用大口径毛细管柱气相色谱法测定蜂蜜中杀虫脒残留量

蜂蜜中杀虫脒残留量用气相色谱－氮磷检测器（ＧＣ－ＮＰＤ）直接测定，色谱柱为ＨＰ－５大口径毛细管柱，方法的回收率为７８．３％～９２．５％，变异系数为４．２％，最低检测限２×１０－９。样品前处理采用了微量化学法。     

鲁米诺-双氧水-铬(Ⅲ)化学发光体系测定化探样品中痕量砷

用鲁米诺－双氧水－铬（Ⅲ）化学发光体系结合巯基棉对Ａｓ（Ⅲ）的富集分离，建立了快速的测定化探样品中痕量砷的新方法，检测线性范围为１．０×１０－４～１．０×１０１ｍｇ／Ｌ，检出限为３．４×１０－５ｍｇ／Ｌ。用于实际化探样品测定，相对标准偏差为５．５％～９．０％。     

液相色谱法测定生物发酵液中水溶性维生素的研究

本文采用反相离子对色谱测定了生物发酵液中的七种水溶性维生素。提出了用自行装填的酸性氧化铝（０．１９～０．１５ｍｍ）前置柱，和５％乙酸洗脱样品的前处理方法；并就有关的色谱条件进行了选择。色谱柱为ＮｏｖａＰａｋＣ１８；流动相Ａ液为０．０５ｍｏｌ／Ｌ庚烷磺酸盐（ＰＩＣＢ７），冰乙酸调ｐＨ＝２．５；Ｂ液为甲醇＋三乙胺（１００＋０．５）；梯度洗脱；ＵＶ２５４ｎｍ、２９０ｎｍ、３６０ｎｍ同时测定。线性范围为０．１～１０μｇ，各种维生素的ＲＳＤ在１．２％～３．０％之间（ＶｉｔａｍｉｎＢ１２除外），回收率大于９０％。     

用毛细管区带电泳技术测定杜仲叶中氯原酸含量的研究

用毛细管区带电泳技术测定杜仲叶中氯原酸含量，方法的相对迁移率为１．４０，回收率在９９．７４％～１０２．０％之间，５次测定的变异系数为０．４５％，满足分析要求，为杜仲叶提取液中氯原酸的测定提供了样品用量少、分析时间短、运行成本低的最新分析方法。     

氢化物发生原子荧光光谱法测定污泥中的砷

用氢化物发生原子荧光光谱法测定污泥中的砷.分别用微波消解、湿法消解两种方法处理污泥样品，微波消解效果优于湿法消解，在最佳实验条件下，砷的检出限为0.04μg/L，回收率为94．2％～104.8％，测定结果的相对标准偏差为2．22％～4．23％。     

测定玻璃体和房水中维拉帕米含量的高效液相色谱法

研究了用ＨＰＬＣ 测定兔眼玻璃体和房水中维拉帕米含量的方法。用丙咪嗪为内标， 采用Ｓｐｈｅｒｉｃａｌ Ｃ１８色谱柱分离， 以甲醇－ ０ ．０４ ｍｏｌ／Ｌ 醋酸铵－ 乙腈－ 二乙胺（ 体积比１ ∶１ ∶０ ．５ ∶０ ．０２） 为流动相， 检测波长为２７８ｎｍ 。样品用正己烷－ 异丁醇提取后进样， 分析速度快。 样品及内标的保留时间分别为４ ．６３ ｍｉｎ 及９ ．２３ ｍｉｎ ； 线性范围为２ ．５ ～１００ ｍｇ／Ｌ， 相关系数ｒ 为０ ．９９９ ７ 。方法的回收率为１００ ．３ ％ （ ｎ ＝ ５） ，ＲＳＤ 为３ ．６３％ ， 日内ＲＳＤ 为０ ．５ ％ ～３ ．６１ ％ ， 日间ＲＳＤ 为３ ．７５ ％ ～４ ．８０ ％ ， 最低检测质量浓度为０．２５ ｍｇ／ Ｌ。 应用该法测定了创伤家兔玻璃体和房水中维拉帕米浓度的变化。     

HPLC法快速测定峰皇浆及制品中添加的维生素B6

本文研究了快速、简便测定蜂皇浆及制品中添加的低含量维生素Ｂ_６的ＨＰＬＣ法。称取适量样品，用１０％偏磷酸提取、净化，清液供ＨＰＬＣ分析用。ＷＡＴＥＲＳ荧光检测器，激发波长２９０ｎｍ，发射波长３９０ｎｍ，ＶＢ_６含量在０～１２０ｎｇ之间工作曲线相关系数大于０．９９９，样品中ＶＢ_６含量为０．１％～５％时，方法回收率为９２．１７％～９８．４２％，相对标准偏差（ｎ＝６）小于３．７％。     

气相色谱法测定化妆品中的 VE 含量

介绍了一种用气相色谱法准确快速测定品中ＶＥ２含量的新方法。该法以ＶＣ作保护剂,用环已烷提取样品,ＳＥＰ－ＰＡＫ ＡＬＵＭ－Ａ小柱净化。以氯氰菊酯内标物,在１？５％ＯＶ＝－１７色谱柱上进行分离,测定化妆口中ＶＥ含量。内标物与样品的分离度为１．５５。平均回收纺为９４．３％～９８．８％,相对标准偏差为１．７％～３．５％（ｎ＝５）。     

火焰原子吸收法测定胃乃安胶囊中铜铅含量

采用干灰化法处理样品，火焰原子吸收光谱法测定胃乃安胶囊中铜、铅含量，用氚灯背景校正，有效地消除了基体干扰，方法的检出限为Ｃｕ：０．０２３ｍｇ／Ｌ，ｐｂ：０．０７０ｍｇ／Ｌ，ＲＳＤ在２．９％～５．６％之间，回收率分别为Ｃｕ：９３％～１０３．６％；ｐｂ：８８．２％～９５．０％。     

微波消解-氢化物发生原子荧光法测定塑料原料及其制品中的砷、汞

采用微波消解进行样品前处理，以硫脲为预还原剂，用氢化物发生原子荧光法测定塑料原料及其制品中的砷、汞。测定砷和汞的线性范围均为0～8μg／L，砷、汞的检出限分别为0．005、0．076μg／L，测定结果的相对标准偏差分别为4.96％～7．38％、2．94％～7．20％(n=6)，回收率分别为92．0％～103．2％、92．0％～98.0％。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.