共查询到20条相似文献,搜索用时 46 毫秒
1.
Carolina García Angel E. Lozano Jos G. de la Campa Javier de Abajo 《Macromolecular rapid communications》2003,24(11):686-691
A novel tert‐butyl‐containing dianhydride was prepared from readily available reagents. It was reacted with various aromatic diamines to prepare a set of polyimides containing tert‐butyl pendent groups. The resulting polyimides exhibit high molecular weights (high inherent viscosity), and a combination of desirable properties, such as good solubility in aprotic amide solvents and cresols, high glass transition temperatures (up to 320 °C), high thermal resistance, film‐forming capability and good mechanical properties.
2.
Sophie Monge Olivia Giani Elodie Ruiz Manon Cavalier Jean‐Jacques Robin 《Macromolecular rapid communications》2007,28(23):2272-2276
The synthesis of primary amine end‐functional poly(tert‐butyl acrylate)s has been achieved by using the Gabriel reaction. Polymerization of tert‐butyl acrylate was first achieved by atom transfer radical polymerization using ethyl‐2‐bromoisobutyrate or paramethoxyphenyl‐2‐bromoisobutyrate as initiator. Both resulting polymers, with a bromide‐end atom, were converted into phthalimido intermediates which then were successfully hydrolyzed using potassium hydroxide in tert‐butyl alcohol to result in poly(tert‐butyl acrylate)s terminated by a primary amine function. End group interconversions were followed by 1H NMR, FT‐IR, and MALDI‐TOF MS measurements. All the results proved that quantitative transformations were achieved at each step. Moreover, the method developed is very easy to carry out.
3.
Several poly(ionic liquids) have been synthesized based on poly(1‐vinyl‐3‐tert‐butoxycarbonylmethylene imidazolium) salts with different counterions to investigate the tert‐butyl ester pyrolysis of these compounds. It is found that the counterions strongly influence the temperature of the pyrolysis. The pyrolysis temperature shifts to higher or lower temperatures depending on the nature of the counterions. The use of microwave irradiation was employed to accelerate the gas release because of the high dipolar interaction of amorphous salts with microwaves. The result of these reactions is the formation of organic foams that could be of industrial interest.
4.
A novel approach is employed to produce core–corona nanospheres, which introduces a stereoregular hydrophilic part to an amphiphilic block copolymer. The resultant morphology is reported using isotactic‐poly(methacrylic acid)‐block‐poly(butyl acrylate). Infrared spectroscopy revealed a supramolecular interaction, and X ray diffraction revealed the crystallization of the outer isotactic‐poly(methacrylic acid) part. The nanostructure, which looks like a nanosized ‘grape’, was formed when nanospheres and nanofibers coexisted simultaneously and partially fused.
5.
Summary: A multistep synthetic procedure for preparing novel C60‐anchored two‐armed poly(tert‐butyl acrylate) was developed. First, two‐armed poly(tert‐butyl acrylate) bearing a malonate ester core with well‐controlled molecular weight was synthesized through atom transfer radical polymerization. The effective Bingel reaction between C60 and the well‐defined polymer was then carried out to yield C60‐anchored polymer. GPC, 1H NMR, and UV‐vis spectroscopy indicated that the C60‐anchored polymer was a monosubstituted and ‘closed’ 6,6‐ring‐bridged methanofullerene derivative.
6.
A new route to synthesize amphiphilic core–shell particles that consist of well‐defined hydrophobic polymer cores and poly(vinylamine) (PVAm) shells has been developed. The PVAm was treated with a small amount of tert‐butyl hydroperoxide to generate free radicals that subsequently initiated both graft‐ and homo‐polymerization of vinyl monomer such as n‐butyl acrylate, methyl methacrylate, and styrene. Stable particles in the range from 100 to 250 nm in diameter with very narrow size distributions (polydispersity index between 1.08 and 1.15) were produced in high yields. TEM images of the particles revealed that they had well‐defined core–shell nanostructures with thick and hairy PVAm shells. The structures of the vinyl monomer and water‐soluble polymer were found to strongly influence the formation of particles and their sizes.
7.
Liqiong Liao Lijian Liu Chao Zhang Shaoqin Gong 《Macromolecular rapid communications》2006,27(24):2060-2064
Summary: Microwave‐assisted ring‐opening polymerization of ε‐caprolactone in the presence of 1‐butyl‐3‐methylimidazolium tetrafluoroborate ionic liquid using zinc oxide as a catalyst is investigated. By adding 30 wt.‐% ionic liquid, poly(ε‐caprolactone) with a weight‐average molar mass of 28 500 g · mol−1 is obtained at 85 W for 30 min. The results indicate that the polymerization could be efficiently enhanced in the presence of ionic liquids under microwave irradiation because ionic liquids can effectively absorb microwave energy.
8.
Per B. Zetterlund Hirotomo Yamazoe Bunichiro Yamada 《Macromolecular rapid communications》2003,24(2):197-201
Detection of the adduct radical by ESR spectroscopy and after‐effect ESR measurements of the adduct radical concentrations in the photosensitized polymerization of styrene (St) in the presence of dimers of α‐methylstyrene (MSD) and methyl methacrylate have revealed that the dominant mechanism of adduct radical loss changes from bimolecular termination to fragmentation as the temperature is increased beyond 90 °C for St/MSD.
9.
Carla V. Luciani Diana A. Estenoz Gregorio R. Meira Nancy L. García Hayde M. Oliva 《Macromolecular theory and simulations》2007,16(7):703-710
In relation to the bulk high‐impact polystyrene process, this work investigates the partition between phases of styrene and an initiator: tert‐butyl peroctoate. A Flory‐Huggins model was applied for predicting the phase separation point and the partitions of styrene and tert‐butyl peroctoate. For blends of styrene, polystyrene, and a styrene‐butadiene diblock copolymer, the model provides reasonable predictions of a ternary equilibrium diagram. For blends of styrene, polystyrene, polybutadiene, and tert‐butyl peroctoate, the partition of tert‐butyl peroctoate was measured at 25 °C. At emulated conversions of 13% or lower, equilibrium was reached after 1 h of mixing time. For the higher molar masses and conversion of 16%, equilibrium was not reached after 24 h of mixing time. To fit the equilibrium measurements, the solubility parameter of tert‐butyl peroctoate was adjusted.
10.
Mohamad Takwa Neil Simpson Eva Malmstrm Karl Hult Mats Martinelle 《Macromolecular rapid communications》2006,27(22):1932-1936
Summary: An enzymatic one‐pot procedure has been developed for the synthesis of difunctional polyesters containing terminal thiols and acrylates. Candida antarctica lipase B was used as a catalyst for the ring‐opening polymerization of ω‐pentadecalactone. The polymerization was initiated with 6‐mercaptohexanol, then terminated with γ‐thiobutyrolactone or vinyl acrylate to create two types of difunctional polyesters with a very high content of thiol‐thiol or thiol‐acrylate end‐groups.
11.
Mohamad‐Ali Tehfe Frdric Dumur Neus Vil Bernadette Graff Cdric R. Mayer Jean Pierre Fouassier Didier Gigmes Jacques Laleve 《Macromolecular rapid communications》2013,34(13):1104-1109
For polymer synthesis upon visible light, actual photoinitiator operates in a restricted part of the spectrum. As a consequence, several photoinitiators are necessary to harvest all of the emitted visible photons. Herein, 2,7‐di‐tert‐butyldimethyldihydropyrene is used for the first time as a multicolor photoinitiator for the cationic polymerization of epoxides. Upon addition of diphenyliodonium hexafluorophosphate and optionally N‐vinylcarbazole, the originality of this approach is to allow efficient monomer conversions under various excitation light sources in the 360–650 nm wavelength range: halogen lamps, and light‐emitting and laser diodes. The synthesis of an interpenetrated polymer network from an epoxide/acrylate blend using a red light at 635 nm is also feasible. The formed polymer material exhibits a photochromic character.
12.
Jatin Kumar Antoine Bousquet Martina H. Stenzel 《Macromolecular rapid communications》2011,32(20):1620-1626
A poly(tert‐butyl acrylate) (P(tBA)) with a glycodendric endfunctionality with eight glucose moieties was synthesised in four steps via a combination of esterification, thiol‐alkyne conjugation and hetero‐Diels–Alder (HDA) cycloaddition. A linear glycopolymer of similar size and composition was also synthesised in order to compare the protein binding characteristics of the polymer with glycodendritic endfunctionality to the linear glycol blockcopolymer. The two amphiphilic polymers were self‐assembled in water into micelles. These particles were then tested for their ability to bind to Concanavalin A (Con A). In a turbidity assay, the polymer glycodendron exhibited a significantly faster clustering rate to the lectin as compared to the linear glycopolymer. In a precipitation assay, it is found that significantly less glucose residue is required for binding per Con A for the polymer with the glycodendritic endfunctionality.
13.
14.
Till Gruendling Kim K. Oehlenschlaeger Elena Frick Mathias Glassner Christina Schmid Christopher Barner‐Kowollik 《Macromolecular rapid communications》2011,32(11):807-812
Shining a light on click chemistry: The use of UV‐radiation as trigger signal provides a facile means to obtain spatial and temporal control over polymer conjugation reactions in addition to providing a further means of achieving orthogonality in click transformations. In the current contribution, UV‐radiation was employed to induce a highly efficient Diels–Alder conjugation of polymeric building blocks via the photo‐induced in situ formation of highly reactive cis‐dienes from a 2‐methylbenzophenone precursor.
15.
Nikoletta Stavrouli Ilias Katsampas Sotirios Aggelopoulos Constantinos Tsitsilianis 《Macromolecular rapid communications》2008,29(2):130-135
A poly(methyl methacrylate)‐block‐poly(acrylic acid)‐block‐poly(2‐vinyl pyridine)‐block‐poly(acrylic acid)‐block‐poly(methyl methacrylate) (PMMA‐PAA‐P2VP‐PAA‐PMMA), pentablock terpolymer has been synthesized by anionic polymerization with sequential addition of monomers and studied in aqueous media at low pH. The system exhibits combined properties and adopts the behavior of ‘telechelic’ polyelectrolytes and that of double hydrophilic polyampholytes. This complex behavior leads to the pentablock terpolymer forming a pH and temperature sensitive reversible hydrogel at very low polymer concentration.
16.
Kamel Chougrani Jrome Deschamps Sylvain Dutremez Arie van der Lee Thierry Barisien Laurent Legrand Michel Schott Jean‐Sbastien Filhol Bruno Boury 《Macromolecular rapid communications》2008,29(7):580-586
Synthesis of a water‐soluble polydiacetylene has been achieved by topochemical polymerization in the solid state of the bis(N‐methylimidazolium)diacetylene monomer. Structural characterization for the monomer by X‐ray diffraction and NMR spectroscopy supports a photopolymerization initiated at the surface. Characterization of the polymer (NMR, UV and Raman spectroscopy, and dynamic light scattering) is given along with a molecular modelling interpretation of the polymerization in the solid state.
17.
Kang Tao Dairen Lu Ruke Bai Hongfei Li Lijia An 《Macromolecular rapid communications》2008,29(17):1477-1483
We have developed a novel strategy for the preparation of ion‐bonded supramolecular star polymers by RAFT polymerization. An ion‐bonded star supramolecule with six functional groups was prepared from a triphenylene derivative containing tertiary amino groups and trithiocarbonate carboxylic acid, and used as the RAFT agent in polymerizations of tert‐butyl acrylate (tBA) and styrene (St). Molecular weights and structures of the polymers were characterized by 1H NMR and GPC. The results show that the polymerization possesses the character of living free‐radical polymerization and the ion‐bonded supramolecular star polymers PSt, PtBA, and PSt‐b‐PtBA, with six well‐defined arms, were successfully synthesized.
18.
Dongwu Yuan Robert G Brown John D Hepworth Michael S Alexiou John H. P. Tyman 《Journal of heterocyclic chemistry》2008,45(2):397-404
The synthesis and characterisation of a series of novel 4‐acylamino and 4‐alkylamino‐N‐1,8‐naphthalimides is described. The UV‐visible absorption and emission properties of the compounds are reported. Significant solvent effects are noted for 4‐n‐butyl‐9‐n‐butyl‐1,8‐naphthylimide. The incorporation of acetyl and chloroacetyl groups into the 4‐substituent markedly increases the fluorescence quantum yield compared with 4‐alkylamino substituemnts. 相似文献
19.
Ravi Shankar Tushar K. Ghosh Richard J. Spontak 《Macromolecular rapid communications》2007,28(10):1142-1147
A dielectric elastomer derived from a polystyrene‐block‐poly(ethylene‐co‐butylene)‐block‐polystyrene triblock copolymer swollen with a midblock‐selective solvent is reported to show promise as a nanostructured organic actuator requiring no pre‐strain. This might provide an attractive alternative to conventional acrylic, siloxane, and polyurethane elastomers since the electromechanical properties are composition‐tunable.
20.
Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.