Guest exchange dynamics in an M4L6 tetrahedral host

Guest exchange in an M(4)L(6) supramolecular assembly was previously demonstrated to proceed through a nonrupture mechanism in which guests squeeze through apertures in the host structure and not through larger portals created by partial assembly dissociation. Focusing on the [Ga(4)L(6)](12-) assembly [L = 1,5-bis(2',3'-dihydroxybenzamido)naphthalene], the host-guest kinetic behavior of this supramolecular capsule is defined. Guest self-exchange rates at varied temperatures and pressures were measured to determine activation parameters, revealing negative DeltaS and positive DeltaV values [PEt(4)(+): DeltaH = 74(3) kJ mol(-1), DeltaS = -46(6) J mol(-1) K(-1), k(298) = 0.003 s(-)); NEt(4)(+): DeltaH = 69(2) kJ mol(-1), DeltaS = -52(5) J mol(-1) K(-1), k(298) = 0.009 s(-1); NMe(2)Pr(2)(+): DeltaH = 52(2) kJ mol(-1), DeltaS = -56(7) J mol(-1) K(-1), DeltaV = +13(1) cm(3) mol(-1), k(298) = 4.4 s(-1); NPr(4)(+): DeltaH = 42(1) kJ mol(-1), DeltaS = -102(4) J mol(-1) K(-1), DeltaV = +31(2) cm(3) mol(-1), k(298) = 1.4 s(-1)]. In PEt(4)(+) for NEt(4)(+) exchange reactions, egress of the initial guest (G1) is found to be rate determining, with increasing G1 and G2 (the displacing guest) concentrations inhibiting guest exchange. This inhibition is explained by the decreased flexibility of the host imparted by exterior, or exohedral, guest interactions by both the G1 and G2 guests. Blocking the exohedral host sites with high concentrations of the smaller NMe(4)(+) cation (a weak endohedral guest) enhances PEt(4)(+) for NEt(4)(+) guest exchange rates. Finally, guest displacement reactions also demonstrate the sensitivity of guest exchange to thermodynamic endohedral guest binding affinities. When the initial guest (G1) has a weaker affinity for the host, G2 concentration dependence is observed in addition to dependence on the G2 binding strength.     

From Packed “Sandwich” to “Russian Doll”: Assembly by Charge‐Transfer Interactions in Cucurbit[10]uril

As the host possessing the largest cavity in the cucurbit[n]uril (CB[n]) family, CB[10] has previously displayed unusual recognition and assembly properties with guests but much remains to be explored. Herein, we present the recognition properties of CB[10] toward a series of bipyridinium guests including the tetracationic cyclophane known as blue box along with electron‐rich guests and detail the influence of encapsulation on the charge‐transfer interactions between guests. For the mono‐bipyridinium guest (methylviologen, MV ²⁺), CB[10] not only forms 1:1 and 1:2 inclusion complexes, but also enhances the charge‐transfer interactions between methylviologen and dihydroxynaphthalene ( HN ) by mainly forming the 1:2:1 packed “sandwich” complex (CB[10] ? 2 MV ²⁺ ?HN ). For guest 1 with two bipyridinium units, an interesting conformational switching from linear to “U” shape is observed by adding catechol to the solution of CB[10] and the guest. For the tetracationic cyclophane‐blue box, CB[10] forms a stable 1:1 inclusion complex; the two bipyridinium units tilt inside the cavity of CB[10] according to the X‐ray crystal structure. Finally, a supramolecular “Russian doll” was built up by threading a guest through the cavities of both blue box and CB[10].     

Template-assisted ligand encapsulation; the impact of an unusual coordination geometry on a supramolecular pyridylphosphine-Zn(II)porphyrin assembly

The tris(para-pyridyl)phosphine template (1) has been used in conjunction with a series of meso-substituted Zn(II)-tetraphenylporphyrins complexes (2-10) to create supramolecular encapsulated ligand assemblies via Zn-N(pyr) interactions. The structural features of supramolecular ligand 1.[2](3) have been investigated in detail using X-ray crystallography, NMR specroscopy, and UV-vis spectroscopy. The pyridylphosphine-porphyrin stoichiometry determined in solution (1:3) differs markedly with that observed in the solid state (2:5, for assembly [1](2).[2](5)). The difference originates from an unusual coordination behavior of one of the Zn centers, which is octahedrally surrounded through double axial coordination by the pyridyl groups of the two different molecules of 1.     

Hydrophilic Oligo(lactic acid)s Captured by a Hydrophobic Polyaromatic Cavity in Water

Biologically relevant hydrophilic molecules rarely interact with hydrophobic compounds and surfaces in water owing to effective hydration. Nevertheless, herein we report that the hydrophobic cavity of a polyaromatic capsule, formed through coordination‐driven self‐assembly, can encapsulate hydrophilic oligo(lactic acid)s in water with relatively high binding constants (up to K_a=3×10⁵ m ⁻¹). X‐ray crystallographic and ITC analyses revealed that the unusual host–guest behavior is caused by enthalpic stabilization through multiple CH–π and hydrogen‐bonding interactions. The polyaromatic cavity stabilizes hydrolyzable cyclic di(lactic acid) and captures tetra(lactic acid) preferentially from a mixture of oligo(lactic acid)s even in water.     

Assembly of zinc metallacrowns with an a-amino hydroxamic acid ligand

In the assembly of metallacrowns for molecular recognition,luminescence,and molecular magnetism[1_TD$IF]applications,substituting the ring ion can have profound effects on the structure,stability,and physical properties of the inorganic macrocycle.The assembly of Zn(II) metallacrowns with an a-amino hydroxamic acid ligand(phe HA) was investigated to compare the assembly behavior with the well studied metallacrowns containing Cu(II) and Ni(II).Electrospray ionization mass spectrometry reveals that the benchmark species Zn5(phe HA)42+and Ln Zn5(phe HA)53+assemble in pyridine,which is consistent with the behavior of Cu(II) and Ni(II).A Ln Zn4(phe HA)43+species is also observed in a 1:1DMF-pyridine mixture.An unprecedented La(III)[16-MCZn(II),phe HA,Hphe HA-6]5+complex was crystallographically characterized that possesses unusual C2 symmetry.These results provide insights into the design of functional metallacrowns through ring ion substitution.     

Assembly of zinc metallacrowns with an α-amino hydroxamic acid ligand

In the assembly of metallacrowns for molecular recognition, luminescence, and molecular magnetism applications, substituting the ring ion can have profound effects on the structure, stability, and physical properties of the inorganic macrocycle. The assembly of Zn(Ⅱ) metallacrowns with an α-amino hydroxamic acid ligand (pheHA) was investigated to compare the assembly behavior with the well studied metallacrowns containing Cu(Ⅱ) and Ni(Ⅱ). Electrospray ionization mass spectrometry reveals that the benchmark species Zn5(pheHA)42+ and LnZn5(pheHA)53+ assemble in pyridine, which is consistent with the behavior of Cu(Ⅱ) and Ni(Ⅱ). A LnZn4(pheHA)43+ species is also observed in a 1:1 DMF-pyridine mixture. An unprecedented La(Ⅲ)[16-MCZn(Ⅱ),pheHA,HpheHA-6]5+ complex was crystallographically characterized that possesses unusual C2 symmetry. These results provide insights into the design of functional metallacrowns through ring ion substitution.     

A cationic guest in a 24+ cationic host

A new tetrahedral coordination cage M12L6 was prepared from a linear dipyrimidine ligand (L) and cis-protected palladium(II) (M). This cage showed unprecedented host-guest chemistry where the cationic host accommodated a cationic guest despite 24+ charges on the host framework. The unusual cation-cation host-guest chemistry is described by a unique onionlike shell structure of the host-guest complex where two cationic spheres are mediated by an anionic sphere of a counteranion assembly.     

Interwoven 2-D coordination network prepared from the molecular host tris(isonicotinoyl)cyclotriguaiacylene and silver(I) cobalt(III) bis(dicarbollide)

A new 3-fold symmetric molecular host, tris(isonicotinoyl)cyclotriguaiacylene, has been synthesized from cyclotriguaiacylene and isonicotinoyl chloride hydrochloride in 70% yield. Its crystal structure shows dimerization of the host molecules into a capsule-like arrangement. When reacted with Ag[Co(C(2)B(9)H(11))(2)], the host forms a 1-D [ML(2)](n) coordination polymer, which assembles into a 2-D interwoven network through a similar dimerization of the host moieties around acetonitrile guests. Thus, the network structure represents an elegant example whereby the solid state structure of the building blocks is echoed in the resulting supramolecular assembly. The 2-D sheets are further stabilized by pi...pi stacking interactions between pyridyl donors of alternate 1-D coordination polymers.     

Group 1 coordination chains and hexagonal networks of host cyclotriveratrylene with halogenated monocarbaborane anions

Halogenated carbaborane ions [CB(11)H(6)X(6)](-) in which X=Cl or Br have been combined with the host molecule cyclotriveratrylene (CTV) and Group 1 metal cations to give crystalline materials. The complexes [Na(ctv)(H(2)O)(CB(11)H(6)X(6))](CF(3)CH(2)OH) feature chiral Na-CTV coordination chains with complexation of the [CB(11)H(6)X(6)](-) ion by the Na(+) ion, together with the CTV molecular cavity. The coordination chains are hydrogen bonded together to give a puckered two-dimensional hexagonal grid structure. [K(ctv)(CB(11)H(6)Cl(6))(CF(3)CH(2)OH)(0.5)] is essentially isostructural. Complexes [Rb(ctv)(CB(11)H(6)Br(6))(H(2)O)] and [Cs(ctv)(CB(11)H(6)X(6))(CH(3)CN)] are coordination polymers with related distorted hexagonal grid structures. Use of N,N'-dimethylformamide (DMF) as a solvent results in an entirely different type of assembly, with [Na(2)(dmf)(4)(H(2)O)(2)(ctv)][(dmf)(0.5)(ctv)][CB(11)H(6)Br(6)](2) showing unusual [Na-mu-(dmf)-Na] bridges, and once again forming a distorted hexagonal coordination polymer.     

Formation of a Polypseudorotaxane via Self‐Assembly of γ‐Cyclodextrin with Poly(N‐isopropylacrylamide)

A polypseudorotaxane (PPR) comprising γ‐cyclodextrin (γ‐CD) as host molecules and poly(N‐isopropylacrylamide) (PNIPAM) as a guest polymer is prepared via self‐assembly in aqueous solution. Due to the bulky pendant isopropylamide group, PNIPAM exhibits size‐selectivity toward self‐assembly with α‐, β‐, and γ‐CDs. It can fit into the cavity of γ‐CD to give rise to a PPR, but cannot pass through α‐CD and β‐CD under the same conditions. The ratio of the number of γ‐CD molecules to entrapped NIPAM repeat units is kept at 1:2.2 or 1:2.4, determined by ¹H NMR spectroscopy and TGA analysis, respectively, indicating that there are more than 2 but less than 3 NIPAM repeat units included by one γ‐CD molecule. This finding opens new avenues to PPR‐based supramolecular polymers to be used as solid, stimuli‐responsive materials.     

Construction of porphyrin-cyclodextrin self-assembly with molecular wedge

A new host porphyrin bearing four permethyl-beta-cyclodextrin moieties for multi-porphyrin assembly forms a unique 2 : 2 assembly with the tetra-anion of tetrakis(p-sulfonylphenyl)porphyrin (TPPS) in aqueous solution.     

Cytosine: para-sulphonato-calix[4]arene assemblies: in solution, in the solid-state and on the surface of hybrid silver nanoparticles

The molecular recognition by para-sulphonato-calix[4]arene of cytosine, occurs in solution, in the solid-state and by assembly on the surface of para-sulphonato-calix[4]arene capped silver nanoparticles. Each of these states shows different modes of assembly; in solution a 1:1 complex is formed; in the solid state a 4:1 assembly exists, however some of the cytosine molecules are present as space fillers and do not participate in the host (guest complexes, finally on the surface of the hybrid silver/para-sulphonato-calix[4]arene nanoparticles a 2:1 cytosine/para-sulphonato-calix[4]arene assembly is observed. The assembly processes have been studied by DOSY NMR, fluorescence spectroscopy, Dynamic Light Scattering (DLS), Single Crystal Solid State Diffraction, Visible Spectroscopy and Electron Microscopy. The results demonstrate how cytosine initiates the aggregation of the hybrid silver/para-sulphonato-calix[4]arene hybrid nanoparticles.     

Reversible intercalation of large-capacity hemoglobin into in situ prepared titanate interlayers with enhanced thermal and organic medium stabilities

The exfoliated single-layer titanate can rapidly restack and reversibly release heme protein simply by adjustment of the pH value. The composites have regularly layered structure and powdery morphology by their ideal layer-to-layer assembly, which provides the titanate nanosheet an unusual specific intercalation capacity of 5900 mg g(-1) for the protein. The bound and released proteins keep active relative to the intact protein. The hemoglobin thermal and organic solvent stabilities are improved by the protective environment of the titanate host.     

A New Functional Cyclophane Host. Synthesis, Complex Formation and Crystal Structures of Three Inclusion Compounds

A new macrocyclic host compound 2 having an octamethylsubstituted cyclophane structure with two intra-annular carboxylic acid functions has beensynthesized. The properties of crystalline inclusion formation are studied and X-ray crystalstructures of three inclusion complexes including acetic acid, propionic acid and acetone asthe guest molecules are reported. Inter-host channel formation with complexed guest moleculesaccommodated into the channels are typical features of the acetic acid and acetone 1 : 4 (host : guest) stoichiometric complexes being also hydrated species, while the propionicacid 1 : 2 complex is of the close packing type containing no additional water molecules.Systems of hydrogen bonds involving the host and guest functional groups are common toall structures. In the case of the acetic acid inclusion compound, a complex supramolecularhydrogen-bonded array comprising a bordering tricyclic assembly of eight molecular species exists.     

An Evolutionary Strategy for Identification of Higher Order,Green Fluorescent Host–Guest Pairs Compatible with Living Systems

Engineered miniprotein host–small-molecule guest pairs could be utilized to design new processes within cells as well as investigate fundamental aspects of cell signaling mechanisms. However, the development of host–guest pairs capable of functioning in living systems has proven challenging. Moreover, few examples of host–guest pairs with stoichiometries other than 2:1 exist, significantly hindering the ability to study the influence of oligomerization state on signaling fidelity. Herein, we present an approach to identify host–guest systems for relatively small green fluorescent guests by incorporation into cyclic peptides. The optimal host–guest pair produced a 10-fold increase in green fluorescence signal upon binding. Biophysical characterization clearly demonstrated higher order supramolecular assembly, which could be visualized on the surface of living yeast cells using a turn-on fluorescence readout. This work further defines evolutionary design principles to afford host–guest pairs with stoichiometries other than 2:1 and enables the identification of spectrally orthogonal host–guest pairs.     

Anion recognition and anion-mediated self-assembly with thiourea-functionalised fused [3]polynorbornyl frameworks

Three conformationally preorganised host molecules based on the [3]polynorbornyl framework and incorporating di-urea receptors were synthesised and their interaction with a series of anions investigated by (1)H NMR spectroscopy. A high affinity of each host molecule for dihydrogenphosphate (H(2)PO(4)(-)) and dihydrogenpyrophosphate (H(2)P(2)O(7)(2-)) was identified. In addition to binding to the urea receptors of the host molecules, evidence for an interaction involving the non-polar C-H groups within the binding cavity of the framework and guest anions was also discovered. Furthermore, an unusual 2 : 1 host-to-anion stoichiometry was indicated when binding H(2)P(2)O(7)(2-), and a model for the anion-mediated self-assembly of this complex species is proposed.     

Efficient complexation of pyrrole-bridged dizinc(II) bisporphyrin with fluorescent probe pyrene: synthesis, structure, and photoinduced singlet-singlet energy transfer

A diethylpyrrole‐bridged dizinc(II) bisporphyrin (Zn₂DEP) is reported that encapsulates fluorescent probe pyrene molecules through strong π–π interactions, which can relay information about the chemical environment in the interior of the host–guest supramolecular assembly. X‐ray structures of both Zn₂DEP and the encapsulated pyrene complex are reported, which provides a rare opportunity to investigate the structural changes upon guest binding. A comparative structural analysis demonstrated the exceptional ability of this bisporphyrin platform to open its binding pocket for pyrene encapsulation by a vertical displacement of more than 2.45 Å, although both Zn₂DEP and the pyrene complex have nearly parallel porphyrin ring orientations. The ¹H NMR spectrum of the encapsulated pyrene complex in solution shows the upfield shifts of the pyrene protons due to a strong ring current effect, which demonstrates the retention of the solid‐state structure in solution. To further assess the extent to which pyrene guests remain encapsulated in solution, a known fluorescence quencher, dimethylaniline, was added to the host–guest assembly, which shows no exciplex formation for days in nonpolar solvents. Thus, the assembly also retained the structural integrity in solution for a long time. The association constant (K_asso) for such a complexation process in solution was observed to be 1.78×10⁵ M ^?2 for 1:2 binding. Steady‐state fluorescence and lifetime studies indicate significant photoinduced singlet–singlet energy transformation from the excited state of pyrene to zinc bisporphyrin.     

反式七元瓜环与N,N'-二苄基-4,4'-联吡啶氯化物的络合行为研究

利用核磁共振技术、 紫外-可见吸收光谱、 荧光发射光谱、 等温量热滴定及基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)等方法研究了N,N'-二苄基-4,4'-联吡啶氯化物(G1, 客体分子)与反式七元瓜环(iQ[7], 主体分子)的相互作用及形成的主客体包结配合物的结构特征. 结果表明, 客体分子两端的苄基部分分别进入iQ[7]的空腔, 而4,4'-联吡啶则一部分被iQ[7]的空腔所包结, 另一部分处于iQ[7]的端口, 形成包结比为2:1的哑铃型主客体超分子组装体.     

Ion-pairing molecular recognition in water: aggregation at low concentrations that is entropy-driven

Investigations into the thermodynamic parameters that characterize the binding of citrate to tris-guanidinium host 1 in water are reported. The parameters K(a), DeltaH degrees, DeltaS degrees, and DeltaG degrees for the binding event were quantified using isothermal titration calorimetry (ITC) techniques. The 1:1 binding stoichiometry was verified by a Job plot derived from NMR data, and the microcalorimetry data was collected for solutions of 1 and citrate ranging from 1 to 100 mM using phosphate buffer concentrations of 5 and 103 mM. At low buffer concentrations (low ionic strength) complexes with greater than 1:1 stoichiometries were observed by ITC, and K(1) was determined to range from 2.0 x 10(3) to 3.0 x 10(3) M(-1). At higher buffer concentrations (high ionic strength) the higher-order complexes were not detected, and K(1) was determined to be 409 M(-1). The 1:1 association of host 1 and citrate is characterized by a large favorable entropy component and negative enthalpy. However, the complexes with higher-order stoichiometry arise from desolvation processes that result from the association of polyions in aqueous media and is entirely entropy driven. This leads to an unusual observation: the dilution of one component of the host/guest complex leads to the formation of the higher-order complexes. The reason for this observation is discussed.     

沸石中组装SrAl2O4:Eu2+,Dy3+的可调发光现象

首先用溶胶-凝胶法制备符合SrAl2O4：Eu^2 ,Dy^3 化学组成的溶胶,然后通过机械研磨、水热反应和微波加热反应三种不同的组装方法和微波还原扩散法使其进入主体ZSM-5沸石的孔道中。主客体材料的荧光光谱出现显著蓝移,余辉光谱出现400nm和517nm两个发射峰,两个余辉峰的相对发射强度随组装方法和组装浓度的改变而具有可调性,呈现有规律的变化。分析其原因是由于发光材料进入沸石的纳米级孔洞引起的。