Electrochemical studies of chloroperoxidase on poly-L-lysine film modified GC electrode

<正>Poly-L-lysine(PLL) was first electrodeposited onto the surface of a glassy carbon(GC) electrode.The PLL modified electrode was used to immobilize chloroperoxidase(CPO) via 1-[(3-dimethylamino)propyl]-3-ethylcarbodiimide hydrochloride(EDC).The electrochemical behaviors of immobilized CPO on PLL/GC electrode were investigated by cyclic voltammetry(CV).The CV results obtained showed that CPO was successfully immobilized on the PLL/GC electrode and a fast direct electron transfer between CPO and PLL-GC electrode was achieved with a formal redox potential of -0.23 V vs.SCE.The CPO-PLL/GC modified electrode showed a good catalytic activity for electrocatalytical reduction of O_2,promising for a broad range of CPO-catalyzed transformations.     

Electron transfer studies of redox probes in bovine milk

In this work, we show that milk can act as an electrolytic medium to study electrochemical processes in the absence of any supporting electrolyte. The electron transfer properties of three different redox systems in bovine homogenized whole milk, skimmed milk, and reconstituted milk powder have been studied by cyclic voltammetry and impedance spectroscopy using a three-electrode system with a gold disk working electrode, a platinum sheet counter electrode, and a standard calomel reference electrode. It has been shown that the milk incredibly sustains the redox reactions in the absence of any supporting electrolyte and the electrochemical responses are comparable to those obtained when the same reactions were carried out in standard solvent preparations containing supporting electrolytes. The study clearly demonstrates the potential of developing new innovative techniques based on the intricate concepts of electrochemistry to study various aspects of milk that may help in the development of analytical sensors for the diary industry.     

Using atomic layer deposition to hinder solvent decomposition in lithium ion batteries: first-principles modeling and experimental studies

Passivating lithium ion (Li) battery electrode surfaces to prevent electrolyte decomposition is critical for battery operations. Recent work on conformal atomic layer deposition (ALD) coating of anodes and cathodes has shown significant technological promise. ALD further provides well-characterized model platforms for understanding electrolyte decomposition initiated by electron tunneling through a passivating layer. First-principles calculations reveal two regimes of electron transfer to adsorbed ethylene carbonate molecules (EC, a main component of commercial electrolyte), depending on whether the electrode is alumina coated. On bare Li metal electrode surfaces, EC accepts electrons and decomposes within picoseconds. In contrast, constrained density functional theory calculations in an ultrahigh vacuum setting show that, with the oxide coating, e(-) tunneling to the adsorbed EC falls within the nonadiabatic regime. Here the molecular reorganization energy, computed in the harmonic approximation, plays a key role in slowing down electron transfer. Ab initio molecular dynamics simulations conducted at liquid EC electrode interfaces are consistent with the view that reactions and electron transfer occur right at the interface. Microgravimetric measurements demonstrate that the ALD coating decreases electrolyte decomposition and corroborates the theoretical predictions.     

Electrochemical and microscopic studies of surface-confined DNA

We have studied the micropatterning and characterization of the organic monolayers using cyclic voltammetry (CV), scanning electrochemical microscopy (SECM), atom force microscopy, and AC impedance, and have determined the electrochemical parameters, i.e., the apparent reaction rate constant (K _f) and the coverage of the electrode surface (θ). CV and SECM experiments demonstrated that the surface of the modified electrode represents an insulating substrate for ferricyanide. Using the high sensitivity of the electron transfer of ferricyanide to the modification of the gold surface with DNA, we selected this reaction as a probe to study the different modification stages at this modified electrode. SECM images obtained from bare, partially modified, and totally modified electrodes showed very good resolution with different topographies or null according to the extent of modification. Based on a comparison with the results of the experiments, a reasonable agreement can be obtained, which means a conjunction of these techniques.     

Mechanistic studies on lanthanum fluoride crystal electrodes

A mechanistic study of the fluoride electrode involving the impedance measurement technique was performed. The influence of the reference electrode, the fluoride ion concentration and the convection on the indicatrix were examined. From the results it followed that the linear equivalent model of the fluoride electrode may be represented by three components namely, a parallel R-C network representing the bulk of the membrane, two double layer capacities one on each side of the sensor, each shunted by a charge transfer resistor and finally, a diffusion impedance.     

嵌入电极反应循环伏安曲线的理论研究

嵌入电极反应的循环伏安图一般具有氧化峰和还原峰间距很大的特点,并且往往要求采用非常低的电位扫描速度。本研究基于嵌入电极反应的热力学方程和电荷传递动力学方程,对其循环伏安曲线进行了理论处理,讨论了嵌入电极反应热力学参数b,动力学参数D和k,电位扫描速度u,及电极和溶液电阻对循环伏安曲线的影响,解释了实验得到的嵌入电极反应循环伏安曲线的特殊性。     

Fast voltammetric studies of the kinetics and energetics of coupled electron-transfer reactions in proteins

A wealth of information on the reactions of redox-active sites in proteins can be obtained by voltammetric studies in which the protein sample is arranged as a layer on an electrode surface. By carrying out cyclic voltammetry over a wide range of scan rates and exploiting the ability to poise or pulse the electrode potential between cycles, data are obtained that are conveniently (albeit simplistically) analysed in terms of plots of peak potentials against scan rate. A simple reversible electron-transfer process gives rise to a 'trumpet'-shaped plot because the oxidation and reduction peaks separate increasingly at high scan rate; the electrochemical kinetics are then determined by fitting to Butler-Volmer or Marcus models. Much more interesting though are the ways in which this 'trumpet plot' is altered, often dramatically, when electron transfer is coupled to biologically important processes such as proton transfer, ligand exchange, or a change in conformation. It is then possible to derive particularly detailed information on the kinetics, energetics and mechanism of reactions that may not revealed clearly or even at all by other methods. In order to interpret the voltammetry of coupled systems, it is important to be able to define 'ideal behaviour' for systems that are expected to show simple and uncoupled electron transfer. Accordingly, this paper describes results we have obtained for several proteins that are expected to show such behaviour, and compares these results with theoretical predictions.     

Nafion/tetraruthenated porphyrin glassy carbon-modified electrode: characterization and voltammetric studies of sulfite oxidation in water–ethanol solutions

In this work, the modification of a glassy carbon electrode with tetraruthenated porphyrins electrostatically assembled onto a Nafion film, previously adsorbed on the electrode surface, is reported. This modified electrode was characterized by scanning electron microscopy–energy-dispersive X-ray, Raman spectroscopy, UV-Vis spectroelectrochemistry, and cyclic voltammetry. The Nafion film onto the glassy carbon electrode shows a smooth disposition; when the tetraruthenated porphyrin is incorporated on the Nafion film, the complex is adsorbed in a homogeneous way. The modified electrode catalyzes HSO₃⁻ oxidation in water–ethanol solutions and shows an enhanced stability compared with the electrode modified with the dip coating method. Rotating disk electrode experiments showed a kinetic limitation to the electron transfer controlled by charge propagation in the film. I/E curves show a Tafel slope of 120 mV/decade corresponding to a first electron-transfer reaction, depending on the potential, as the determining step. Spectroelectrochemical experiments demonstrated that Ru(II) is the active site for the electrocatalysis.     

Electrochemical impedance spectroscopy in interfacial studies

A fundamental aim in the field of electrochemistry is to investigate electron transfer events caused by electrode processes, which are more commonly described as redox reactions. In this short review, an overview of the use of electrochemical redox reactions in the realm of organic synthesis is given. These reactions can be divided into three subcategories: cathodic reduction, anodic oxidation, and a paired approach. This short review illustrates the basic schemes of these reactions and introduces representative examples that have been reported in the past 2 years, with a particular emphasis on the development of novel reactions.     

Comparative study of the thermodynamics and kinetics of the ion transfer across the liquid/liquid interface by means of three-phase electrodes

A comparative study of the behavior of different sorts of three-phase electrodes applied for assessing the thermodynamics and kinetics of the ion transfer across the liquid/liquid (L/L) interface is presented. Two types of three-phase electrodes are compared, that is, a paraffin-impregnated graphite electrode at the surface of which a macroscopic droplet of an organic solvent is attached and an edge pyrolytic graphite electrode partly covered with a very thin film of the organic solvent. The organic solvent contains either decamethylferrocene or lutetium bis(tetra-tert-butylphthalocyaninato) as a redox probe. The role of the redox probe, the type of the electrode material, the mass transfer regime, and the effect of the uncompensated resistance are discussed. The overall electrochemical process at both three-phase electrodes proceeds as a coupled electron-ion transfer reaction. The ion transfer across the L/L interface, driven by the electrode reaction of the redox compound at the electrode/organic solvent interface, is independent of the type of redox probe. The ion transfer proceeds without involving any chemical coupling between the transferring ion and the redox probe. Both types of three-phase electrodes provide consistent results when applied for measuring the energy of the ion transfer. Under conditions of square-wave voltammetry, the coupled electron-ion transfer at the three-phase electrode is a quasireversible process, exhibiting the property known as "quasireversible maximum". The overall electron-ion transfer process at the three-phase electrode is controlled by the rate of the ion transfer. It is demonstrated for the first time that the three-phase electrode in combination with the quasireversible maximum is a new tool for assessing the kinetics of the ion transfer across the L/L interface.     

Electrochemical quartz crystal microbalance studies of redox polymer films

Electrochemical quartz crystal microbalance measurements are reported for redox switching of thin films of three macromolecule-metal complexes: poly(vinylferrocene) (PVF), 10% osmium-functionalized poly(vinylpyridine) (Os-PVP), and 10% osmium functionalized poly(vinylpyridine-co-styrene) (Os-PVP-co-PS). The data provide insight into the ion and solvent transfer processes associated with electron transfer between the electrode and the electroactive film. Four important parameters are identified: electrolyte composition, (co)polymer composition, prior film history and experimental time scale.     

Electrochemical studies of a novel biosensor based on the CuO nanoparticles coated with horseradish peroxidase to determine the concentration of phenolic compounds

The present work is an attempt to design new electrochemical biosensor that easily determines the concentration of phenolic compounds in water and wastewaters. It is well-known that enzymes can add selectivity towards one or limited number of compounds. Thus, in the present study, horseradish peroxidase (HRP) was coated on CuO nanoparticles and immobilized on the electrode using a thin polymeric film. The electrochemical studies of modified electrode were carried out by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The voltammetric and EIS results confirm the possibility of HRP direct electron transfer at CuO nanoparticles. Our results revealed that the modified electrode can be used to determine the phenol concentration in the standard solutions and real samples. The present biosensor has good relative standard deviation (RSD% = 7%) and detection limit (DL of 0.1 μM), in addition to high stability.     

Spectroscopic and impedance studies of reverse biased degraded dye solar cells

The work that is presented here is focused on the results that were obtained during studies of the performance of dye solar cells under certain reverse bias conditions. This reverse voltage could permanently modify or damage a cell if it is not properly protected. Various techniques were employed to determine the physical changes in the cell. It was found that a cell that was subjected to a reverse bias of 2?V for 500?min showed a 58% recovery. The UV-vis spectra showed a blue shift (higher energy), the Raman showed no peak at 1,713?cm^?1 and the FT-IR showed the disappearance of the S-C-N absorption band at 2,100?cm^?1. The combined conclusion is that the NCS ligand has been depleted and replaced with I ₃ ^? ions. Nyquist and Bode plots showed an increase in the charge transfer resistance at the counter electrode. This indicates a partial oxidation of the Pt catalyst on the counter electrode. The changes in the cell after being subjected to a reverse bias potential of 2?V for 500?min are changes on the NCS bonds on the Ru containing dye as well as the Pt on the counter electrode.     

Electrochemical approach to the development of a photoelectrode on the basis of photosynthetic reaction centers

Experimental approaches to the coupling of photoinduced charge separation in reaction centers (RCs) of the photosynthetic bacterium Rhodobacter sphaeroides R-26 with electron transfer to an electrode are discussed. Exogenous quinones are used as an electron transfer mediator. With the use of photopolarography it is shown that water-soluble ubiquinone can serve as a diffusionally mobile mediator of electron transfer. Some methods of quinone immobilization at an electrode have been developed to obtain a non-diffusional mediator of electron transfer. Quasi-reversible electrochemical kinetics were observed for aminonaphthoquinone immobilized as a monolayer at a Pt electrode. The ubiquinone-depleted RCs were subjected to affinity immobilization at these chemically modified electrodes probably due to the insertion of the immobilized quinone into the primary quinone Q_A binding site. The quantum efficiency of photocurrent formation was ca. 5% for the photoelectrode obtained. The electrochemical process of the immobilized quinone is shown to be the stage that limits electron transfer from RCs to the electrode.     

Determination of electron transfer kinetic parameters by fourier transform electrochemical impedance spectroscopic analysis

A new attempt to obtain electron transfer kinetic parameters at an electrified electrode/electrolyte interface using Fourier transform electrochemical impedance spectroscopic (FTEIS) analyses of small potential step chronoamperometric currents is presented. The kinetic parameters thus obtained allowed mass transport free voltammograms to be constructed in an overpotential region, where the diffusion limits the electron transfer reaction, using the Butler-Volmer (B-V) relation. The B-V voltammograms clearly distinguish electrode reactions that are not much different in their electron transfer kinetic parameters, thus showing very similar normal linear sweep voltammetric (SCV) behaviors. Electrochemical reduction of p-benzoquinone, which displays nearly the same SCV responses at a gold electrode regardless whether the electrode is covered by a thiolated beta-cyclodextrin self-assembled monolayer, was taken as an example for the demonstration. The results show that the two voltametrically similar systems display very different electron transfer characteristics.     

Electrochemical and ESR studies of aromatic nitroso spin traps

The oxidation and reduction potentials of 23 nitroso compounds among which were included the most important spin traps have been determined by means of cyclic voltammetry and voltammetry at the rotating electrode. The electron transfer generally involved one electron, leading to the corresponding ion radicals. When persistent species resulted from the electron transfer, their ESR spectra were recorded and analyzed with the help of EHT calculations. The observed anion radicals are typical delocalized Π radicals, while the cation radicals are Σ radicals with a SOMO orthogonal to the Π system. Secondary species formed from these primary ion radicals were also observed and identified by e.s.r.     

Electrochemical studies of the tetrabutyl- and tetramethyl-ammonium ion transfer across the water-1,2-dichloroethane interface: A comparison with the water—nitrobenzene interface

The results of electrochemical studies on the reaction of tetrabutyl- and tetramethylammonium (TBA⁺ and TMA⁺) ion transfer from water to 1,2-dichloroethane are presented in this paper and are compared with se of the water—nitrobenzene interface. The TMA⁺ ion transfer has been studied by the chronopotentiometric cyclic voltammetry methods and that of the TBA⁺ ion by the chronopotentiometric method only.It has been found that the reactions are diffusion controlled over the current density range up to about 1O μA cm^?2 and at polarization rates up to 0.15V s^?1. Diffusion coefficients of the studied ions have been detemined, as well as their formal potentials with respect to an ion-selective tetrabutylammonium electrode to a partition electrode containing tetraethylammonium picrate whose potential is close to zero. In additon, kinetic parameters of the transfer reaction have been determined for the tetrabutylammonium ion from data obtained at current densities over 10 μA cm^?2 (irreversible range).     

Theoretical analysis of the two-electron transfer reaction and experimental studies with surface-confined cytochrome c peroxidase using large-amplitude Fourier transformed AC voltammetry

A detailed analysis of the cooperative two-electron transfer of surface-confined cytochrome c peroxidase (CcP) in contact with pH 6.0 phosphate buffer solution has been undertaken. This investigation is prompted by the prospect of achieving a richer understanding of this biologically important system via the employment of kinetically sensitive, but background devoid, higher harmonic components available in the large-amplitude Fourier transform ac voltammetric method. Data obtained from the conventional dc cyclic voltammetric method are also provided for comparison. Theoretical considerations based on both ac and dc approaches are presented for cases where reversible or quasi-reversible cooperative two-electron transfer involves variation in the separation of their reversible potentials, including potential inversion (as described previously for solution phase studies), and reversibility of the electrode processes. Comparison is also made with respect to the case of a simultaneous two-electron transfer process that is unlikely to occur in the physiological situation. Theoretical analysis confirms that the ac higher harmonic components provide greater sensitivity to the various mechanistic nuances that can arise in two-electron surface-confined processes. Experimentally, the ac perturbation with amplitude and frequency of 200 mV and 3.88 Hz, respectively, was employed to detect the electron transfer when CcP is confined to the surface of a graphite electrode. Simulations based on cooperative two-electron transfer with the employment of reversible potentials of 0.745 ± 0.010 V, heterogeneous electron transfer rate constants of between 3 and 10 s(-1) and charge transfer coefficients of 0.5 for both processes fitted experimental data for the fifth to eighth ac harmonics. Imperfections in theory-experiment comparison are consistent with kinetic and thermodynamic dispersion and other nonidealities not included in the theory used to model the voltammetry of surface-confined CcP.     

Immobilization of hydroquinone through a spacer to polymer grafted on carbon black for a high-surface-area biofuel cell electrode

We immobilized hydroquinone through a spacer to polymer grafted on carbon black and achieved a high-surface-area biofuel cell electrode. Quinone compounds are well-known to transfer electrons in the respiratory chain and have been considered prospective mediators in biofuel cells because of their relatively negative redox potentials. Evaluation of three different spacer arms tethering hydroquinone to linear polymers revealed that only the hydrophilic and flexible di(ethylene oxide) spacer made it possible for immobilized hydroquinone to transfer electrons from glucose oxidase (GOD) to an electrode; direct immobilization and an alkyl spacer did not. The electrode comprising hydroquinone immobilized through di(ethylene oxide) spacer to polymer grafted on carbon black transferred electrons from GOD to the electrode. The potential at which an anodic current began to increase was more negative by about 0.2 V than that for a vinylferrocene-mediated electrode, while the increase in the anodic current density was of the same order.     

Voltammetric studies of the activity of an electrode made of a graphite-epoxy composite in redox reactions of ascorbic acid and hydroquinone

The potentials of the anodic peak of ascorbic acid oxidation and the potential differences of anodic and cathodic peaks (ΔE _p) of the hydroquinone/benzoquinone redox system at an electrode made of a graphite-epoxy composite are determined in weakly acidic and neutral supporting electrolytes by direct and cyclic voltammetry. The results obtained are compared with thermodynamic values and with the available values of these parameters at different solid electrodes for the above-mentioned redox systems. The effect of aging of the surface of electrodes made of graphite-epoxy composites on the potentials and peak currents of the anodic oxidation of ascorbic acid are studied. It is demonstrated that the regeneration of the electrode surface by mechanically cutting thin layers is important for reducing the δE _p value of the hydroquinone/benzoquinone redox system down to 28–30 mV in supporting electrolytes with pH 2.0 and 7.0. This value is typical of thermodynamically reversible electrode reactions involving two-electron transfer at 20–25°C.