共查询到20条相似文献,搜索用时 2 毫秒
1.
2.
Vasilis P. Barberis John A. Mikroyannidis Vra Cimrov 《Journal of polymer science. Part A, Polymer chemistry》2006,44(19):5750-5762
Two new poly(fluorenediylvinylene)s (CV and CF) with coumarin side chains were synthesized via Heck coupling. The coumarin segments were attached to the C‐9 of fluorene through alkyl spacers. The polymers were soluble in common organic solvents such as tetrahydrofuran (THF), chloroform, dichloromethane, and toluene. The photoluminescence (PL), electroluminescence (EL), and electrochemical behavior of these polymers were studied. CV and CF thin films exhibited broad‐band, bluish‐green and orange PL emissions, with maxima at 475 and 585 nm, respectively. These PL maxima were redshifted in comparison with those measured in THF solutions. Aggregate formation played an important role in the solid state. The aggregation was more pronounced in CF thin films than CV thin films. Both polymers oxidized and reduced irreversibly. Light‐emitting devices (LEDs) with indium tin oxide hole‐injecting and aluminum electron‐injecting electrodes were prepared and studied. The LEDs made of CV emitted green light, and the LEDs made of CF exhibited an orange EL emissions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5750–5762, 2006 相似文献
3.
4.
将缺电子单元-S,S-二氧-二苯并噻吩(SO)以2,8位引入到聚螺芴(PSFs)的主链,通过Suzuki聚合得到一系列具有不同SO含量的共聚物PSF-28SO-3、PSF-28SO-5、PSF-28SO-7和PSF-28SO-10。 不同于3,7位连接,该系列2,8-位连接的共聚物既有来自于高分子主链的本征态(LE:local excited)发光,又有来自于从四烷氧基芴侧链到主链中SO单元的电荷转移(CT:charge transfer)发光,最终表现为近白光发射。 其中,PSF-28SO-10具有最优器件性能,发光效率为0.58 cd/A,色坐标为(0.25,0.36)。 相似文献
5.
6.
S. M. Andrews 《Journal of polymer science. Part A, Polymer chemistry》1992,30(2):221-226
The preparation of poly(4-oxy-1,4-phenylenesulfonyl-4,4′-biphenylene-4-sulfonylphenylene) (PBP) has been accomplished by the base mediated, polycondensation reaction between two biphenyl containing monomers. The bisphenol, 4,4′-bis[(4-hydroxyphenyl) sulfonyl]biphenyl (HSB), was reacted with 4,4′-bis[(4-chlorophenyl)sulfonyl]-biphenyl (CSB) in tetramethylene sulfone solvent. The highest mechanical properties and glass transition temperature was observed for polymer PBP with a reduced viscosity around 1.0 dL/g. Consequently, the current synthesis route provides polymer with higher properties than other historical preparative routes. Blends of PBP with a different poly(ether sulfone) were miscible based on the observance of a single glass transition temperature. The Tgs of the polymer blends exhibited an unusual positive deviation from the weighted linear averages of the components. 相似文献
7.
Takuya Ogawa Mamoru Tachikawa Nobuo Kushibiki Masashi Murakami 《Journal of polymer science. Part A, Polymer chemistry》1995,33(16):2821-2831
Poly(diarylsilmethylene)s with phenyl or tolyl substituents on Si atoms were synthesized by ring-opening polymerization of corresponding 1,1,3,3-tetraaryl-1,3-disilacyclobutanes, and were characterized by means of DSC, x-ray diffraction and melt viscosity measurements. Three preparative routes including catalytic and noncatalytic polymerization methods were examined to see differences in properties of the resulting polymers. The polymers thus obtained were crystalline and soluble in limited solvents such as diphenyl sulfone at tem-peratures above 250°C. Poly(diphenylsilmethylene) exhibited a melting temperature of about 350°C, whereas those of polymers with tolyl groups were observed in a temperature range between 310 and 330°C. The melt viscosity of the poly(diarylsilmethylene)s was measured to obtain insight into the molecular weights of the polymers, and the results indicated that the molecular weights are modifiable by varying the monomer-to-catalyst ratio when solution polymerization is employed. The DSC and x-ray studies were also carried out with focusing on the melting and crystallization behavior of these polymers. © 1995 John Wiley & Sons, Inc. 相似文献
8.
9.
Synthesis and Properties of Novel Poly(amine ether)s 总被引:8,自引:0,他引:8
Using aromatic bis(4-bromophenyl) ether and various aromatic diamines as the monomers, a series of novel poly(amine ether)s (PAEs) have been synthesized via palladium-catalyzed aryl amination, which is the Hartwig-Buchwald polycondensation reaction. Their structures were characterized by means of elemental analysis, FT-IR, 1^H NMR and UV-Vis spectroscopy. The results show a good agreement with the proposed structures. Their general properties were studied by DSC and TG and it's obvious that they show high glass transition temperatures (Tg〉200 ℃), good thermal stability with high decomposition temperatures (TD〉500℃) and excellent solubility. The mechanical behavior of these polymers suggested that they could be considered a new class of high-performance polymers. 相似文献
10.
Novel conjugated materials, poly(4,8-dialkoxy-1,5-naphthalenevinylene)s (OCn-PNV, n = 4, 6, 8, and 12), have been prepared by a method similar to the Gilch procedure. The structure, optical and thermal properties of these polymers with various alkoxy side chain lengths have been evaluated by IR, UV-Vis absorption, fluorescence emission and thermogravimetric analysis. The band gap of OCn-PNV increases with increasing side chain length. Moreover, wavelengths of the photoluminescence (PL) emission peaks (λmax) of OCn-PNV solutions decrease with increasing alkoxy side chain length. This is probably due to the entanglement of long side chains that causes distortion of the conjugated main chains and thereby raises band gap of the polymer. PL λmax's of these polymers in film state are red-shifted by 14–59 nm than those in solution state. The red-shift is due to the more chain aggregations after spin coating from solution into film state and consequently the lower band gap in the film state. Besides, the polymer with shorter side chains is more thermally stable than that with longer side chains. 相似文献
11.
苯并双噁唑类聚合物的合成 总被引:1,自引:0,他引:1
详细介绍了以4,6-二氨基间苯二酚盐酸盐(DADHB)为原料,采用多聚磷酸法、三甲基硅烷基化法、中间相聚合法、单体成盐法合成聚对苯撑苯并双噁唑(PBO),还有以4,6-二硝基间苯二酚(DNR)为原料,先选择还原制得4-氨基-6-硝基间苯二酚盐酸盐,进而与对甲氧羰基苯甲酰氯进行缩环合获得苯并噁唑化合物,再催化加氢合成AB型PBO新单体2-(对甲氧羰基苯基)-5-氨基-6-羟基苯并噁唑,最后自缩聚反应制备PBO的新路线.另外,本文还介绍了直链烯烃型、直链脂肪烷烃型、稠环芳烃型、联苯取代基型、杂环型、聚醚型等苯并双噁唑类聚合物的合成方法. 相似文献
12.
Jin Yan WANG Shu De XIAO Xi Gao JIAN* Department of Polymer Science & Materials Dalian University of Technology Dalian 《中国化学快报》2003,14(4)
Aromatic polyimides are distinguished for their excellent mechanical and thermal properties in many engineering fields1. However, aromatic polyimides are normally insoluble in common organic solvents, which restricts their applications in some fields. Many efforts have been taken to improve their solubility. Introducing bulky side groups and non-coplanar structure into polymers bone chains is a good way to obtain the polymers with excellent mechanical and thermal properties2. In this paper… 相似文献
13.
Well‐defined poly(ethylene oxide)s (PEOs) bearing reactive sites regularly distributed along the chain have been synthesized by the polycondensation of PEO containing a central tertiary amino group with dichloromethane, followed by quaternization with suitable reagents to obtain polyzwitterionic or cationic PEOs with alkyl, allyl, or fluorocarbon pendant groups. The pendant allyl groups have been converted into primary amino groups by reaction with 2‐aminoethanethiol hydrochloride to obtain polyamino‐functionalized PEO.
14.
Lee Soon Park Tae Hyung Lee Soo Chang Lee 《Journal of polymer science. Part A, Polymer chemistry》1999,37(14):2311-2317
Copolymerizations of p-dichlorobenzene (DCB)/4-bromophenyl ether (BPE), DCB/4,4′-dibromobiphenyl (DBB), and DBB/BPE pairs with sodium sulfide under high temperature (270–290°C) utilizing N-methyl-2-pyrrolidinone (NMP) as solvent were carried out to give C(DCB/BPE), C(DCB/DBB), and C(DBB/BPE) copolymers, respectively. The reactivity of dihaloaromatic monomers toward thiolate anion in the polycondensation reaction followed the order DBB > DCB > BPE. The reactivity gap between DBB and DCB toward thiolate anion seemed to be smaller than that between BPE and DCB, resulting in both high yield and high molecular weight in the C(DCB/DBB) copolymers compared to C(DCB/BPE) copolymers. The copolymerization of DBB/BPE pair with sodium sulfide, which has larger reactivity gap than the DCB/DBB or DCB/BPE pair, gave mixtures of PBS and PPSE homopolymers especially in the range of 50–80 mol % BPE in the feed. The C(DCB/DBB) and C(DCB/BPE) copolymers, however, exhibited random copolymer character in all comonomer ratios in the feed as evidenced by copolymer composition and DSC data. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2311–2317, 1999 相似文献
15.
Dr. Tobias Steinbach Dr. Frederik R. Wurm 《Angewandte Chemie (International ed. in English)》2015,54(21):6098-6108
Poly(phosphoester)s (PPEs) play an important role in nature. They structure and determine life in the form of deoxy‐ and ribonucleic acid (DNA and RNA), and, as pyrophosphates, they store up chemical energy in organisms. Polymer chemistry, however, is dominated by the nondegradable polyolefins and degradable poly(carboxylic ester)s (PCEs) that are produced on a large scale today. Recent studies have illustrated the potential of PPEs for future applications beyond flame retardancy, and provided a coherent vision to implement this classic biopolymer in modern applications that demand biocompatibility and degradability as well as the possibility to adjust the properties to individual needs. 相似文献
16.
17.
18.
以9,9-双-(3-R-4-氨基苯基)芴(R=H,CH3,F)和1,4-双-(4′-溴苯酰基)苯为单体,通过BuchwaldHartwig交叉偶联反应,缩聚合成了芴基Cardo型聚亚胺酮(PIKF).利用MS软件对其分子结构进行模拟,并通过1H NMR和FTIR等方法进行表征,结果与目标产物吻合.利用凝胶渗透色谱(GP... 相似文献
19.
A series of thermotropic liquid crystalline poly(ester-imide)s was synthesized by melt polymerization of diacetoxynaphthalene acid and n-(ω-carboxyalkylene) trimellitic imides. All polymers with 2,6 substituent positions (n-2,6 PEIM) on the napthalene ring exhibit liquid crystalline phases, whereas polymers with 2,7 substituent positions (n-2,7 PEIM) do not. This result suggests that the kink structure of n-2,7 PEIMS would hinder the formation of liquid crystalline polymer. The copoly(ester-imide)s with an irregular sequence of aliphatic units and aromatic mesogens showed the liquid crystallinity with the lower transition temperatures and a lesser tendency to crystallize than homopoly(ester-imide)s. The semicrystalline polymers with more regular monomeric sequence in the main chain showed the hysteresis of viscoelastic property in the temperature cycle. A nematic glassy copolymer gave the higher molecular orientation to the fiber than a semicrystalline polymer. © 1997 John Wiley & Sons, Ltd. 相似文献
20.
以四烯丙基联苯二酚(TABP)、 双酚A和十氟联苯为原料, 通过室温缩聚制得含氟聚芳醚(FPAEs), 再将其与3-巯基丙酸进行加成, 制得羧基化含氟聚芳醚(CFPAEs). 通过改变TABP的投料量来调节产物的羧基含量. 以N-甲基吡咯烷酮(NMP)为溶剂, 将CFPAE涂层喷涂在马口铁上. 研究发现, CFPAE涂层具有优异的热稳定性和机械强度, 羧基的引入可显著提高含氟聚芳醚涂层的附着力. 当羧基含量为0.265 mmol/g时, 涂层的黏附力等级为0级, 铅笔硬度为6H, 不引起涂层破坏的最小轴棒直径为0.5 mm, 水接触角为103.9°. 此外, CFPAE涂层还具有优异的耐酸、 耐盐、 抗紫外老化和防腐蚀等性能. 研究结果表明, 羧基化是拓展含氟聚芳醚在特种氟碳涂料上应用的一种有效途径. 相似文献