Controlled Alternating Copolymerization of (Meth)acrylates and Vinyl Ethers by Using Organoheteroatom‐Mediated Living Radical Polymerization

Alternating copolymers comprised of (meth)acrylates and vinyl ethers with controlled molecular weights and polydispersities were synthesized for the first time by living radical polymerization using organotellurium, stibine, and bismuthine chain transfer agents. Combining living alternating copolymerization and living radical or living cationic polymerization afforded hitherto unavailable block copolymers with controlled macromolecular structures.

     

In‐Situ Polymerization at the Interface of Micelles: A Novel Method to Control Functionality and Morphology

A new method to control the morphology and functionality of micelles is reported. Triblock copolymer micelles with atom transfer radical polymerization initiators at the interface are prepared in aqueous solution. After in‐situ polymerization at the interface, the structures of the interface and corona change, and micelles with PDMAEMA‐PEG comb–coil coronal chains are obtained. In aqueous solution, the pH exerts an influence on the morphology of the micelles. The coronal chains adopt different conformations at different pH values. Upon drying, the two coronal chains phase separate and form nanometer‐sized domains.

     

Formation of Silica/Poly(p‐dioxanone) Microspheres by Surface‐Initiated Polymerization

A polymeric film of a biodegradable poly(p‐dioxanone) was grown from 490 nm silica particles by monolayer formation via self‐assembly of hydroxy‐terminated triethoxysilane and subsequent surface‐initiated ring‐opening polymerization of p‐dioxanone. The resulting silica/poly(p‐dioxanone) hybrid particles were characterized by means of ¹H NMR spectroscopy, IR spectroscopy, thermogravimetric analysis, field‐emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy.

     

Effects of Fluctuation and Segregation in the Rate Acceleration of ATRP Miniemulsion Polymerization

In the ATRP and SFRP miniemulsion polymerization, a particle size range may exist in which the polymerization rate is larger than that of the corresponding bulk polymerization. Here, MC simulations are applied to clarify the reason for the acceleration. It is shown that the statistical variation of the trapping agent concentration (fluctuation effect) dominates the acceleration for good living conditions, while the segregation effect is important when the bimolecular termination is significant. Even for the segregation‐dominated conditions, the polymerization rate cannot be predicted accurately without accounting for the fluctuation effect.

     

Initiator‐Grafted Silica Particles for Controlled Free Radical Polymerization: Influence of the Initiator Structure on the Grafting Density

A series of organic‐inorganic hybrid particles were synthesized by a self‐assembled layer of different initiators, immobilized on silica particles and used for controlled radical polymerization. We use three different initiator systems for atom‐transfer radical polymerization (ATRP), unimolecular nitroxide mediated polymerization (NMP), and bimolecular NMP, for the development of the hybrid inorganic/organic particles. After preliminary qualitative characterization by X‐ray spectroscopy (XPS) and Fourier‐transformed infrared (FT‐IR) measurements, the hybrid nanoparticles were studied by thermogravimetric analysis (TGA) to determine and discuss the initiator graft density in terms of steric hindrance.

The coupling agents employed for the various approaches used here: a) NMP1‐bimolecular system, b) NMP2‐unimolecular system, and c) ATRP.     

Revisiting Chain Transfer to Polymer and Branching in Controlled Radical Polymerization of Butyl Acrylate

Acrylic monomers undergo chain transfer to polymer during polymerization leading to branched and even gelled polymers. It has been experimentally demonstrated that the extent of branching is higher for conventional free radical polymerization than for controlled radical polymerization (ATRP, RAFT, NMP) and this has been qualitatively explained in terms of the differences in the concentrations of highly reactive short‐chain radicals between controlled and conventional radical polymerizations. Contrary to this explanation, in this work, it is quantitatively demonstrated that the short transient lifetime of the radicals, i.e., the time between activation and deactivation of the radical in controlled radical polymerization, is the cause for the low level of branching in these polymerizations.

     

Simulation of RAFT Dispersion Polymerization in Supercritical Carbon Dioxide

The RAFT radical polymerization of vinyl monomers in supercritical carbon dioxide was modeled using the Predici® simulation package. The sensitivity of polymerization responses on formulation and process variables was analyzed. The simulations were carried out using kinetic and physical parameters corresponding to the polymerization of methyl methacrylate in supercritical carbon dioxide, using AIBN as initiator, at 65 °C and 200 bar, and using values of the addition and fragmentation kinetic rate constants of a “typical” RAFT agent, as reference conditions. This is the first report in the literature addressing the modeling or simulation of RAFT polymerization in supercritical carbon dioxide.

     

One‐Pot Synthesis of Colloidal Nanobowls and Hybrid Multipod‐like Nanoparticles by Radiation Miniemulsion Polymerization

A facile approach is proposed to one‐pot synthesis of two kinds of nanoparticles: a new type of PS nanobowls (a hole appearing at the bottom of nanobowl) and PS/silica hybrid multipod‐like nanoparticles. The two type of nanoparticles generated together during polymerization could be separated easily by centrifugation. Furthermore, the structure of nanobowls could be easily controlled by the weight ratio of monomer/silica. In addition, we find that the multipod‐like nanoparticles play important roles in hydrophobic properties. The water contact angle increased from 24.0° to 143.3° after coated with the multipod‐like nanoparticles.

     

Hairy PEO‐Silica Nanoparticles through Surface‐Initiated Polymerization of Ethylene Oxide

Summary: The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles was performed in situ by the ring‐opening polymerization of the oxirane monomer initiated from the mineral surface using aluminium isopropoxide as an initiator/heterogeneous catalyst. Alcohol groups were first introduced onto silica by reacting the surfacic silanols with prehydrolyzed 3‐glycidoxypropyl trimethoxysilane. The alcohol‐grafted silica played the role of a coinitiator/chain‐transfer agent in the polymerization reaction and enabled the formation of irreversibly bonded polymer chains. Silica nanoparticles containing up to 40 wt.‐% of a hairy layer of grafted PEO chains were successfully produced by this technique.

The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles by in‐situ ring‐opening polymerization of the oxirane monomer.     

Chain Transfer and Efficiency of End‐Group Introduction in Free Radical Polymerization of Methyl Methacrylate in the Presence of Poly(methyl methacrylate) Macromonomer

Summary: Experimental and modeling studies of addition–fragmentation chain transfer (AFCT) during radical polymerization of methyl methacrylate in the presence of poly(methyl methacrylate) macromonomer with 2‐carbomethoxy‐2‐propenyl ω‐ends (PMMA‐CO₂Me) at 60 °C are reported. The results revealed that AFCT involving PMMA‐CO₂Me formed in situ during methyl methacrylate polymerization has a negligible effect on the molecular weight distribution.

     

Nitroxide‐Mediated Radical Polymerization in Dispersed Systems: Compartmentalization and Nitroxide Partitioning

Compartmentalization and nitroxide partitioning in NMP in dispersed systems have been investigated by modeling and simulations. Compartmentalization comprises the segregation effect on termination and the confined space effect on deactivation. Under certain conditions, it is possible to obtain an improvement in both control and livingness. The particle size threshold for compartmentalization, decreases with any system change that leads to a decrease in the number of propagating radicals and/or nitroxides per particle, and vice versa. There is direct competition between the confined space effect on deactivation and nitroxide exit–the more water‐soluble the nitroxide, the weaker the confined space effect. Nitroxide partitioning leads to an increase in polymerization rate and loss in control/livingness.

     

Progress in Computer Simulation of Bulk,Confined, and Surface‐initiated Polymerizations

In this article we provide a brief summary of computational techniques applied to investigate polymerization reactions in general, with a focus on systems under confinement and initiated from surfaces. We concentrate on two major classes of techniques, i.e., stochastic methods and molecular modeling. We describe the major principles of the two classes of methodologies and point out their strengths and weaknesses. We review a variety of studies from the literature and conclude with an outlook of these two classes of computer simulation approaches as they are applied to “grafting from” polymerizations.

     

AGET ATRP in the Presence of Air in Miniemulsion and in Bulk

Summary: The recently developed initiation system, activators generated by electron transfer (AGET), is used in atom transfer radical polymerization (ATRP) in the presence of a limited amount of air. Ascorbic acid and tin(II ) 2‐ethylhexanoate are used as reducing agents in miniemulsion and bulk, respectively. An excess of reducing agent consumes the oxygen present in the system and, therefore, provides a deoxygenated environment for ATRP. ATRP of butyl acrylate is successfully carried out in miniemulsion and in the presence of air. During polymerization the radical concentration remains constant. The polymerization reaches over 60% monomer conversion after 6 h, which results in polymers with a predetermined molecular weight = 14 000 g · mol⁻¹ and a low polydispersity ( = 1.23). AGET ATRP of styrene is also successful in bulk in the presence of air, as evidenced by linear semi‐logarithmic kinetics, which leads to polystyrene with an of 13 400 g · mol⁻¹ and a low polydispersity index ( = 1.14).

Appearance of miniemulsion before and after the reducing agent ascorbic acid was added (left); and GPC traces representing molecular weights during the AGET ATRP of BA in miniemulsion in the presence of air (right).     

Tuning Surface Wettability of Poly(3‐sulfopropyl methacrylate) Brushes by Cationic Surfactant‐Driven Interactions

In this communication, polyanionic poly(potassium 3‐sulfopropyl methacrylate) (PSPM) brushes were switched from hydrophilic to hydrophobic by exchange of the counter cations. First, poly(potassium 3‐sulfopropyl methacrylate) brushes were grown by means of atom transfer radical polymerization (ATRP) from thiol monolayers of initiating ω‐mercaptoundecyl bromoisobutyrate and mixed monolayers of thiol initiator and 1‐undecanothiol (blank thiol) attached to gold surfaces. The kinetics of the polymerization reaction were followed by means of the quartz microbalance technique with dissipation (QCM‐D). The collapse of PSPM brushes in the presence of cationic surfactants like quaternary ammonium salts (tetraethylammonium bromide, hexadecyltrimethylammonium bromide) and imidazolium salts (1‐dodecyl‐3‐methylimidazolium bromide, 1H,1H,2H,2H‐perfluoro‐1‐decyl‐3‐methylimidazolium bromide) was shown by QCM‐D. Water contact angle measurements proved that the wettability of the surface could be tuned reversibly from hydrophilic values (<30 °) to hydrophobic ones (>85 °).

     

Low‐Temperature Growth of Thick Polystyrene Brushes via ATRP

Summary: This contribution describes the graft polymerization of polystyrene (PS) by atom transfer radical polymerization at 50, 60, and 75 °C. Thick PS brushes were grown from initiator‐functionalized PGMA layers on silicon, and constant growth rates provide indirect evidence that the polymerizations were controlled.

Formation of polystyrene brushes at T < T_g by ATRP of styrene from α‐bromoester initiator‐functionalized poly(glycidyl methacrylate) layers.     

PMMA/Zinc Oxide Nanocomposites Prepared by In‐Situ Bulk Polymerization

Summary: Dispersing surface‐modified zinc oxide nanoparticles (ZnO) in methyl methacrylate (MMA) improves the free radical bulk polymerization process as well as the thermal stability of the formed polymer. Hydroxy groups available on the ZnO surface may induce a degenerative transfer. This suppresses the gel effect, which leads to a better control of the heat evolution during the late stages of polymerization. The formation of chains having vinylidene end groups and head‐to‐head links is suppressed, which shifts the onset of thermal decomposition to the regime where decomposition occurs by random chain scission.

Thermal degradation profiles of PMMA and its composite with ZnO at 11 wt.‐%.     

Living Radical Polymerization as a Tool for the Synthesis of Polymer‐Protein/Peptide Bioconjugates

Combinations of synthetic and natural macromolecules offer a route to new functional materials. While biological and polymer chemistry may not be natural bedfellows, many researchers are focusing their attention on the benefits of combining these fields. Recent advances in living radical polymerization have provided methods to build tailor‐made macromolecular moieties using relatively simple processes. This has led to a plethora of block copolymers, end‐functional polymers and polymers with a whole range of biological recognition abilities. This review covers work carried out until late 2006 combining living radical polymerization with proteins and peptides in the rapidly‐expanding field of bioconjugation.

     

Rapid Ring‐Opening Polymerization of D,L‐Lactide by Microwaves

Summary: Poly(D ,L ‐lactide) with a molar mass of 10⁵ g · mol⁻¹ and a yield over 90% was produced in 10 min by the ring‐opening polymerization of D ,L ‐lactide under microwave irradiation with forward power of 255 W. A degradation of the poly(D ,L ‐lactide) was also induced by microwaves with a power level over 340 W. The molar mass of poly(D ,L ‐lactide) was dependent upon the competition between the polymerization of D ,L ‐lactide and the degradation of the resulting polymer.

Profiles of molar mass versus microwave irradiation time (1.8 g DLLA, 0.1% Sn(Oct)₂).     

Kinetic Analysis of the Amphiphilic Star Block Copolymerization

A kinetic model of the amphiphilic star block copolymerization is developed. The star polymer species, resulting from star polymerization with dendrimer cores and hydrophobic monomers, are used as macroinitiators and initiate the graft polymerization of the hydrophilic monomers. Analytical expressions for the size distributions for the species formed in every step are derived. The method with monomers added to the reaction system in batches decreases the polydispersity index for the products obtained. It reaches a minimum if the monomer feed quantity is equal in every step. Therefore, the dimension and structure of the amphiphilic star block copolymers produced can be designed by using the proposed kinetic mechanism.