsic resistance of an individual nanotube (30 kΩ) is much smaller than the contact resistance of crossed nanotubes (500 kΩ).

A SEM image of two crossed PANI‐CSA nanotubes and the attached Pt electrodes.     

Ambipolar Field‐Effect Transistor (FET) and Redox Characteristics of a π‐Conjugated Thiophene/1,3,4‐Thiadiazole CT‐Type Copolymer

Summary: A π‐conjugated charge transfer‐type copolymer consisting of an electron‐donating thiophene and an electron‐accepting 1,3,4‐thiadiazole, P(ThdzTh), underwent facile electrochemical p‐ and n‐doping, as revealed by cyclic voltammetry. The copolymer gave a new ambipolar field‐effect transistor (FET), which showed typical I_DS (source–drain current)–V_DS (source–drain voltage) curves in both a p‐type working mode and an n‐type working mode. In the n‐type working mode, the polymer showed a carrier mobility of about 5 × 10⁻³ cm² · V⁻¹ · s⁻¹ and an on/off ratio of about 3 × 10⁴.

n‐Channel field‐effect transistor characteristics of P(ThdzTh).     

An Extremely Narrow‐Band‐Gap Conjugated Polymer with Heterocyclic Backbone and its Use in Optoelectronic Devices

Summary: A novel narrow‐band‐gap conjugated polymer with heterocyclic backbone, poly[4,7‐bis(4‐decanyl‐2‐thienyl)‐2′,1′,3^′‐benzothiadiazole‐thiophene‐2,5‐] (PDDBT, E_g = 1.38 eV) was synthesized by a Stille coupling reaction. Prototype bulk heterojunction photovoltaic cells from PDDBT and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) with a ITO/PEDOT:PSS/PDDBT:PCBM(1:3)/Ba/Al device architecture showed power conversion efficiencies up to 0.13% under AM1.5 solar simulator (100 mW · cm⁻²) with an open‐circuit voltage V_oc of 0.65 V, a short‐circuit current density J_sc of 0.6 mA · cm⁻², and a photocurrent response up to 880 nm. The electroluminescent device from PDDBT showed a near‐infrared light emission peak at around 830 nm with maximal external quantum efficiency of 0.08% and a turn‐on voltage at 3.5 V.

Normalized PL and EL spectra of PDDBT and photosensitivity of PVCs based on PDDBT/PCBM (1:3) blend. The scheme shows the chemical structure of PDDBT.     

Cross‐Linked Multilayers of Poly(vinyl amine) as a Single Component and Their Interaction with Proteins

Novel multilayer thin films that consist solely of cross‐linked single component layers are generated by a selective cross‐linking of the poly(vinyl amine) (PVAm) layers in [PVAm/poly(acrylic acid) (PAA)]_n thin films constructed either on silica particles or silicon wafers, followed by the removal of PAA. The surface topography of the (PVAm)_n multilayer thin films, before and after the adsorption of human serum albumin (HSA), has been studied by atomic force microscopy on the freeze‐dried films. The decrease of the average roughness of the film after the adsorption of HSA showed the protein was adsorbed into the (PVAm)_n film making these films potential reservoirs for proteins.

     

Lewis Acid‐Induced N‐Methyleneamines as Initiators in the Synthesis of Secondary Amine‐Terminated Polymers

Summary: The cationic polymerization of poly(tert‐butyl vinyl ether) using N‐methyleneamine equivalents derived from a Lewis acid/1,3,5‐trimethylhexahydro‐1,3,5‐triazine (TMTA) co‐initiating system is reported. The resulting polymers possessed secondary amine functionality at the chain terminus, verified by derivatization with 4‐chloro‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (NBD‐Cl) and subsequent analysis with GPC‐UV (470 nm) and ¹H NMR.

Use of N‐methyleneamine equivalents lacking aryl substituents to afford amine‐terminated poly(tert‐butyl vinyl ether).     

Polyaniline Microtubes with a Hexagonal Cross‐Section and pH‐Sensitive Fluorescence Properties

Polyaniline (PANI) microtubes with a hexagonal cross‐section are successfully synthesized by a self‐assembly process in the presence of 8‐hydroxyquinoline‐5‐sulfonic acid (HQS) as a dopant and FeCl₃ as an oxidant. The wall thickness of the PANI/HQS microtubes can be adjusted by the content of the oxidant. It is proposed that the aniline/HQS salts serve as a hard template for the formation of the hexagonal‐cross‐section microtubes. Moreover, PANI/HQS microtubes combined with ZnSO₄ show pH‐dependent fluorescence. PANI hexagonal‐cross‐section microtubes combined with a pH‐sensitive fluorescence may promise potential applications in fields such as chemical sensors and confined reaction vessels.

     

Formation of Silica/Poly(p‐dioxanone) Microspheres by Surface‐Initiated Polymerization

A polymeric film of a biodegradable poly(p‐dioxanone) was grown from 490 nm silica particles by monolayer formation via self‐assembly of hydroxy‐terminated triethoxysilane and subsequent surface‐initiated ring‐opening polymerization of p‐dioxanone. The resulting silica/poly(p‐dioxanone) hybrid particles were characterized by means of ¹H NMR spectroscopy, IR spectroscopy, thermogravimetric analysis, field‐emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy.

     

Enhancement of Photostability in Blue‐Light‐Emitting Polymers Doped with Gold Nanoparticles

A dramatic increase in the photostability of a blue‐light‐emitting polymer, poly(9,9‐dioctylfluorene), was achieved by the addition of 5–10 nm gold nanoparticles. The optical absorption band of the gold nanoparticles was tuned to resonate the triplet exciton ground state bandgap energy of the polymer. Photo‐oxidation rate of poly(9,9‐dioctylfluorene) was effectively reduced by doping the polymer with very small amounts (≈10⁻⁶–10⁻⁵ volume fraction) of the gold nanoparticles.

Retarded photo‐oxidation in PDOF nanocomposite films with various doped gold nanoparticles.     

Synthesis of Dendritic Oligo‐Spiro(fluorene‐9,9′‐xanthene) Derivatives with Carbazole and Fluorene Pendants and their Thermal,Optical, and Electroluminescent Properties

Two novel spiro‐configured ter(arylene‐ethynylene) derivatives, TSF‐Cz and TSF‐F , have been designed and synthesized using spiro(fluorene‐9,9′‐xanthene) (SFX) as building blocks, introducing a hole‐transporting carbazole and a fluorene chromophore as the peripheral functional group into the backbone through an oxygen atom. The two well‐defined oligomers possess good solubility, film‐forming quality, and high T_g's at 140 and 126 °C, respectively. In addition, these oligomers exhibit blue photoluminescence (PL) emission both in solution and solid states. The double‐layered devices fabricated using the two materials as the emitter show a sky‐blue emission with a brightness and a current efficiency of 7 613 cd · m⁻² and 1.11 cd · A⁻¹ for TSF‐Cz , and 1 507 cd · m⁻² and 0.36 cd · A⁻¹ for TSF‐F , respectively.

     

Kumada Catalyst‐Transfer Polycondensation: Mechanism,Opportunities, and Challenges

Kumada catalyst‐transfer polycondensation (KCTP) is a new but rapidly developing method with great potential for the preparation of well‐defined conjugated polymers (CPs). The recently discovered chain‐growth mechanism is unique among the various transition metal‐catalyzed polycondensations, and has thus attracted much attention among researchers. Most progress is found in the areas of mechanism and external initiation via new initiators, but also the number of monomers other than thiophene that can be polymerized is steadily increasing. Accordingly, the variety of CP chain architectures is increasing as well, and a considerable contribution of KCTP toward more efficient materials can be expected in the future. This review critically focuses on very recent progress in the synthesis of CPs and the mechanism of KCTP, and is finally aimed at providing a comprehensive picture of this exciting polymerization method.

     

Synthesis of a Novel Low‐Bandgap Polymer Based on a Ladder‐Type Heptacyclic Arene Consisting of Outer Thieno[3,2‐b]thiophene Units for Efficient Photovoltaic Application

A novel conjugated polymer PIDTT‐quinoxaline (Qx) based on the coplanar thieno[3,2‐b]thiophene‐phenylene‐thieno[3,2‐b]thiophene structure is synthesized and evaluated as an electron‐donor material for bulk‐heterojunction polymer solar cells (BHJ PSCs). The absorption spectra, electrochemical, charge transport, and film morphology properties as well as theoretical modeling of PIDTT‐Qx are investigated to understand its intrinsic structure–property relationship. As expected, this polymer with an extended π‐conjugated backbone exhibits a narrow‐bandgap and board absorption spectrum for enhanced light harvesting. BHJ PSCs (ITO/PEDOT:PSS/polymer:PC₇₁BM/interlayer/Al) afford a maximum power conversion efficiency of 5.05% with an open‐circuit voltage of 0.84 V, a short‐circuit current density of 11.26 mA cm⁻², and a fill factor of 53.4%. These results demonstrate the potential of PIDTT‐Qx as an efficient electron‐donor material for BHJ PSCs.

     

η3‐Benzyl‐Nickel‐Diimine Complex: Synthesis and Catalytic Properties in Ethylene Polymerization

The oxidative addition of benzyl chloride to Ni(cod)₂ in the presence of 1,4‐bis(2,6‐diisopropylphenyl)acenaphthenediimine followed by chloride abstraction affords [(η³‐CH₂C₆H₅)Ni(α‐diimine)][PF₆] (α‐diimine = 1,4‐bis(2,6‐diisopropylphenyl)acenaphthenediimine) in 70% yield. The complex is active in ethylene polymerization in the presence of methylaluminoxane and under mild reaction conditions. The polyethylenes obtained are highly branched, have very low densities, do not show T_m or measurable crystallinity and have molecular weights ranging from 80 × 10³ to 290 × 10³ g · mol⁻¹.

     

Electronic Properties and Photovoltaic Performances of a Series of Oligothiophene Copolymers Incorporating Both Thieno[3,2‐b]thiophene and 2,1,3‐Benzothiadiazole Moieties

A series of donor‐acceptor alternated conjugated copolymers, composed of thiophene, bithiophene, thieno[3,2‐b]thiophene, and 2,1,3‐benzothiadiazole units and differing from each other by the nature and the number of 3‐alkylthiophene in the backbone, have been synthesized by Stille cross‐coupling polymerization. The material's optical and electrochemical properties, in solution and in thin films, have been investigated using UV‐Visible absorption and cyclic voltammetry. Bulk heterojunction solar cells using blends of the newly synthesized copolymers, as electron donor, and C60‐PCBM or C70‐PCBM, as electron transporting material, have been elaborated. A maximum power conversion efficiency of 1.8% is achieved with a 1:4 PPBzT²‐C12:C70‐PCBM weight ratio.

     

Application of Poly(3‐hexylthiophene) Functionalized with an Anchoring Group in Dye‐sensitized Solar Cells

A series of three poly(3‐hexylthiophene) functionalized either with a cyanoacetic acid (CA) or a rhodanine‐3‐acetic acid anchoring groups were synthesized and characterized. The TiO₂ based dye‐sensitized solar cells have been fabricated and performances were tested. We show that shorter chain length (15 thiophene units) linked to CA binding group gives good performances as J_sc, V_oc, FF and η(%) were 6.93(mA · cm⁻²), 0.65(V), 0.67 and 3.02%, respectively. A maximum IPCE of ≈50% at 500 nm was recorded with a liquid electrolyte, under AM 1.5 simulated solar irradiance.

     

Mesogen‐Free Supramolecular Liquid Crystalline State Formed by a Polyelectrolyte/Amphiphile Complex

Summary: The microstructure and phase transformation of a highly‐branched polyethyleneimine/octadecanoic acid (PEI(OA)_1.0) complex were investigated using a combination of DSC, XRD, optical polarised microscopy and temperature dependent FT‐IR spectroscopy. A mesogen‐free thermotropic liquid crystalline state was observed in a certain temperature region. The strong ionic interaction between  COO⁻ (from OA) and  NH (from PEI) and the hydrophobic interaction between the alkyl side chains contributes to the formation of a thermotropic liquid crystalline structure.