Step‐Growth Radical Addition‐Coupling Polymerization (RACP) for Synthesis of Alternating Copolymers

We report a new type of step‐growth radical addition‐coupling polymerization (RACP) involving consecutive addition of carbon‐centered radical derived from α,α′‐dibromo dibasic ester to NO double bond of C‐nitroso compound followed by cross‐coupling of carbon‐centered radical and in situ formed nitroxyl radical, which produces alternating copolymers with high molecular weight and unimodal molecular weight distribution from saturated and unsaturated monomers.

     

Organometallic‐Mediated Alternating Radical Copolymerization of tert‐Butyl‐2‐Trifluoromethacrylate with Vinyl Acetate and Synthesis of Block Copolymers Thereof

Organometallic‐mediated radical polymerization (OMRP) has given access to well‐defined poly(vinyl acetate‐alt‐tert‐butyl‐2‐trifluoromethacrylate)‐b‐poly(vinyl acetate) and poly(VAc‐alt‐MAF‐TBE) copolymers composed of two electronically distinct monomers: vinyl acetate (VAc, donor, D) and tert‐butyl‐2‐trifluoromethacrylate (MAF‐TBE, acceptor, A), with low dispersity (≤1.24) and molar masses up to 57 000 g mol⁻¹. These copolymers have a precise 1:1 alternating structure over a wide range of comonomer feed compositions. The reactivity ratios are determined as r _VAc = 0.01 ± 0.01 and r _MAF‐TBE = 0 at 40 °C. Remarkably, from a feed containing >50% molar VAc content, poly(VAc‐alt‐MAF‐TBE)‐b‐PVAc block copolymers are produced via a one‐pot synthesis. Such diblock copolymers exhibit two glass transition temperatures attributed to the alternating and homopolymer sequences. The OMRP of this fluorine‐containing alternating monomer system may provide access to a wide range of new polymer materials.

     

Iron‐Promoted Practical One‐Pot Synthesis of 2,5‐Disubstituted Oxazoles

A practical one‐pot protocol for the synthesis of 2,5‐disubstituted oxazoles from 1‐aryl‐2‐nitroethanones was reported. In the presence of iron/AcOH in acetonitrile, the reaction of 1‐aryl‐2‐nitroethanones with trimethyl orthoacetate or trimethyl orthobenzoate delivered the corresponding 2,5‐disubstituted oxazoles in moderate to good yields.     

One‐Pot Synthesis of (−)‐Oseltamivir and Mechanistic Insights into the Organocatalyzed Michael Reaction

The one‐pot sequential synthesis of (?)‐oseltamivir has been achieved without evaporation or solvent exchange in 36 % yield over seven reactions. The key step was the asymmetric Michael reaction of pentan‐3‐yloxyacetaldehyde with (Z)‐N‐2‐nitroethenylacetamide, catalyzed by a diphenylprolinol silyl ether. The use of a bulky O‐silyl‐substituted diphenylprolinol catalyst, chlorobenzene as a solvent, and HCO₂H as an acid additive, were key to produce the first Michael adduct in both excellent yield and excellent diastereo‐ and enantioselectivity. Investigation into the effect of acid demonstrated that an acid additive accelerates not only the E–Z isomerization of the enamines derived from pentan‐3‐yloxyacetaldehyde with diphenylprolinol silyl ether, but also ring opening of the cyclobutane intermediate and the addition reaction of the enamine to (Z)‐N‐2‐nitroethenylacetamide. The transition‐state model for the Michael reaction of pentan‐3‐yloxyacetaldehyde with (Z)‐N‐2‐nitroethenylacetamide was proposed by consideration of the absolute configuration of the major and minor isomers of the Michael product with the results of the Michael reaction of pentan‐3‐yloxyacetaldehyde with phenylmaleimide and naphthoquinone.     

One‐Pot Synthesis of Hydrophobically Modified Iminosugar C‐Alkynylglycosides: Facile Synthesis of Polyhydroxy Tetrahydroindolizines

A mild and efficient one‐pot method has been developed for the stereoselective synthesis of structurally diverse novel iminosugar C‐alkynylglycosides. The generality of this methodology has been demonstrated with a wide variety of amines and copper acetylides. This one‐pot method has been exploited in the synthesis of new class of DNA cross‐linking agents, polyhydroxy 1‐vinyl‐tetrahydroindolizine derivatives.     

Biomolecular Assemblies Combining Two Orthogonal Copper‐Mediated Ligations in a One‐Pot Reaction

The access to multifunctional biomolecular compounds involves multistep reactions usually with a complicated protection scheme and lengthy separation processes. The development of a strategy combining several orthogonal ligations is highly desirable. Herein, we introduce a new method that involves two orthogonal copper‐mediated ligations of azide with alkyne, and amine with thioacid. We established compatible conditions to carry out molecular assemblies of three different chemical components in a single one‐pot reaction. The effectiveness of the method was demonstrated in the synthesis of biomolecular compounds that are known to target tumor tissue. The simple reaction conditions suggest that this strategy of combining several orthogonal ligations could have wide potential for the chemical synthesis of complex macromolecules.     

水相中一锅煮、四组份反应高效合成多取代嘧啶类化合物

此文报道了一种室温下,水相中由丙二睛,二硫化碳,卤代烃和烷基异硫脲四组份、一锅煮反应合成多取代嘧啶类化合物的方法。该方法具有高效、反应条件温和、操作简单、适用范围广和环境友好等优点。     

Synthesis of Functionalized 1‐Benzamido‐1,4‐dihydropyridines via a One‐Pot Two‐Step Four‐Component Reaction

The one‐pot four‐component reaction of benzohydrazide, acetylenedicarboxylate, aromatic aldehydes and malononitrile in ethanol with triethylamine as base catalyst afforded functionalized 1‐benzamido‐1,4‐dihydropyridines in satisfactory yields. Under similar conditions, picolinohydrazide or nicotinohydrazide can also be successfully utilized in the reactions to give corresponding functionalized 1,4‐dihydropyridines. ¹H NMR data indicated that an equilibrium of cis/trans‐conformations exist in 1‐benzamido‐1,4‐dihydropyridines.     

One‐Pot Template‐Free Synthesis of NaYF4 Upconversion Hollow Nanospheres for Bioimaging and Drug Delivery

Hollow‐structured nanomaterials with fluorescent properties are extremely attractive for image‐guided cancer therapy. In this paper, sub‐100 nm and hydrophilic NaYF₄ upconversion (UC) hollow nanospheres (HNSs) with multicolor UC luminescence and drug‐delivery properties were successfully prepared by a facile one‐pot template‐free hydrothermal route using polyetherimide (PEI) polymer as the stabilizing agent. XRD, SEM, TEM, and N₂‐adsorption/desorption were used to characterize the as‐obtained products. The growth mechanism of the HNSs has been systematically investigated on the basis of the Ostwald ripening. Under 980 nm excitation, UC emissions of HNSs can be tuned by a simple change of the concentration or combination of various upconverters. As a result, the PEI‐coated HNSs could be used as efficient probes for in vitro upconversion luminescence (UCL) cell imaging. Furthermore, a doxorubicin storage/release behavior and cancer‐cell‐killing ability investigation reveal that the product has the potential to be a drug carrier for cancer therapy.     

One‐Pot Protection‐Glycosylation Reactions for Synthesis of Lipid II Analogues

(2,6‐Dichloro‐4‐methoxyphenyl)(2,4‐dichlorophenyl)methyl trichloroacetimidate ( 3 ) and its polymer‐supported reagent 4 can be successfully applied to a one‐pot protection‐glycosylation reaction to form the disaccharide derivative 7 d for the synthesis of lipid II analogues. The temporary protecting group or linker at the C‐6 position and N‐Troc protecting group of 7 d can be cleaved simultaneously through a reductive condition. Overall yields of syntheses of lipid II ( 1 ) and neryl‐lipid II N^ε‐dansylthiourea are significantly improved by using the described methods.     

One‐Pot Preparation of Inert Well‐Defined Polymers by RAFT Polymerization and In Situ End Group Transformation

A one‐pot procedure that straightforwardly combines reversible addition‐fragmentation chain transfer (RAFT) polymerization and end group transformation to remove the RAFT end groups is developed for the synthesis of well‐defined poly(meth)acrylates and polyacrylamides with inert end groups. This procedure only requires the addition of an amine at the end of the standard RAFT polymerization procedure, which avoids the separation and purification of the intermediate polymers and, hence, extremely reduces the working time and utilized amount of solvents. Upon addition of the amine, a thiol group is formed by aminolysis of the thiocarbonylthio group, which subsequently undergoes Michael addition with unreacted monomer leading to an inert thioether functionalized polymer.

     

Gold Nanoparticles Supported on a Layered Double Hydroxide as Efficient Catalysts for the One‐Pot Synthesis of Flavones

Flavones are a class of natural products with diverse biological activities and have frequently been synthesized by step‐by‐step procedures using stoichiometric amounts of reagents. Herein, a catalytic one‐pot procedure for the synthesis of flavone and its derivatives is developed. In the presence of gold nanoparticles supported on a Mg‐Al layered double hydroxide (Au/LDH), various kinds of flavones can be synthesized starting from 2′‐hydroxyacetophenones and benzaldehydes (or benzyl alcohols). The present one‐pot procedure consists of a sequence of several reactions, and Au/LDH can catalyze all these different types of reactions. The catalysis is shown to be truly heterogeneous, and Au/LDH can be readily recovered and reused.     

Novel One‐Pot Three‐Component Reaction for the Synthesis of Functionalized Spiroquinazolinones

A wide variety of spiroquinazolinone derivatives have been synthesized via a one‐pot three‐component reaction of isatoic anhydride, cyclic ketones, and hydrazides in the presence of catalytic amount (20 mol%) of H₃PO₃ in ethanol. Mild reaction conditions, high atom economy, operational simplicity, and good to high yields are the key advantages of the present protocol.     

One‐Pot Synthesis of Pentasubstituted Cyclohexanes by a Michael Addition Followed by a Tandem Inter–Intra Double Henry Reaction

Michael, Henry, and Henry : A new one‐pot reaction of α,β‐unsaturated aldehydes and β‐dicarbonyls, which involves a Michael reaction catalyzed by diarylprolinol ethers and an inter–intramolecular Henry tandem reaction catalyzed by TBAF (see scheme), has been developed. The reaction proceeds in high enantio‐ and diastereoselectivity for a wide range of unsaturated aldehydes and β‐dicarbonyl reagents.

     

Tandem One‐pot Synthesis of Polysubstituted 1,3‐Thiazine Derivatives

A tandem one‐pot synthesis of polysubstituted 1,3‐thiazines has been developed by reacting with cyanoacetamide and isothiocyanate derivatives to give rise to 2‐cyano‐3‐mercaptoacrylamides, which are trapped in situ by various aldehydes or diversely substituted ketones through intermolecular cyclization, providing polysubstituted 1,3‐thiazine derivatives in short reaction times with good to excellent yields. The salient features of this novel protocol are operational simplicity, accessing the desired products from the readily available starting materials and easy of product isolation and may find wide spread applications in medicinal chemistry.     

Enantioselective Organocatalytic One‐Pot Amination/aza‐Michael/Aldol Condensation Reaction Sequence: Synthesis of 3‐Pyrrolines with a Quaternary Stereocenter

Primary amine‐catalyzed direct conversion of α,α‐disubstituted aldehydes into 3‐pyrrolines with a quaternary stereocenter is reported. The one‐pot enantioselective sequence is based on a α‐amination, an aza‐Michael addition of hydrazine, an aldol condensation dehydratation and proceeds with good yields and excellent levels of enantioselectivity. Synthetically attractive applications including the formation of aziridinopyrrolidine or epoxypyrrolidine derivatives with good yields and selectivities are also described.     

One‐Pot Synthesis of Multifunctional Polymers by Light‐Controlled Radical Polymerization and Enzymatic Catalysis with Candida antarctica Lipase B

The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.