A Novel Type of Vesicles Based on Ionic and π–π Interactions

Electrostatic self‐assembly can be used to form supramolecular vesicles in aqueous solution. Vesicles consist of cationic G8 poly(amidoamine) dendrimers and the trivalent sulfonate dye Ar27. No classical amphiphiles are present but the interplay of electrostatics, π–π interaction and geometric factors influences the structure formation. Labeled guest molecules, both small molecules and peptides, can be included inside these vesicles and vesicles imaged by fluorescence techniques. The structure was studied by dynamic and static light scattering, small‐angle neutron scattering, confocal laser scanning microscopy, and fluorescence correlation spectroscopy. The study indicates the prospect of constructing functional nanoobjects by the self‐assembly of charged molecules in aqueous solution.

     

Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Addition‐Fragmentation Chain Transfer Involving Dimers of α‐Methylvinyl Monomers Studied by ESR Spectroscopy: Competition between Fragmentation and Bimolecular Termination

Detection of the adduct radical by ESR spectroscopy and after‐effect ESR measurements of the adduct radical concentrations in the photosensitized polymerization of styrene (St) in the presence of dimers of α‐methylstyrene (MSD) and methyl methacrylate have revealed that the dominant mechanism of adduct radical loss changes from bimolecular termination to fragmentation as the temperature is increased beyond 90 °C for St/MSD.

     

Preparation and Properties of New Soluble π‐Conjugated Polymers Containing a Fumaronitrile Unit in the Main Chain

Summary: A class of new, soluble, π‐conjugated polymers containing a fumaronitrile unit in the main chain were synthesized by the reaction between di(4‐bromophenyl)fumaronitrile and bis(2,2‐dimethylpropane‐1,3‐diyl)‐1,4‐dialkoxyphenylene‐2,5‐diborate employing palladium catalysts. All the polymers were photoluminescent and electrochemically active.

The new soluble π‐conjugated polymers 1a – d with photoluminescence and electrochemical activity synthesized here.     

The “Precursor Approach” to Patterned Fluorescence Images in Polymer Films

In contrast to the conventional two‐step method, which involves the generation of reactive functional groups followed by incubation in a dye solution (a wet developing process), the “precursor approach” enables the rapid and cost‐effective generation of patterned images in one step, without the need for an additional wet process. By using the “precursor approach”, the fluorescence of precursor molecules in polymer films can be effectively manipulated by: (1) photoinduced removal of transient protecting groups; (2) photoinduced protonation or intramolecular proton transfer; (3) photochromism; (4) photoinduced formation of fluorophores; (5) photoinduced oxidative degradation or molecular orientation.

     

Synthesis and Characterization of α,ω‐Heterofunctional Poly(ethylene oxide) Macromonomers

A novel α,ω‐heterofunctional poly(ethylene oxide) (PEO) macromonomer possessing methacryloyl and thienyl end groups was prepared by ring‐opening polymerization of ethylene oxide initiated by potassium thienylethoxide and termination of the living PEO ends with methacryloyl chloride. Incorporation of methacryloyl and thienyl groups was confirmed by free‐radical and oxidative polymerization processes, respectively, and by means of ¹H NMR analysis.

     

Microwave Accelerated Polymerization of 2‐Phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine: Kinetics and Influence of End‐Groups on Glass Transition Temperature

Summary: The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine (PhOZI) with methyl tosylate (MeOTs) and butyl iodide (BuI) as initiators were performed in refluxing butyronitrile. Reaction kinetics under microwave irradiation was compared with conventional oil bath heating. The polymerization rates, under microwave irradiation, showed an acceleration by a factor of 1.8 (independently from the used initiator). The investigation of the thermal properties of the obtained poly(N‐benzoyl‐trimethyleneimine) showed the influence of molecular weight and end‐groups on the glass transition temperature.

The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine performed in refluxing butyronitrile.     

A Composite Polymer Film with both Superhydrophobicity and Superoleophilicity

Summary: A composite film composed of porous polyurethane (PU) and polystyrene (PS) microspheres with both superhydrophobicity and superoleophilicity has been prepared. In this film, the dual‐scale structure enhances both the hydrophobicity and oleophilicity of the surface material. The composite film with such an ‘intelligent’ wettability property can be utilized to separate oil and water systems efficiently.

The composite film can be used to separate diesel oil and water.     

Poly(p‐phenylenevinylene) Derivatives with Defined Conjugation Segments and Post‐Polymerization Modification with Sterically Enshrouded Chromophores

Two poly(p‐phenylenevinylene) derivative alternating copolymers ( P1‐I and P2‐I ) have been prepared featuring iodo substituents and m‐phenylene units to periodically disrupt conjugation. P1‐I was derivatized with various chromophores to yield P1a‐f . In P1a‐f , the chromophores were positioned within a sterically protected pocket shielding them from interchain interactions so that intrachain interactions between polymer segments could be observed. Solution and film properties of polymers have been examined. Post‐polymerization chromophore modification leads to new photophysical properties such as intramolecular charge transfer and fluorescent resonance energy transfer processes in some cases.

     

Nano Grape Formation by isotactic‐Poly(methacrylic acid)‐block‐Poly(butyl acrylate)

A novel approach is employed to produce core–corona nanospheres, which introduces a stereoregular hydrophilic part to an amphiphilic block copolymer. The resultant morphology is reported using isotactic‐poly(methacrylic acid)‐block‐poly(butyl acrylate). Infrared spectroscopy revealed a supramolecular interaction, and X ray diffraction revealed the crystallization of the outer isotactic‐poly(methacrylic acid) part. The nanostructure, which looks like a nanosized ‘grape’, was formed when nanospheres and nanofibers coexisted simultaneously and partially fused.

     

Supramolecular Assembly of Gold Nanoparticles Mediated by Polypseudorotaxane with Thiolated β‐Cyclodextrin

Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.

A typical TEM image of gold nanoparticle aggregate 2 .     

Reversible Photocontrolled Swelling‐Shrinking Behavior of Micron Vesicles Self‐Assembled from Azopyridine‐Containing Diblock Copolymer

Poly(N‐isopropylacrylamide)‐block‐poly{6‐[4‐(4‐pyridyazo)phenoxy] hexylmethacrylate} (PNIPAM‐b‐PAzPy) was synthesized by successive reversible addition‐fragmentation chain transfer (RAFT) polymerization. In a water/tetrahydrofuran (H₂O/THF) mixture, amphiphilic PNIPAM‐b‐PAzPy self‐assembles into giant micro‐vesicles. Upon alternate ultraviolet (UV) and visible light irradiation, obvious reversible swelling‐shrinking of the vesicles was observed directly under an optical microscope. The maximum percentage increase in volume, caused by the UV light, reached 17%. Moreover, the swelling could be adjusted using the UV light power density. The derivation of this effect is due to photoinduced reversible isomerization of azopyridine units in the vesicles.

     

Highly Efficient and Well‐Controlled Ambient Temperature RAFT Polymerization under Solar Radiation

Highly efficient and well‐controlled ambient temperature reversible addition–fragmentation chain transfer (RAFT) polymerization is readily carried out under environmentally friendly mild solar radiation. This discovery has significantly extended studies from man‐made separated‐spectroscopic‐emission UV‐vis radiation (Macromolecules 2006 , 39, 3770) to natural continuous‐spectroscopic‐emission solar radiation for ambient temperature RAFT polymerization.

     

N‐(2‐Hydroxypropyl)methacrylamide (HPMA) Copolymer‐Linked Nitroxides: Potential Magnetic Resonance Contrast Agents

N‐(2‐Hydroxypropyl)methacrylamide (HPMA) copolymer‐linked nitroxides were synthesized as macromolecular contrast agents for MR imaging. Molar relaxivities of HPMA copolymer‐linked nitroxides increased linearly in proportion to the number of nitroxides attached per gram of copolymer. HPMA copolymer‐linked nitroxides with 15, 20 and 30 mol‐% nitroxide exhibited higher relaxivities than gadolinium diethylenetriaminepentaacetic acid (Gd‐DTPA). These results demonstrate the potential of HPMA copolymer‐linked nitroxides as MR contrast agents for solid tumors.

Structure of HPMA copolymer‐linked nitroxides.     

Uniform PEO Star Polymers Synthesized in Water via Free Radical Polymerization or Atom Transfer Radical Polymerization

Amphiphilic star shaped polymers with poly(ethylene oxide) (PEO) arms and cross‐linked hydrophobic core were synthesized in water via either conventional free radical polymerization (FRP) or atom transfer radical polymerization (ATRP) techniques using a simple “arm‐first” method. In FRP, PEO based macromonomers (MM) were used as arm precursors, which were then cross‐linked by divinylbenzene (DVB) using 2,2′‐azoisobutyronitrile (AIBN). Uniform star polymers ( < 1.2) were achieved through adjustment of the ratio of PEO MM, DVB, and AIBN. While in case of ATRP, both PEO MM, and PEO based macroinitiator (MI) were used as arm precursors with ethylene glycol diacrylate as cross‐linker. Even more uniform star polymers with less contamination by low MW polymers were obtained, as compared to the products synthesized by FRP.

     

Precision Synthesis of Poly(3‐hexylthiophene) from Catalyst‐Transfer Suzuki−Miyaura Coupling Polymerization

^tBu₃ PPd(Ph)Br ( 1 )‐catalyzed Suzuki‐Miyaura coupling polymerization of 2‐(4‐hexyl‐5‐iodo‐2‐thienyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane ( 2 ) was investigated. Monomer 2 was polymerized with 1 at 0 °C in the presence of CsF and 18‐crown‐6 in THF containing a small amount of water to yield P3HT with a narrow molecular weight distribution and almost perfect head‐to‐tail regioregularity. The values increased up to 11 400 g · mol⁻¹ in proportion to the feed ratio of 2 to 1 . The MALDI‐TOF mass spectra showed that P3HT with moderate molecular weight uniformly had a phenyl group at one end and a hydrogen atom at the other, indicating involvement of a catalyst‐transfer mechanism. Successive 1 ‐catalyzed polymerization of fluorene monomer 3 and then 2 yielded a well‐defined block copolymer of polyfluorene and P3HT.