微波辅助有机过氧化物功能化修饰单壁碳纳米管

本文报道了微波辅助下,利用过氧化月桂酰分解得到的十一烷基,化学功能化修饰单壁碳纳米管。这种快速、高效的方法将反应时间缩短至10分钟,并得到了比传统回流方法具有更高接枝率的产物。利用傅立叶变换红外光谱(FT-IR),热失重分析(TGA),拉曼光谱,探究了不同的反应时间和微波功率对单壁碳纳米管的接枝率的影响。结果表明：过长的反应时间会导致部分的去功能化的发生,而过高的微波功率(大于900瓦),则会将单壁碳纳米管上起初键连上的十一烷基剥落下来。分散性照片和高分辨率透射电子显微镜(HRTEM)照片显示出,功能化后的单壁碳纳米管与原始的碳管相比,在有机溶剂中的分散性有了明显的提高。     

Sorting Semiconducting Single‐Walled Carbon Nanotubes by Water‐Soluble Polyfluorene Assisted Electrophoresis and Its Application in Field‐effect Transistors

We report a considerably promising method based on agarose gel electrophoresis (AGE) to separate single‐walled carbon nanotubes by adding a water‐soluble polyfluorene (w‐PFO) as surfactant into the agarose gel. In this effective method, the AGE/w‐PFO gel network will trap more semiconducting single‐walled carbon nanotubes (SWNTs) with the assistance of w‐PFO, for the strong interaction between w‐PFO and semiconducting species. The optical absorbance, photoluminescence emission and resonant Raman scattering characterization were used to verify the separation effect. The purity of separated semiconducting species is as high as (98±1)%. The demonstrated field effect transistors give the on/off ratio and mobility about 27000 and 10.2 cm²·V^?1·s^?1, respectively.     

DFT Studies of Ag‐Loading Intrinsic and Functionalized Single‐Walled Carbon Nanotubes

The first principles study was performed on the stability of Ag adsorbed on the internal walls of single‐walled carbon nanotube (SWCNT) and loaded on acid modified SWCNT. The calculation results show that Ag can be adsorbed stably on the internal walls of SWCNT. With the increase of SWCNT diameter, the adsorption energy increases in a certain range. Ag can also be loaded on the modified SWCNT surface in the form of COOAg and OAg groups, and COOAg group is more stable than OAg group. For either the adsorption on the inner SWCNT or the load on the modified SWCNT surface, only a small proportion of the Ag ions can be stably bonded to the walls of SWCNT.     

A Supramolecularly Assisted Transformation of Block‐Copolymer Micelles into Nanotubes

Once around the block : Incorporation of a rigid hydrogen‐bonding benzamide unit, placed at the interface between two polymer blocks, in poly(ethylene glycol) (PEG)–(thio)urea–poly(L ‐lactide) (PLLA) block copolymers transforms the morphology of the block copolymers, from spherical micelles, as formed by PEG‐PLLA diblock copolymers, into nanotubes in solution.

     

Spatially Controllable DNA Condensation by a Water‐Soluble Supramolecular Hybrid of Single‐Walled Carbon Nanotubes and β‐Cyclodextrin‐Tethered Ruthenium Complexes

A supramolecular hybrid is prepared by the supramolecular surface modification of single‐walled carbon nanotube (SWCNT) with cationic β‐cyclodextrin‐tethered ruthenium complexes through a spacer molecule that contains both an adamantane and a pyrene moiety. By employing the supramolecular hybrid, spatially controllable DNA condensation along the SWCNT skeleton is achieved by anchoring cationic ruthenium complexes on the surface. Furthermore, because of the unique physiological properties of SWCNTs, the cationic supramolecular hybrid can be used as a nonviral gene delivery system with the ruthenium complexes as a fluorescent probe to monitor uptake of DNA by cells.     

Carbon Nanotubes Fed on “Carbs”: Coating of Single‐Walled Carbon Nanotubes by Dextran Sulfate

A facile and easily reproducible technique for assembling biohybrid nanoparticles is a core feature that is highly desired for biomedical applications, considering the nature and limited lifespan of the biopolymers used. Here we show a simple and effective method to enfold single‐walled carbon nanotubes (SWNTs) using an anionic polysaccharide, dextran sulfate. After their interactions, SWNTs were rendered dispersible in aqueous solution and were shortened and unbundled to their basic dimension. Atomic force microscopy analysis was extensively employed to elucidate the mechanism of their interfacing. This biohybrid nanoparticle holds promise for biological and biomedical applications due to the synergistic unique properties of SWNTs and dextran sulfate.

     

Electrochemical Behavior and Determination of L‐Tyrosine at Single‐walled Carbon Nanotubes Modified Glassy Carbon Electrode

Based on single‐walled carbon nanotubes (SWCNTs) modified glassy carbon electrode (GCE/SWCNTs), a novel method was presented for the determination of L ‐tyrosine. The GCE/SWCNTs exhibited remarkable catalytic and enhanced effects on the oxidation of L ‐tyrosine. In 0.10 mol/L citric acid‐sodium citrate buffer solution, the oxidation potential of L ‐tyrosine shifted negatively from +1.23 V at bare GCE to +0.76 V at GCE/SWCNTs. Under the optimized experimental conditions, the linear range of the modified electrode to the concentration of L ‐tyrosine was 5.0×10^?6–2.0×10^?5 mol/L (R₁=0.9952) and 2.7×10^?5–2.6×10^?4 mol/L (R₂=0.9998) with a detection limit of 9.3×10^?8 mol/L. The kinetic parameters such as α (charge transfer coefficient) and D (diffusion coefficient) were evaluated to be 0.66, 9.82×10^?5 cm² s^?1, respectively. And the electrochemical mechanism of L ‐tyrosine was also discussed.     

Partially Oxidized Graphene/Metallic Single‐Walled Carbon Nanotubes Film‐Coated Electrode for Nanomolar Detection of Dopamine

Enriched metallic single‐walled carbon nanotubes (mSWCNTs) were dispersed in aqueous solution of partially oxidized graphene (po‐Gr). As‐prepared po‐Gr/mSWCNTs suspension was used to modify glassy carbon electrode (GCE) surface, which showed high electrocatalytic activity for dopamine (DA) oxidation in pH 7.0 phosphate buffered saline (PBS) solution. Using po‐Gr/mSWCNTs/GCE we could detect DA from 350 to 3600 nM, with a detection limit down to 25 nM in physiological condition (in pH 7.0 PBS); whereas, po‐Gr/GCE (without mSWCNTs) and bare GCE produced measurable signals only at or above 200 nM DA. Thus, the po‐Gr/mSWCNTs film we fabricated is a promising nanomaterial for fabrication of biosensors for nanomolar detection of DA.     

Transparent and Conductive Polyethylene Oxide Film by the Introduction of Individualized Single‐Walled Carbon Nanotubes

It is demonstrated that an optically transparent and electrically conductive polyethylene oxide (PEO) film is fabricated by the introduction of individualized single‐walled carbon nanotubes (SWNTs). The incorporated SWNTs in the PEO film sustain their intrinsic electronic and optical properties and, in addition, the intrinsic properties of the polymer matrix are retained. The individualized SWNTs with smaller diameter provide high transmittance as well as good electrical conductivity in PEO films.

     

Polyampholyte‐Wrapped Carbon Nanotubes: Preparation and Internalization by Embryonic Fibroblast Cells

The cytotoxicity and cellular uptake of carbon nanotubes (CNTs) has recently attracted considerable interest because of the issue of biosphere‐nanomaterial interactions. The biocompatibility of CNTs is determined by the metal impurities in the CNTs, the size of the CNTs and the CNT dispersion states; in particular, the type of surface modifications on the CNTs affects how they interact with cells and determines their cytotoxicity and cellular uptake. In this study, biocompatible single‐walled carbon nanotubes (SWNTs) wrapped with a water‐soluble copolymer, poly[2‐(dimethylamino)ethyl methacrylate‐co‐methacrylic acid] (PDM), were prepared. We report that these SWNTs have enhanced water dispersibility and cellular internalization but no significant cytotoxic activity against mouse embryonic fibroblast NIH‐3T3 cells.

     

Functionalization of Multi‐Walled Carbon Nanotubes by Electrografting of Polyacrylonitrile

Summary: Multi‐walled carbon nanotubes (MWNTs) have been successfully modified with polyacrylonitrile (PAN) by a cathodic electrochemical process. The surface‐modified MWNTs afforded are then dispersible in good solvents for PAN, such as N,N‐dimethylformamide (DMF). Collected from a dilute dispersion, these MWNTs are essentially disentangled, as confirmed by transmission electron microscopy (TEM) analysis. From the differential scanning calorimetry (DSC) traces for polyacrylonitrile and polyacrylonitrile‐grafted MWNTs, the maximum grafting ratio is estimated at 0.28.

Electrochemical grafting of polyacrylonitriles onto the surface of multi‐walled carbon nanotubes.     

A Nitric Oxide Biosensor Based on Myoglobin Adsorbed on Multi‐Walled Carbon Nanotubes

Myoglobin (Myb) of horse heart is incorporated on multi‐walled carbon nanotubes (MWNTs) and immobilized at a glassy carbon (GC) electrode surface. Its electrochemical behavior and enzyme activity are characterized by employing electrochemical methods. The results indicate that MWNTs can obviously promote the direct electron transfer between Myb and electrode, and that the Myb on MWNTs behaves as an enzyme‐like activity towards the electrochemical reduction of nitric oxide (NO). Accordingly, an unmediated NO biosensor is constructed. Experimental results reveal that the peak current related to NO is linearly proportional to its concentration in the range of 2.0×10^?7–4.0×10^?5 mol/L. The detection limit is estimated to be 8.0×10^?8 mol/L. Considering a relative standard deviation of 2.1% in seven independent determinations of 1.0×10^?5 mol/L NO, this biosensor shows a good reproducibility. The biosensor based on Myb/MWNTs modified electrode can be used for the rapid determination of trace NO in aqueous solution with a good stability, nice selectivity and easy construction.     

A Sensitive Simultaneous Determination of Adrenalin and Paracetamol on a Glassy Carbon Electrode Coated with a Film of Chitosan/Room Temperature Ionic Liquid/Single‐Walled Carbon Nanotubes Nanocomposite

The present work demonstrates that simultaneous determination of adrenalin (AD) and paracetamol (PAR) can be performed on single‐walled carbon nanotube/chitosan/ionic liquid modified glassy carbon electrode (SWCNT‐CHIT‐IL/GCE). The electro‐oxidations of AD and PAR were investigated with cyclic voltammetry (CV), differential pulse voltammetry (DPV) and also chronoamperometry (CA) methods. DPV experiments showed that the oxidation peak currents of AD and PAR are proportional to the corresponding concentrations over the 1–580 μmol/L and 0.5–400 μmol/L ranges, respectively. The RSD at a concentration level of 15 μmol/L AD and 15 μmol/L PAR were 1.69% and 1.82%, respectively. Finally the modified electrode was used for simultaneous determination of AD and PAR in real samples with satisfactory results.     

Multi‐Walled Carbon Nanotubes (MWCNT)‐Ionic Liquid‐Modified Carbon Paste Electrode: Probing FurazolidoneDNA Interactions and DNA Determination

The interactions of furazolidone (Fu) with double‐stranded calf thymus DNA (dsDNA) on the multi‐walled carbon nanotubes‐ionic liquid‐modified carbon paste electrode (MWCNT‐IL‐CPE) have been studied by cyclic voltammetry. In the presence of DNA, the cathodic peak current of Fu decreased and the peak potential shifted to a positive potential, indicating the intercalative interaction of Fu with DNA. The binding constant of Fu with DNA and stoichiometric coefficient has been determined according to the Hill's model. This electrochemical method was further applied to the determination of DNA. Two linear calibration curves were obtained for DNA detection in the concentration ranges of 0.03–0.10 and 0.10–4.0 μg l^?1 with a detection limit of 0.027 μg l^?1. The method was successfully applied to analyze Fu in serum samples.     

Colloid‐Assisted Self‐Assembly of Robust,Three‐Dimensional Networks of Carbon Nanotubes over Large Areas

Natural materials, such as bone and spider silk, possess remarkable properties as a result of sophisticated nanoscale structuring. They have inspired the design of synthetic materials whose structure at the nanoscale is carefully engineered or where nanoparticles, such as rods or wires, are self‐assembled. Although much work has been done in recent years to create ordered structures using diblock copolymers and template‐assisted assembly, no reports describe highly ordered, three‐dimensional nanotube arrays within a polymeric material. There are only reports of two‐dimensional network structures and structures on micrometer‐size scales. Here, we describe an approach that uses plasticized colloidal particles as a template for the self‐assembly of carbon nanotubes (CNTs) into ordered, three‐dimensional networks. The nanocomposites can be strained by over 200% and still retain high conductivity when relaxed. The method is potentially general and so may find applications in areas such as sensing, photonics, and functional composites.

     

The Heterogeneity of Multiwalled and Single‐Walled Carbon Nanotubes: Iron Oxide Impurities Can Catalyze the Electrochemical Oxidation of Glucose

It is well established that the heterogeneity of carbon nanotubes must be determined before the origin of the electrochemical performance can be attributed. Recently it has been diligently reported that for the case of multiwalled carbon nanotube modified electrodes, copper oxide impurities are responsible for the electrochemical activity facilitating a nonenzymatic sensing strategy towards glucose. We have explored both commercially available multiwalled and single‐walled carbon nanotubes for the sensing of glucose and find that iron oxide impurities remaining from the fabrication process are the electroactive sites facilitating the nonenzymatic detection of glucose. Given that the multiwalled carbon nanotubes in this work are purchased from the same leading supplier as that used recently, discrepancies in the fabrication process exist which clearly has implications in the commercialization of electrochemical sensors based on multiwalled carbon nanotubes.     

Electrooxidation of Chlorophenols Catalyzed by Nickel Octadecylphthalocyanine Adsorbed on Single‐Walled Carbon Nanotubes

We described the synthesis of nickel octadecylphthalocyanine (NiPc(C₁₀H₂₁)₈), followed by its adsorption on single‐walled carbon nanotubes (SWCNT) to form SWCNT‐NiPc(C₁₀H₂₁)₈ conjugates. SWCNT‐NiPc(C₁₀H₂₁)₈ was used to modify a glassy carbon electrode (GCE) and for the electrooxidation of 4‐chlorophenol and 2,4‐dichlorophenol. The SWCNT and NiPc(C₁₀H₂₁)₈ have a synergistic effect on each other in terms of improving electrocatalysis for the detection of chlorophenols. The stability of the electrode improved in the presence of NiPc(C₁₀H₂₁)₈ or NiPc compared to the bare GCE. The presence of SWCNT improves the electrocatalytic behaviour of NiPc(C₁₀H₂₁)₈ but not of unsubstituted NiPc. All modified electrodes showed improved stability towards the detection of 2,4‐dichlorophenol. The best stability for 4‐CP detection was observed in the presence of SWCNT for NiPc(C₁₀H₂₁)₈.     

Electrochemical DNA Sensing at Single‐walled Carbon Nanotubes Chemically Assembled on Gold Surfaces

An electrochemical DNA sensor was constructed using single‐walled carbon nanotubes (SWNTs) attached to a self‐assembled monolayer of 11‐amino‐1‐undecanethiol on a gold surface. The voltammetric peak of methylene blue (MB), which interacts with the DNA guanine bases specifically, was used to follow the DNA hybridization process. After DNA hybridization with its complementary DNA strand, the MB electrochemical signal response decreased and the change in MB signal response was used as the basis for the electrochemical sensing of DNA hybridization. The as described DNA sensor demonstrated to have good stability, selectivity, a linear response over the DNA concentration range from 100 to 1,000 nM and a limit of detection of 7.24 nM.