We report a new type of step‐growth radical addition‐coupling polymerization (RACP) involving consecutive addition of carbon‐centered radical derived from α,α′‐dibromo dibasic ester to NO double bond of C‐nitroso compound followed by cross‐coupling of carbon‐centered radical and in situ formed nitroxyl radical, which produces alternating copolymers with high molecular weight and unimodal molecular weight distribution from saturated and unsaturated monomers.
In this work, we report the design of a new multi‐functional, water‐soluble conjugated polymer integrating both a DNA intercalator and a redox label. Based on this multi‐functional conjugated polymer, we develop a sequence‐specific electrochemical DNA sensor, where the acridine unit serves as the basis for sequence discrimination, and the ferrocene label provides the electrochemical signal. Moreover, the conjugated polythiophene helps transfer electrons from ferrocene to the electrode. This sensor provides a new way for rapid and convenient detection of DNA targets.
A new versatile synthesis strategy for macromonomers has been developed that uses the living ring‐opening metathesis polymerization (ROMP) with commercial Grubbs first generation ruthenium initiators. Homopolymers as well as diblock copolymers were end‐functionalized with norbornene derivatives to serve as macromonomers. The graft copolymerization of the macromonomers was also carried out employing ROMP. Well‐defined and highly functional graft copolymers are accessible by this new synthetic route.
Summary: The synthesis of aqueous dispersions of hybrid acrylic copolymer particles with either a monofunctional or a multifunctional polyhedral oligomeric silsesquioxane methacrylate comonomer has been performed by free radical heterophase polymerization. The miniemulsion process gives stable latexes, whereas the less controlled emulsion route results in colloidal instability of the products. The thermal and mechanical properties of the nanocomposite latex films have been preliminarily investigated.
The nanocomposite latex particles based on hybrid copolyacrylates with highly dispersed POSS cages. 相似文献
Summary: A numerical method is presented for simulating charged colloidal dispersions in electrolyte solutions. Utilizing a smoothed profile for colloid‐solvent boundaries, efficient mesoscopic simulations are enabled for modeling dispersions of many colloidal particles exhibiting many‐body electrostatic interactions. The validity of the method was examined for simple colloid geometries, and the efficiency was demonstrated by calculating stable structures of two‐dimensional dispersions, which resulted in the formation of colloidal crystals.
Solid‐state complexation of syndiotactic polystyrene (sPS) with a crown ether compound, 1,4,7,10‐tetraoxa‐cyclododecane (12‐crown‐4), took place when a film of sPS/chloroform clathrate was subjected to a guest exchange procedure assisted with a plasticizing agent. The new guest 12‐crown‐4 molecules were incorporated into the crystalline region of the sPS film, without causing a large conformational change of host sPS helices. X‐ray diffraction and thermogravimetric investigations showed that sPS/12‐crown‐4 complex had a clathrate complex structure which contained four 12‐crown‐4 molecules per unit cell. IR and Raman data suggested that 12‐crown‐4 took a Ci‐type conformation in the sPS complex phase.
Polymerized ionic liquid (PIL) nanoparticles are for the first time applied as sole stabilizers in aqueous emulsion polymerization and reveal an astonishing and unexpected behavior. In a well‐dispersed state, the PIL nanoparticles serve as an unexpectedly effective stabilizer for polystyrene dispersions, enabling solids content of greater than 40%. However, the same PIL as dry powder is hydrophobic and, in accordance with Bancroft's rule, unable to stabilize aqueous dispersions. This ambivalent behavior of PIL is extremely beneficial for the application of aqueous dispersions because, as desired for decades, the hydrophilic dispersed state during synthesis turns hydrophobic in the dried state during application of the polymer.
This review covers the literature concerning the modification of polysaccharides through controlled radical polymerizations (NMP, ATRP and RAFT). The different routes to well‐defined polysaccharide‐based macromolecules (block and graft copolymers) and graft‐functionalized polysaccharide surfaces as well as the applications of these polysaccharide‐based hybrids are extensively discussed.
Low‐cost, responsive poly(N‐isopropylacrylamide)/polystyrene composite films were prepared by a facile electrospinning technique. The surface structures and wettabilities of the composite films are tunable by simply controlling the concentration of polymer. With a proper proportion of each polymer, the wettability of the surface can be switched between superhydrophilicity and superhydrophobicity when the temperature is changed from 20 °C to 50 °C. The combination of a stimuli‐responsive polymer with micro/nanostructures on the surface of the composite film contributes to this unique surface property.
Fast‐degrading, salicylate‐based poly(anhydride‐esters) were designed to degrade and release the active component, salicylic acid (SA), within 1 week. The polymer degradation was enhanced by using shorter or oxygen‐containing aliphatic chains. A copolymer of diglycolic acid was also made with a salicylate‐based diacid for comparison of polymer properties, including SA release. Both methods resulted in polyanhydrides with molecular weights ranging from 14 500 to 27 800 Da and displayed glass transition temperatures near physiological conditions, namely 33–40 °C. The homo‐ and copolymers completely degraded within one week releasing the chemically incorporated SA.
A novel chlorotitanium calix[4]arene complex was synthesized and tested, without activator, as catalyst for the polymerization of L ‐ and rac‐lactide under solvent‐free conditions. The catalyst displayed high activity, which depended on the monomer‐to‐catalyst molar ratio, and led to highly isotactic PLLA. Despite concomitant transesterification during the polymerization, polylactide formation was well‐controlled, the molar mass distribution indexes remaining in the restricted range of 1.2–1.4.
Summary: A new computational algorithm for dynamic lattice Monte Carlo simulations of the associative behavior of heteroarm copolymers in selective solvents was developed and optimized for efficient and relatively fast simulation studies. The algorithm is based on the Siepmann and Frenkel variant of the bias self‐avoiding walk procedure. Simultaneously, a new criterion for recognition of an associate was proposed. The first results on the micellization of heteroarm star copolymers are presented.
The synthesis of branched macromolecules from renewable resources via olefin metathesis is described. We observed that it is possible to control the molecular weight during the acyclic triene metathesis (ATMET) of a triglyceride by the application of methyl acrylate as a chain stopper for this straightforward one step one pot polymerization. The resulting branched materials were characterized by GPC, NMR as well as ESI‐MS and the combination of these techniques provided valuable insights into the polymer structure as well as occurring side reactions during this olefin metathesis polymerization reaction.
Investigations on the self‐assembly of block copolymers in solution have in some way a less well‐studied history than the study of their phase separation in the solid state, and many aspects are yet not completely understood. Here we focus on the behavior of a specific class of copolymers, namely semicrystalline block copolymers, capable of forming cylindrical aggregates in a solvent selective for the non‐crystalline, complementary block. A common model of micellization is proposed, in principle applicable to most of these copolymeric systems.
Summary: We show that small quantities of dibenzylidene sorbitol dispersed in poly(ε‐caprolactone) provide a self‐assembling nanoscale framework to yield high levels of crystal orientation. During modest shear flow of the melt, the additive forms highly extended nanoparticles which adopt a preferred alignment with respect to the flow field and, on cooling, polymer crystallisation is directed by these particles. We speculate that atomistic level epitaxy is unlikely to be the only directing influence.
SAXS pattern of PCL/DBS in the melt at 80 °C and subjected to a shear flow of 10 s−1 for 1 000 shear units. The flow direction is vertical. 相似文献
Oligomeric guanidines can be obtained by polycondensation of guanidine hydrochloride and 1,2‐bis(2‐aminoethoxy)ethane. A comparative MALDI‐TOF mass spectrometry/NMR spectroscopy study with a 13C‐labeled sample enabled the unambiguous analysis of a guanidine‐based polymer. Among the four major product series unprecedented macrocyclic compounds were detected. The minimum inhibition concentrations for four different microorganisms were determined, showing excellent biocidal activities.
Interaction chromatography has been employed to validate that adsorption of poly[styrene‐co‐(4‐bromostyrene)] (PBrxS) random copolymers, where x denotes the mole fraction of 4‐bromostyrene (4–BrS) in PBrxS in solution depends on the average number of adsorptive segments, the type of adsorbing substrate, and on the co‐monomer sequence distribution in PBrxS.
Summary: A series of novel mesogen‐jacketed liquid crystal miktoarm star rod‐coil block copolymers were synthesized via atom transfer radical polymerization (ATRP). Their architectures {coil conformation of styrene segment and rigid rod conformation of {2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (MPCS) segment} were confirmed by GPC, 1H NMR, and MALDI‐TOF studies. The liquid crystalline behaviors of the synthesized copolymers are evidenced from POM observation. The liquid crystalline phase depends on the molecular weights of the rigid rod arm of miktoarm star copolymers.
The Ti complexes containing tridentate [O−NSR] (R = Me, iPr) ligands with alkylthio sidearms were prepared. The methylthio ether complex (R = Me shown in the Scheme) exhibits an excellent activity for copolymerization of ethylene with norbornene upon activation with MMAO, which is 10 times more active than the corresponding phenylthio one (R = Ph).
