High‐Temperature Crystalline Phases in Nylon 6/Clay Nanocomposites

Summary: Nylon 6/clay nanocomposites (N6CN) with different cooling histories were investigated by differential scanning calorimetry (DSC) and variable‐temperature X‐ray diffraction (XRD). Above the melting temperature, new endothermic peaks appeared in the DSC trace for N6CN. All the neat nylon 6 samples presented amorphous XRD patterns when heated up to the melting range. However, for N6CN samples, undefined crystalline structures remained in the substantially molten polymer matrix up to 300 °C.

XRD patterns of a quenched nylon 6 sample annealed at 210 °C and N6CN samples annealed at 210, 230, and 300 °C, respectively.     

Towards a Living Radical Polymerization of Styrene by Using Dithiolactone as a New Type of Mediating Agent

In this communication, γ‐phenyl‐γ‐butyrodithiolactone (DTL1) is presented as the first example of a new type of control agent. The styrene polymerization carried out at 60 °C in the presence of DTL1 exhibits living characteristics, without consuming DTL1 during the process. This unprecedented behavior was explained by a mechanism based on the reversible formation of a persistent radical adduct between the DTL1 and the polystyrene macroradicals.

     

Thermal Degradation Behavior and Kinetic Analysis of Biodegradable Polymers Using Various Comparative Models, 1

Thermal degradation behavior of a biodegradable polymer (PBS) has been investigated by conventional and MTGA methods. The kinetic parameters of degradation were calculated by a general analytical solution and by the Coats‐Redfern, Ozawa, Horowitz‐Metzger, and MTGA methods. The results reveal that the reaction mechanism at lower temperature is probably the F1 model through the reaction of random chain cleavage via cis‐elimination. However, the reaction mechanism at higher temperature is likely to be D1 model because of the dominant diffusion control effect.

     

Ordered Honeycomb‐Structured Films from Dendronized PMA‐b‐PEO Rod‐Coil Block Copolymers

Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO₁₁₃‐b‐PDMA₈₂) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.

     

Unusual Crystallization Behavior in Nylon‐6 and Nylon‐6/Montmorillonite Nanocomposite Films

Summary: The crystallization behavior of nylon‐6 and nylon‐6/montmorillonite nanocomposite films with different heat histories was investigated by wide‐angle X‐ray diffraction (WAXD). For nylon‐6 films isothermally crystallized above 170 °C or annealed at 200 °C and then quenched in ice water, a crystalline peak appeared at 2θ = 28.5°. This crystalline peak was strong in intensity for the former and weak for the latter. However, for nylon‐6 films cooled in air after isothermal crystallization or annealing, no crystalline peak at 2θ = 28.5° was observed in the WAXD patterns. For nylon‐6/montmorillonite nanocomposite films annealed above 140 °C, a crystalline double peak was observed between the α1 and α2 peaks. The possible origins of the peak at 2θ = 28.5° and the crystalline double peak are discussed.

WAXD patterns of isothermally crystallized nylon‐6/montmorillonite nanocomposite films.     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Facile Fabrication of pH‐Responsive and Size‐Controllable Polymer Vesicles From a Commercially Available Hyperbranched Polyester

A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).

     

DMAP/Cr(III) Catalyst Ratio: The Decisive Factor for Poly(propylene carbonate) Formation in the Coupling of CO2 and Propylene Oxide

Highly efficient formation of poly(propylene carbonate) can be achieved in the coupling of CO₂ and propylene oxide assisted by 4‐(N,N‐dimethylamino)pyridine (DMAP) and catalyzed with salen chromium(III) chloride by using DMAP/Cr ratios of less than 2. Under these conditions a possible backbiting mechanism is suppressed, leading to only minor amounts of cyclic carbonate as a side product.

     

Living Polymerization of N,N‐Diphenylacrylamide with Triisobutylaluminum

Summary: N,N‐Diphenylacrylamide was polymerized in a living fashion with triisobutylaluminum in THF at 0 °C. The polymerization results showed an increase of molecular weight proportional to the amount of monomer consumed and a first‐order kinetics at −78 °C. The intermediates obtained with excess initiator at −78 °C revealed that the polymerization was initiated through 1,4‐addition of hydride from a triisobutyl group in the triisobutylaluminum and then proceeded through aluminum‐oxygen bond interchange.

N,N‐Diphenylacrylamide was polymerized in a living fashion with triisobutylaluminum in THF at 0 °C.     

Low‐Density Polyethylene (LDPE) Surface With a Wettability Gradient by Tuning its Microstructures

Summary: We describe an interesting approach to the fabrication of wettability gradients from hydrophobicity to superhydrophobicity in low‐density polyethylene (LDPE) films by first forming high porosity surfaces and placing the specimens onto linear temperature gradients. While the polymer chosen for the study is non‐polar, its microporous layer provides sufficient superhydrophobicity. Lateral gradient heating of the layer results in partial melting of the polymer and correspondingly decreases porosity thus decreasing hydrophobicity.

     

The β Phase Formation Limit in Two Poly(9,9‐di‐n‐octylfluorene) based Copolymers

Random copolymers of poly(9,9‐di‐n‐octylfluorene) (PF8) incorporating 0, 8, 12, 15, and 20% dibenzothiophene (DBT), and copolymers with 2, 5, 8, 12, and 15% dibenzothiophene‐S,S‐dioxide (S‐unit) were synthesised. Absorption and emission spectra of thin films indicate that the DBT system shows a linear decrease of toluene vapour induced β phase with increasing DBT content to a 20% cutoff, whilst in the S‐unit copolymers the β phase is present up to 12% co‐monomer content, and at 15% the characteristic absorption peak is absent or masked. These results demonstrate the limits, in thin films, at which the β phase can be formed in widely used PF8 copolymer systems for device applications and clearly show that it is practical to use copolymers having electron or hole transport units in the polyfluorene backbone and still be able to form efficient β phase emission sites.

     

SET‐RAFT Polymerization of Progargyl Methacrylate and a One‐Pot/One‐Step Preparation of Side‐chain Functionalized Polymers via Combination of SET‐RAFT and Click Chemistry

A clickable alkyne monomer, PgMA, was successfully polymerized in a well‐controlled manner via single electron transfer initiation and propagation through the radical addition fragmentation chain transfer (SET‐RAFT) method. The living nature of the polymerization was confirmed by the first‐order kinetic plots, the linear relationships between molecular weights and the monomer conversions while keeping relatively narrow (≤1.55), and the successful chain‐extension with MMA. The better controllability of SET‐RAFT than other CRP methods is attributed to the less competitive termination in view of the presence of the CTA as well as the Cu(II) that is generated in situ. Moreover, a one‐pot/one‐step technique combining SET‐RAFT and “click chemistry” methods has been successfully employed to prepare the side‐chain functionalized polymers.

     

A Self‐Assembling Polythiophene Functionalised with a Cysteine Moiety

A new copolymer bearing a cysteine moiety, designed for molecular interaction, metal‐ion detection, and chiral recognition, was synthesised starting from the dibromo derivative of methyl N‐(tert‐butoxycarbonyl)‐S‐thien‐3‐ylcysteinate and distannylthiophene through a Stille coupling reaction. UV‐vis spectroscopy, circular dichroism, NMR spectroscopy, and gel permeation chromatography analyses evidenced that this polymer is able to form self‐assembling structures, through the formation of a hydrogen‐bond network, not only in the solid state but also in solution.

     

Combining Steric and Electrostatic Stabilization Using Hydrophilic MacroRAFT Agents in an Ab Initio Emulsion Polymerization of Styrene

Hydrophilic (co)polymers carrying a thiocarbonyl thio end group such as poly(dimethylaminoethyl methacrylate), poly(ethylene oxide), and poly(ethylene oxide)‐block‐poly(dimethylaminoethyl methacrylate) have been evaluated as precursors of stabilizers in batch ab initio emulsion polymerization of styrene under acidic conditions to form electrosterically stabilized polystyrene latex particles. As a mixture of P(DMAEMA/H⁺Cl⁻)‐RAFT and PEO‐RAFT failed to give satisfactory results, PEO‐RAFT was used as a control agent for the RAFT polymerization of DMAEMA, and the resulting block copolymer was successfully used in ab initio styrene emulsion polymerization.

     

Selective Guest Uptake from Solvent Mixtures in the Clathrate Phase of Syndiotactic Polystyrene

Summary: Selective absorption uptake during the guest‐exchange processes in the δ form of syndiotactic polystyrene (sPS) was confirmed by IR spectroscopy. When films of the δ form were immersed in hexane/decane or chloroform/decane mixtures, decane molecules were incorporated preferentially in the δ form. Sorbate uptake by the δ form was greatly accelerated when the sorbate was mixed with a solvent penetrable to the amorphous region of sPS.

Concentration changes in a δ‐form film during sorption processes: sorption of a chloroform(D)/decane(H) mixture (1:1 molar ratio).     

Plasma‐Initiated Controlled/Living Radical Polymerization of Methyl Methacrylate in the Presence of 2‐Cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN)

Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.

Dependence of ln([M]₀/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C.     

Synthesis of Poly(ethylene oxide)s Bearing Functional Groups along the Chain

Well‐defined poly(ethylene oxide)s (PEOs) bearing reactive sites regularly distributed along the chain have been synthesized by the polycondensation of PEO containing a central tertiary amino group with dichloromethane, followed by quaternization with suitable reagents to obtain polyzwitterionic or cationic PEOs with alkyl, allyl, or fluorocarbon pendant groups. The pendant allyl groups have been converted into primary amino groups by reaction with 2‐aminoethanethiol hydrochloride to obtain polyamino‐functionalized PEO.

Polyfunctional PEOs bearing different pendant groups.