Synthesis and Self‐Assembly of Amphiphilic Diblock Copolymers using a Fluorescently Labeled N‐Alkoxyamine Initiator

Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.

     

Single‐Chain‐Particles of Poly(N‐isopropylacrylamide)

Spherical single‐chain‐particles of poly(N‐isopropylacrylamide) were prepared in aqueous solution above the lower critical solution temperature upon the addition of sodium dodecyl sulfate. The size of the single‐chain‐particles was investigated by means of transmission electron microscopy and viscosity measurements of the corresponding solutions, indicating the absence of inter‐chain entanglements among the single‐chain‐particles.

Schematic of the preparation of PNIPAM single‐chain‐globules in solution.     

Synthesis and Characterization of Helix‐Coil Diblock Copolymers with Controlled Supramolecular Architectures in Aqueous Solution

Summary: A series of helix‐coil diblock copolymers based on poly(ethylene oxide) and optically active helical poly{(+)‐2,5‐bis[4′‐((S)‐2‐methylbutoxy)phenyl]styrene} (PMBPS) were synthesized via atom transfer radical polymerization (ATRP). The synthetic methodology permitted straightforward preparation of the diblock copolymers with relatively low polydispersities and a broad range of compositions and molecular weights. Depending on the composing block length and the initial concentration, the copolymers self‐assembled into different supramolecular structures in aqueous solution, including spherical micelles, vesicles, multilamellar vesicles, large compound vesicles, and tubules.

Schematic representation of the synthesis of PEO‐b‐PMBPS block copolymers and their aggregation in aqueous solution.     

Unprecedented Blue Intrinsic Photoluminescence from Hyperbranched and Linear Polyethylenimines: Polymer Architectures and pH‐Effects

The intrinsic photoluminescence properties of hyperbranched polyethylenimines (PEIs) and their linear counterpart (LPEIs) have been studied in absence of any classical fluorescent probes. The comparison of the inherent fluorescence emission between hyperbranched polyethylenimines and their linear analogues demonstrates that linear polyamines are capable of producing strong intrinsic photoluminescence species having long excited lifetimes without need of having a tridimensional‐branched structure. The creation of inherently fluorescent polymeric centers from hyperbranched and linear polyethyleimines can be modulated by specific chemical modification and oxidation of amine groups as well as by adjusting the acidity of the polymer.

     

Polypeptoids by Living Ring‐Opening Polymerization of N‐Substituted N‐Carboxyanhydrides from Solid Supports

The nucleophilic living ring‐opening polymerization of N‐substituted glycine N‐carboxyanhydrides using solid‐phase synthesis resins is reported. By variation of experimental parameters, products with near Poisson distributions are obtained. As opposed to reversible deactivation radical polymerization, the living polymerization is demonstrated to be viable to high monomer conversion and through multiple monomer addition steps. Successful preparation of a multiblock copolypeptoid is proof for a highly living and robust character of the solid‐phase peptoid polymerization.

     

Radical Desorption Kinetics in Emulsion Polymerization, 2 – Brownian Dynamics Simulation of Radical Desorption in Non‐Homogeneous Particles

One of the most important events in free‐radical emulsion polymerization is desorption of radicals from the polymer particles to the aqueous phase. Desorption takes place by diffusion of radicals inside the particle toward the surface and transfer to the aqueous phase. The rate of desorption can be determined theoretically for homogeneous spherical particles. For more complex cases, analytical solutions become difficult or impossible to obtain and a numerical approach is better suited for estimating desorption rate coefficients. In this paper, Brownian dynamics simulation is used for the estimation of desorption rate coefficients in emulsion polymerization systems of increased complexity, in particular for non‐homogeneous polymer particles.

     

Synthesis of Conjugated Polymer Nanoparticles in Non‐Aqueous Emulsions

Summary: A novel non‐aqueous emulsion system, consisting of cyclohexane as the continuous and acetonitrile as the dispersed phase, is described. Stabilization of the system can be achieved by using polyisoprene‐block‐poly(methyl methacrylate) copolymers as emulsifiers. The suitability of this system for performing water‐sensitive, catalytic, and oxidative polymerizations and polycondensations is demonstrated by the synthesis of poly(3,4‐ethylenedioxythiophene), poly(thiophene‐3‐yl‐acetic acid), and polyacetylene. In all cases spherical nanoparticles with diameters as small as 23 nm can be obtained.

     

Spiropyran‐Based Polymeric Vesicles: Preparation and Photochromic Properties

A direct access to photochromic polymeric vesicles was demonstrated via polymerization‐induced self‐assembly and reorganization (PISR). The resulting vesicles displayed interesting photochromic behaviors different from that of their free polymer chains in DMF, and the vesicles exhibited stronger fluorescence and excellent photostability due to confinement of conformational flexibility of the polymer chains in aggregates.

     

Micellization Phenomena in Semicrystalline Block Copolymers: Reflexive and Critical Views on the Formation of Cylindrical Micelles

Investigations on the self‐assembly of block copolymers in solution have in some way a less well‐studied history than the study of their phase separation in the solid state, and many aspects are yet not completely understood. Here we focus on the behavior of a specific class of copolymers, namely semicrystalline block copolymers, capable of forming cylindrical aggregates in a solvent selective for the non‐crystalline, complementary block. A common model of micellization is proposed, in principle applicable to most of these copolymeric systems.

     

Color‐Oscillating Photonic Crystal Hydrogel

In this work, a color‐oscillating system is first developed by combining the intrinsic peristaltic motion of a Landolt pH‐oscillator with the structure color of a well‐designed pH‐sensitive photonic crystal hydrogel. As a result, the pH oscillation reaction procedure could be distinctly monitored by the distinct change of structure color/optic signal. The oscillation rhythm of the pH well coincides with that of the stopband/structure color. The oscillation detail of each cycle can also be clearly monitored by color change. This work would be of great significance for the promising applications of real‐time monitoring of the microactuator by optical signal or structure color.

     

Continuous Controlled Radical Polymerization of Methyl Acrylate in a Copper Tubular Reactor

The use of copper tubing as both the reactor and as a catalyst source is demonstrated for continuous controlled radical polymerization of methyl acrylate at ambient temperature and at low solvent content of 30%. The high surface area provided by the copper walls mediates the reaction via the single electron transfer–living radical polymerization (SET‐LRP) mechanism. The polymerizations proceeded quickly, reaching 67% conversion at a residence time of 16 min. Ligand concentration could also be reduced without a sharp drop in polymerization rate, demonstrating the potential for decreased raw material and post‐process purification costs. Chain extension experiments conducted using synthesized polymer showed high livingness. The combination of living polymer produced at high polymerization rates at ambient temperature and low volatile organic solvent content demonstrate the potential of a copper reactor for scale up of SET‐LRP.

     

Supramolecular Hydrogels with CdS Quantum Dots Incorporated by Host–Guest Interactions

In this communication, β‐cyclodextrin modified quantum dots were used as a water‐soluble “supramolecular” cross‐linker (SCL) because of its surface's supramolecular activity. The guest monomer‐loaded SCL (mSCL) can be used to copolymerize with water‐soluble monomers leading to transparent hybrid supramolecular hydrogels. This simple and versatile method opens new venues for the preparation of hybrid supramolecular hydrogels and the host–guest chemistry of cyclodextrins.

     

Synthesis and Surface Morphology of Tetraaniline‐block‐Poly(L‐lactate) Diblock Oligomers

Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.

Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects.     

Photoinitiators with Functional Groups, 8

Summary: Bimolecular type‐II photoinitiators for radical photopolymerization suffer from a diffusion‐controlled limitation of reactivity and from deactivation by back electron transfer. Here, a very efficient concept to increase the photoinitiator activity by the covalent binding of phenylglycine to benzophenone using a methylene spacer is presented. Photo‐DSC experiments proved that the rate of polymerization can be tripled in comparison to a physical mixture of the components or an industrially applied system with triethanolamine as coinitiator.

Structure of the new photoinitiator synthesized here.     

Two‐Photon Pattern Bleaching for Characterizing Structural Changes in Polymer Films

Using two‐photon absorption, an array of spots in a dye‐doped polymer film can be bleached, creating a three‐dimensional structure that can be imaged with two‐photon or confocal microscopy. Microscopic deformations resulting from various treatments to the film can be characterized, for example, swelling or shrinking. This technique is demonstrated on dye‐doped poly(vinyl alcohol), in which the effect of swelling with the addition of water to the film is shown.

     

A New Type of Thermoresponsive Copolymer with UCST‐Type Transitions in Water: Poly(N‐vinylimidazole‐co‐1‐vinyl‐2‐(hydroxymethyl)imidazole)

1‐Vinyl‐2‐(hydroxymethyl)imidazole ( 2 ) is synthesized by a procedure described in the literature. Corresponding copolymers with upper critical solution temperature (UCST)‐type transitions in water and high‐glass transition temperatures (T_g) are prepared by free radical copolymerization with N‐vinylimidazole ( 1 ). Depending on the copolymer composition, the cloud point can be varied between 19 and 41 °C. As the copolymer composition is identical with the monomer feed ratio, the cloud point can be easily tuned in the desired range. Furthermore, a distinctive pH‐dependence and salt effect can be observed.

     

Efficient Oxygen‐Induced Molar‐Mass Control of Poly(p‐phenylene vinylenes) Synthesized via the Gilch Route

Oxygen is shown to act as an efficient molar‐mass regulating agent in Gilch syntheses of PPV. As a scavenger, it undergoes instantaneous recombination with the initiating diradicals as soon as they appear in the system. Regular polymer formation can only start when all oxygen has been used, proceeding predominantly as chain‐growth polymerization of the p‐quinodimethane monomers. Since all radical species involved in this Gilch process are diradicals, some polyrecombination events occur in parallel. Therefore the initially formed peroxy diradicals are also incorporated into the resulting chains. Later, they break under very mild conditions, thereby causing a systematic decrease of the final molar mass of PPV.

     

Raspberry‐Like Aggregates Containing Secondary Nanospheres of Polystyrene‐block‐poly(4‐vinylpyridine) Micelles

Summary: Raspberry‐like aggregates containing secondary nanospheres were studied. The formation of raspberry‐like aggregates was due to complexation between core‐shell microspheres and core‐corona micelles. The core‐shell microspheres were synthesized with soap‐free polymerization of styrene and methyl acrylic acid, which included carboxyl groups in the periphery. The micelles were self‐assembled by polystyrene‐block‐poly(4‐vinylpyridine), which contained pyridine groups in the corona. The driven force to form raspberry‐like aggregates was due to the affinity between the carboxyl and pyridine groups. The morphology of the raspberry‐like aggregates could be tuned by changing the ratio of the microspheres to micelles. IR measurements suggested that the raspberry‐like aggregates were like zwitterions.

TEM image of the raspberry‐like aggregates formed at a molar ratio of MAA to 4VP at 1:4.     

Multiphase‐Separated Polyurethanes Studied by Micro‐Raman Spectroscopy

Micro‐Raman spectroscopy has been used to investigate the chemical micro‐heterogeneity of multiphase‐separated poly(ether urethanes) (PETU). Analysis of PETU cross‐sections by means of micro‐Raman spectroscopy revealed the nearly complete absence of soft segments in AI aggregates (called globules). These aggregates are in the order of a few micrometers in size. The composition of the matrix and the AII aggregates (spherulites) was comparable.

Example of an AFM image (sample 706, scan size 25 μm, converted to monochromatic image).