Self-assembly of short peptide amphiphiles: the cooperative effect of hydrophobic interaction and hydrogen bonding

The interplay between hydrogen bonding, hydrophobic interaction and the molecular geometry of amino acid side-chains is crucial to the development of nanostructures of short peptide amphiphiles. An important step towards developing their practical use is to understand how different amino acid side-chains tune hydrophobic interaction and hydrogen bonding and how this process leads to the control of the size and shape of the nanostructures. In this study, we have designed and synthesized three sets of short amphiphilic peptides (I(3)K, LI(2)K and L(3)K; L(3)K, L(4)K and L(5)K; I(3)K, I(4)K and I(5)K) and investigated how I and L affected their self-assembly in aqueous solution. The results have demonstrated a strong tendency of I groups to promote the growth of β-sheet hydrogen bonding and the subsequent formation of nanofibrillar shapes. All I(m)K (m = 3-5) peptides assembled into nanofibers with consistent β-sheet conformation, whereas the nanofiber diameters decreased as m increased due to geometrical constraint in peptide chain packing. In contrast, L groups had a weak tendency to promote β-sheet structuring and their hydrophobicity became dominant and resulted in globular micelles in L(3)K assembly. However, increase in the number of hydrophobic sequences to L(5)K induced β-sheet conformation due to the cooperative hydrophobic effect and the consequent formation of long nanofibers. The assembly of L(4)K was, therefore, intermediate between L(3)K and L(5)K, similar to the case of LI(2)K within the set of L(3)K, LI(2)K and I(3)K, with a steady transition from the dominance of hydrophobic interaction to hydrogen bonding. Thus, changes in hydrophobic length and swapping of L and I can alter the size and shape of the self-assembled nanostructures from these simple peptide amphiphiles.     

Chiral cobalt salen complexes containing Lewis acid: A highly reactive and enantioselective catalyst for the hydrolytic kinetic resolution of terminal epoxides

A type of chiral salen complexes bearing Lewis acid, including FeCl₃, AlCl₃, ZnCl₂, and SnCl₄ has been synthesized. The prepared complexes proved to be reactive and enantioselective in the hydrolytic kinetic resolution of terminal epoxides. The catalysts could be recovered and reused several times with simple treatment after reaction, without loss of activity and enantioselectivity. (salen)Co(II) and Lewis acid in mol ratios of 1: 1, 1: 2, and 1: 3 showed the same activity, enatioselectivity, and stability. The characterization of the complexes in-situ generated by the reaction of (salen)Co(II) and Lewis acid in mol ratios of 1: 1, 1: 2, and 1: 3 in CH₂Cl₂ was performed by UV-Vis, which showed an identical spectrum and did not display any change along with the time prolonged. Thus, the present catalysts can be applicable for large scale processes for HKR reaction of racemic epoxides.     

Self-assembly of folic acid derivatives: induction of supramolecular chirality by hierarchical chiral structures

Hierarchical chiral structures made up of dendritic oligo(L- or D-glutamic acid) moieties of folic acid derivatives induce supramolecular chirality in the self-assembled columnar structures of the folic acids. These folic acids self-assemble through the intermolecular hydrogen bonds of the pterin rings to form disklike tetramers. In the neat states, the stacked tetramers form thermotropic hexagonal columnar phases over wide temperature ranges, including room temperature. Addition of alkali metal salts induces chirality in the columnar phases. In dilute solution states in a relatively polar solvent (chloroform), the folic acid derivatives form non-chiral, self-assembled structures. In the presence of sodium triflate, the folic acid forms chiral columnar assemblies through the oligo(L-glutamic acid) moiety, similar to those formed in the liquid-crystalline (LC) states. The enantiomer of the folic acid induces columnar assemblies with reversed helicity. In the case of the diastereomer, no induced helicity is observed. Application of an apolar solvent (dodecane) drives the folic acid derivatives to form chiral assemblies in the absence of ions. In this case, lipophilic interactions promote nanophase segregation, which enhances the formation of chiral columns. Interestingly, the chiral supramolecular structure of the diastereomer induces the most intense circular dichroism. In both cases, the molecular chirality in the oligo(glutamate) moieties yields supramolecular chirality of the folic acids that self-assemble through cooperative molecular interactions.     

New chiral cobalt salen complexes containing Lewis acid BF3; a highly reactive and enantioselective catalyst for the hydrolytic kinetic resolution of epoxides

A new type of chiral cobalt salen complexes bearing BF₃ Lewis acid proved to be reactive and enantioselective in the hydrolytic resolution of terminal epoxides. The polymer type salen catalysts also showed a high enantioselectivity in the same reaction.     

Highly selective hydrolytic kinetic resolution of terminal epoxides catalyzed by chiral (salen)Co(III) complexes. Practical synthesis of enantioenriched terminal epoxides and 1,2-diols

The hydrolytic kinetic resolution (HKR) of terminal epoxides catalyzed by chiral (salen)Co(III) complex 1 x OAc affords both recovered unreacted epoxide and 1,2-diol product in highly enantioenriched form. As such, the HKR provides general access to useful, highly enantioenriched chiral building blocks that are otherwise difficult to access, from inexpensive racemic materials. The reaction has several appealing features from a practical standpoint, including the use of H(2)O as a reactant and low loadings (0.2-2.0 mol %) of a recyclable, commercially available catalyst. In addition, the HKR displays extraordinary scope, as a wide assortment of sterically and electronically varied epoxides can be resolved to > or = 99% ee. The corresponding 1,2-diols were produced in good-to-high enantiomeric excess using 0.45 equiv of H(2)O. Useful and general protocols are provided for the isolation of highly enantioenriched epoxides and diols, as well as for catalyst recovery and recycling. Selectivity factors (k(rel)) were determined for the HKR reactions by measuring the product ee at ca. 20% conversion. In nearly all cases, k(rel) values for the HKR exceed 50, and in several cases are well in excess of 200.     

Mechanistic basis for high reactivity of (salen)Co-OTs in the hydrolytic kinetic resolution of terminal epoxides

The (salen)Co(III)-catalyzed hydrolytic kinetic resolution (HKR) of terminal epoxides is a bimetallic process with a rate controlled by partitioning between a nucleophilic (salen)Co-OH catalyst and a Lewis acidic (salen)Co-X catalyst. The commonly used (salen)Co-OAc and (salen)Co-Cl precatalysts undergo complete and irreversible counterion addition to epoxide during the course of the epoxide hydrolysis reaction, resulting in quantitative formation of weakly Lewis acidic (salen)Co-OH and severely diminished reaction rates in the late stages of HKR reactions. In contrast, (salen)Co-OTs maintains high reactivity over the entire course of HKR reactions. We describe here an investigation of catalyst partitioning with different (salen)Co-X precatalysts and demonstrate that counterion addition to epoxide is reversible in the case of the (salen)Co-OTs. This reversible counterion addition results in stable partitioning between nucleophilic and Lewis acidic catalyst species, allowing highly efficient catalysis throughout the course of the HKR reaction.     

Solvent- and guest-responsive self-assembly of Hamilton receptor tethered bis(merocyanine) dyes

A novel supramolecular building block (8) that consists of a Hamilton receptor and two merocyanine dyes has been synthesized, and the self-assembly based on orthogonal hydrogen bonding and dipolar interactions has been studied in detail. Different self-assembled species, including oligomers, polymers, and inverted micelles could be observed upon variation of the solvent polarity and the concentration. Moreover, this system is highly responsive toward molecular stimuli such as merocyanine molecules with the barbituric acid motif that are bound by the Hamilton receptors. Detailed UV/Vis absorption studies provided insight into isodesmic or cooperative steps during the self-assembly of 8 into different species. The size of the aggregates in solution and the morphology on substrates have been explored by a combination of dynamic light scattering (DLS), atomic force microscopy (AFM), and TEM investigations.     

Self-assembly of tris(2-ureidobenzyl)amines: a new type of capped, capsule-like dimeric aggregates derived from a highly flexible skeleton

A set of tris(2-ureidobenzyl)amines 3 was prepared and their dimerization processes thoroughly investigated. In spite of their inherent flexibility, tris(ureas) 3 form dimeric aggregates both in the solid state and in solution. Evidence for the existence of these dimeric species was provided by a combination of techniques (X-ray analysis, NMR and IR spectroscopy, and ESI-MS). The association constants and thermodynamic parameters for the dimerization processes of selected tris(ureas) were determined and show that they are enthalpically driven. Heterodimerization experiments in solution reveal a high degree of self-recognition or narcissistic self-sorting. On the other hand, desymmetrized tris(ureas) derived from 3 self-assemble with modest regioselectivities depending on the terminal substituent of every urea functionality.     

Phosphate‐Triggered Self‐Assembly of N‐[(Uracil‐5‐yl)methyl]urea: A Minimalistic Urea‐Derived Hydrogelator

N‐[(Uracil‐5‐yl)methyl]urea is reported as a minimalistic low‐molecular‐weight hydrogelator (LMWHG). The unusual phosphate‐induced assembly of this compound has been thoroughly investigated by IR, UV/Vis, and NMR spectroscopy, electron microscopy, and rheological experiments. This rare example of an anion‐triggered urea‐based LMWHG is the first example of a pyrimidine‐ and urea‐containing molecule that can be forced into self‐assembly in aqueous solution without additional aromatic or lipophilic groups. The gelator/phosphate ratio within the hydrogel was successfully determined by ³¹P MAS NMR spectroscopy. The hydrogel exhibits a very fast and repeatable self‐healing property, and remarkable G′ values. The viscoelastic properties of the hydrogel can easily be tuned by variation of the phosphate ratio.     

Stereoregular polycarbonate synthesis: Alternating copolymerization of CO2 with aliphatic terminal epoxides catalyzed by multichiral cobalt(III) complexes

Completely stereoregular polycarbonate synthesis was achieved with the use of unsymmetric multichiral cobalt‐based complexes bearing a derived chiral BINOL and an appended 1,5,7‐triabicyclo[4.4.0] dec‐5‐ene as catalyst for the copolymerization of CO₂ and aliphatic terminal epoxides at mild conditions. The (S,S,S)‐Co(III) complex 1c with sterically hindered substituent group is more stereoregular catalyst for the copolymerization of CO₂ and racemic propylene oxide to afford a perfectly regioregular poly(propylene carbonate) (PPC), with >99% head‐to‐tail linkages, >99% carbonate linkages, and a K_rel of 24.4 for the enchainment of (R)‐epoxide over (S)‐epoxide. The isotactic PPC exhibits an enhanced glass transition temperature of 47 °C, which is 10–12 °C higher than that of the corresponding irregular polycarbonate. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Enantioselective epoxidation with chiral MN(III)(salen) catalysts: kinetic resolution of aryl-substituted allylic alcohols

A set of aryl-substituted allylic alcohols rac-2 has been epoxidized by chiral Mn(salen*) complexes 1 as the catalyst and iodosyl benzene (PhIO) as the oxygen source. Whereas one enantiomer of the allylic alcohol 2 is preferentially epoxidized to give the threo- or cis-epoxy alcohol 3 (up to 80% ee) as the main product (dr up to >95:5), the other enantiomer of 2 is enriched (up to 53% ee). In the case of 1,1-dimethyl-1,2-dihydronaphthalen-2-ol (2c), the CH oxidation to the enone 4c proceeds enantioselectively and competes with the epoxidation. The absolute configurations of the allylic alcohols 2 and their epoxides 3 have been determined by chemical correlation or CD spectroscopy. The observed diastereo- and enantioselectivities in the epoxidation reactions are rationalized in terms of a beneficial interplay between the hydroxy-directing effect and the attack along the Katsuki trajectory.     

Theoretical investigation of gas phase ethanol–(water)n (n = 1–5) clusters and comparison with gas phase pure water clusters (water)n (n = 2–6)

Various properties (such as optimal structures, structural parameters, hydrogen bonds, natural bond orbital charge distributions, binding energies, electron densities at hydrogen bond critical points, cooperative effects, and so on) of gas phase ethanol–(water)_n (n = 1–5) clusters with the change in the number of water molecules have been systematically explored at the MP2/aug‐cc‐pVTZ//MP2/6‐311++G(d,p) computational level. The study of optimal structures shows that the most stable ethanol‐water heterodimer is the one where exists one primary hydrogen bond (O? H…O) and one secondary hydrogen bond (C? H …O) simultaneously. The cyclic geometric pattern formed by the primary hydrogen bonds, where all the molecules are proton acceptor and proton donor simultaneously, is the most stable configuration for ethanol–(water)_n (n = 2–4) clusters, and a transition from two‐dimensional cyclic to three‐dimensional structures occurs at n = 5. At the same time, the cluster stability seems to correlate with the number of primary hydrogen bonds, because the secondary hydrogen bond was extremely weaker than the primary hydrogen bond. Furthermore, the comparison of cooperative effects between ethanol–water clusters and gas phase pure water clusters has been analyzed from two aspects. First of all, for the cyclic structure, the cooperative effect in the former is slightly stronger than that of the latter with the increasing of water molecules. Second, for the ethanol–(water)₅ and (water)₆ structure, the cooperative effect in the former is also correspondingly stronger than that of the latter except for the ethanol–(water)₅ book structure. © 2012 Wiley Periodicals, Inc.     

Poly(styrene)-supported co-salen complexes as efficient recyclable catalysts for the hydrolytic kinetic resolution of epichlorohydrin

Here we describe an unprecedented synthetic approach to poly(styrene)-supported chiral salen ligands by the free radical polymerization of an unsymmetrical styryl-substituted salen monomer (H2salen = bis(salicylidene)ethylenediamine). The new method allows for the attachment of salen moieties to the polymer main chain in a flexible, pendant fashion, avoiding grafting reactions that often introduce ill-defined species on the polymers. Moreover, the loading of the salen is controlled by the copolymerization of the styryl-substituted salen monomer with styrene in different ratios. The polymeric salen ligands are metallated with cobalt(II) acetate to afford the corresponding supported Co-salen complexes, which are used in the hydrolytic kinetic resolution of racemic epichlorohydrin, exhibiting high reactivity and enantioselectivity. Remarkably, the copolymer-supported Co-salen complexes showed a better catalytic performance (>99 % ee, 54 % conversion, one hour) in comparison to the homopolymeric analogues and the small molecule Co-salen complex. The soluble poly(styrene)-supported catalysts were recovered by precipitation after the catalytic reactions and were recycled three times to afford almost identical enantiomeric excesses as the first run, with slightly reduced reaction rates.     

Highly reactive and enantioselective kinetic resolution of terminal epoxides with H2O and HCl catalyzed by new chiral (salen)Co complex linked with Al

The asymmetric hydrolytic kinetic resolution (HKR) of racemic terminal epoxides by new easily synthesized dimeric chiral (salen)Co bearing Al, provides a practical and straightforward method for the synthesis of enantiomerically enriched terminal epoxides (>99% ee) and diols. An inorganic acid, HCl is applied first time for the asymmetric ring opening reaction of terminal epoxides. Reactions are conveniently carried out at room temperature under an air atmosphere.     

Molecular recognition: preorganization of a bis(pyrrole) Schiff base derivative for tight dimerization by hydrogen bonding

Multiple techniques have been used to delineate the self-assembly of a bis(pyrrole) Schiff base derivative (compound 4, C(16)H(14)N(4)), which forms an unusual dimer through complementary N-H...N=C hydrogen bonds between twisted, C2-symmetric monomer units. The asymmetric unit of the crystal structure comprises one and a half dimer units, with one dimer exhibiting approximate D2 point-group symmetry and the other exact D2 symmetry (space group C2/c). The dimers pack into columns whose axes are collinear with the a axis of the unit cell. The columns assemble into discrete layers with two distinct types of hydrogen-sized voids residing between the layers. Despite the promising architecture of the voids within the lattice of 4, the absence of genuine channels to interconnect the voids precludes the uptake of hydrogen gas, even at elevated pressures (10 bar). AM1 calculations of the structure of dimeric 4 indicate that self-recognition through hydrogen bonding depends primarily on favorable electrostatic interactions. The potential-energy surface for monomeric 4 mapped by counter-rotation of an adjacent pair of C=C-N=C torsion angles indicates that the X-ray structures of the four monomeric units are global minima with highly nonplanar conformations that are preorganized for self-recognition by hydrogen bonding. The in vacuo enthalpy of association for the dimer was calculated to be significantly exergonic (DeltaG(assoc)=-21.9 kJ mol(-1), 298 K) and in excellent agreement with that determined by 1H NMR spectroscopy in CDCl3 (DeltaG(assoc)=-16.6(4) kJ mol(-1), 298 K). Using population and bond order analyses, in conjunction with the conformation dependence of the frontier MO energies, we have been able to show that pi-electron delocalization is only marginally diminished in the nonplanar conformers of 4 and that the electronic structures of the constituent monomers of the dimer are well mixed.     

Facile optical resolution of tert-butanethiosulfinate by molecular complexation with (R)-BINOL and study of chiral discrimination of the diastereomeric complexes

An important synthon, tert-butanethiosulfinate (2), has been effectively resolved by forming molecular complexes with (R)-2,2'-dihydroxy-1,1'-binaphthyl (BINOL, 3) in high enantioselectivity (>99 % ee). The present procedure represents the first example of the resolution of thiosulfinate. The mechanism of chiral discrimination is discussed in terms of molecular recognition based on IR and Xray analyses of the diastereomeric complexes during the resolution. In the less-soluble complex, (R)-3 and (R)-2 self-assembled as a linear supramolecule; however, in the more-soluble complex, (R)-3 and (S)-2 formed a simple bimolecular complex by one stronger hydrogen bond. Hydrogen bonding is the major driving force for effective resolution.