Silyl‐Terminated Ethylene‐co‐Norbornene Copolymers by Organotitanium‐Based Catalysts

Ethylene (E) and norbornene (N) were copolymerized in the presence of PhSiH₃ as chain‐transfer agent with [Ti(η⁵:η¹‐C₅Me₄SiMe₂NBu^t)(η¹‐Me)₂] precatalyst combined with [Ph₃C][B(C₆F₅)₄]. The silane was introduced at chain‐ends of E‐co‐N copolymers with concomitant reinitiation of the growing polymer chain. The concentrations of the silane and polymer molecular weight are inversely correlated. The characteristic signals of  SiH₂Ph chain‐ends were observed by ¹H NMR. The Si heteroatom is predominantly adjacent to ethylene units in E‐co‐N copolymers with high N content.

     

New Strategy Targeting Well‐Defined Polymethylene‐block‐Polystyrene Copolymers: The Combination of Living Polymerization of Ylides and Atom Transfer Radical Polymerization

Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) of styrene. A series of hydroxyl‐terminated polymethylenes (PM‐OHs) with different molecular weight and narrow molecular weight distribution were prepared using living polymerization of ylides following efficient oxidation in a quantitive functionality. Then, the macroinitiators (PM‐MIs ( = 1 900–15 000; PDI = 1.12–1.23)) transformed from PM‐OHs in ≈ 100% conversion initiated ATRPs of styrene to construct PM‐b‐PS copolymers. The GPC traces indicated the successful extension of PS segment ( of PM‐b‐PS = 5 000–41 800; PDI = 1.08–1.23). Such copolymers were characterized by ¹H NMR and DSC.

     

Crystallization of Polystyrene‐block‐[Syndiotactic Poly(propylene)] Block Copolymers from Confinement to Breakout

Summary: Various crystalline textures have been identified in a crystallizable block copolymer system, polystyrene‐block‐[syndiotactic poly(propylene)] (PS‐sPP), having a glass‐transition temperature of PS (T_g,PS) located in the midst of the sPP crystallization window. A confined morphology for the crystallization of sPP was observed while the crystallization temperature of sPP (T_c,sPP) was less than T_g,PS. A further increase in T_c,sPP could lead to a breakout in nanostructure. This study revealed the T_g effect on crystallization‐induced morphological changes of block copolymers from confinement to breakout.

TEM images and one‐dimensional SAXS profiles of PS‐sPP isothermally crystallized at T_ODT > T_g,PS > T_c,sPP (top) and T_ODT > T_c,sPP > T_g,PS (bottom).     

Polymethylene‐b‐polystyrene diblock copolymer: Synthesis,property, and application

The design and synthesis of well‐defined polymethylene‐b‐polystyrene (PM‐b‐PS, M_n = 1.3 × 10⁴–3.0 × 10⁴ g/mol; M_w/M_n (GPC) = 1.08–1.18) diblock copolymers by the combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) was successfully achieved. The ¹H NMR spectrum and GPC traces of PM‐b‐PS indicated the successful extension of PS segment on the PM macroinitiator. The micellization behavior of such diblock copolymers in tetrahydrofuran were characterized by dynamic light scattering (DLS) and atomic force microscopy (AFM) techniques. The average aggregate sizes of PM‐b‐PS diblock copolymers with the same length of PM segment in tetrahydrofuran solution (1.0 mg mL^?1) increases from 104.2 nm to 167.7 nm when the molecular weight of PS segment increases. The spherical precipitated aggregates of PM‐b‐PS diblock copolymers with an average diameter of 600 nm were observed by AFM. Honeycomb porous films with the average diameter of 3.0 μm and 6.0 μm, respectively, were successfully fabricated using the solution of PM‐b‐PS diblock copolymers in carbon disulfide via the breath‐figure (BF) method under a static humid condition. The cross‐sections of low density polyethylene (LDPE)/polystyrene (PS)/PM‐b‐PS and LDPE/polycarbonate (PC)/PM‐b‐PS blends were observed by scanning electron microscope and reveal that the PM‐b‐PS diblock copolymers are effective compatilizers for LDPE/PS and LDPE/PC blends. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1894–1900, 2010     

Poly(ferrocenylsilane)‐block‐Polylactide Block Copolymers

A PFS/PLA block copolymer was studied to probe the effect of strong surface interactions on pattern formation in PFS block copolymer thin films. Successful synthesis of PFS‐b‐PLA was demonstrated. Thin films of these polymers show phase separation to form PFS microdomains in a PLA matrix, and ultrathin films (<5 nm) formed SINPATs on silicon and mica. The SINPATs consisted of strongly surface‐adsorbed PLA blocks on top of which the PFS blocks dewetted into sphere‐like features. The lateral spacing between these features was regular, and was typically much larger than the length scale associated with regular block copolymer phase separation.

     

Synthesis of polyolefin‐block‐polystyrene through sequential coordination and anionic polymerizations

Two representative bulk polymers, polyolefin (PO) and polystyrene (PS), were molecularly connected to form PO‐block‐PS by sequentially performing coordination and anionic polymerizations in one pot. Ethylene/1‐octene copolymerization was performed using a typical ansa‐metallocene catalyst, rac‐[Me₂Si(2‐methylindenyl)]₂ZrCl₂, in the presence of (benzyl)₂zinc to grow PO‐chains at the Zn site. Anionic styrene polymerization was subsequently performed using nBuLi·(tmeda) (tmeda, N,N,N′,N′‐tetramethylethylenediamine) initiator to consecutively grow PS‐chains at the Zn site. The composition and the molecular weight of the PO‐blocks were controllable depending on the feed amounts of 1‐octene and (benzyl)₂zinc (1‐octene fraction: ～20, ～40 wt %; PO‐M_w, 77,000–174,000) and the PS‐block size was also controlled (PS‐M_n, ～21,000) with the complete conversion of the styrene monomer. Formation of block copolymers was evident in the GPC curves, TEM images, and strain‐stress curves. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3110–3118     

Polymethylene‐block‐polystyrene copolymers: A new synthetic approach using a combination of polyhomologation and reversible addition‐fragmentation chain‐transfer polymerization and their microfibers and microspheres fabricated through electrospinning process

Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of polyhomologation of ylides and reversible addition‐fragmentation chain‐transfer (RAFT) polymerization of styrene. Trithiocarbonate‐terminated polymethylenes (PM‐TTCB) (M_n = 1400 g mol^?1; M_w/M_n = 1.09 and M_n = 2100 g mol^?1; M_w/M_n = 1.20) were obtained via an esterification of S?1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetate) trithiocarbonate with hydroxyl‐terminated polymethylene synthesized via polyhomologation of ylides followed by oxidation. Then, a series of PM‐b‐PS (M_n = 5500–34,000 g mol^?1; M_w/M_n = 1.12–1.25) diblock copolymers were obtained by RAFT polymerization of styrene using PM‐TTCB as a macromolecular chain‐transfer agent. The chain structures of all the polymers were characterized by proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography, and Fourier transform infrared spectroscopy. The thiocarbonylthio end‐group of PM‐b‐PS was transformed into thiol group by aminolysis and confirmed by UV–vis spectroscopy. In addition, microfibers and microspheres of such diblock copolymers were fabricated by electrospinning process and observed by scanning electron microscopy (SEM). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2892–2899     

Strain state of poly(N‐isopropylacrylamide) in polystyrene‐b‐poly(N‐isopropylacrylamide) block copolymers and binary blends with polystyrene

Three diblock copolymers of polystyrene‐b‐poly(N‐isopropylacrylamide) (PS‐b‐PNIPAM) were prepared by reversible addition‐fragmentation chain transfer technique (RAFT) with compositions f_PS = 0.84, f_PS = 0.29, and f_PS = 0.33. Block copolymers rich in PNIPAM were blended with polystyrene and its morphological effects were studied. The morphology of thin films was induced by acetone vapor and determined in the dried state by means of TEM. Copolymers with f_PS = 0.84 and f_PS = 0.29 form hexagonally packed cylinder (HPC) morphologies while that with f_PS = 0.33 corresponds to a lamellar structure. In almost all cases where PNIPAM constitutes the continuous phase, a contraction of the PNIPAM blocks with respect to their average unperturbed dimension was observed, contrary to what one expects from the physics of self‐assembly of block copolymers. In contrast, for HPC morphology where PNIPAM is confined in a PS matrix, both blocks are highly extended. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1368–1376     

Thermodynamic characteristics of poly(cyclohexylethylene‐b‐ethylene‐co‐ethylethylene) block copolymers

A series of poly(cyclohexylethylene‐b‐ethylene‐co‐ethylethylene) (C‐E/E_E) diblock copolymers containing approximately 50% by volume glassy C blocks and varying fraction (x) of E_E repeat units, 0.07 ≤ x ≤ 0.90, was synthesized by anionic polymerization and catalytic hydrogenation. The effects of ethyl branch content on the melt state segment–segment (χ) interaction parameter and soft (E/E_E) block crystallinity were studied. The percent crystallinity ranged from approximately 30% at x = 0.07 to 0% at about x ≥ 0.30, while the melting temperature changed from 101 °C at x = 0.07 to 44 °C at x = 0.28. Dynamic mechanical spectroscopy was employed to determine the order–disorder transition (ODT) temperatures, from which χ was calculated assuming the mean‐field prediction (χN_n)_ODT = 10.5. Previously published results for the temperature dependent binary interaction parameters for C‐E (x = 0.07), C‐E_E (x = 0.90), and E‐E_E (x = 0.07 and x = 0.90) fail to account for the quantitative x dependence of χ, based on a simple binary interaction model. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 566–574, 2010     

Enhancing the PLA crystallization rate by incorporating a polystyrene‐block‐poly(methyl methacrylate) block copolymer: Synergy of polystyrene and poly(methyl methacrylate) segments

A polystyrene‐block‐poly(methyl methacrylate) (PS‐b‐PMMA) exhibiting a well‐defined structure was prepared combining anionic polymerization and mercaptan/ε‐caprolactam living polymerization. To evaluate how this block copolymer affected the crystallization of polylactide (PLA), 0.5 wt % thiol‐terminated PS homopolymer (PSSH), PMMA, and PS‐b‐PMMA was melt‐blended with PLA. The calorimetric characterization of the nonisothermal and isothermal crystallization behavior was analyzed according to Avrami's theory, indicating that PS‐b‐PMMA more effectively increased the crystallization kinetics of the PLA matrix than did PSSH or PMMA. The results revealed that the synergistic effect of the PS and PMMA blocks appeared only when they were simultaneously presented in the PLA matrix. The PS block increased the number of nucleation sites and decreased the spherulite size, whereas the PMMA block facilitated the excellent dispersion of PS‐b‐PMMA in the PLA matrix as shown in polarizing optical microscope experiments. Incorporating PS‐b‐PMMA improved the PLA crystallization rate by promoting heterogeneous nucleation. In addition, incorporating 0.5 wt % PS‐b‐PMMA increased the relative crystallinity of PLA to 43.5%, and decreased the crystallization half‐time to 2.4 min when the blend was isothermal at 105 °C. The PLA crystal structure was unchanged by the presence of PS‐b‐PMMA; however, the crystallization rate was enhanced as probed by SEM and X‐ray diffraction. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 823–832     

Structural arrangement of crystalline/amorphous phases of polyethylene‐block‐polystyrene copolymer as induced by orientation techniques

A polyethylene‐block‐polystyrene copolymer film having a bicontinuous crystalline/amorphous phases was tensile‐drawn under various conditions for the structural arrangement of these phases. The prepared film could be drawn below the melting temperature of the polyethylene component, with the highest drawability obtained at 60°C. However, the initial bicontinuous structure was gradually destroyed with increasing strain because the drawing temperature was lower than the glass‐transition temperature of the polystyrene component. Correspondingly, a necking phenomenon was clearly recognizable when samples were drawn. In contrast, drawing near the melting temperature of the polyethylene component produced less orientation of both the crystalline and amorphous phases, resulting in homogeneous deformation with lower drawing stress. These results indicated that the modification of the lower ductility of the polystyrene component was key to the effective structural arrangement of both phases by tensile drawing. Here, a solvent‐swelling technique was applied to improve polystyrene deformability even below its glass‐transition temperature. Tensile drawing after such a treatment successfully induced the orientation of both the crystalline and amorphous phases while retaining their initial continuities. A change in the deformation type from necking to homogeneous deformation was also confirmed for the stress–strain behavior. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1731–1737, 2006     

Synthesis of Block Copolymers Modified with Phosphonate Ester Groups Using Nitroxide‐Mediated Radical Polymerization

Summary: Phosphonate groups were introduced into block copolymers of styrene derivatives either as single end‐groups or as small blocks using nitroxide‐mediated radical polymerization. In order to combine the hydrophobic and hydrophilic segments, block copolymers with N,N‐dimethyl acrylamide were synthesized. After hydrolysis to phosphonic acid groups, adsorption of the polymer onto metal oxides was possible.

Conversion of the phosphonate groups by transesterification with trimethylbromosilane (TMBS), followed by hydrolysis of the silylester group.     

Effect of Casting Solvent on Morphology and Physical Properties of Partially Sulfonated Polystyrene‐block‐poly(ethylene‐ran‐butylene)‐block‐polystyrene Copolymers

The effect of casting solvent on the morphology of sulfonated polystyrene‐block‐poly(ethylene‐ran‐butylene)‐block‐polystyrene (SSEBS) was investigated using transmission electron microscopy and small‐angle X‐ray scattering. Proton conductivities and methanol permeabilities were measured and the related impact on morphological changes is discussed. SSEBS is transformed from a well‐ordered lamellar to a disordered structure as the concentration of MeOH in MeOH/THF mixtures increases.     

Competition Between Interfacial Interaction and Microphase Separation in Crystallization of Filled Block Copolymers

Understanding the effect of repulsive interaction between blocks on crystallization in block copolymers is beneficial for the design and development of sophisticated nanostructures. Dynamic Monte Carlo simulations were performed to reveal the crystallization mechanism of block copolymers containing one‐dimensional nanofiller under different repulsive interaction strengths between crystallizable and noncrystallizable blocks. During crystallization, crystalline morphology is determined by the competition between segmental orientation perpendicular to microphase interfaces dominated by microphase separation and that along the direction of the long axis of the nanofiller controlled by interfacial interaction. As the repulsive interaction between different blocks is strengthened, the competition between microphase separation and interfacial interaction is intensified, eventually leading to an increase in crystallization rate and a degradation in crystalline morphology. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1516–1526     

Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

Emulsion polymerization of styrene using polystyrene‐block‐poly(ethylene oxide) macromonomers as stabilizers

New diblock macromonomers were used as reactive emulsifiers in the emulsion polymerization of styrene. The nature of the reactive group, the molecular weight, the length of the poly(ethylene oxide) (PEO) block, and the molecular structure of the macromonomer were systematically investigated during this process by analyzing the evolution of the conversion and particle diameters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2819–2827, 2002     

Well‐defined amphiphilic polymethylene‐b‐poly(acrylic acid) diblock copolymers: New synthetic strategy and their self‐assembly

Well‐defined amphiphilic polymethylene‐b‐poly (acrylicacid) diblock copolymers have been synthesized via a new strategy combining polyhomologation and atom transfer radical polymerization (ATRP). Hydroxyl‐terminated polymethylenes (PM‐OH) with different molecular weights and narrow molecular weight distribution are obtained through the polyhomologation of dimethylsulfoxonium methylides following quantitative oxidation via trimethylamine‐N‐oxide dihydrate. Subsequently, polymethylene‐based macroinitiators (PM‐MIs M_n = 1,300 g mol^?1 [M_w/M_n = 1.11] and M_n = 3,300 g mol^?1 [M_w/M_n = 1.04]) are synthesized by transformation of terminal hydroxyl group of PM‐OH to α‐haloester in ～100% conversion. ATRPs of tert‐butyl acrylate (t‐BuA) are then carried out using PM‐MIs as initiator to construct PM‐b‐P(t‐BuA) diblock copolymers with controllable molecular weight (M_n = 8,800–15,800 g mol^?1 M_w/M_n = 1.04–1.09) and different weight ratio of PM/P(t‐BuA) segment (1:1.7–1:11.2). The amphiphilic PM‐b‐PAA diblock copolymers are finally prepared by hydrolysis of PM‐b‐P(t‐BuA) copolymers and their self‐assembly behavior in water is preliminarily investigated via the determination of critical micelle concentrations, dynamic light scattering, and transmission electron microscope (TEM). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Photoinduced Fusion of Micro‐Vesicles Self‐Assembled from Azobenzene‐Containing Amphiphilic Diblock Copolymers

Poly(N‐isopropylacrylamide)‐block‐poly{6‐[4‐(4‐methylphenyl‐azo) phenoxy] hexylacrylate} (PNIPAM‐b‐PAzoM) was synthesized by successive reversible addition‐fragmentation chain transfer (RAFT) polymerization. In H₂O/THF mixture, amphiphilic PNIPAM‐b‐PAzoM self‐assembles into giant micro‐vesicles. Upon irradiation of light at 365 nm, fusion of the vesicles was observed directly under an optical microscope. The real‐time fusion process is presented and the derivation is preliminarily due to the perturbation by the photoinduced trans‐to‐cis isomerization of azobenzene units in the vesicles.

     

Effect of Cyclization of Polystyrene/Polyisoprene Block Copolymers on Their Micellar Morphology

Micelles made from linear polystyrene‐block‐polyisoprene (PS/PI) in decane are spherical. The differences in the structure of micelles made from linear and cyclic PS/PI were investigated using small‐angle X‐ray scattering at rest and under shear flow. The effect of shear revealed that micelles made from cyclic copolymer chains have an elongated shape, which was confirmed by transmission electron microscopy. The cyclization of diblock copolymer chains is thus a new method to control the micellar morphology.