Simultaneous Preparation of PI/POSS Semi‐IPN Nanocomposites

Summary: This investigation presents a simultaneous and convenient approach to produce a high‐performance polyimide with a low dielectric constant by introducing the octa‐acrylated polyhedral oligomeric silsesquioxane (methacrylated‐POSS) into a polyimide matrix to form polyimide semi‐interpenetrating polymer network (semi‐IPN) nanocomposites. The differential scanning calorimetry (DSC) and Fourier‐transform infrared (FT‐IR) results indicate that the self‐curing of methacrylated‐POSS and the imidization of polyamic acid (PAA) occurs simultaneously. The morphology of a semi‐IPN structure of polyimide/POSS‐PI/POSS nanocomposites with POSS nanoparticles embedded inside the matrix is elucidated. The POSS particles are uniform and are aggregated to a size of approximately 50–60 nm inside the polyimide matrix. The interconnected POSS particles are observed at high POSS content. The structure is highly cross‐linked, so the PI/POSS nanocomposites have an enhanced glass transition temperature. The high porosity of the PI/POSS nanocomposites markedly reduces the dielectric constant of PI because of the nanometer‐scale porous structure of POSS.

FT‐IR spectra of the various compounds of A) methacrylate‐POSS before curing, B) methacrylate‐POSS after curing, C) PAA containing 15 wt.‐% POSS, and D) PI/POSS containing 15 wt.‐% POSS.     

Hybrid Nanocomposite Films from Mono‐ and Multi‐Functional POSS Copolyacrylates in Miniemulsion

Summary: The synthesis of aqueous dispersions of hybrid acrylic copolymer particles with either a monofunctional or a multifunctional polyhedral oligomeric silsesquioxane methacrylate comonomer has been performed by free radical heterophase polymerization. The miniemulsion process gives stable latexes, whereas the less controlled emulsion route results in colloidal instability of the products. The thermal and mechanical properties of the nanocomposite latex films have been preliminarily investigated.

The nanocomposite latex particles based on hybrid copolyacrylates with highly dispersed POSS cages.     

Organically Modified Layered Titanate: A New Nanofiller to Improve the Performance of Biodegradable Polylactide

Summary: The preparation and characterization of a new type of nanocomposite material that is based on biodegradable polylactide (PLA) and organically modified layered titanate, is reported. Layered titanate, modified with a N‐(cocoalkyl)‐N,N‐[bis(2‐hydroxyethyl)]‐N‐methylammonium cation, was used as a new nanofiller (OHTO) for the nanocomposite preparation. Wide‐angle X‐ray diffraction and transmission electron microscopy (TEM) analyses confirmed that titanate layers were intercalated and nicely distributed in the PLA matrix. The materials properties of neat PLA improved remarkably after nanocomposite preparation.

UV/vis transmission spectra of neat PLA and a nanocomposite.     

Poly(4‐vinylpyridine) Nanocrosslinked by Polyhedral Oligomeric Silsesquioxane

Summary: Octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) was used as the crosslinking agent to prepare the nanocrosslinked poly(4‐vinylpyridine) (P4VP) with POSS content up to 55.2 wt.‐%. The formation of the crosslinked structure is ascribed to the macromolecular reaction between pyridine rings of P4VP and epoxide groups of OpePOSS. The POSS‐crosslinked P4VP displayed enhanced glass transition temperatures (T_gs) and an improved thermal stability in terms of the results of thermal analysis.

Crosslinking of poly(4‐vinylpyridine) with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane.     

Cooperative Self‐Assembly of Nanoparticle Mixtures in Lamellar Diblock Copolymers: A Dissipative Particle Dynamics Study

Summary: Dissipative particle dynamics simulations are performed on the distribution of binary nanoparticle mixtures in lamellar diblock copolymers. The results show that the self‐assembly of nanoparticle mixtures in polymer matrix is a cooperative assembly that is affected by various factors, providing molecular‐level information for the rational design of new polymer nanocomposites with tailored properties.

The simulated polymer nanocomposite structure (the polymer matrix was omitted for clarity; P, gray; Q, black).     

A New Route for the Preparation of Brain‐Like Nanostructured Polyaniline

A novel approach has been explored to prepare brain‐like polyaniline (PANI) nanostructures with many convolutions (140–170 nm in average diameter) using aniline/citric acid (CA) salt as the template and chlorine gas as the oxidant by a gas/solid reaction for the first time. The method provided here differs significantly from the traditional one in which the polymerization of PANI is usually carried out in acidic solution.

     

Self‐Assembly of Cylinder‐Forming ABA Triblock Copolymers under Cylindrical Confinement

The self‐assembly of two types of linear ABA triblock copolymers confined in cylindrical nanopores is studied using simulated annealing. The effects of pore size and block copolymer chain architecture on morphology, chain conformations and bridging fraction are investigated. For the bulk cylinder‐forming copolymers, novel structures such as helices and stacked toroids form, which depend sensitively on the pore size. Several significant differences between the two types of copolymers are predicted and explained based on the differences in their chain conformations and chain architectures. A simple model is proposed to explain the mean square radius of gyration for the bridge and loop chains.

     

Self‐Organizing Alignment of Carbon Nanotubes in Thermoplastic Polyurethane

Summary: A simple compounding technique for the fabrication of polymer nanocomposites with single‐walled carbon nanotubes having exceptional alignment and improved mechanical properties is described. The aligned‐nanotube composite was prepared by dissolving single‐walled carbon nanotubes in a solution of thermoplastic polyurethane and tetrahydrofuran. Solvent‐polymer interactions that induce the orientation of soft chain segments during the swelling and moisture curing stage are believed to serve as a driving force for the macroscopic alignment of the carbon nanotubes.

Alignment of single‐walled carbon nanotubes in thermoplastic polyurethane during polar solvent exposure.     

Symmetric Versus Asymmetric “Homologous” Vinylic Cross‐Linkers in Two‐Components Networks: Formation of Pseudo‐Conetworks or Pseudo‐IPNs

Radical copolymerizations of heterologous comonomers are compositionally heterogeneous, unless the reaction is performed in continuous conditions. A bicomponent network prepared from a heterogeneous reaction like the mentioned before is therefore a complex structure where chains with different compositions are linked through the cross‐linker molecules. It is theoretically shown here that the use of cross‐linkers with different structural homologies toward the two comonomers may lead to very different topologies. Thus, a mixture of symmetric cross‐linkers, each one homologous to each comonomer, tends to form interpenetrated networks (IPNs). However, the use of a single bihomologous asymmetric cross‐linker, where each of the functionalities is homologous toward each of the comonomers, tends to form conetworks. It is shown here that the higher the differential reactivity between the groups, the higher is the tendency toward these extreme structures.

     

Stepwise Self‐Assembly of P3HT/CdSe Hybrid Nanowires with Enhanced Photoconductivity

A facile approach to prepare poly(3‐hexylthiophene) (P3HT)/cadmium selenide quantum dot (CdSe QD) hybrid coaxial nanowires by a stepwise self‐assembly process is reported. P3HT nanowires of ≈20 nm diameter are first prepared by self‐assembly in a poor solvent such as cyclohexanone, and then as‐prepared CdSe QDs are deposited compactly onto the P3HT nanowires by non‐covalent interactions between P3HT and CdSe. When illuminated with white light, the hybrid nanowires show enhanced photoconductivity compared with the pristine P3HT nanowires and the blended nanocomposites.

     

A Novel Route to Organic–Inorganic Hybrid Nanomaterials

The in situ formation of functionalized silica nanoparticles is reported. The reactive stabilizers used in the study, [3‐(2‐bromoisobutyryl)propyl]triethoxysilane and [3‐(2‐bromoisobutyryl)propyl]ethoxydimethylsilane, have an atom transfer radical polymerization (ATRP) initiator at the noncondensable end. Condensation with tetraethoxysilane yields silica nanoparticles with a surface‐immobilized initiator. The size of these functionalized silica nanoparticles can be controlled by varying the time of initiator addition and initiator concentration. The silica particle sizes ranged from 10 to 300 nm. With the initiator functionalized silica nanoparticles, ATRP synthesis was performed with styrene, tert‐butyl acrylate, and methyl acrylate to produce organic–inorganic nanomaterials.

     

A Water‐Soluble π‐Conjugated Polymer with up to 100 mg · mL−1 Solubility

A cationic water‐soluble polyfluorene (P2) containing a high density of tetraalkylammonium side chains in polymer backbone was synthesized and characterized. The polymer shows excellent water solubility up to 100 mg · mL⁻¹ as well as high photoluminescence (PL) quantum yield of 44% in water. The relatively high cationic density and appropriate side chain length of the polymer are the key factors to achieve such high water solubility. The reduction potential of P2 is decreased as compared with its neutral polymer, reflecting the enhanced electron injection abilities. The standard NPB/Alq₃ device using such a polymer as the electron injection layer shows nearly three‐fold enhancement in the electroluminescence (EL) efficiency.

     

Synthesis and Characterization of Thermally Curable Benzoxazine‐Functionalized Polystyrene Macromonomers

Summary: Thermally curable benzoxazine ring‐containing polystyrene macromonomers were synthesized and characterized. 1,4‐Dibromo‐2,5‐bis(bromomethyl)benzene and 1,4‐dibromo‐2‐(bromomethyl)benzene were used as initiators in the atom transfer radical polymerization of styrene. The resulting polymers were used in combination with 3‐aminophenylboronic acid hemisulfate, for a Suzuki coupling. The obtained polymers, with amino groups in the middle or end of the chains, were reacted with formaldehyde and phenol to yield benzoxazine ring‐containing macromonomers. In addition to the glass transition temperature of the polystyrene segment observed at ca. 105 °C, differential scanning calorimetry thermograms exhibit an exotherm at ca. 276 °C corresponding to the oxazine thermal polymerization. Both macromonomers undergo thermal curing with the formation of thermosets having polystyrene segments.

Structure of the benzoxazine‐functionalized polystyrene.     

A New Strategy to Exfoliate Silicone Rubber/Clay Nanocomposites

Summary: A new strategy was developed to prepare disorderly exfoliated nanocomposites, in which a soft siloxane surfactant with a weight‐average molecular weight ( ) of 1 900 was adopted to modify the clay. The modified clay slurry was then mixed with silicone rubber by hand, and exfoliation was achieved. The proposed mechanism thereof was verified by TEM and XRD. The physical entanglement of the soft siloxane surfactant plays a vital role in the diffusion and intercalation of the matrix molecules during the compounding of the slurry‐polymer mixture. This simple method is applicable to other silicone‐based materials reinforced by clay.

TEM micrograph of silicone rubber/clay‐sil nanocomposite.     

Low‐Temperature Growth of Thick Polystyrene Brushes via ATRP

Summary: This contribution describes the graft polymerization of polystyrene (PS) by atom transfer radical polymerization at 50, 60, and 75 °C. Thick PS brushes were grown from initiator‐functionalized PGMA layers on silicon, and constant growth rates provide indirect evidence that the polymerizations were controlled.

Formation of polystyrene brushes at T < T_g by ATRP of styrene from α‐bromoester initiator‐functionalized poly(glycidyl methacrylate) layers.     

Preparation of Poly(ε‐caprolactone)/Clay Nanocomposites by Microwave‐Assisted In Situ Ring‐Opening Polymerization

PCL/clay nanocomposites were prepared by microwave‐assisted in situ ROP of ε‐caprolactone in the presence of either unmodified clay (Cloisite® Na⁺) or clay modified by quaternary ammonium cations containing hydroxyl groups (Cloisite 30B). This PCL showed significantly improved monomer conversion and molecular weight compared with that produced by conventional heating. An intercalated structure was observed for the PCL/Cloisite Na⁺ nanocomposites, while a predominantly exfoliated structure was observed for the PCL/Cloisite 30B nanocomposites. Microwave irradiation proved to be an effective and efficient method for the preparation of PCL/clay nanocomposites.

     

Modeling the Interactions between Membranes and Inclusions: Designing Self‐Cleaning Films and Resealing Pores

The design of responsive membranes whose interactions with inclusions can be controlled through the application of an external stimulus is reviewed with the aim to establish guidelines for introducing functionality into the materials. For a photo‐reactive AB membrane, we find that a gradient in light intensity can be harnessed to clean the system of any C “impurities”, or target the delivery of C to specific locations. By modeling the interactions between a lipid bilayer and Janus nanoparticles, we design a synthetic membrane with stable pores that can be controllably opened and closed. This leads to design rules for creating nanoparticle‐bilayer assemblies where the pores open and the cargo is released only when local environmental conditions reach a critical value.

     

Synthesis of POSS‐Functionalized Polyisobutylene via Direct Initiation

POSS‐functionalized polyisobutylenes (PIBs) were synthesized by carbocationic polymerization using an epoxy‐POSS/TiCl₄ initiating system in hexane/methyl chloride (60:40 v/v) solvent mixture at −80 °C. ¹H NMR spectroscopy verified the incorporation of one epoxy‐POSS per polymer chain. Light scattering and TEM analysis demonstrated the formation of 50–100 nm sized aggregates and micron‐sized clusters.