The Ring Opening Metathesis Polymerisation Toolbox

Summary: The success of metathesis chemistry techniques has sparked a tremendous interest in polymer and material chemistry. This contribution provides an overview of the state of the art in ring opening metathesis polymerisation (ROMP). It is intended to provide the reader with useful information on the interplay of initiators, monomers, and reaction conditions, thus aiding polymer chemists to utilise the ROMP toolbox. Prominent and illustrative examples from current research are given in the article.

The “ROMP toolbox”.     

Self‐Assembly of Poly(2‐alkyl‐2‐oxazoline)s by Crystallization in Ethanol–Water Mixtures Below the Upper Critical Solution Temperature

Crystallization of poly(2‐isobutyl‐2‐oxazoline) and poly(2‐nonyl‐2‐oxazoline) is found to occur by room temperature annealing below the upper critical solution temperature in ethanol–water solvent mixtures. Both polymers produce similar self‐assembled structures (see image), resembling the previously reported crystalline hierarchical structures obtained from hot aqueous poly(2‐isopropyl‐2‐oxazoline) solutions above the lower critical solution temperature. These observations suggest that the crystallization induced self‐assembly process is a rather general phenomenon occurring for semicrystalline polymers in liquid–liquid two phase systems.

     

Phosphorylation of Cotton Cellulose with Baker's Yeast Hexokinase

Here we report for the first time on phosphorylation of cotton cellulose using baker's yeast hexokinase and phosphoryl donor adenosine‐5′‐triphosphate. An enzymatic assay was adopted for determination of the degree of phosphorylation of cellulose. This functional modification of cellulose resulted in improved colorability and flame resistance.

Phosphorylated glucopyranose unit of cellulose.     

Synthesis of Well‐defined Amphiphilic Block Copolymers by Organotellurium‐Mediated Living Radical Polymerization (TERP)

Low‐molecular weight amphiphilic diblock copolymers, polystyrene‐block‐poly (2‐vinylpyridine) (PS‐b‐P2VP), and (P2VP‐b‐PS) with different block ratios were synthesized for the first time via organotellurium‐mediated living radical polymerization (TERP). For both the homo‐ and block copolymerizations, good agreement between the theoretical, and experimental molecular weights was found with nearly 100% yield in every case. The molecular weight distribution for all the samples ranged between 1.10 and 1.24, which is well below the theoretical lower limit of 1.50 for a conventional free radical polymerization. Furthermore, a very simple approach to producing highly dense arrays of titania nanoparticles (TiO₂) is presented using a site‐selective reaction of titanium tetraisopropoxide within the P2VP domains of micellar film of P2VP‐b‐PS in toluene through the sol–gel method.

     

Facile Fabrication of Multistimuli‐Responsive Metallo‐Supramolecular Core Cross‐Linked Block Copolymer Micelles

Metallo‐supramolecular core cross‐linked (CCL) micelles are fabricated from terpyridine‐functionalized double hydrophilic block copolymers, poly(2‐(2‐methoxyethoxy)ethyl methacrylate)‐b‐poly(2‐(diethylamino)ethyl methacrylate‐co‐4′‐(6‐methacryloxyhexyloxy)‐2,2′:6′,2″‐terpyridine) [PMEO₂MA‐b‐P(DEA‐co‐TPHMA)] via the formation of bis(terpyridine)ruthenium(II) complexes. These metallo‐supramolecular CCL micelles exhibit not only high structural integrity under different pH values and temperatures in aqueous solution, but multistimuli responsiveness including pH‐responsive cores, thermo‐responsive shells, and reversible dissociation of bis(terpyridine)ruthenium(II) complexes upon addition of competitive metal ion chelator, which allows for precisely controlled release of the encapsulated hydrophobic guest molecules via the combination of different stimuli.

     

Polymer Brushes with Phototriggered and Phototunable Swelling and pH Response

Photolabile polymer brushes with tailored length containing a photoremovable protecting group (NVOC) are prepared via the SI‐ATRP method. Upon light irradiation, the NVOC group is removed to generate controlled densities of free amine groups (PAMA) randomly distributed along the brush. The presence of the ionizable groups induces a photo‐triggered swelling response. The swelling degree can be tuned by the irradiation dose. A dual (light and pH), tunable response is demonstrated.

     

High‐Molecular‐Weight Polycarbonates Synthesized by Enzymatic ROP of a Cyclic Carbonate as a Green Process

High‐molecular‐weight PTeMC and PHMC were prepared by the lipase‐catalyzed polymerization of butane‐1,4‐diol or hexane‐1,6‐diol and diphenyl carbonate via the formation of a cyclic dimer by a green process. Cyclic carbonate dimers were prepared by the lipase‐catalyzed condensation of diphenyl carbonate with butane‐1,4‐diol or hexane‐1,6‐diol in dilute toluene solution using an immobilized lipase from Candida antarctica, and was followed by the ring‐opening polymerization of the cyclic dimer in bulk with the same lipase to produce PTeMC with = 119 000 g · mol^?1 and PHMC with = 399 000 g · mol^?1, respectively. Additionally, enzymatic polymerization of cyclic carbonate dimer was analyzed with respect to the K_m and V_max for the lipase.

     

Hexyl‐Substituted Oligoselenophenes with Central Tetrafluorophenylene Units: Synthesis,Characterisation and Application in Organic Field Effect Transistors

A series of selenophene oligomers incorporating conjugated fluorinated phenylene units have been synthesised as potential semiconductor materials for organic field‐effect transistors (OFETs). X‐ray crystallography shows that the molecules are held in close proximity by several short intermolecular contacts, making them ideal candidates for OFET applications.

     

Self‐Healing in Tough Graphene Oxide Composite Hydrogels

Polymer hydrogels that are capable of spontaneously healing injury are being developed at a rapid pace because of their great potential in biomedical applications. Here, the self‐healing property of tough graphene nanocomposite hydrogels fabricated by using graphene peroxide as polyfunctional initiating and cross‐linking centers is reported. The hydrogels show excellent self‐healing ability at ambient temperature or even lower temperatures for a short time and very high recovery degrees (up to 88% tensile strength) can be achieved at a prolonged healing time. The healed gels exhibit very high tensile strengths (up to 0.35 MPa) and extremely high elongations (up to 4900%). The strong interactions between the polyacrylamide chains and the graphene oxide sheets are essential to the mechanical strengths of the healed gels.

     

Anionic Polysaccharides as Templates for the Synthesis of Conducting Polyaniline and as Structural Matrix for Conducting Biocomposites

A green chemoenzymatic pathway for the synthesis of conducting polyaniline (PANI) composites is presented. Laccase‐catalyzed polymerization in combination with anionic polysaccharides is used to produce polysaccharide/PANI composites, which can be processed into flexible films or coated onto cellulose surfaces. Different polysaccharide templates are assessed, including κ‐carrageenan, native spruce O‐acetyl galactoglucomannan (GGM), and TEMPO‐oxidized cellulose and GGM. The resulted conducting biocomposites derived from natural materials provide a broad range of potential applications, such as in biosensors, electronic devices, and tissue engineering.

     

Design Criteria for Accurate Measurement of Bimolecular Radical Termination Rate Coefficients via the RAFT‐CLD‐T Method

The reversible addition‐fragmentation chain transfer chain length dependent termination (RAFT‐CLD‐T) technique allows a simple experimental approach to obtain chain‐length‐dependent termination rate coefficients as a function of conversion, k(x). This work provides a set of criteria by which accurate k(x) can be obtained using the RAFT‐CLD‐T method. Visualization of three‐dimensional plots varying all kinetic rate parameters and starting concentrations demonstrates that only certain combinations give an accurate extraction of k(x). The current study provides hands‐on guidelines for experimentalists applying the RAFT‐CLD‐T method.

     

Assembly of Anionic Conjugated Polymer with 6‐O‐Modified PNP‐β‐Galactoside for Fluorescence Logic‐signal‐based Multiplex Detections of Enzymes

Anionic conjugated polymer (PFP‐SO) was assembled with a novel enzymatic substrate 6‐O‐modified PNP‐β‐galactoside ( 1 ) for sensitive multiplex enzyme detections. The PFP‐SO/ 1 /lipase/β‐galactosidase system has two chemical input signals which are Input 1 (lipase) and Input 2 (β‐galactosidase), and output optical signals such as fluorescence emission at 416 nm or 450 nm. Four types of logic gates, including YES, INH, NAND and AND, were successfully constructed and utilized for multiplex detections of lipase and β‐galactosidase in one tube.

     

Microphase Separation of Phenylene Oligomers with Polymeric Side Chains: A Dissipative Particle Dynamics Study

The microphase‐separated morphologies of p‐phenylene oligomers with POx, PCL, PS, and PEO side chains are studied using DPD simulations. It is shown that the microphase‐separated morphologies depend significantly on the degree of chemical incompatibility between the components as indicated by the Flory‐Huggins interaction parameters. The good agreement of the microphase separated morphologies as simulated by DPD with the experimentally determined thin film morphologies suggests that DPD can produce convincing morphological information at the nanoscale. The results show that grafting of polymeric side chains can be an important tool to control the morphology of polymers with a rigid backbone.

     

Monte Carlo Simulation of Randomly Branched Step‐Growth Polymers: Generation and Analysis of Representative Molecular Ensembles

A Monte Carlo simulation procedure has been set up and applied to generate representative ensembles of randomly branched step‐growth polymers based on their reaction recipe. The molecular distributions thus obtained are consistent with those from statistical/analytical approaches. However, because the current method gives access to the complete ensemble of simulated molecules, a very detailed structural analysis is possible. Our procedures are applicable to any ‘A_fB_g’ system with f + g ≥ 1. We apply this approach to randomly branched polyamides in order to gain insight into their molecular structure and understand the effect of the reaction recipe on the final product.

     

1,1‐Diphenyl Ethylene‐Mediated Radical Polymerisation: A General Non‐Metal‐Based Technique For The Synthesis Of Precise Core Cross‐Linked Star Polymers

This communication details the successful synthesis of low polydispersity core cross‐linked star (CCS) polymers via DPE‐mediated polymerisation. We demonstrate the ability to produce poly(methyl methacrylate) and poly(acrylonitrile) CCS polymers that are currently inaccessible via the two most common non‐metal‐based controlled radical polymerisation techniques (NMP and RAFT polymerisations).

     

Crystal Orientation Behavior of a Poly(vinylidene fluoride)/Nylon 11 Blend

The oriented crystallization of poly(vinylidene fluoride) (PVDF) in stretched films of a PVDF/nylon 11 blend was investigated. At low crystallization temperature the c‐axis of the PVDF α‐form was oriented to the orientation axis of the nylon 11 matrix, but c‐axis orientation gradually changed to a‐axis orientation upon increasing the crystallization temperature. Under all crystallization conditions studied, considerable amounts of PVDF in its β‐form with c‐axis orientation were produced as well.

Phase morphology of a stretched film of PVDF/nylon 11 blend observed with confocal laser scanning microscopy.     

In situ Localization of Molecules in Crosslinked Particles during Electrohydrodynamic Process: Simple Route to Produce Microcapsules and Fibers with Controlled Release

This study reports a spontaneous selective localization of molecules in crosslinked particles during electrospraying and electrospinning polymer solutions containing the particles. It provides a facile way of preparing microcapsules and fibers with controlled release. The dye molecules were phase separated from the crystalline polymer matrix during the electrohydrodynamic process and moved to the solvent‐rich crosslinked particles. The position of the particles in the microcapsules and fibers could be controlled by adjusting compatibility of the particles with the matrix polymer. The microcapsules and fibers did not show the initial burst release of the molecules and gave considerably prolonged release behavior.

     

Single‐Chain‐Particles of Poly(N‐isopropylacrylamide)

Spherical single‐chain‐particles of poly(N‐isopropylacrylamide) were prepared in aqueous solution above the lower critical solution temperature upon the addition of sodium dodecyl sulfate. The size of the single‐chain‐particles was investigated by means of transmission electron microscopy and viscosity measurements of the corresponding solutions, indicating the absence of inter‐chain entanglements among the single‐chain‐particles.

Schematic of the preparation of PNIPAM single‐chain‐globules in solution.     

Self‐Consistent Field Modeling of Three‐Dimensional Morphologies of Branched Lipid Surfactant at Air‐Water Interface

Three‐dimensional mesoscopic morphologies and the thermodynamics of structural phase transitions of amphiphilic lipids at air‐water interfaces are studied using self‐consistent field theory. Changing the relative amount of lipids in the system led to a series of 3D morphologic phases with varying average interfacial area per molecule, mimicking a compression of the model membranes. Membranes of both saturated and unsaturated lipids undergo a transition from cylindrical micelle to lamella when the lipid content in the system increases from 2% to about 19–20%. With further increase in the lipid content, saturated lipids first develop non‐uniform quasi‐2D distributions in the lamella and then gradually transform into a hybrid morphology containing quasi‐planar lamellae. In contrast, unsaturated lipids develop reverse‐micellar morphologies.

     

Transparent Nonlinear Optical Polymers for All‐Optical Wavelength Converters in Optical Fiber Communications

After synthesizing two chromophores with imine, we prepared acrylic nonlinear optical (NLO) polymers that contained the chromophores for all‐optical wavelength converters in optical fiber communication. The polymers show high d₃₃, 35 pm · V⁻¹, at 1.55 μm (pumping beam), considering their low losses, −3.0 dB · cm⁻¹, at a wavelength of 0.785 μm (near second harmonic signal beam of the pumping beam). This result means that the polymers are good candidates for wavelength converters of an approximately 1.55 μm signal beam.

UV‐vis spectra of NLO chromophores and polymers.