Synthesis with Single Macromolecules: Covalent Connection between a Neutral Dendronized Polymer and Polyelectrolyte Chains as well as Graphene Edges

Single chains of a neutral, dendronized polymer with peripheral azide groups ( PG3A ) are co‐deposited onto molecularly modified graphite substrates with a positively charged dendronized polymer ( PG2 ) as well as with negatively charged plasmid dsDNA. PG3A is also prepared near graphite step‐edges. Single PG3A chains are moved with a scanning force microscope tip, into close contact with either of the two polyelectrolytes, as well as the step‐edge at predetermined positions. Treating these structures in situ with UV light leads to photochemically induced cross‐linking between the PG3A chains carrying azide groups and PG2 , dsDNA, and graphite step‐edges, respectively, which is proven by mechanically challenging the “welding” points by pulling on the molecules with the SFM‐tip.

     

Novel C60‐Anchored Two‐Armed Poly(tert‐butyl acrylate): Synthesis and Characterization

Summary: A multistep synthetic procedure for preparing novel C₆₀‐anchored two‐armed poly(tert‐butyl acrylate) was developed. First, two‐armed poly(tert‐butyl acrylate) bearing a malonate ester core with well‐controlled molecular weight was synthesized through atom transfer radical polymerization. The effective Bingel reaction between C₆₀ and the well‐defined polymer was then carried out to yield C₆₀‐anchored polymer. GPC, ¹H NMR, and UV‐vis spectroscopy indicated that the C₆₀‐anchored polymer was a monosubstituted and ‘closed’ 6,6‐ring‐bridged methanofullerene derivative.

Schematic of a novel C₆₀‐anchored two‐armed polymer.     

Enzymatic Ring‐Opening Polymerization of Oxiranes and Dicarboxylic Anhydrides

Oxiranes, such as glycidyl phenyl ether, benzyl glycidate, glycidyl methyl ether, and styrene oxide, were copolymerized with dicarboxylic anhydrides, such as succinic anhydride, phthalic anhydride, and maleic anhydride, by the action of an enzyme in a stepwise reaction to produce the corresponding polyesters containing some ether linkages having a maximum M _w of 13 500. Oxiranes, such as glycidol and glycidyl phenyl ether, were also homopolymerized and copolymerized with other oxiranes by the enzyme to produce the corresponding polyethers.

Enzymatic polymerization of oxiranes and dicarboxylic anhydrides.     

Solvent Influence on Propagation Kinetics in Radical Polymerizations Studied by Pulsed Laser Initiated Polymerizations

The influence of the reaction medium (organic solvents, water, ionic liquids, supercritical CO₂) on the propagation rate in radical polymerizations has very different causes, e.g., hindered rotational modes, hydrogen bonding or electron pair donor/acceptor interactions. Depending on the origin of the solvent influence propagation rate coefficients, k_p, may be enhanced by up to an order of magnitude associated with changes in the pre‐exponential or the activation energy of k_p. In contrast, non‐specific interactions, size and steric effects lead to rather small changes in the vicinity of the radical chain end and are reflected by modest variations in k_p.

     

Phase Transition Behaviors of Self‐Oscillating Polymer and Nano‐Gel Particles

Summary: Self‐oscillating polymers and nano‐gel particles consisting of N‐isopropylacrylamide and the ruthenium catalyst of the Belousov‐Zhabotinsky reaction have been prepared. In order to clarify the crosslinking effect on the self‐oscillating behavior, the phase transition behaviors were investigated by measuring the transmittance and the fluorescence intensity of the polymer solution and the gel bead suspension. Cooperative effects due to crosslinking will play an important role for the design of nanoactuators.

Chemical structure of poly(NIPAAm‐co‐Ru(bpy)₃).     

Construction of Large‐Scale Highly Ordered Macroporous Monoliths of π‐Conjugated Polymers

Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.

     

Copolymerization of Hepta‐1,6‐diene with Ethylene Catalyzed by Cobalt Complexes

Copolymerization of hepta‐1,6‐diene with ethylene using a cobalt–bis(imino)pyridine complex affords a polymer that contains trans‐1,2‐five‐membered rings in the repeating unit from hepta‐1,6‐diene. The ratio of the repeating units of diene to those of ethylene is controlled from 3: 97 to 50:50, depending on the reaction conditions. Isotope‐labeling reactions reveal that the major chain transfer pathway involves β‐hydrogen elimination of the polymer end formed after ethylene insertion.

     

Design of a Linear Poly(3‐hexylthiophene)/Fullerene‐Based Donor‐Acceptor Rod‐Coil Block Copolymer

Novel fullerene‐grafted poly(3‐hexylthiophene) (P3HT)‐based rod‐coil block copolymers have been synthesized. The regioregular P3HT rod block has been synthesized by a modified Grignard metathesis reaction (GRIM). An original in situ end‐capping reaction has been developed in order to convert the P3HT block into an efficient macro‐initiator for the nitroxide‐mediated radical polymerization (NMRP) of the coil block. Controlled radical polymerization of the second poly(butylacrylate‐stat‐chloromethylstyrene) [P(BA‐stat‐CMS)] block has been done through various conditions leading to different coil block lengths. The final electron donor‐acceptor block copolymer has been obtained after C₆₀ grafting in soft conditions. Copolymers have been characterized by ¹H NMR and size exclusion chromatography. Optical characterizations, before and after C₆₀ grafting, are reported.

     

Synthesis of Poly(glycidyl methacrylate)‐block‐Poly(pentafluorostyrene) by RAFT: Precursor to Novel Amphiphilic Poly(glyceryl methacrylate)‐block‐Poly(pentafluorostyrene)

Poly(glycidyl methacrylate) (PGMA) was synthesized by the RAFT method in the presence of 2‐cyanoprop‐2‐yl dithiobenzoate (CPDB) chain transfer agent using different [GMA]/[CPDB] molar ratios. The living radical polymerization resulted in controlled molecular weights and narrow polydispersity indices (PDI) of ≈1.1. The polymerization of pentafluorostyrene (PFS) with PGMA as the macro‐RAFT agent yielded narrow PDIs of ≤1.2 at 60 °C and ≤1.5 at 80 °C. The epoxy groups of the PGMA block were hydrolyzed to obtain novel amphiphilic copolymer, poly(glyceryl methacrylate)‐block‐poly(pentafluorostyrene) [PGMA(OH)‐b‐PPFS]. The PGMA epoxy group hydrolysis was confirmed by ¹H NMR and FTIR spectroscopy. DSC investigation revealed that the PGMA‐b‐PPFS polymer was amorphous while the PGMA(OH)‐b‐PPFS displayed a high degree of crystallinity.

     

Water‐Soluble Methyl Orange Fibrils as Versatile Templates for the Fabrication of Conducting Polymer Microtubules

One‐dimensional methyl orange fibrils can be easily prepared. They are stable in acidic aqueous solutions and soluble in neutral water. When used to synthesize conducting polymer microtubules, the fibrils act as “hard templates” formally but as “soft templates” effectively. Microtubular structures of polypyrrole, polyaniline, and poly(3,4‐ethylenedioxythiophene) have been achieved successfully via such water‐soluble versatile templates.

     

Preparation of a Polyethylene Latex by Catalytic Hydrogenation of a Polybuta‐1,4‐diene‐Based Dispersion

Summary: Fully linear polyethylene‐based latexes have been prepared by the hydrogenation of polybuta‐1,4‐diene dispersions. The latter were synthesized via dispersion ring‐opening metathesis polymerization of cycloocta‐1,5‐diene, and hydrogenated using RuCl₂(PPh₃)₃ as catalyst, without any further treatment. A high hydrogenation efficiency was achieved as demonstrated by different techniques including DSC, and ¹H NMR and FT‐IR spectroscopy. The hydrogenation process could be carried out without detrimental effect on particle size and colloidal stability as evidenced by optical microscopy and light scattering analysis.

Optical microscopy photograph of a polybutadiene‐based dispersion after hydrogenation. No change in size is observed.     

Synthesis of a New Thiophene/Quinoxaline CT‐Type Copolymer with High Solubility and Its Basic Optical Properties

A new π‐conjugated charge‐transfer‐type copolymer of electron‐donating thiophene and electron‐accepting quinoxaline was prepared by organometallic polycondensation. The polymer was soluble in organic solvents such as tetrahydrofuran, and showed a UV‐vis peak at long wavelengths of 598 nm in chloroform and 629 nm in the film. Its film exhibited a χ⁽³⁾ peak in the resonance region with a χ⁽³⁾ value comparable to that of regioregular head‐to‐tail poly(3‐hexylthiophene‐2,5‐diyl).

     

Enzyme‐Catalyzed Ring‐Opening Polymerization of Unsubstituted β‐Lactam

The synthesis of poly(β‐alanine) by Candida antarctica lipase B immobilized as novozyme 435 catalyzed ring‐opening of 2‐azetidinone is reported. After removal of cyclic side products and low molecular weight species pure linear poly(β‐alanine) is obtained. The formation of the polymer is confirmed with ¹H NMR spectroscopy and MALDI‐TOF mass spectrometry. The average degree of polymerization of the obtained polymer is limited to = 8 by its solubility in the reaction medium. Control experiments with β‐alanine as a substrate confirmed that the ring structure of the 2‐azetidinone is necessary to obtain the polymer.

     

Gold Nanoparticles Functionalized by a Dextran‐Based pH‐ and Temperature‐Sensitive Polymer

A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.

     

Magnetic Molecularly Imprinted Polymer Particles Synthesized by Suspension Polymerization in Silicone Oil

Summary: Magnetic nanoparticles have been prepared by a co‐precipitation method and modified with methacryloxypropyltrimethoxysilane. Magnetic molecularly imprinted polymer particles have been prepared by suspension polymerization in silicone oil. The particles possess a high affinity to the template molecules and are rapidly separated under a magnetic field.

SEM photograph of magnetic MIP particles.     

Effect of Molecular Weight on Photoinduced Birefringence in a Chiral Liquid Crystalline Azodye Polymer

Summary: The evolution of the photoinduced birefringence in thin films of narrow polymer fractions is studied and compared with the behavior of the non‐fractionated polymer. The Δn_ind value decreases by increasing the degree of polymerization ( ) within the oligomeric range but becomes independent of molecular weight starting from a of ≈70. Thermal pretreatment of the films results in higher photoinduced birefringence. The films show good stability of the photorecording.

Birefringence induced after 10 min, Δn_ind(600) and its growth rate at the same moment versus molecular weight.     

Direct Synthesis of Poly(dimethylsiloxane) Copolymers with TPE‐Properties via CuAAC (Click Chemistry)

Poly(dimethylsiloxane) copolymers were synthesized directly from AA/BB monomers employing a CuAAC reaction (click chemistry) in a polyaddition approach. Using organic dialkynes and oligo(siloxane)s end‐functionalized with azide moieties it was possible to obtain siloxane‐based copolymers with TPE properties by click chemistry for the first time. As seen from DSC experiments, properties were strongly dependent on the incorporated organic comonomer.

     

The Peculiar Response of DNA Hydrogel Fibers to a Salt and pH Stimulus

DNA hydrogels which are composed of an entangled network without a crosslinker are synthesized and examined in regards to their sensitivity to salt and pH changes. The DNA hydrogel fibers only exhibited a marked response – that is a fast and large change in length – under biological conditions ([Na⁺] = 0.15 M at pH = 7) and are therefore suitable materials for bio‐inspired devices.

     

Supercritical Carbon Dioxide‐Treated Electrospun Poly(vinylidene fluoride) Nanofibrous Membranes: Morphology,Structures and Properties as an Ionic‐Liquid Host

A reverse‐barrier technique is used to enable the treatment of electrospun poly(vinylidene fluoride) nanofibrous membranes with supercritical carbon dioxide. The treatment induces the formation of nanopores and extended‐chain β crystallites of small lateral dimensions in the nanofibers. It also creates interfiber junctions, resulting in a remarkable improvement in mechanical properties of the membranes. The treated membranes are able to retain their shape very well after loading with an ionic liquid (IL). The ionic conductivity of the IL‐loaded membrane is very close to that of the neat IL.