Adsorption of Nitrogen,Oxygen, and Argon Vapors on Supermicroporous Oxides

The adsorption of N₂, O₂, and Ar vapors on a number of supermicroporous tin dioxide and zirconia xerogels at 77.4 K was studied. The micropore volumes calculated with the use of sorbate densities at the corresponding temperature were found to be in satisfactory agreement for all of the sorbates. At the same time, the volumes of larger pores measured using nitrogen were greater than the values found with other sorbates. The previously found behavior of oxygen and nitrogen molecules in the geometrically restricted space of supermicropores was substantiated. In particular, this behavior manifests itself in a change in the adsorption properties of a unit surface area of supermicropores as compared with the surface of mesopores. However, the effects of this kind were not found for the argon–nitrogen sorbate pair.     

Adsorption of Nitrogen, Oxygen and Argon on Na-CeX Zeolites

Commercial type X zeolites (Linde 13X) are nitrogen selective. Oxygen is the less abundant component in air; hence oxygen selective sorbents are desired for air separation. Mixed Na-Ce type X zeolites containing different ratios of Ce³⁺/Na⁺ ions are prepared by partial ion exchange of commercial X zeolite. The adsorption isotherms of nitrogen, oxygen and argon are measured and the pure-component selectivity ratios are compared and analyzed against commercial zeolites (13X) for air separation. Oxygen selectivity over nitrogen (1.5) and argon (4.0) are seen for mixed Na-Ce type X zeolite (Si/Al = 1.25; Ce³⁺/Na⁺ < 4.0) from Henry's constant determined from low pressure adsorption measurements. The oxygen and nitrogen isotherms cross over for mixed Na-Ce type X zeolite (Si/Al = 1.25; Ce³⁺/Na⁺ < 4.0), and the pressure at which cross they over increases as Ce³⁺/Na⁺ approaches 1. The oxygen selectivity as claimed in the patent by N.V. Choudary, R.V. Jasra, and S.G.T. Bhat (US Patent no. 6,087,289, 2000) is seen only at very low pressures in the volumetric adsorption measurement and the hydrogen treatment of the Ce-exchanged samples have no effect on the adsorption characteristics.     

Adsorption of Hydrocarbon Vapors on Activated Carbons Obtained from Vegetable Raw Materials

The equilibrium adsorption of vapors of benzene, toluene, o-xylene, and gasoline in the temperature range 25-100°C and adsorbate content of 0.01-1.80 vol % on activated carbons obtained from plum stones and shells of peanut, walnut, and coconut was studied. The effect of temperature on the adsorption properties of the absorbents were analyzed. The isosteric heats of adsorption were calculated.     

Chromatographic Separation Study of Gases Containing Argon and Nitrogen and Oxygen

Based on different affinities and different diffusing rates on stationary phases among components, a group of gas chromatographic methods are presented for the separation and analysis of gases containing argon and oxygen and nitrogen at ambient temperature.     

Thermodynamic Description of Excess Isotherms in High-Pressure Adsorption of Methane, Argon and Nitrogen

In the present work the supercritical fluids argon, methane and nitrogen were picked out as examples, and the results of analysis concerning the adsorption of these fluids at activated carbon Norit R1 (Norit company, Germany) and SCS-3 (ISPE, Kiev) at different temperatures up to a pressure of 50 MPa are presented and discussed in this paper. The principle of working of the measuring device is described in this context as well.A three-parameter isothermal equation is used to represent the adsorption equilibrium. The isothermal equation is based on a physical model concept which has already been used for the modelling of adsorption processes with a pressure up to 15 MPa.     

还原态钼铝催化剂上NO的吸附研究

通过对红外光谱及同位素交换反应后的分析 ,证明吸附在还原态钼铝催化剂上的NO是以双亚硝酰基形式存在的     

Surface Chemistry of Polymers Physical Adsorption of Nitrogen,Argon, Sulfur Dioxide and Neopentane on Polyvinylidene Fluoride

The adsorption of nitrogen, argon, sulfur dioxide and neopentane on polyvinylidene fluoride has been measured by static methods and by gas-solid chromatography. The polymer has a homogeneous surface of low energy, which is not significantly affected by heating.     

Nitrous Oxide Adsorption and Decomposition on Zeolites and Zeolite-like Materials

Decomposition of N₂O on modified zeolites, crystalline titanosilicalites, and related amorphous systems is studied by the catalytic and spectroscopic methods. Zinc-containing HZSM-5 zeolites and titanosilicalites with moderate Ti/Si ratios are shown to exhibit a better catalytic performance in N₂O decomposition as compared with conventionally used Cu/HZSM-5 zeolites and amorphous Cu-containing catalysts. Dehydroxylation of the HZSM-5 zeolite by calcination at 1120 K results in an enhancement of the N₂O conversion. The mechanism of the reaction and the role of coordinatively unsaturated cations and Lewis acid sites in N₂O decomposition are discussed on the basis of the spectroscopic data.     

Adsorption of Toluene Vapors on Some Organomontmorillonites

The changes in the surface properties and porous structure of montmorillonite are investigated upon the substitution of tetramethylammonium or pyridinium cations for exchange Na⁺ cations. It is established that preliminary thermal treatment in vacuum substantially affects the adsorption properties of tetramethylammonium and pyridinium montmorillonites in relation to toluene. The dependences of the heats of adsorption and desorption on the amount of adsorbed substance are determined in a wide temperature range using the results of measuring the isosters of toluene adsorption and desorption by dehydrated organomontmorillonites.     

Adsorption of Gases, Vapors and Liquids by Microporous Adsorbents

Adsorption of Xe, Kr, Ar, N₂, O₂, H₂ CH₄, CO₂, He, and freons by PAU-10 and ACC microporous carbon adsorbents as well as by A and X zeolites was investigated over a wide range of pressures (0.1 Pa – 20 MPa) and temperatures (77, 120–600 K). The amount of gases, vapors and liquids adsorbed by microporous adsorbents increases steadily with increasing pressure and does not change dramatically if phase transitions occur in the adsorptive. Isosteres of adsorption constructed as a curve of ln P against f(1/T)_a retain a linear form over a wide range of pressures and temperatures. The slope of isosteres does not vary on going through the critical temperature of the gaseous phase. At high pressures, due to non-ideality of the gaseous phase and non-inert behavior of the adsorbent the differential molar heat of adsorption is dependent on temperature. At high fillings of micropores the differential molar isosteric heat capacities of adsorption systems show maxima that indicate the occurrence of structural rearrangements in the adsorbate.     

Cooperative and Competitive Adsorption of Ethylene,Ethane, Nitrogen and Argon on Graphitized Carbon Black and in Slit Pores

In this paper we investigate the mixture adsorption of ethylene, ethane, nitrogen and argon on graphitized thermal carbon black and in slit pores by means of the Grand Canonical Monte Carlo simulations. Pure component adsorption isotherms on graphitized thermal carbon black are first characterized with the GCMC method, and then mixture simulations are carried out over a wide range of pore width, temperature, pressure and composition to investigate the cooperative and competitive adsorption of all species in the mixture. Results of mixture simulations are compared with the experimental data of ethylene and ethane (Friederich and Mullins, 1972) on Sterling FTG-D5 (homogeneous carbon black having a BET surface area of 13 m²/g) at 298 K and a pressure range of 1.3–93 kPa. Because of the co-operative effect, the Henry constant determined by the traditional chromatography method is always greater than that obtained from the volumetric method.     

丙烯、氧气和环氧丙烷在Cu-NaCl/SiO2催化剂上吸附的红外光谱研究

 用红外光谱法研究了丙烯、丙烯/氧气混合气以及环氧丙烷(PO)在Cu-NaCl/SiO2催化剂上的吸附. 结果表明,丙烯在载体和催化剂上的吸附是完全可逆的. 丙烯和氧气在催化剂上共吸附后生成了丙烯醛,未观察到环氧丙烷(PO)生成. PO在载体和未还原催化剂上的吸附行为表明,PO与载体的硅羟基有强相互作用,PO发生开环反应生成开环物种. 而PO在还原态催化剂上的吸附行为较复杂,可能生成了酮类化合物.     

脉冲熔融-飞行时间质谱法测定金属材料中氧、氮、氢和氩

采用自主研制的脉冲熔融飞行时间质谱法可以固时测定金属中O,N,H和Ar.重点讨论质谱谱线的选择,信号获得以及数据处理和校准,并给出O,N,H和Ar 4种的检出限分别为0.021,0.060,0.002和0.002 μg/g,线性范围分别为0.070～500 μg/g,0.200～400 μg/g,0.006～40 μg...     

Cryogenic Preconcentration of Hydrogen, Argon, Oxygen, and Nitrogen in the Gas Chromatographic Determination of Their Impurities in Volatile Inorganic Hydrides

A procedure is proposed for the cryogenic preconcentration of hydrogen, argon, oxygen, and nitrogen in the gas chromatographic determination of their impurities in volatile inorganic hydrides. It is shown that the recovery of impurity gases approaches 100%. The limits of determination of impurity gases in hydrides with the use of the proposed procedure and a helium ionization detector are 2 × 10^–6–3 × 10^–5mol %, which is 5–100 times lower than the results published previously. The results are given for the determination of hydrogen, argon, oxygen, and nitrogen in silane, germane, arsine, phosphine, hydrogen sulfide, hydrogen selenide, and ammonia samples.     

Composite SiO2—Iron Oxide Materials for Magnetically Intensified Adsorption

Composite SiO₂—iron oxide materials were prepared by three experimental procedures. In the first case, the iron oxides were precipitated during a sol-gel process. In the second case, a SiO₂ matrix was initially obtained, and the iron oxides were formed by thermal treatment after impregnation of a soluble Fe²⁺ salt in the previously processed matrix. In the third method, ferrite powders, prepared by wet chemical method, were embedded into a SiO₂ based sol-gel matrix. Materials with convenient porosity and nano-sized iron oxide content could be prepared using the mentioned methods. The prepared composite has been tested for arsenic(V) removal.     

Adsorption von Argon, Stickstoff und Wasserdampf an Zirkoniumoxid

Ohne Zusammenfassung