Controlled Alternating Copolymerization of (Meth)acrylates and Vinyl Ethers by Using Organoheteroatom‐Mediated Living Radical Polymerization

Alternating copolymers comprised of (meth)acrylates and vinyl ethers with controlled molecular weights and polydispersities were synthesized for the first time by living radical polymerization using organotellurium, stibine, and bismuthine chain transfer agents. Combining living alternating copolymerization and living radical or living cationic polymerization afforded hitherto unavailable block copolymers with controlled macromolecular structures.

     

An All‐ROMP Route to Graft Copolymers

A new versatile synthesis strategy for macromonomers has been developed that uses the living ring‐opening metathesis polymerization (ROMP) with commercial Grubbs first generation ruthenium initiators. Homopolymers as well as diblock copolymers were end‐functionalized with norbornene derivatives to serve as macromonomers. The graft copolymerization of the macromonomers was also carried out employing ROMP. Well‐defined and highly functional graft copolymers are accessible by this new synthetic route.

     

Novel One‐Step Route for Preparing Amphiphilic Block Copolymers of Styrene and N‐Isopropylacrylamide in a Microemulsion

Summary: Copolymerizations of St and NIPAM have been carried out through interfacial‐initiated microemulsion polymerization in a frozen state. FT‐IR and NMR spectroscopies confirm the occurrence of copolymerization between the two monomers. DSC analysis shows the existence of two glass transition temperatures of the resultant copolymers. The micellization of the copolymers is investigated by DLS and the temperature‐responsive behavior of the resultant micelles is observed. DSC and DLS results reveal the block feature of the obtained copolymers. Thus amphiphilic poly(styrene‐block‐N‐isopropylacrylamide) is prepared by a one‐step interfacial‐initiated microemulsion polymerization.

Hydrodynamic radius of the micellar particles formed by (left), and a typical DSC trace of (right), the poly(styrene‐block‐N‐isopropylacrylamide) prepared here.     

Self‐Assembly of Diblock Copolymers into Novel Snowflake‐Shaped Aggregates Driven by Quadruple Hydrogen Bonding

Two well‐defined diblock copolymers with quadruple hydrogen‐bonding groups on one block, denoted PSUEA‐1 and PSUEA‐2 , have been synthesized, and novel snowflake‐shaped nanometer‐scale aggregates, self‐assembled by such diblock copolymers in non‐polar solvents, have been observed. The micellar dimensions were investigated by DLLS and SLLS. Their morphologies were studied by TEM. Since the degrees of polymerization of the Upy‐containing blocks of PSUEA‐1 and PSUEA‐2 are quite similar and the polystyrene block of the PSUEA‐1 is longer than that of the PSUEA‐2 , a subtle but identifiable difference between the sizes and structures of the PSUEA‐1 and PSUEA‐2 aggregates was noticed and characterized.

     

Diversified Applications of Chemically Modified 1,2‐Polybutadiene

Commercially available 1,2‐PB was transformed into a well‐defined reactive intermediate by quantitative bromination. The brominated polymer was used as a polyfunctional macroinitiator for the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline to yield a water‐soluble brush polymer. Nucleophilic substitution of bromide by 1‐methyl imidazole resulted in the formation of polyelectrolyte copolymers consisting of mixed units of imidazolium, bromo, and double bond. These copolymers, which were soluble in water without forming aggregates, were used as stabilizers in the heterophase polymerization of styrene and were also studied for their ionic conducting properties.

     

All‐Conjugated,Rod‐Rod Block Copolymers‐Generation and Self‐Assembly Properties

Based on their rigid‐rod structure all‐conjugated, rod‐rod block copolymers show a preferred tendency to self‐assemble into low‐curvature vesicular or lamellar nanostructures independent from their specific chemical structure and composition. This unique and attractive behaviour is clearly illustrated in a few examples of such all‐conjugated block copolymers. The resulting nanostructured heteromaterials may find applications in electronic devices or artificial membranes.

     

Novel Cross‐Linked Films Prepared from Hyperbranched Poly(amine‐ester)

Summary: Novel hyperbranched poly(amine‐ester) (HPAE) cross‐linked films were prepared by cross‐linking the terminal hydroxyl groups of HPAE using glutaraldehyde (GA). Atom force microscope and scanning electron microscope revealed their smooth surfaces, dense and homogenous matrices. Property characterizations indicated that these cross‐linked films had good hydrophilicity, relative low protein adsorption, and high tensile strength. Also, their swelling behavior varied with the solvent.

Structure of the hyperbranched poly(amine‐ester).     

Green Nanocomposites from Renewable Resources: Biodegradable Plant Oil‐Silica Hybrid Coatings

Green nanocomposite coatings based on renewable plant oils have been developed. An acid‐catalyzed curing of epoxidized plant oils with 3‐glycidoxypropyltrimethoxysilane produced transparent nanocomposites. The hardness and mechanical strength improved by incorporating the silica network into the organic polymer matrix, and good flexibility was observed in the nanocomposite. The nanocomposites showed high biodegradability.

     

Design and Control of Copolymer Composition Distribution in Living Radical Polymerization Using Semi‐Batch Feeding Policies: A Model Simulation

Summary: Although controlled/living radical copolymerization has been extensively studied, the control of copolymer composition distribution receives little attention. In this paper, taking RAFT copolymerization as an example, we develop a mathematical model and simulate copolymerization systems with various reactivity ratios. It is demonstrated that through semi‐batch operations with programmed profiles of slow monomer feeding rate, precise control over copolymer composition distribution (uniform and designed gradient distributions) along polymer chain can be achieved. It is also found that the semi‐batch operations have lower rates of polymerization than their batch counterparts. The reason for this difference is analyzed, and the magnitude depends on the reactivity ratios and targeted copolymer composition. The improvement of the semi‐batch rate by distributing a part of the initiator amount to the monomer feeding tank is found to be minor.

Model‐based design and control over composition distribution of gradient copolymers implemented by semi‐batch operations.     

Chitinase‐Catalyzed Synthesis of a Chitin‐Xylan Hybrid Polymer: A Novel Water‐Soluble β(1 → 4) Polysaccharide Having an N‐Acetylglucosamine‐Xylose Repeating Unit

Summary: A chitin‐xylan hybrid polysaccharide having β(1 → 4)‐linked alternating structure of N‐acetyl‐D ‐glucosamine and D ‐xylose was synthesized via chitinase‐catalyzed polymerization. An oxazoline derivative of D ‐xylosyl‐β(1 → 4)‐N‐acetyl‐D ‐glucosamine ( 1 ) was effectively polymerized by the catalysis of chitinase from Bacillus sp., giving rise to a water‐soluble chitin‐xylan hybrid polysaccharide ( 2 ) in good yields. Molecular weights ( ) of 2 reached 1 500, which corresponds to 8–10 saccharide units.

A chitin‐xylan hybrid polysaccharide ( 2 ) synthesized via chitinase‐catalyzed polymerization.     

Micelles Formed by Cylindrical Brush‐Coil Block Copolymers

Summary: Amphiphilic cylindrical brush‐coil block copolymers consisting of a polystyrene coil and a cylindrical brush block with poly(acrylic acid) side chains are prepared by ATRP of t‐butylacrylate from a block comacroinitiator. Upon acidolysis of the poly(t‐butylacrylate), water‐soluble polymers were obtained that were observed to form micelles consisting of 4–5 block copolymers on average in aqueous solution. The star‐like nature of such micelles was clearly visualized by scanning force microscopy.

Schematic of coil‐cylindrical brush block copolymer PS‐b‐(PⁱBEMA‐g‐PAA), its AFM image clearly showing the main chain and the PAA corona of the cylindrical brush block.     

Nano Grape Formation by isotactic‐Poly(methacrylic acid)‐block‐Poly(butyl acrylate)

A novel approach is employed to produce core–corona nanospheres, which introduces a stereoregular hydrophilic part to an amphiphilic block copolymer. The resultant morphology is reported using isotactic‐poly(methacrylic acid)‐block‐poly(butyl acrylate). Infrared spectroscopy revealed a supramolecular interaction, and X ray diffraction revealed the crystallization of the outer isotactic‐poly(methacrylic acid) part. The nanostructure, which looks like a nanosized ‘grape’, was formed when nanospheres and nanofibers coexisted simultaneously and partially fused.

     

Blue‐Light‐Emitting Conjugated Polymers Derived From 2,7‐Carbazoles

Blue‐light‐emitting 2,7‐carbazole‐based conjugated copolymers have been prepared by Yamamoto or Suzuki cross‐coupling reactions. By introducing highly substituted aromatic comonomers, fully soluble high‐molecular‐weight copolymers have been obtained. Moreover, these amorphous polymeric materials exhibit good thermal stability and interesting redox properties. All these features make these new conjugated polymers highly promising for the development of single‐polymer‐layer blue‐light‐emitting diodes.

     

Ethylene and Ethylene/Propylene Polymerization Behavior of Bis(phenoxy‐imine) Zr and Hf Complexes with Perfluorophenyl Substituents

The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.

Structures of complexes 1 – 4 .     

Preparation of Magnetite Nanoparticles Coated with an Amphiphilic Block Copolymer: A Potential Drug Carrier with a Core‐Shell‐Corona Structure for Hydrophobic Drug Delivery

Summary: The synthesis of magnetic magnetite nanoparticles coated with amphiphilic block copolymers of poly(ethyl methacrylate)‐block‐poly(2‐hydroxyethyl methacrylate) for use as new potential carriers for hydrophobic drug delivery is reported. The results show that a new core‐shell‐corona structural material is obtained with a very narrow molecular weight distribution of the hydrophobic segment (PDI = 1.10). UV‐Vis results show that 37% of progesterone is released from the nanoparticles after 22 h, much slower than free release (99% after 14 h), which demonstrates that the presence of the hydrophobic segment can effectively control the release of hydrophobic drugs.

Synthesis of an amphiphilic block polymer poly(ethyl methacrylate)‐block‐poly(2‐hydroxyethyl methacrylate) on magnetite nanoparticles and their use as potential drug carriers     

Patterned Hydrophilization of Nanoporous 1,2‐PB by Thiol‐ene Photochemistry

We present an efficient method for functionalizing the large polymer–air interface of a gyroid nanoporous polymer. The hydrophilicity of nanoporous cross‐linked 1,2‐polybutadiene is tuned by thiol‐ene photo‐grafting of mercaptosuccinic acid or sodium 2‐mercaptoethanesulfonate. The reaction is monitored by FT‐IR, UV–Vis, contact angle, and gravimetry. Overall quantum yields are calculated for the two thiol‐ene “click” reactions in nano‐confinement, neatly revealing their chain‐like nature. Top–down photolithographic patterning is demonstrated, realizing hydrophilic nanoporous “corridors” exclusively hosting water. The presented approach can be relevant for many applications where, e.g., high control and contrast in hydrophilicity, chemical functionality or refractive index are needed.

     

Amphiphilic Poly(4‐acryloylmorpholine)/Poly[2‐(N‐carbazolyl)ethyl acrylate] Random and Block Copolymers Synthesized by NMP

A series of random copolymers and block copolymers containing water‐soluble 4AM and fluorescent VAK are synthesized by NMP. The homopolymerizations of 4AM and VAK and 4AM/VAK random copolymerization are performed in 50 wt% DMF using 10 mol% SG1, resulting in a linear increase in versus conversion, and final polymers with narrow molecular weight distributions ( < 1.4). Reactivity ratios r_VAK = 0.64 ± 0.52 and r_4AM = 0.86 ± 0.66 are obtained for the 4AM/VAK random copolymerization. In addition, a poly(4AM) macroinitiator is used to initiate a surfactant‐free suspension polymerization of VAK. After 2.5 h, the resulting amphiphilic block copolymer has = 12.6 kg · mol^?1, = 1.48, molar composition F_VAK = 0.38 with latex particle sizes between 270 and 475 nm.

     

Synthesis and Characterization of β‐Cyclodextrin Based Functional Monomers and its Copolymers with N‐isopropylacrylamide

Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.

Synthesis route of monovinyl β‐CD monomers.     

Metal‐Free Activation in the Anionic Ring‐Opening Polymerization of Cyclopropane Derivatives

The successful activation observed when using Bu^tP₄ phosphazene base and thiophenol or bisthiols for the anionic ring opening polymerization (ROP) of di‐n‐propyl cyclopropane‐1,1‐dicarboxylate is described. Well‐defined monofunctional or difunctional polymers with a very narrow molecular weight distribution were obtained through a living process. Quantitative end‐capping of the propagating malonate carbanion was accessible by using either an electrophilic reagent such as allyl bromide or a strong acid such as HCl. Kinetics studies demonstrated a much higher reactivity compared to the conventional route using alkali metal thiophenolates.

     

Highly Efficient Synthesis of Low Polydispersity Core Cross‐Linked Star Polymers by Ru‐Catalyzed Living Radical Polymerization

The efficient formation of low polydispersity core cross‐linked star (CCS) polymers via controlled/living radical polymerization (LRP) and the arm‐first approach was found to be dependant on the mediating catalyst system. The Ru catalyst, Ru(Ind)Cl(PPh₃)₂ Cat. 1 , and tertiary amine co‐catalyst were used to synthesize highly living poly(methyl methacrylate) (PMMA) macroinitiators, which were then linked together with ethylene glycol dimethacrylate (EGDMA) to form PMMA_armPEGDMA_core CCS polymers. The quantitative and near‐quantitative synthesis of CCS polymers were observed for low to moderate molecular weight macroinitiators ( = 8 and 20 kDa), respectively. Lower conversions were observed for high‐molecular weight macroinitiators ( ≥ 60 kDa). Overall, an improvement of between 10 and 20% was observed when comparing the Cat. 1 system to a conventional Cu‐catalyzed system. This significant improvement in macroinitiator‐to‐star conversion is explained in the context of catalyst system selection and CCS polymer formation.