Facile Synthesis and Polymerization of 2,6‐Difluoro‐2′‐sulfobenzophenone for Aromatic Proton Conducting Ionomers with Pendant Sulfobenzoyl Groups

The lithium salt of 2,6‐difluoro‐2′‐sulfobenzophenone was conveniently synthesized in one‐pot by reacting 2,6‐difluorophenyllithium with 2‐sulfobenzoic acid cyclic anhydride in THF at −70 °C whereafter the product crystallized out of solution. A poly(arylene ether) and a poly(arylene sulfide) were prepared by polycondensation reactions to demonstrate the reactivity and efficacy of this new monomer to produce sulfonated high‐molecular weight aromatic polymers for fuel cell proton‐exchange membranes. This work demonstrated that organolithium chemistry may offer versatile and straightforward pathways to new functional monomers with fluorine atoms activated for nucleophilic aromatic substitution reactions.

     

New Heteroaromatic Polymers Consisting of Alkyl‐ and Amino‐1,3,5‐triazine Units. Their Basic Optical Properties and n‐Type Time‐of‐Flight Drift Mobility

Summary: Alternating copolymers between substituted 1,3,5‐triazine (substituent = alkyl or amine) and thiophene or bithiophene are synthesized. The copolymer of amino‐1,3,5‐triazine with thiophene is soluble in organic solvents, transparent in most parts of the visible region, and photoluminescent. The copolymer receives electrochemical n‐doping with an E_pc of −2.08 V vs Ag⁺/Ag and shows a time‐of‐flight electron drift mobility of 2.0 × 10⁻⁴ cm² · V⁻¹ · s⁻¹, which is larger than that of widely used Al(8‐quinolinolato)₃.

Structure of the poly(1,3,5‐triazine)s.     

Titanium‐Catalyzed Norbornene Oligomerization. Isolation of a Crystalline Heptamer with a 2,3‐exo‐Disyndiotactic Structure

Summary: Norbornene (NB) was oligomerized at 0 °C using AlEt₂Cl‐TiCl₄ at a monomer/titanium molar ratio of about 11. The oligomerization product consists of a fraction soluble in diethyl ether, amorphous by X‐ray examination, and of a crystalline fraction, insoluble in diethyl ether. The crystalline fraction was shown by powder X‐ray diffraction to consist of a NB heptamer. Single‐crystal X‐ray analysis indicated that the heptamer had a stereoregular 2,3‐exo‐disyndiotactic structure. The heptamer adopts a strained, highly irregular, folded conformation in the crystalline state. Structural differences with respect to NB oligomers obtained with zirconocene catalysts are discussed.

A view of the molecular structure of the crystalline NB heptamer.     

Blue‐Light‐Emitting Conjugated Polymers Derived From 2,7‐Carbazoles

Blue‐light‐emitting 2,7‐carbazole‐based conjugated copolymers have been prepared by Yamamoto or Suzuki cross‐coupling reactions. By introducing highly substituted aromatic comonomers, fully soluble high‐molecular‐weight copolymers have been obtained. Moreover, these amorphous polymeric materials exhibit good thermal stability and interesting redox properties. All these features make these new conjugated polymers highly promising for the development of single‐polymer‐layer blue‐light‐emitting diodes.

     

Synthesis of High Solid‐Content Latex using Alkali‐Soluble Resin as Sole Surfactant

Summary: A novel polymerization procedure to synthesize latex stabilized by alkali‐soluble resin (ASR) is detailed. According to this process, latexes with a high solid content and low viscosity are obtained using a substantially lower amount of ASR when compared with existing techniques. Similar rewet properties were found for the latexes obtained by a standard process and for the one obtained by the process described in this work.

Comparison of the particle size distributions obtained by conventional emulsion polymerization (○) and by miniemulsion polymerization (□).     

Viscoelastic Behavior and Force Nature of Thermo‐Reversible Epoxy Dry Adhesives

The gecko adhesion phenomenon has stimulated efforts to produce synthetic patterned dry adhesives. Besides introducing surface patterns on dry adhesives, it is also highly desirable to understand their intrinsic material properties. This communication reports the viscoelastic behavior of non‐patterned epoxy elastomers exhibiting intrinsic adhesion that is much higher than that of elastomers typically used for structure patterning. The diverse molecular origin of the adhesion is revealed through the study of adhesion against various substrates.

     

Electrical Conductivity of an Individual Polyaniline Nanotube Synthesized by a Self‐Assembly Method

Camphor sulfonic acid (CSA) doped polyaniline (PANI) nanotubes (175 nm in outer diameter and 120 nm in inner diameter) were synthesized successfully by a self‐assembly method. It is found that the room‐temperature conductivity of an individual PANI nanotube is 30.5 S · cm⁻¹; in particular, the intrinsic resistance of an individual nanotube (30 kΩ) is much smaller than the contact resistance of crossed nanotubes (500 kΩ).

A SEM image of two crossed PANI‐CSA nanotubes and the attached Pt electrodes.     

Plasma‐Initiated Controlled/Living Radical Polymerization of Methyl Methacrylate in the Presence of 2‐Cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN)

Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.

Dependence of ln([M]₀/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C.     

Multifunctional Poly(2‐oxazoline) Nanoparticles for Biological Applications

New multifunctional copoly(2‐oxazoline) nanoparticles were prepared for cell studies. The polymer contains double‐bond side chains as potential reaction sites for “thio”‐click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200–800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.

     

Water‐Soluble Electrostatic Complexes of C60‐Anchored Anionic Polymers and Cationic Porphyrins

The preparation of novel highly water‐soluble electrostatic complexes from C₆₀‐anchored multi‐armed poly(acrylic acid)s and cationic porphyrin derivatives was demonstrated. The UV‐vis absorption and photoluminescence (PL) of these complexes show that the absorption of soret band exhibits a remarkable red shift and the emission of the Q band indicates an apparent quenching effect in comparison with that of the parent cationic porphyrin. These results imply a remarkable ground state and excited state interaction between the porphyrin ring and the C₆₀ moiety.

     

Metallo‐Polymerization/‐Cyclization of a C16‐Bridged Di‐Terpyridine Ligand and Iron(II) Ions

Summary: The coordinative polymerization/cyclization of a flexible monodisperse di‐terpyridine ligand with iron(II ) chloride is reported. Matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) investigations showed the preferred formation of a [2 + 2] macrocycle, but also larger aggregates (cycles or linear oligomers) with up to 10 monomer units were found. Because of its C₁₆‐spacer, the solubility is sufficient for performing viscosity experiments in CHCl₃/MeOH solution. A viscosity titration revealed a maximum in viscosity at the 1‐to‐1 ratio of iron(II ) ions to di‐terpyridine‐ligands, which indicates the formation of extended oligomers, polymers, catenanes and/or cycles at that ratio.

Schematic representation of intra‐ and intermolecular metallo‐macrocycles.     

Poly(cyclic imino ether)s Beyond 2‐Substituted‐2‐oxazolines

2‐Oxazolines (2‐OZO) are 5‐membered cyclic imino ethers whose cationic ring‐opening polymerization (CROP) mechanism and resulting polymer properties are extensively studied. However, also 6‐ and 7‐membered cyclic imino ethers can be polymerized via CROP. Together with the much less studied 4‐ and 5‐substituted main‐chain chiral poly(2‐oxazoline)s (P‐2‐OZO), these compounds are interesting monomers to enhance the versatility of (co)poly(cyclic imino ether)s. To emphasize the potential of such alternative cyclic imino ether monomers, we provide an overview on the polymerizations of 2‐oxazine (2‐OZI) and chiral 4‐ and 5‐substituted 2‐OZO as well as of selected properties of the resulting polymers. In addition, the hydrolysis of these polymers into the corresponding poly(alkylene imine)s will be addressed.

     

Single‐Mode Microwave Ovens as New Reaction Devices: Accelerating the Living Polymerization of 2‐Ethyl‐2‐Oxazoline

Summary: The ring‐opening cationic polymerization of 2‐ethyl‐2‐oxazoline was performed in a single‐mode microwave reactor as the first example of a microwave‐assisted living polymerization. The observed increase in reaction rates by a factor of 350 (6 h → 1 min) in the range from 80 to 190 °C could be attributed solely to a temperature effect as was clearly shown by control experiments and the determined activation energy. Because of the homogenous microwave irradiation, the polymerization could be performed in bulk or with drastically reduced solvent ratios (green chemistry).

Monomer conversion, represented by the ratio ln{[M₀]/[M_t]}, plotted against time for six temperatures in the range from 80 to 180 °C, and polymerization reaction vials, showing an increase in yellow color for those reactions performed (well) above and below 140 °C, indicating side reactions.     

Multiphase‐Separated Polyurethanes Studied by Micro‐Raman Spectroscopy

Micro‐Raman spectroscopy has been used to investigate the chemical micro‐heterogeneity of multiphase‐separated poly(ether urethanes) (PETU). Analysis of PETU cross‐sections by means of micro‐Raman spectroscopy revealed the nearly complete absence of soft segments in AI aggregates (called globules). These aggregates are in the order of a few micrometers in size. The composition of the matrix and the AII aggregates (spherulites) was comparable.

Example of an AFM image (sample 706, scan size 25 μm, converted to monochromatic image).     

Photochemical Generation of Ferrocene‐Based Redox‐Polymer Networks

A photochemical approach toward the generation of enzyme‐containing redox polymer networks, which are the key material in enzymatic sensors and biofuel cells, is described. The approach is based on the incorporation of photo‐reactive benzophenone groups into the redox polymers. The obtained polymers are then deposited on the surface of glassy carbon electrodes and cross‐linked by illumination with UV light at 365 nm. If this step is done in the presence of the enzyme glucose oxidase, functional electrodes are obtained that yield electrical power upon addition of glucose. This work specifically addresses the question of electrode stability in buffer and demonstrates how slight variations in the chemistry of the redox polymer have a dramatic effect on the electrochemical performance of the electrodes. Different ferrocene‐containing redox polymer networks are synthesized and their properties in physiological buffer are studied.