New multifunctional copoly(2‐oxazoline) nanoparticles were prepared for cell studies. The polymer contains double‐bond side chains as potential reaction sites for “thio”‐click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200–800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.
A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).
Polyaniline nanostructures (nanosheets, nanofibers, and nanoparticles) can be assembled at the organic/aqueous interface or in solution by controlling the diffusion rate and the polymerization induction time of aniline. The quality of polyaniline nanostructures is determined by the polymerization solution conditions. Polyaniline nanosheets formation mechanism was proposed. Under certain polymerization conditions, polyaniline nanofibers or/and nanoparticles were obtained.
Summary: A novel type of glycerol‐derived, water‐soluble polycarbonate with pendant, primary hydroxyl groups was prepared from 2‐(2‐benzyloxyethoxy)trimethylene carbonate (BETC). Ring‐opening polymerization of BETC and 2,2‐dimethyltrimethylene carbonate (DTC) gave narrow distribution of homopolymers or random copolymers with high molecular weights. The protecting benzyl groups were removed by catalyzed hydrogenation at atmosphere H2 pressure to give hydroxyl polycarbonates without observable changes on the polymer backbone and molecular weight distribution. The hydrophilicity of the copolymers increases with the increase in the hydrophilic glycerol‐derived carbonate content.
Synthesis of the glycerol‐derived polycarbonate. 相似文献
The hemoprotein horseradish peroxidase (HRP) catalyzes the polymerization of N‐isopropylacrylamide with an alkyl bromide initiator under conditions of activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) in the absence of any peroxide. This is a novel activity of HRP, which we propose to name ATRPase activity. Bromine‐terminated polymers with polydispersity indices (PDIs) as low as 1.44 are obtained. The polymerization follows first order kinetics, but the evolution of molecular weight and the PDI upon increasing conversion deviate from the results expected for an ATRP mechanism. Conversion, and PDI depend on the pH and on the concentration of the reducing agent, sodium ascorbate. HRP is stable during the polymerization and does not unfold or form conjugates.
The synthesis of cationic mono‐(6‐O‐(1‐vinylimidazolium))‐ß‐cyclodextrin with toluenesulfonate as the corresponding anion is described. Free‐radical copolymerization of the resulting host–guest complex with N‐isopropylacrylamide or N,N‐diethylacrylamide yielded copolymers showing a temperature‐controlled solubility window in water. The impact of different anionic guests and salt concentrations on solubility behavior was investigated via turbidity measurements.
Poly(2,5‐thienylene vinylene) (PTV), an insoluble conjugated polymer, can be readily prepared in various shapes of different nanodimensions by the chemical vapor deposition polymerization of 2,5‐bis(chloromethyl)thiophene. The bischloromethyl monomer in the vapor phase is activated at 600 °C. The activated monomer vapor is deposited at room temperature on the surface of various substrates to prepare polymeric films, fibers, tubes etc., which are then thermally converted into PTV. PTV thin films can be carbonized thermally to produce graphitic compositions that contain sulfur atoms. Electrical conductivities of FeCl‐doped PTV and carbonized films are reported.
Tough networks are prepared by photo‐crosslinking high‐molecular‐weight DLLA and TMC macromers. These amorphous networks exhibit tunable thermal and mechanical properties and have excellent shape‐memory features. Variation of the monomer ratio allows adjustment of Tg between approximately ?13 and +51 °C. The elastic moduli at room temperature can be varied between 4.5 and 2730 MPa. The crosslinks allow the networks to return to their original shape after deformation. 60:40 DLLA:TMC networks have Tg values between room temperature and body temperature, with mechanical properties at body temperature close to soft tissues. Several medical devices are prepared from these networks.
Summary: Microwave‐assisted ring‐opening polymerization of ε‐caprolactone in the presence of 1‐butyl‐3‐methylimidazolium tetrafluoroborate ionic liquid using zinc oxide as a catalyst is investigated. By adding 30 wt.‐% ionic liquid, poly(ε‐caprolactone) with a weight‐average molar mass of 28 500 g · mol−1 is obtained at 85 W for 30 min. The results indicate that the polymerization could be efficiently enhanced in the presence of ionic liquids under microwave irradiation because ionic liquids can effectively absorb microwave energy.
Multilayers containing a perylene diimide labelled star polymers (FSP) donor adjacent to phosphorus dendrimer layer on a silver substrate were constructed by layer by layer (LBL) approach. Using Surface Plasmon Enhanced Fluorescence Spectroscopy (SPFS) technique, a time‐resolved ultrasensitive and selective detection of DNA targets relying on enhanced optical fields associated with energy transfer (ET) were achieved under the excitation at 543 nm. The detection limit is about 8 orders of magnitude better than the achieved one under the excitation at 632 nm, which is ascribed to no energy transfer from the donor to the acceptor under the excitation at 632 nm, resulting in much weak detection signal in turn.
Summary: A series of high clay content Laponite XLS/polyacrylamide (PAAm) nanocomposite hydrogels (S‐M gels) with excellent resilience, low elastic hysteresis, and ultrahigh elongation, have been successfully synthesized. Based on our results, it is concluded that the mechanical properties of nanocomposite hydrogels probably depend to a great extent on the hydrophilicity and flexibility of the macromolecules. Moreover, it is found that the transparency during the in‐situ polymerization of S‐M gels does not change, which is quite different from clay/poly(N‐isopropylacrylamide) nanocomposite hydrogels.
Formation of nanocomposite hydrogels using Clay‐S by in‐situ polymerization. 相似文献
Summary: Crosslinkable composite microspheres were prepared by heterocoagulation of epoxy resin nanoparticles onto polystyrene microspheres. The corresponding hollow microspheres were created after removal of the core. The surface morphology was tunable from smooth to rough by controlling the degree of crosslinking of the shell nanoparticles. A positively charged polyelectrolyte could be easily adsorbed onto the composite microspheres to facilitate further synthesis, e.g., layer‐by‐layer deposition and a sol‐gel process to form inorganic materials.
An SEM image of the PS/EP/silica (where the EP was crosslinked slowly) microspheres after the cores have been removed. 相似文献
An atomic force microscope in the compression mode was used to probe the nanomechanical response of single dendrimeric molecules, as well as dendrimer aggregates adsorbed on silicon surface. The force‐compression behaviour of individual, generation 5 poly(amido amine) (PAMAM) dendrimers was described by a Hertzian model for the deformation of elastic bodies. The modulus values obtained ranged between 700 MPa (single dendrimers) and 150 MPa (dendrimer aggregates).
