Worm‐like aggregates with a PAA/P4VP complex core and a PEG/PNIPAM mixed shell were prepared in ethanol by the comicellization of poly(ethylene glycol)‐block‐poly(acrylic acid) (PEG‐b‐PAA) and poly(N‐isopropylacrylamide)‐block‐poly(4‐vinylpyridine) (PNIPAM‐b‐P4VP) through hydrogen‐bonding. The formed aggregates were studied by dynamic light scattering, static light scattering, 1H NMR, and transmission electron microscopy. The length of worm‐like aggregates could be adjusted by changing the weight ratio of W(PNIPAM‐b‐P4VP)/W(PEG‐b‐PAA). When the ratio changed from 20 to 150%, the length changed from about 100 nm to several microns, and the diameter stayed almost unchanged at about 15 nm.
Two novel spiro‐configured ter(arylene‐ethynylene) derivatives, TSF‐Cz and TSF‐F , have been designed and synthesized using spiro(fluorene‐9,9′‐xanthene) (SFX) as building blocks, introducing a hole‐transporting carbazole and a fluorene chromophore as the peripheral functional group into the backbone through an oxygen atom. The two well‐defined oligomers possess good solubility, film‐forming quality, and high Tg's at 140 and 126 °C, respectively. In addition, these oligomers exhibit blue photoluminescence (PL) emission both in solution and solid states. The double‐layered devices fabricated using the two materials as the emitter show a sky‐blue emission with a brightness and a current efficiency of 7 613 cd · m−2 and 1.11 cd · A−1 for TSF‐Cz , and 1 507 cd · m−2 and 0.36 cd · A−1 for TSF‐F , respectively.
Summary: An O‐hexyl‐3,5‐bis(terpyridine)phenol ligand has been synthesized and transformed into a hexagonal Zn(II)‐metallomacrocycle by a facile self‐assembly procedure capitalizing on terpyridine‐Zn(II)‐terpyridine connectivity. The structural composition was confirmed by NMR and mass spectral techniques; photo‐ and electroluminescence properties were also investigated. The OLED device shows green electroluminescent emission at 515 nm with a maximum luminance of 39 cd · m−2 and maximum efficiency of 0.16 cd · A−1.
Structure and electroluminescent properties of the metallomacrocycle investigated. 相似文献
The crossover from small‐molecule to polymer behavior in realistic models of PI at temperatures well above the glass transition is investigated by means of MD simulations. The molar masses range from the monomer to = 6 800 g · mol−1 which is far from the critical value for entanglement in PI. It is shown that at this temperature the non‐Gaussian parameter almost vanishes in the Q‐range studied. This implies Gaussian behavior in almost all the Q‐range. From the mean square displacement and the incoherent scattering function behavior a smooth transition from the microscopic regime to the Rouse dynamics is observed. The Rouse behavior is achieved at chain molecular weights of about 1 000 g · mol−1, which corresponds to 14 monomer units.
Summary: An enzymatic one‐pot procedure has been developed for the synthesis of difunctional polyesters containing terminal thiols and acrylates. Candida antarctica lipase B was used as a catalyst for the ring‐opening polymerization of ω‐pentadecalactone. The polymerization was initiated with 6‐mercaptohexanol, then terminated with γ‐thiobutyrolactone or vinyl acrylate to create two types of difunctional polyesters with a very high content of thiol‐thiol or thiol‐acrylate end‐groups.
A new anhydroribotrisaccharide monomer, A2B3LR ( 1 ), was synthesized and ROP was carried out to elucidate the polymerizability and to obtain oligosaccharide‐branched polysaccharides with defined structures. The new trisaccharide monomer was found to be polymerized readily with BF3 · OEt2 as a catalyst at ?40 °C to give a lactose‐branched polymer. Copolymerization with ADBR gave the corresponding copolymers in good yields. After removal of protective benzyl groups, D ‐lactose‐branched ribofuranans with free hydroxyl groups were obtained in good yields. The structure of polymers was analyzed by 1H, 13C, and two‐dimensional NMR measurements, suggesting that D ‐lactose‐branched ribofuranans had (1 → 5)‐α stereoregularity.
The free volume in thin films of poly(N‐isopropylacrylamid) end‐capped with n‐butyltriocarbonate (nbc‐PNIPAM) is probed with positron annihilation lifetime spectroscopy (PALS). The PALS measurements are performed as function of energy to obtain depth profiles of the free volume of nbc‐PNIPAM films. The range of nbc‐PNIPAM films with thicknesses from 40 to 200 nm is focused. With decreasing film thickness the free volume increases in good agreement with an increase in the maximum swelling capability of the nbc‐PNIPAM films. Thus in thin hydrogel films the sorption and swelling behavior is governed by free volume.
Summary: Poly(D ,L ‐lactide) with a molar mass of 105 g · mol−1 and a yield over 90% was produced in 10 min by the ring‐opening polymerization of D ,L ‐lactide under microwave irradiation with forward power of 255 W. A degradation of the poly(D ,L ‐lactide) was also induced by microwaves with a power level over 340 W. The molar mass of poly(D ,L ‐lactide) was dependent upon the competition between the polymerization of D ,L ‐lactide and the degradation of the resulting polymer.
Profiles of molar mass versus microwave irradiation time (1.8 g DLLA, 0.1% Sn(Oct)2). 相似文献
Near‐infrared (NIR) polymer light‐emitting diodes (PLEDs) based on a fluorene–dioctyloxyphenylene wide‐gap host material copolymerized with a low‐gap emitter are presented. Various loadings (1, 2.5, 10, 20 mol%) of the low‐gap emitter are studied, with higher loadings leading to decreased efficiencies likely due to aggregation effects. While the 10 mol% loading resulted in almost pure NIR emission (>99.6%), the 1 mol% loading yielded optimum device performance, which is among the best reported to date for a unblended single‐layer pure polymer emitter, with an external quantum efficiencies of 0.04% emitting at 909 nm. The high spectral purity of the PLEDs combined with their performance support the methodology of copolymerization as an effective strategy for developing NIR PLEDs.
Two new “H” type of indole‐based chromophores were designed and successfully introduced to the polymeric system, the resultant polymers demonstrated enhanced NLO effects, good processability, thermal stability and nearly excellent transparency, indicating the advantages of “H” type chromophore moieties. And they could be promising candidates for the practical applications as new photonic materials.
A new targeted delivery system was developed in this paper by depositing magnetic NPs on protein containers which were prepared by sonicating oil in a protein solution. The deposition was conducted by layer‐by‐layer technique and monitored by zeta potential measurement. Such prepared samples can be targeted delivery in an external magnetic field. The hydrophobic dye TPP, as a model of drug, was loaded in the containers by dissolution in the oil phase before sonication. The containers loaded with dye are stable and can sustain the deposition treatment without loss of dye due to the protection of protein nanoshells.
A synthetic model glycoprotein was successfully synthesized using gelatin and mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin which were reacted under microwave conditions in basic media. The resulting glycoprotein is observed to form intermolecular inclusion complexes through complexation of the aromatic moieties along the polymer chain by the attached cyclodextrins. This phenomenon was analyzed and proven by 2D NMR spectroscopy (ROESY) and dynamic light scattering (DLS). Above the denaturation temperature, a strong increase of the hydrodynamic diameter was found due to enhanced supramolecular agglomeration. Such a novel glycoprotein with supramolecular self‐recognition would be promising in biomedical applications serving as a drug‐delivery basis polymer.
A series of novel, linear, soluble, high‐molecular‐weight, fluorinated aromatic polymers has been obtained for the first time using a superacid‐catalyzed polyhydroxyalkylation reaction of fluorinated carbonyl‐containing compounds: 1,1,1,‐trifluoroacetone ( 1 ), 2,2,2‐trifluoroacetophenone ( 2 ), 2,3,4,5,6,‐pentafluorobenzaldehyde ( 3 ), and octafluoroacetophenone ( 4 ) with aromatic hydrocarbons such as biphenyl ( a ), phenyl ether ( b ), terphenyl ( c ), and 4,4′‐diphenoxybenzophenone ( d ). These Friedel‐Crafts‐type aromatic electrophilic substitution reactions are performed at room temperature in trifluoromethane sulfonic acid or in its mixtures with dichloromethane. The polymers obtained are soluble in common organic solvents, and colorless transparent films could be cast from the solutions. 1H and 13C NMR analyses of the polymers synthesized reveal their linear, highly regular structure. The polymers also possess high thermostability.
A dielectric elastomer derived from a polystyrene‐block‐poly(ethylene‐co‐butylene)‐block‐polystyrene triblock copolymer swollen with a midblock‐selective solvent is reported to show promise as a nanostructured organic actuator requiring no pre‐strain. This might provide an attractive alternative to conventional acrylic, siloxane, and polyurethane elastomers since the electromechanical properties are composition‐tunable.
High molecular weight poly(9,10‐bis(p‐(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene) (2,6‐PAV) was synthesized with 2,6‐dimethylanthraquinone as a key intermediate. The as‐synthesized polymer is readily soluble in common organic solvents and can be used for spin‐coating. The as‐synthesized polymer exhibits a broad absorption band ranging from 280 to 520 nm and a bluish green emission band with a peak at 500 nm. The polymer shows good thermal stability, and no distinct glass transition is observed. A simple device with the configuration ITO/PEDOT:PSS/2,6‐PAV/Ba/Al showed a turn‐on voltage of 4.8 V and a maximal brightness of 340 cd · m−2.
Mussel adhesives function as tools for surface modifications of a wide variety of materials due to their remarkable adhesion properties. Herein, a combination of bioinspired mussel adhesives based on a dopamine derivative, polymer chemistry, and well‐established Diels–Alder (DA) chemistry leads to a bioinspired switchable surface system that possesses the capability of attaching and detaching specific polymers on demand. A dopaminemaleimide compound, which has been attached to a gold surface under maritime conditions undergoes DA‐ and retro‐DA‐click‐conjugations with cyclopentadiene‐carrying PEG chains. The surface attachment and the subsequent DA/rDA cycles are evidenced via XPS analysis.
Using two‐photon absorption, an array of spots in a dye‐doped polymer film can be bleached, creating a three‐dimensional structure that can be imaged with two‐photon or confocal microscopy. Microscopic deformations resulting from various treatments to the film can be characterized, for example, swelling or shrinking. This technique is demonstrated on dye‐doped poly(vinyl alcohol), in which the effect of swelling with the addition of water to the film is shown.
A triblock amphiphilic macrocycle consisting of a macrocyclic aromatic segment, a hydrophilic oligo(ethylene oxide) branch, and a hydrophobic alkyl dendron is successfully synthesized and characterized. The resulting cyclic amphiphile is observed to self‐assemble into hollow double‐layered capsules in aqueous solution, as confirmed by dynamic light scattering and cryogenic transmission electron microscopy investigations. The capsules are able to encapsulate hydrophobic guest molecules through aromatic interactions with high stability.
A water‐soluble, sulfur‐containing fluorescent conjugated polymer exhibits a visible fluorescence color change for detection of mercury in the presence of thymine. A new concept provides the design of a sensor ensemble using a simple combination method. This strategy avoids the need for complicated design and synthesis of a recognition group, eliminating the tedious synthetic efforts for the preparation of a sensor material.
Summary: In this paper, PEDOT/PSS‐ZnO coaxial nanocables with diverse inner core sizes are prepared by a new and facile method that involves two‐steps: the synthesis of ZnO nanoparticles through a sol‐gel process, followed by dewetting‐controlled self‐assembly of the nanoparticles and charged polymers to generate a cable‐like nanostructure with the aid of a vacuum. The nanocables have an outer diameter of ca. 100 nm with a polycrystalline ZnO inner core of 7–25 nm in diameter. The length and morphology of the nanocables are determined by external vacuum conditions as well as the ZnO concentration in the composite. A photoluminescence study shows an enhanced green light emission arising from ZnO with a size‐dependence feature.
TEM image of a PEDOT/PSS‐ZnO nanocable at high magnification. 相似文献
