Novel Fibers Prepared from Cellulose in NaOH/Urea Aqueous Solution

Summary: Novel regenerated cellulose fibers have been successfully spun from the cellulose dope in NaOH/urea aqueous solution, which could rapidly dissolve cellulose. The fibers possess circular cross‐sections as well as relatively high molecular weight, and a crystallinity index with cellulose II family crystal structure, leading to good mechanical properties. This technology is simple, cheap, and environmentally friendly, promising to substitute for viscose rayon production having hazardous byproducts.

SEM micrograph of the cross‐section of the novel cellulose fibers generated here.     

Dissolution and regeneration of cellulose in NaOH/thiourea aqueous solution

A novel cellulose solvent, 1.5 M NaOH/0.65 M thiourea aqueous solution, was used to dissolve cotton linters having a molecular weight of 10.1 × 10⁴ to prepare cellulose solution. Regenerated cellulose (RC) films were obtained from the cellulose solution by coagulating with sulfuric acid (H₂SO₄) aqueous solution with a concentration from 2 to 30 wt %. Solubility of cellulose, structure, and mechanical properties of the RC films were examined by infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, ¹³C NMR, and tensile tests. ¹³C NMR analysis indicated that the novel solvent of cellulose is a nonderivative aqueous solution system. The presence of thiourea enhanced significantly the solubility of cellulose in NaOH aqueous solution and reduced the formation of cellulose gel; as a result, thiourea prevented the association between cellulose molecules, leading to the solvation of cellulose. The RC film obtained by coagulating with 5 wt % H₂SO₄ aqueous solution for 5 min exhibited higher mechanical properties than that with other H₂SO₄ concentrations and a homogenous porous structure with a mean pore size of 186 nm for free surface in the wet state. The RC film plasticized with 10% glycerin for 5 min had a tensile strength of 107 MPa and breaking elongation of 10%, and about 1% glycerin in the RC film plays an important role in the enhancement of the mechanical properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1521–1529, 2002     

Structure and properties of novel fibers spun from cellulose in NaOH/thiourea aqueous solution

Cellulose was dissolved rapidly in a NaOH/thiourea aqueous solution (9.5:4.5 in wt.-%) to prepare a transparent cellulose solution, which was employed, for the first time, to spin a new class of regenerated cellulose fibers by wet spinning. The structure and mechanical properties of the resulting cellulose fibers were characterized, and compared with those of commercially available viscose rayon, cuprammonium rayon and Lyocell fibers. The results from wide angle X-ray diffraction and CP/MAS 13C NMR indicated that the novel cellulose fibers have a structure typical for a family II cellulose and possessed relatively high degrees of crystallinity. Scanning electron microscopy (SEM) and optical microscopy images revealed that the cross-section of the fibers is circular, similar to natural silk. The new fibers have higher molecular weights and better mechanical properties than those of viscose rayon. This low-cost technology is simple, different from the polluting viscose process. The dissolution and regeneration of the cellulose in the NaOH/thiourea aqueous solutions were a physical process and a sol-gel transition rather than a chemical reaction, leading to the smoothness and luster of the fibers. This work provides a potential application in the field of functional fiber manufacturing.     

Hydrogels prepared from unsubstituted cellulose in NaOH/urea aqueous solution

Novel cellulose hydrogels were synthesized through a "one-step" method from cellulose, which was dissolved directly in NaOH/urea aqueous solution, by using epichlorohydrin as crosslinker. Structure and properties of the hydrogels were characterized by using SEM, NMR, and water absorption testing. The hydrogels are fully transparent and display macroporous inner structure. The equilibrium swelling ratios of the hydrogels in distilled water at 25 degrees C are in the range from 30 to 60 g H(2)O/g dry hydrogel. Moreover, the reswelling water uptake of the hydrogels could be achieved to more than 70% compared with their initial swelling states. This work provided a simple and fast method for preparing eco-friendly hydrogels from unsubstituted cellulose.     

Influence of finishing oil on structure and properties of multi-filament fibers from cellulose dope in NaOH/urea aqueous solution

Cellulose multi-filament fibers have been spun successfully on a pilot plant scale, from a cellulose dope in 7 wt% NaOH/12 wt% urea aqueous solution pre-cooled to −12 °C. Coagulation was accomplished in a bath with 10 wt% H₂SO₄/12 wt% Na₂SO₄ and then 5 wt% H₂SO₄ aqueous solution. By using different finishing oil, including H₂O, 4% glycerol aqueous solution, 2% polyvinyl alcohol (PVA) aqueous solution, 2% polyethylene glycol octyl phenylether (OP) aqueous solution, mobol and 2%glycerol/1%PVA/1%OP aqueous solution (PGO), we prepared six kinds of the cellulose multi-filaments, with tensile strength of 1.7–2.1 cN/dtex. Their structure and properties were investigated with scanning electron microscope (SEM), ¹³C NMR solid state, wide-angle X-ray diffraction (WAXD) and tensile testing. The cellulose fibers treated with PGO possessed higher mechanical properties and better surface structure than others. Interestingly, although the orientation of the cellulose multi-filaments is relatively low, the tensile strength of the single-fiber was similar to that of Lyocell. It was worth noting that the dyeability of the multi-filament fibers was superior to viscose rayon.     

Cold NaOH/urea aqueous dissolved cellulose for benzylation: Synthesis and characterization

Cold NaOH/urea aqueous dissolved cellulose was studied for the synthesis of benzyl cellulose by etherification with benzyl chloride. By varying the molar ratios of benzyl chloride to OH groups in cellulose (1.5–4.0) and reaction temperatures (65–70 °C), benzyl cellulose with a degree of substitutions (DS) in the range of 0.29–0.54 was successfully prepared under such mild conditions. The incorporation of benzyl groups into cellulose was evidenced by multiple spectroscopies, including FT IR, ¹H NMR, ¹³C NMR, CP/MAS ¹³C NMR and XRD. In addition, the thermal stability and surface morphology of the benzyl cellulose was also investigated with regard to the degree of substitution. The results indicated that the benzyl cellulose product with a low DS (0.51) in the present study reached the same solubility in many organic solvents as compared to those prepared in heterogeneous media. After benzylation, the sample decomposed at a lower temperature with a wider temperature range, which indicated that the thermal stability of benzyl cellulose was lower than that of the native cellulose. In addition, benzylation resulted in a pronounced reduction in crystallinity as well as a fundamental alteration of morphology of the native cellulose.     

Structure and properties of blend membranes prepared from cellulose and alginate in NaOH/urea aqueous solution

Regenerated cellulose (RC)/alginic acid (AL) blend membranes were satisfactorily prepared from 6 wt % NaOH/4 wt % urea aqueous solution by coagulating with 5 wt % CaCl₂ aqueous solution, and then treated with 3 wt % HCl. Morphology, crystallinity, mechanical properties, and thermal stability of the membranes were investigated by scanning electron microscopy (SEM), IR and UV spectroscopes, X‐ray diffraction, tensile tests, and thermogravimetric analysis (TGA). The RC/AL blends were miscible in all weight ratios of cellulose to alginate. The membranes have homogeneous mesh structures, and the mesh sizes of the blend membranes (200–2000 nm) significantly increased with increasing alginate content. The crystalline state of the AL membrane prepared from 6 wt % NaOH/4 wt % urea aqueous solution was broken completely, and the crystallinity of the blend membranes decreased with an increase of AL. Comparing with AL membranes, the tensile strength and breaking elongation of the blend membranes were obviously improved in dry and wet states. Therefore, the RC/AL blends offer a promising way of alginate as separate and functional materials used in the wet state. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 451–458, 2001     

A convenient method for the synthesis of 2-amino substituted aza-heterocycles from N,N′-disubstituted thioureas using TsCl/NaOH

p-Toluenesulfonyl chloride (TsCl)/NaOH has been introduced as reagent combination for the synthesis of 2-amino-oxa- or 2-amino-thiazolidines from N-(2-hydroxyethyl)-thioureas, but its general application in heterocycle synthesis has not been investigated. In this paper the convenient and efficient synthesis of a variety of 2-amino-substituted 1-aza 3-(aza, oxo or thio) heterocycles of different substitution and ring sizes is described. The application of polymer-supported TsCl facilitates work-up and renders the reaction conditions very suitable for parallel or robot synthesis.     

Paclitaxel‐Loaded Polylactide/Polyethylene Glycol Fibers with Long‐Term Antitumor Activity as a Potential Drug Carrier for Local Chemotherapy

Local application of anticancer agents prolongs the presence time and increases the concentration of drug in the target place and therefore may reduce serious side effects compared to drug systemic administration. The preparation of fibrous materials of polylactide (PLA) and polyethylene glycol (PEG) loaded with paclitaxel (PTX, 1 or 10 wt%) is presented. Scanning electron microscopy proves that PTX is homogeneously incorporated into the fibers. The addition of PEG of various molecular weights (6, 20, or 35 kDa) ensures the release of significantly higher amounts of hydrophobic PTX in a prolonged release time compared to the fibers containing PTX only. Present PLA‐PEG fibrous carriers can serve as a drug depot for PTX since they exhibit significant toxicity for cancer cell lines in several‐day experiment. They are promising for local recurrence therapy, where the initial release is efficient to kill tumor cells and continued release can prevent their subsequent proliferation.     

A green and efficient method for synthesis of benzimidazoles using nano‐Fe3O4 in PEG‐400/H2O aqueous system under ambient conditions at room temperature

In this paper, a green and facile protocol was described which was efficient for synthesis of benzimidazoles using nano‐Fe₃O₄ catalyst with continuous bubbling of air as the oxidant in PEG‐400/H₂O aqueous system at room temperature. This protocol afforded the target products in good to excellent yields and the catalytic system could be recycled and reused without significant loss of catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Expression,Purification and Characterization of a Bifunctional α‐L‐Arabinofuranosidase/β‐D‐Xylosidase from Trichoderma Koningii G‐39

A gene of α‐L ‐arabinofuranosidase (Abf) from Trichoderma koningii G‐39 was successfully expressed in Pichia pastoris. The recombinant enzyme was purified to > 90% homogeneity by a cation‐exchanged chromatography. The purified enzyme exhibits both α‐L ‐arabinofuranosidase and β‐D ‐xylosidase (Xyl) activities with p‐nitrophenyl‐α‐L ‐arabionfuranoside (pNPAF) and 2,4‐dinitrophenyl‐β‐D ‐xylopyanoside (2,4‐DNPX) as substrate, respectively. The stability and the catalytic feature of the bifunctional enzyme were characterized. The enzyme was stable for at least 2 h at pH values between 2 and 8.3 at room temperature when assayed for Abf and Xyl activities. Enzyme activity decreased dramatically when the pH exceeded 9.5 or dropped below 1.5. The enzyme lost 35% of Abf activity after incubation at 55 °C for 2 h, but retained 95% of Xyl activity, with 2,4‐DNXP as substrate, under the same conditions. Further investigation of the active site topology of both enzymatic functions was performed with the inhibition study of enzyme activities. The results revealed that methyl‐α‐L ‐arabinofuranoside inhibition is noncompetitive towards 2,4‐DNPX as substrate but competitive towards pNPAF. Based on the thermal stability and the inhibition studies, we suggest that the enzymatic reactions of Abf and Xyl are performed at distinct catalytic sites. The recombinant enzyme possesses both the retaining transarabinofuranosyl and transxylopyranosyl activities, indicating both enzymatic reactions proceed through a two‐step, double displacement mechanism.     

MgCl2/Et3N Base System as a New Catalyst for the Synthesis of α‐Hydroxyphosphonate

An efficient and simple synthesis of α‐hydroxyphosphonates via reaction of aldehydes and ketones with dimethylphosphite in the presence of MgCl₂/Et₃N base system is reported. The use of readily available and easy to handle reagent MgCl₂/Et₃N makes this method simple, convenient, and practical.     

Cu(OAc)2·H2O/NH2OH·HCl/CH3COONa: A Facile and Efficient Catalyst System for Copper‐catalyzed Azide–Alkyne Click Reactions in Water

A facile and efficient protocol has been developed for synthesis of 1,4‐disubstituted 1,2,3‐triazoles in good to excellent yields using Cu(OAc)₂·H₂O (0.5 mol%)/NH₂OH·HCl (0.5 mol%)/CH₃COONa (1.0 mol%) as the catalyst system. The presence of CH₃COONa (2 equiv) could ensure the in situ generation of Cu₂O as the active catalyst instead of CuCl from Cu(OAc)₂·H₂O (1 equiv)/NH₂OH·HCl (1 equiv). This protocol could be carried out in water under mild conditions.     

A rapid and sensitive LC–MS/MS method for quantification of quercetin‐3‐O‐β‐d‐glucopyranosyl‐7‐O‐β‐d‐gentiobioside in plasma and its application to a pharmacokinetic study

A rapid and sensitive LC–MS/MS method with good accuracy and precision was developed and validated for the pharmacokinetic study of quercetin‐3‐O‐β‐d ‐glucopyranosyl‐7‐O‐β‐d ‐gentiobioside (QGG) in Sprague–Dawley rats. Plasma samples were simply precipitated by methanol and then analyzed by LC–MS/MS. A Venusil® ASB C₁₈ column (2.1 × 50 mm, i.d. 5 μm) was used for separation, with methanol–water (50:50, v/v) as the mobile phase at a flow rate of 300 μL/min. The optimized mass transition ion‐pairs (m/z) for quantitation were 787.3/301.3 for QGG, and 725.3/293.3 for internal standard. The linear range was 7.32–1830 ng/mL with an average correlation coefficient of 0.9992, and the limit of quantification was 7.32 ng/mL. The intra‐ and inter‐day precision and accuracy were less than ±15%. At low, medium and high quality control concentrations, the recovery and matrix effect of the analyte and IS were in the range of 89.06–92.43 and 88.58–97.62%, respectively. The method was applied for the pharmacokinetic study of QGG in Sprague–Dawley rats. Copyright © 2016 John Wiley & Sons, Ltd.     

A rapid and sensitive LC‐MS/MS method for the determination of Pulsatilla saponin D in rat plasma and its application in a rat pharmacokinetic and bioavailability study

A simple, sensitive and specific liquid chromatography–tandem mass spectrometry method was developed and validated for the determination of Pulsatilla saponin D, a potential antitumor constituent isolated from Pulsatilla chinensis in rat plasma. Rat plasma samples were pretreated by protein precipitation with methanol. The method validation was performed in accordance with US Food and Drug Administration guidelines and the results met the acceptance criteria. The method was successfully applied to assess the pharmacokinetics and oral bioavailability of Pulsatilla saponin D in rats. Copyright © 2014 John Wiley & Sons, Ltd.     

A rapid HPLC‐ESI‐MS/MS method for determination of β‐asarone,a potential anti‐epileptic agent,in plasma after oral administration of Acorus calamus extract to rats

β‐Asarone (BAS), a phenylpropanoid from Acorus calamus Linn., has shown biological effects in the management of cognitive impairment conditions such as Alzheimer's disease. The present paper describes a selective and sensitive liquid chromatography–tandem mass spectrometric method (HPLC‐MS/MS) using electrospray ionization source (ESI) for quantification of BAS in rat plasma. Briefly, the plasma samples were pre‐treated using a simple solid‐phase extraction method. The separation of BAS and the internal standard, caffeine, was achieved on an Agilent Zorbax XDB C₁₈ column (50 × 2.1 mm i.d., 5 µm) using 0.2 mL/min isocratic mobile phase flow. The detection was performed using an Applied Biosystems Hybrid Q‐Trap API 2000 mass spectrometer equipped with an ESI source operated in positive mode. Also, the developed bioanalytical method was validated as per the US FDA bioanalytical guidelines over the concentration range of 9.79–4892.50 ng/mL (r² ≥ 0.9951) for BAS from rat plasma. The mean percentage recovery (n = 3) for the low, middle and high quality control samples was 86.92 ± 3.89, 85.30 ± 1.09 and 87.24 ± 4.03%, respectively. The applicability of the validated HPLC‐MS/MS method was demonstrated by successful measurement of BAS from plasma following oral administration of Acorus calamus rhizome extracts to three female albino Wistar rats. Copyright © 2012 John Wiley & Sons, Ltd.     

A UPLC‐MS/MS method for simultaneous determination of five flavonoids from Stellera chamaejasme L. in rat plasma and its application to a pharmacokinetic study

Stellera chamaejasme L. has been used as a traditional Chinese medicine for the treatment of scabies, tinea, stubborn skin ulcers, chronic tracheitis, cancer and tuberculosis. A sensitive and selective ultra‐high liquid chromatography–tandem mass spectrometry (UPLC‐MS/MS) method was developed and validated for the simultaneous determination of five flavonoids (stelleranol, chamaechromone, neochamaejasmin A, chamaejasmine and isochamaejasmin) of S. chamaejasme L. in rat plasma. Chromatographic separation was accomplished on an Agilent Poroshell 120 EC‐C₁₈ column (2.1 × 100 mm, 2.7 μm) with gradient elution at a flow rate of 0.4 mL/min and the total analysis time was 7 min. The analytes were detected using multiple reaction monitoring in positive ionization mode. The samples were prepared by liquid–liquid extraction with ethyl acetate. The UPLC‐MS/MS method was validated for specificity, linearity, sensitivity, accuracy and precision, recovery, matrix effect and stability. The validated method exhibited good linearity (r ≥ 0.9956), and the lower limits of quantification ranged from 0.51 to 0.64 ng/mL for five flavonoids. The intra‐ and inter‐day precision were both <10.2%, and the accuracy ranged from −11.79 to 9.21%. This method was successfully applied to a pharmacokinetic study of five flavonoids in rats after oral administration of ethyl acetate extract of S. chamaejasme L.