Metallodendritic Grafted Core–Shell γ‐Fe2O3 Nanoparticles Used as Recoverable Catalysts in Suzuki C?C Coupling Reactions

The use of dendritic structures for the grafting of core–shell γ‐Fe₂O₃/polymer 300 nm superparamagnetic nanoparticles (MNPs) has been performed with four metallodendrons that were functionalized with diphosphinopalladium complexes. The catalytic performance of these nanocatalysts was optimized for the Suzuki C? C cross‐coupling reaction. These results demonstrated the importance of optimizing the catalytic efficiency of grafted MNPs by optimizing the dendritic structures and the nature of the peripheral phosphine ligands. All of these nanocatalysts showed remarkable reactivity towards bromoarenes and they were recovered and efficiently reused by magnetic separation with almost no loss of reactivity, even after 25 cycles.     

Methods for the surface functionalization of γ‐Fe2O3 nanoparticles with initiators for atom transfer radical polymerization and the formation of core–shell inorganic–polymer structures

Carboxylic acid capped γ‐Fe₂O₃ nanoparticles were prepared by the standard decomposition of Fe(CO)₅ in di‐n‐octyl ether and oleic acid. Two methods were employed to introduce surface functionality to the nanoparticles. First, a thermally stable, tert‐butyldiphenylsilyl‐protected hydroxyl group was incorporated into the carboxylic acid surfactant used during the synthesis. Subsequent deprotection and transformation installed a 2‐bromopropionyl ester group on the particle surface (the functional‐group‐interchange method). The resulting nanoparticles were 4.53 nm in average diameter and were characterized with IR spectroscopy, transmission electron microscopy (TEM), selected area electron diffraction, and elemental analysis. Second, a 2‐bromopropionyl ester group was installed on the particle surface after synthesis via the exchange of the surface oleic acid with a carboxylic acid containing the desired 2‐bromopropionyl ester unit (the ligand‐exchange method). The resulting nanoparticles were 4.30 nm in average diameter and were characterized with IR spectroscopy, TEM, and elemental analysis. Monitoring the percentage of bromine incorporated into the nanoparticle sample versus the ligand‐exchange reaction time indicated that the number of initiator‐containing carboxylic acids that could be exchanged onto the surface was limited, presumably by the steric size of the 2‐bromopropionyl ester group. Styrene was then polymerized directly off γ‐Fe₂O₃ nanoparticles, and this yielded hybrid core–shell structures. The measurements of the magnetic properties of the samples demonstrated that the magnetism of the core γ‐Fe₂O₃ nanoparticle did not change during the performance of the chemical transformations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3675–3688, 2005     

Polystyrene‐Core–Silica‐Shell Hybrid Particles Containing Gold and Magnetic Nanoparticles

Polystyrene‐core–silica‐shell hybrid particles were synthesized by combining the self‐assembly of nanoparticles and the polymer with a silica coating strategy. The core–shell hybrid particles are composed of gold‐nanoparticle‐decorated polystyrene (PS‐AuNP) colloids as the core and silica particles as the shell. PS‐AuNP colloids were generated by the self‐assembly of the PS‐grafted AuNPs. The silica coating improved the thermal stability and dispersibility of the AuNPs. By removing the “free” PS of the core, hollow particles with a hydrophobic cage having a AuNP corona and an inert silica shell were obtained. Also, Fe₃O₄ nanoparticles were encapsulated in the core, which resulted in magnetic core–shell hybrid particles by the same strategy. These particles have potential applications in biomolecular separation and high‐temperature catalysis and as nanoreactors.     

Magnetic Anisotropy of Cyanide‐Bridged Core and Core–Shell Coordination Nanoparticles Probed by X‐ray Magnetic Circular Dichroism

The local symmetry and local magnetic properties of 6 nm‐sized, bimetallic, cyanide‐bridged CsNiCr(CN)₆ coordination nanoparticles 1 and 8 nm‐sized, trimetallic, CsNiCr(CN)₆@CsCoCr(CN)₆ core–shell nanoparticles 2 were studied by X‐ray absorption spectroscopy (XAS) and X‐ray magnetic circular dichroism (XMCD). The measurements were performed at the Ni^II, Co^II, and Cr^III L_2,3 edges. This study revealed the presence of distorted Ni^II sites located on the particle surface of 1 that account for the uniaxial magnetic anisotropy observed by SQUID measurements. For the core–shell particles, a combination of the exchange anisotropy between the core and the shell and the pronounced anisotropy of the Co^II ions is the origin of the large increase in coercive field from 120 to 890 Oe on going from 1 to 2 . In addition, XMCD allows the relative orientation of the magnetic moments throughout the core–shell particles to be determined. While for the bimetallic particles of 1 , alignment of the magnetic moments of Cr^III ions with those of Ni^II ions leads to uniform magnetization, in the core–shell particles 2 the magnetic moments of the isotropic Cr^III follow those of Co^II ions in the shell and those of Ni^II ions in the core, and this leads to nonuniform magnetization in the whole nanoobject, mainly due to the large difference in local anisotropy between the Co^II ions belonging to the surface and the Ni^II ions in the core.     

Biomimetic Mussel Adhesive Inspired Clickable Anchors Applied to the Functionalization of Fe3O4 Nanoparticles

The functionalization of magnetite (Fe₃O₄) nanoparticles with dopamine‐derived clickable biomimetic anchors is reported. Herein, an alkyne‐modified catechol‐derivative is employed as the anchor, as i) the catechol‐functional anchor groups possess irreversible covalent binding affinity to Fe₃O₄ nanoparticles, and ii) the alkyne terminus enables further functionalization of the nanoparticles by the grafting‐onto approach with various possibilities offered by ‘click’ chemistry. In the present work, azido‐end group functionalized Rhodamine and poly(ethylene glycol) (PEG) are utilized to coat the iron oxide nanoparticles to make them fluorescent and water soluble.

     

Engineering the Mesopores of Fe3O4@Mesosilica Core–Shell Nanospheres through a Solvothermal Post‐Treatment Method

A solvothermal post‐treatment method was developed to synthesize Fe₃O₄@mesosilica core–shell nanospheres (CSNs) with a well‐preserved morphology, mesoporous structure, and tunable large pore diameters (2.5–17.6 nm) for the first time. N,N‐Dimethylhexadecylamine (DMHA), which was generated in situ during the heat‐treatment process, was mainly responsible for this pore‐size enlargement, as characterized by NMR spectroscopy. This pore‐size expansion can be strengthened with the aid of hexamethyldisilazane (HMDS), whilst the nature of the surface of the Fe₃O₄@mesosilica CSNs can be easily modified with trimethylsilyl groups during the pore‐size‐expansion process. The hydrophobicity of the Fe₃O₄@mesosilica CSNs increased for the enlarged mesopores and the adsorption capacity of these CSNs for benzene (up to 1.5 g g^?1) is the highest ever reported for Fe₃O₄@mesosilica CSNs. The resultant Fe₃O₄@mesosilica CSNs (pore size: 10 nm) showed a 3.6‐times higher adsorption capacity of lysozyme than those without the pore expansion (pore size: 2.5 nm), thus making them a good candidate for loading large molecules.     

Synthesis of magnetic,reactive, and thermoresponsive Fe3O4 nanoparticles via surface‐initiated RAFT copolymerization of N‐isopropylacrylamide and acrolein

A reversible addition‐fragmentation chain transfer (RAFT) agent was directly anchored onto Fe₃O₄ nanoparticles in a simple procedure using a ligand exchange reaction of S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetic acid)trithiocarbonate with oleic acid initially present on the surface of pristine Fe₃O₄ nanoparticles. The RAFT agent‐functionalized Fe₃O₄ nanoparticles were then used for the surface‐initiated RAFT copolymerization of N‐isopropylacrylamide and acrolein to fabricate structurally well‐defined hybrid nanoparticles with reactive and thermoresponsive poly(N‐isopropylacrylamide‐co‐acrolein) shell and magnetic Fe₃O₄ core. Evidence of a well‐controlled surface‐initiated RAFT copolymerization was gained from a linear increase of number‐average molecular weight with overall monomer conversions and relatively narrow molecular weight distributions of the copolymers grown from the nanoparticles. The resulting novel magnetic, reactive, and thermoresponsive core‐shell nanoparticles exhibited temperature‐trigged magnetic separation behavior and high ability to immobilize model protein BSA. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 542–550, 2010     

Incorporation of Fe3O4 Nanoparticles into Organometallic Coordination Polymers by Nanoparticle Surface Modification

Surface‐modified Fe ₃ O ₄ nanoparticles (NPs) can be obtained by substituting [(η⁵‐semiquinone)Mn(CO)₃] for oleylamine surface protecting groups. The resulting NP can function as a nucleus or template to generate crystalline coordination polymers that contain superparamagnetic Fe₃O₄ NPs. Hybridized magnetic properties can be obtained by introducing paramagnetic metal nodes, such as Mn²⁺, into the polymers (see picture).

     

Controlled Synthesis of Fe3O4/ZIF‐8 Nanoparticles for Magnetically Separable Nanocatalysts

Fe₃O₄/ZIF‐8 nanoparticles were synthesized through a room‐temperature reaction between 2‐methylimidazolate and zinc nitrate in the presence of Fe₃O₄ nanocrystals. The particle size, surface charge, and magnetic loading can be conveniently controlled by the dosage of Zn(NO₃)₂ and Fe₃O₄ nanocrystals. The as‐prepared particles show both good thermal stability (stable to 550 °C) and large surface area (1174 m²g^?1). The nanoparticles also have a superparamagnetic response, so that they can strongly respond to an external field during magnetic separation and disperse back into the solution after withdrawal of the magnetic field. For the Knoevenagel reaction, which is catalyzed by alkaline active sites on external surface of catalyst, small Fe₃O₄/ZIF‐8 nanoparticles show a higher catalytic activity. At the same time, the nanocatalysts can be continuously used in multiple catalytic reactions through magnetic separation, activation, and redispersion with little loss of activity.     

Boronic Acid Functionalized Core–Shell Polymer Nanoparticles Prepared by Distillation Precipitation Polymerization for Glycopeptide Enrichment

The boronic acid‐functionalized core–shell polymer nanoparticles, poly(N,N‐methylenebisacrylamide‐co‐methacrylic acid)@4‐vinylphenylboronic acid (poly(MBA‐co‐MAA)@VPBA), were successfully synthesized for enriching glycosylated peptides. Such nanoparticles were composed of a hydrophilic polymer core prepared by distillation precipitation polymerization (DPP) and a boronic acid‐functionalized shell designed for capturing glycopeptides. Owing to the relatively large amount of residual vinyl groups introduced by DPP on the core surface, the VPBA monomer was coated with high efficiency, working as the shell. Moreover, the overall polymerization route, especially the use of DPP, made the synthesis of nanoparticles facile and time‐saving. With the poly(MBA‐co‐MAA)@VPBA nanoparticles, 18 glycopeptides from horseradish peroxidase (HRP) digest were captured and identified by MALDI‐TOF mass spectrometric analysis, relative to eight glycopeptides enriched by using commercially available meta‐aminophenylboronic acid agarose under the same conditions. When the concentration of the HRP digest was decreased to as low as 5 nmol, glycopeptides could still be selectively isolated by the prepared nanoparticles. Our results demonstrated that the synthetic poly(MBA‐co‐MAA)@VPBA nanoparticles might be a promising selective enrichment material for glycoproteome analysis.     

Binding and Sulfonation of Poly(acrylic acid) on Iron Oxide Nanoparticles: a Novel,Magnetic, Strong Acid Cation Nano‐Adsorbent

Summary: A novel, magnetic, strong acid cation nano‐adsorbent has been developed by the covalent binding of poly(acrylic acid) on the surface of Fe₃O₄ nanoparticles followed by sulfonation using sulfanilic acid via carbodiimide activation. The nano‐absorbent can be easily recovered or manipulated with an external magnetic field and shows a good capacity for the rapid and efficient adsorption of multivalent metal cations from aqueous solutions.

An illustration for the binding and sulfonation of PAA on Fe₃O₄ nanoparticles to produce a magnetic, strong acid cation nano‐adsorbent.     

Selected‐Control Fabrication of Multifunctional Fluorescent–Magnetic Core–Shell and Yolk–Shell Hybrid Nanostructures

The selected‐control preparation of uniform core–shell and yolk–shell architectures, which combine the multiple functions of a superparamagnetic iron oxide (SPIO) core and europium‐doped yttrium oxide (Y₂O₃:Eu) shell in a single material with tunable fluorescence and magnetic properties, has been successfully achieved by controlling the heat‐treatment conditions. Furthermore, the shell thickness and interior cavity of SPIO@Y₂O₃:Eu core–shell and yolk–shell nanostructures can be precisely tuned. Importantly, as‐prepared SPIO@Y₂O₃:Eu yolk–shell nanocapsules (NCs) modified with amino groups as cancer‐cell fluorescence imaging agents are also demonstrated. To the best of our knowledge, this is the first report on the selected‐control fabrication of uniform SPIO@Y₂O₃:Eu core–shell nanoparticles and yolk–shell NCs. The combined magnetic manipulation and optical monitoring of magnetic–fluorescent SPIO@Y₂O₃:Eu yolk–shell NCs will open up many exciting opportunities in dual imaging for targeted delivery and thermal therapy.     

A Mechanistic Interpretation of Initialization Processes in RAFT‐Mediated Polymerization

Summary: The presence of strong chain length selectivity behavior during initialization in the RAFT process is an experimental observation. The mechanistic underpinning of the observation is, however, open to interpretation. The rates and concentration profiles for the cyanoisopropyl‐dithiobenzoate‐mediated polymerization of styrene at 70 °C can be relatively well reproduced by either the slow fragmentation or intermediate radical termination models. The use of modeling that provides a fit to the data is an important tool, but should be considered as additional evidence in support of experimental data rather than as experimental evidence in and of itself.

Comparison of the time dependencies of the concentrations of AD, AMD, and AM₂D by PREDICI modeling for the cyanoisopropyl‐mediated polymerization of styrene at 70 °C generated by the IRT model (lines) versus experimental data.     

Poly(acrylic acid)‐Modified Fe3O4 Microspheres for Magnetic‐Targeted and pH‐Triggered Anticancer Drug Delivery

Monodisperse poly(acrylic acid)‐modified Fe₃O₄ (PAA@Fe₃O₄) hybrid microspheres with dual responses (magnetic field and pH) were successfully fabricated. The PAA polymer was encapsulated into the inner cavity of Fe₃O₄ hollow spheres by a vacuum‐casting route and photo‐initiated polymerization. TEM images show that the samples consist of monodisperse porous spheres with a diameter around 200 nm. The Fe₃O₄ spheres, after modification with the PAA polymer, still possess enough space to hold guest molecules. We selected doxorubicin (DOX) as a model drug to investigate the drug loading and release behavior of as‐prepared composites. The release of DOX molecules was strongly dependent on the pH value due to the unique property of PAA. The HeLa cell‐uptake process of DOX‐loaded PAA@Fe₃O₄ was observed by confocal laser scanning microscopy (CLSM). After being incubated with HeLa cells under magnet magnetically guided conditions, the cytotoxtic effects of DOX‐loaded PAA@Fe₃O₄ increased. These results indicate that pH‐responsive magnetic PAA@Fe₃O₄ spheres have the potential to be used as anticancer drug carriers.     

One‐Pot Fabrication of Noble‐Metal Nanoparticles That Are Encapsulated in Hollow Silica Nanospheres: Dual Roles of Poly(acrylic acid)

An efficient and facile one‐pot method was developed to fabricate noble‐metal nanoparticles (NMNs; Au, Pt, PdO and Ag) that were encapsulated within hollow silica nanospheres (HSNs; NMNs@HSNs) with a size of about 100 nm. NMNs@HSNs were afforded in very high yields between 85–95 %. Poly(acrylic acid) (PAA) polyelectrolyte played a dual role in the fabrication process, both as a core template of the HSNs and as a captor of the NMNs through coordination interactions between the COO^? groups on the ammonium polyacrylate (APA) polyanionic chains and the empty orbital of the Au atom. The amount of Au loading in Au@HSNs was easily regulated by varying the volume of the HAuCl₄ solution added. In addition, these rattle‐type particles were successfully applied in the catalytic reduction of 2‐nitroaniline (2‐NA) as a model reaction, thus indicating that the micropores in the silica shell could achieve the transport of small species—with a size smaller than that of the micropores—into the cavity. Thus, these fabricated NMNs@HSNs have promising applications in catalysis.     

A Core–Shell Fe/Fe2O3 Nanowire as a High‐Performance Anode Material for Lithium‐Ion Batteries

The preparation of novel one‐dimensional core–shell Fe/Fe₂O₃ nanowires as anodes for high‐performance lithium‐ion batteries (LIBs) is reported. The nanowires are prepared in a facile synthetic process in aqueous solution under ambient conditions with subsequent annealing treatment that could tune the capacity for lithium storage. When this hybrid is used as an anode material for LIBs, the outer Fe₂O₃ shell can act as an electrochemically active material to store and release lithium ions, whereas the highly conductive and inactive Fe core functions as nothing more than an efficient electrical conducting pathway and a remarkable buffer to tolerate volume changes of the electrode materials during the insertion and extraction of lithium ions. The core–shell Fe/Fe₂O₃ nanowire maintains an excellent reversible capacity of over 767 mA h g^?1 at 500 mA g^?1 after 200 cycles with a high average Coulombic efficiency of 98.6 %. Even at 2000 mA g^?1, a stable capacity as high as 538 mA h g^?1 could be obtained. The unique composition and nanostructure of this electrode material contribute to this enhanced electrochemical performance. Due to the ease of large‐scale fabrication and superior electrochemical performance, these hybrid nanowires are promising anode materials for the next generation of high‐performance LIBs.