Ink‐Jet Printing of Metallic Nanoparticles and Microemulsions

Summary: Two types of ink‐jet inks are presented: ink containing an aqueous dispersion of silver nanoparticles and an oil‐in‐water microemulsion‐based ink. The metallic ink contains nanoparticles of silver, which are formed in the presence of an ionic polymeric stabilizer. Sintering of the printed image obtained with the use of such silver‐based inks at temperatures as low as 300 °C results in formation of patterns possessing noticeable conductivity. The microemulsion inks are based on a thermodynamically stable microemulsion, in which the dispersed oil phase is a volatile solvent containing a water‐insoluble colorant. After contact of the jetted ink droplets with a substrate, nanodroplets of the microemulsion are converted into nanoparticles of the solubilized colorant. In some cases, it was found that the evaporation of microemulsion ink droplets leads to formation of rings composed of ordered nanoparticles.

Scheme of ink‐jet printing of an oil‐in‐water microemulsion followed by conversion of the nanodroplets into nanoparticles, caused by quick evaporation of the solvent within the microemulsion droplets. Therefore, the ink behaves as a dye‐based ink prior to printing, but after printing it behaves like a pigment‐based ink.     

One‐Step Synthesis and Size Control of Dendrimer‐Protected Gold Nanoparticles: A Heat‐Treatment‐Based Strategy

Dendrimer‐protected gold nanoparticles have been facilely obtained by heating an aqueous solution containing third‐generation poly(propyleneimine) dendrimers and HAuCl₄ without the additional step of introducing other reducing agents. Transmission electron microscopy (TEM) and UV‐vis data indicate the size, the nucleation, and growth kinetics of gold nanoparticles thus formed, which can be tuned by changing the initial molar ratio of dendrimer to gold.

The formation of dendrimer–gold nanoparticles by the heat treatment of an aqueous solution containing third‐generation poly(propyleneimine) dendrimers and HAuCl₄.     

Facile Surface Superhydrophilic Modification: NVP/MBA Inverse Microemulsion Surface‐Grafting Polymerization Initiated by UV Light

Summary: Superhydrophilic modification of poly(propylene) and poly(ethylene terephthalate) films' surfaces was realized by the UV‐initiated surface photografting of a N‐vinyl pyrrolidone/N,N′‐methylenebisacrylamide inverse microemulsion. AFM characterization of the treated films' surface revealed that it was the grafted quasi‐bimodal (ca. 45 and 110 nm) particles of cross‐linked poly(N‐vinyl pyrrolidone) that led to superhydrophilicity of the surface. The grafted nanometer‐scale particles showed little influence on the transparency of the substrate's surface, but endowed long‐term stability to the superhydrophilicity.

The surface morphology of the PP film grafted with a NVP/MBA inverse microemulsion via a one‐step method. Quasi‐bimodal particles (ca. 45 nm and 110 nm) were tethered on the film's surface, and the corresponding surface water CA fell below 5°.     

Structured Hybrid Nanoparticles via Surface‐Initiated ATRP of Methyl Methacrylate from Ordered Mesoporous Silica

Structured hybrid nanoparticles were synthesized via surface‐initiated atom transfer radical polymerization of MMA from ordered mesoporous silica (OMS) nanoparticles with various morphologies. The design of the OMS particles was adjusted to target either spherical core‐shell or cylindrical morphologies with a mean diameter below 400 nm. The polymer growth via ATRP from the silica surface was well‐controlled as demonstrated by the macromolecular characteristics of the grafted chains. Original hybrid multilayered nanoparticles composed of either a dense silica core or hollow core; an inner OMS shell showing radial orientation of the mesopores and an outer PMMA shell with controlled thickness were successfully prepared.

     

Orienting the Demixion of a Diblock‐copolymer Using 193 nm Interferometric Lithography for the Controlled Deposition of Nanoparticles

DUV interferometric lithography and diblock copolymer self‐organization have successfully been combined to provide a simple and highly collective nanopatterning technique enabling the organization of nanoparticles over several orders of magnitude, from nanometre to millimetre. The nanostructural changes at the surface of the polymer film after thermal annealing have been monitored by AFM and the process parameters optimized for obtaining a long‐range organization of the lamellar domains. In particular, the impact of the annealing conditions and geometric parameters of the substrate patterns have been investigated. The nanopatterns resulting from the lamellar demixion of (PS‐b‐MMA) were used for a controlled deposition of nanoparticles. The affinity of the hydrophobic particles for the PS block was demonstrated, opening new doors towards the preparation of high‐density arrays of nanoparticles with potential applications in data storage.

     

Microstructure,Kinetics, and Transport in Oil‐in‐Water Microemulsion Polymerizations

The kinetics of microemulsion polymerization depend on the structure of the initial microemulsion and the transport of species between the aqueous domain, the micelles, and the polymer particles. The water solubility of the monomer and the proximity of the initial microemulsion composition to a phase boundary are key considerations for studying microemulsion polymerization kinetics and producing the desired products. Complications frequently arise in the synthesis of copolymers or the incorporation of controlled polymerization mechanisms because of the compartmentalized nature of microemulsion polymerizations.

     

A Novel Route for Fabricating Metal‐Polymer Composite Nanoparticles with Phase‐Separated Structures

Au nanoparticles (NPs) and polymer composite particles with phase‐separation structures were prepared based on phase separation structures. Au NPs were successfully synthesized in amphiphilic block‐copolymer micelles, and then composite particles were formed by a simple solvent evaporation process from Au NPs and polymer solution. The phase separated structures (Janus and Core‐shell) were controlled by changing the combination of polymers having differing hydrophobicity.

     

Gold Nanoparticles Functionalized by a Dextran‐Based pH‐ and Temperature‐Sensitive Polymer

A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.

     

Novel Water‐Soluble Shape‐Regulatable Luminescent Nanoparticles by Non‐Covalently Bonded Self‐Assembly

Summary: Novel non‐covalently connected water‐soluble nanoparticles that contain poly(fluorene‐co‐phenylene) with hydroxy‐capped alkoxy side chains (PF3BOH) and poly(acrylic acid) (PAA) have been obtained and characterized. With different proportions of PF3BOH and PAA, the shape and size of the nanoparticles can be regulated. The nanoparticles are quite stable in water with no precipitate being observed after weeks. Transmission electron microscopy and dynamic laser light scattering are used to confirm the morphology of the PF3BOH/PAA nanoparticles. Their optical properties have been investigated and show similar optoelectronic properties to a PF3BOH solid film although they do not undergo aggregation.

TEM images of the nanoparticles obtained upon varying the PAA/PF3BOH content.     

Phase Separation and Organisation of Colloidal Spheres Suspended in Sheared Lyotropic Liquid‐Crystalline Polymers

Summary: Organisation behaviours of spherical particles suspended in sheared, lyotropic, liquid‐crystalline polymer solutions have been investigated using polarizing optical microscopy. We find that in a nematic phase the particles phase separate and adopt anisotropic chain‐like structures along the director. An earring defect is observed around a single particle whereas a cross or strings defect between neighbouring particles is found to serve as a repulsive barrier to prevent the particles from contacting each other. A theoretical analysis is presented to explain this new phenomenon.

An optical micrograph of 0.01 wt.‐% glass spheres suspended in a nematic solution of 40 wt.‐% ethyl cellulose in chloroform under an external shear force.     

Nanoparticle Vesicles Through Self Assembly of Cyclodextrin‐ and Adamantyl‐Modified Silica

Stable nanoparticle vesicles were for the first time prepared from adamantyl‐ and cyclodextrin (CD)‐modified silica nanoparticles forming host–guest interactions in aqueous solution. Adamantyl‐functionalized nanoparticles were obtained from thiol‐isocyanate reaction of thiol‐modified nanoparticles with 1‐adamantyl isocyanate. The CD modified silica particles were isolated from a reaction of mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin with the thiol functionalized silica under microwave conditions in basic media. The obtained particles were characterized in respect of agglomeration and self‐assembly behavior in aqueous solution by dynamic light scattering and transmission electron microscopy. The found vesicle structures are exceptionally stable even after evaporation of water. Such inorganic hollow spheres formed through self‐assembly processes may be important for chemical storage and transport. The technique of chemically‐driven assembly is an attractive option to form useful complex structures by tunable agglomeration.

     

A Self‐Assembling Polythiophene Functionalised with a Cysteine Moiety

A new copolymer bearing a cysteine moiety, designed for molecular interaction, metal‐ion detection, and chiral recognition, was synthesised starting from the dibromo derivative of methyl N‐(tert‐butoxycarbonyl)‐S‐thien‐3‐ylcysteinate and distannylthiophene through a Stille coupling reaction. UV‐vis spectroscopy, circular dichroism, NMR spectroscopy, and gel permeation chromatography analyses evidenced that this polymer is able to form self‐assembling structures, through the formation of a hydrogen‐bond network, not only in the solid state but also in solution.

     

Synthesis of Nanosized (<20 nm) Polymer Particles by Radical Polymerization in Miniemulsion Employing in situ Surfactant Formation

A novel method for synthesis of ultrafine polymeric nanoparticles of diameters less than 20 nm has been developed. The method is based on miniemulsion polymerization exploiting combination of the in situ surfactant generation approach (whereby the surfactant is formed at the oil–water interface by reaction between an organic acid and a base) and ultrasonication. Conventional radical polymerization and nitroxide‐mediated radical polymerization of styrene have been conducted in miniemulsion using oleic acid/potassium hydroxide, demonstrating that particles with diameters less than 20 nm can be obtained by this approach at surfactant contents much lower than traditionally required in microemulsion polymerizations.

     

Crystal‐to‐Crystal Photoinduced Electron Transfer Generating Photoacids to Formulate Water‐Borne Photopolymers

Casting a photopolymer solution to form a film, followed by imagewise photoirradiation and subsequent wet development, leads to photolithography. Whereas the wet development is achievable with aqueous alkali, the emission of an organic solvent as a volatile organic compound (VOC) is usually inevitable during the film casting because ingredients of common photopolymers are insoluble in water. We show here a prototype of water‐borne photopolymers dispersed with milled nanoparticles of poorly water‐soluble photoacid generators (PAGs), which undergo solid‐state photolysis to liberate a photoacid to make a poly(vinyl alcohol) film insoluble in water with the aid of an acid‐sensitive crosslinking reagent. The photolysis of onium‐type PAGs is sensitized in the solid state simply by comilling with water‐insoluble sensitizers to extend spectral sensitivity of this kind of photopolymers. Fluorescence quenching measurements revealed that the solid‐state sensitization occurs through exciton migration in sensitizer particles followed by electron transfer to PAG particles.

     

Nitroxide‐Mediated Radical Polymerization in Microemulsion

Nitroxide‐mediated polymerizations of styrene in microemulsion have been carried out at 125 °C using the cationic surfactant tetradecyltrimethylammonium bromide and the nitroxides 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO) and N‐tert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)] nitroxide (SG1). TEMPO‐mediated polymerizations were extremely slow, with large particles (d_n = 39–129 nm) and broad molecular weight distributions (MWDs). The origin of the broad MWDs was likely significant alkoxyamine decomposition and differing diffusion rates of monomer and low MW alkoxyamines (and nitroxide) between monomer‐swollen micelles and polymer particles. SG1‐mediated polymerizations proceeded at higher rates, resulting in nanoparticles (d_n = 21–37 nm) and lower than for TEMPO.

     

Electrically Conductive Poly(DL‐lactide)/Chitosan/Polypyrrole Complexes

Summary: The fabrication of novel conductive poly(DL ‐lactide)/chitosan/polypyrrole complex membranes is reported. Using poly(DL ‐lactide)/chitosan blends as matrices and polypyrrole as a conductive component, several kinds of membranes with various compositions are prepared. A percolation threshold of polypyrrole as low as 1.8 wt.‐% is achieved for some membranes by controlling the chitosan proportion between 40 and 50 wt.‐%. SEM images exhibit that the membranes with a low percolation threshold show a two‐phase structure which consists of poly(DL ‐lactide) and chitosan phases. Dielectric measurements indicate that there is limited miscibility between the poly(DL ‐lactide) and chitosan but polypyrrole is nearly immiscible with the other two components. Based on the structural characteristics of the membranes, the polypyrrole particles are suggested to be localized at the interface between two phases.

Dependence of conductivity of complex membranes on the PPy content. (○) PDLLA/PPy, (▪) PDLLA/ch(10)/PPy, (▵) PDLLA/ch(20)/PPy, (•) PDLLA/ch(30)/PPy, (□) PDLLA/ch(40)/PPy, and (▴) PDLLA/ch(50)‐PPy.     

Molecularly Imprinted Multi‐Layer Core‐Shell Nanoparticles – A Surface Grafting Approach

Surface initiated living‐radical polymerization (SIP) based on dithiocarbamate iniferters has been used to create molecularly imprinted core‐shell (CS) nanoparticles. Using this approach, propranolol, morphine and naproxen have been successfully imprinted in particle shells (the latter could not be imprinted using conventional aqueous‐based CS methods). Rebinding properties of the imprinted particles appear to be similar to those made by alternative methods. The living radical initiation mechanism makes it possible to build complex multi‐layer particles sequentially. As a demonstration, multi‐layer propranolol‐imprinted particles were generated. Two additional functional shells were grown over the imprinted shell, while the propranolol binding was retained, albeit at a reduced level.

     

Ordered Honeycomb‐Structured Films from Dendronized PMA‐b‐PEO Rod‐Coil Block Copolymers

Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO₁₁₃‐b‐PDMA₈₂) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.

     

Synthesis of High Solid‐Content Latex using Alkali‐Soluble Resin as Sole Surfactant

Summary: A novel polymerization procedure to synthesize latex stabilized by alkali‐soluble resin (ASR) is detailed. According to this process, latexes with a high solid content and low viscosity are obtained using a substantially lower amount of ASR when compared with existing techniques. Similar rewet properties were found for the latexes obtained by a standard process and for the one obtained by the process described in this work.

Comparison of the particle size distributions obtained by conventional emulsion polymerization (○) and by miniemulsion polymerization (□).     

Phantom Chain Simulations of Realistically Sized Polymer‐Based Nanocomposites

Summary: Phantom chain MC simulations have been performed for realistically sized systems of polymer chains filled with solid nanoparticles. The results of the simulations and simple theoretical considerations are used to rationalize a number of parameters relevant to the characterization of these systems. Even when the average number of nanoparticles in contact with a chain is very small (much less than unity), the nanoparticles are nodes of highly interconnected transient networks bridged by the polymer chains.