Enhancement of CO2 sorption uptake on hydrotalcite by impregnation with K2CO3

The awareness of symptoms of global warming and its seriousness urges the development of technologies to reduce greenhouse gas emissions. Carbon dioxide (CO(2)) is a representative greenhouse gas, and numerous methods to capture and storage CO(2) have been considered. Recently, the technology to remove high-temperature CO(2) by sorption has received lots of attention. In this study, hydrotalcite, which has been known to have CO(2) sorption capability at high temperature, was impregnated with K(2)CO(3) to enhance CO(2) sorption uptake, and the mechanism of CO(2) sorption enhancement on K(2)CO(3)-promoted hydrotalcite was investigated. Thermogravimetric analysis was used to measure equilibrium CO(2) sorption uptake and to estimate CO(2) sorption kinetics. The analyses based on N(2) gas physisorption, X-ray diffractometry, Fourier transform infrared spectrometry, Raman spectrometry, transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy were carried out to elucidate the characteristics of sorbents and the mechanism of enhanced CO(2) sorption. The equilibrium CO(2) sorption uptake on hydrotalcite could be increased up to 10 times by impregnation with K(2)CO(3), and there was an optimal amount of K(2)CO(3) for a maximum equilibrium CO(2) sorption uptake. In the K(2)CO(3)-promoted hydrotalcite, K(2)CO(3) was incorporated without changing the structure of hydrotalcite and it was thermally stabilized, resulting in the enhanced equilibrium CO(2) sorption uptake and fast CO(2) sorption kinetics.     

Molybdenum-molybdenum multiple bonding in homoleptic molybdenum carbonyls: comparison with their chromium analogues

The binuclear molybdenum carbonyls Mo(2)(CO)(n) (n = 11, 10, 9, 8) have been studied by density functional theory using the BP86 and MPW1PW91 functionals. The lowest energy Mo(2)(CO)(11) structure is a singly bridged singlet structure with a Mo-Mo single bond. This structure is essentially thermoneutral toward dissociation into Mo(CO)(6) + Mo(CO)(5), suggesting limited viability similar to the analogous Cr(2)(CO)(11). The lowest energy Mo(2)(CO)(10) structure is a doubly semibridged singlet structure with a Mo═Mo double bond. This structure is essentially thermoneutral toward disproportionation into Mo(2)(CO)(11) + Mo(2)(CO)(9), suggesting limited viability. The lowest energy Mo(2)(CO)(9) structure has three semibridging CO groups and a Mo≡Mo triple bond analogous to the lowest energy Cr(2)(CO)(9) structure. This structure appears to be viable toward CO dissociation, disproportionation into Mo(2)(CO)(10) + Mo(2)(CO)(8), and fragmentation into Mo(CO)(5) + Mo(CO)(4) and thus appears to be a possible synthetic objective. The lowest energy Mo(2)(CO)(8) structure has one semibridging CO group and a Mo≡Mo triple bond similar to that in the lowest energy Mo(2)(CO)(9) structure. This differs from the lowest energy Cr(2)(CO)(8) structure, which is a triply bridged structure. A higher energy unbridged D(2d) Mo(2)(CO)(8) structure was found with a very short Mo-Mo distance of 2.6 ?. This interesting structure has two degenerate imaginary vibrational frequencies. Following the corresponding normal modes leads to a Mo(2)(CO)(8) structure, lying ~5 kcal/mol above the global minimum, with two four-electron donor bridging CO groups and a Mo═Mo distance suggesting a formal double bond. All of the triplet Mo(2)(CO)(n) (n = 10, 9, 8) structures were found to be relatively high energy structures, lying at least 22 kcal/mol above the corresponding global minimum. The singlet-triplet splittings for the Mo(2)(CO)(n) (n = 10, 9, 8) structures are significantly higher than those of the Cr(2)(CO)(n) analogues. The Mo-Mo Wiberg bond indices confirm our assigned bond orders based on predicted bond distances.     

Boronyl ligand as a member of the isoelectronic series BO(-) → CO → NO(+): viable cobalt carbonyl boronyl derivatives?

Recently the first boronyl (oxoboryl) complex [(c-C(6)H(11))(3)P](2)Pt(BO)Br was synthesized. The boronyl ligand in this complex is a member of the isoelectronic series BO(-) → CO → NO(+). The cobalt carbonyl boronyls Co(BO)(CO)(4) and Co(2)(BO)(2)(CO)(7), with cobalt in the formal d(8) +1 oxidation state, are thus isoelectronic with the familiar homoleptic iron carbonyls Fe(CO)(5) and Fe(2)(CO)(9). Density functional theory predicts Co(BO)(CO)(4) to have a trigonal bipyramidal structure with the BO group in an axial position. The tricarbonyl Co(BO)(CO)(3) is predicted to have a distorted square planar structure, similar to those of other 16-electron complexes of d(8) transition metals. Higher energy Co(BO)(CO)(n) (n = 3, 2) structures may be derived by removal of one (for n = 3) or two (for n = 2) CO groups from a trigonal bipyramidal Co(BO)(CO)(4) structure. Structures with a CO group bridging 17-electron Co(CO)(4) and Co(BO)(2)(CO)(3) units and no Co-Co bond are found for Co(2)(BO)(2)(CO)(8). However, Co(2)(BO)(2)(CO)(8) is not viable because of the predicted exothermic loss of CO to give Co(2)(BO)(2)(CO)(7). The lowest lying Co(2)(BO)(2)(CO)(7) structure is a triply bridged (2BO + CO) structure closely related to the experimental Fe(2)(CO)(9) structure. However, other relatively low energy Co(2)(BO)(2)(CO)(7) structures are found, either with a single CO bridge, similar to the experimental Os(2)(CO)(8)(μ-CO) structure; or with 17-electron Co(CO)(4) and Co(BO)(2)(CO)(3) units joined by a single Co-Co bond with or without semibridging carbonyl groups. Both triplet and singlet Co(2)(BO)(2)(CO)(6) structures are found. The lowest lying triplet Co(2)(BO)(2)(CO)(6) structures have a Co(CO)(3)(BO)(2) unit coordinated to a Co(CO)(3) unit through the oxygen atoms of the boronyl groups with a non-bonding ～4.3 ? Co···Co distance. The lowest lying singlet Co(2)(BO)(2)(CO)(6) structures have either two three-electron donor bridging η(2)-μ-BO groups and no Co···Co bond or one such three-electron donor BO group and a formal Co-Co single bond.     

Reactivity of transition metal-phosphorus triple bonds towards triply bonded [{CpMo(CO)2}2]: formation of heteronuclear cluster compounds

Thermolysis of [Cp*P{W(CO)5}2] (1) in the presence of [{CpMo(CO)2}2] leads to the novel complexes [{(CO)2Cp*W}{CpMo(CO)2}(micro,eta2:eta1:eta1-P2{W(CO)5}2)] (6; Cp=eta5-C5H5, Cp*=eta5-C5Me5), [{(micro-O)(CpMoWCp*)W(CO)4}{micro3-PW(CO)5}2] (7), [{CpMo(CO)2}2{Cp*W(CO)2}{micro3-PW(CO)5}] (8) and [{CpMo(CO)2}2{Cp*W(CO)2}(micro3-P)] (9). The structural framework of the main products 8 and 9 can be described as a tetrahedral Mo2WP unit that is formed by a cyclisation reaction of [{CpMo(CO)2}2] with an [Cp*(CO)2W[triple chemical bond]P-->W(CO)5] intermediate containing a W--P triple bond and subsequent metal-metal and metal-phosphorus bond formation. Photolysis of 1 in the presence of [{CpMo(CO)2}2] gives 8, 9 and phosphinidene complex [(micro3-PW(CO)5){CpMo(CO)2W(CO)5}] (10), in which the P atom is in a nearly trigonal-planar coordination environment formed by one {CpMo(CO)2} and two {W(CO)5} units. Comprehensive structural and spectroscopic data are given for the products. The reaction pathways are discussed for both activation procedures, and DFT calculations reveal the structures with minimum energy along the stepwise Cp* migration process under formation of the intermediate [Cp*(CO)2W[triple chemical bond]P-->W(CO)5].     

Factors affecting 13C-natural abundance measurement of breath carbon dioxide during surgery: absorption of carbon dioxide during endoscopic procedures

The aim of this paper is to review the factors which may affect breath (13)CO(2)/(12)CO(2) natural abundance in patients undergoing surgery or intensive care. Intravenous glucose administration is a major determinant of the (13)CO(2)/(12)CO(2) of breath as intravenous glucose preparations are almost all derived from cornstarch. In addition, the oxidation of endogenous substrates can affect the (13)CO(2)/(12)CO(2) ratio. During many endoscopic procedures, such as laparoscopic surgery, carbon dioxide insufflation is used to provide a working space. As medical CO(2) is relatively depleted in (13)CO(2) compared with endogenous and exogenous metabolic CO(2) sources, breath (13)CO(2)/(12)CO(2) measurements can be used to estimate CO(2) absorption during these procedures. However, all these factors may also be affected by the bicarbonate pool, making a definitive attribution of changes in breath (13)CO(2)/(12)CO(2) to a single factor problematic.     

H(2) and CO(2) coadsorption effects in CO adsorption over nanosized Au/gamma-Al(2)O(3) catalysts

The present study is focused on the kinetic investigation of the effects of H(2) and CO(2) on the rates related to the elementary steps of CO sorption over Au/gamma-Al(2)O(3). The kinetic study was carried out in a wide temperature range (50-300 degrees C) by the novel methodology of reversed flow gas chromatography (RF-GC). The findings of preliminary coadsorption studies of CO with H(2), O(2) and O(2)+H(2) indicate that a reductive pre-treatment of the Au catalyst with a mixture of CO in excess of H(2) can be more beneficial concerning CO oxidation activity at low temperatures, compared to the usual reduction in a diluted hydrogen atmosphere, most probably due to the easier activation of oxygen molecules. At high temperatures the rate of reversed water gas shift reaction becomes significant resulting in H(2) and CO(2) consumption. The kinetic findings indicate that hydrogen strongly influences the adsorption of CO over Au/gamma-Al(2)O(3), by enhancing CO adsorption at lower temperatures and weakening the strength CO binding. On the other hand, CO(2) adsorption competes that of CO under hydrogen-rich conditions. However, the strength of CO(2) bonding is higher compared to that of CO and it further increases at higher temperatures, in agreement with the observed deactivation of the selective CO oxidation in the presence of CO(2).     

Manganese carbonyl nitrosyls: comparison with isoelectronic iron carbonyl derivatives

The manganese carbonyl nitrosyls Mn(NO)(CO)4, Mn2(NO)2(CO)n (n = 7, 6, 5, 4), and Mn3(NO)3(CO)9 have been studied by density functional theory (DFT) using the B3LYP and BP86 methods for comparison of their predicted structures with those of isoelectronic iron carbonyl derivatives. DFT predicts a trigonal bipyramidal structure for Mn(NO)(CO)4 with an equatorial NO group very close to the experimental structure. The predicted lowest energy structure for Mn2(NO)2(CO)7 has two bridging NO groups in contrast to the known structure of the isoelectronic Fe2(CO)9, which has three bridging CO groups. The structures for the unsaturated binuclear Mn2(NO)2(CO)n (n = 6, 5, 4) derivatives are similar to those of the corresponding binuclear iron carbonyls Fe2(CO)n+2 derivatives but always with a preference of bridging NO groups over bridging CO groups. The trinuclear Mn3(NO)3(CO)9 is predicted to have a structure analogous to the known structure for Fe3(CO)12 but with two bridging NO groups rather than two bridging CO groups across one of the metal-metal edges of the M3 triangle. The dark red solid photolysis product of Mn(NO)(CO)4 characterized by its nu(CO) and nu(NO) frequencies approximately 45 years ago is suggested by these DFT studies not to be the originally assumed Mn2(NO)2(CO)7 analogous to Fe2(CO)9. Instead, this photolysis product appears to be Mn2(NO)2(CO)5 with a Mn(triple bond)Mn formal triple bond analogous to (eta5-C5H5)2V2(CO)5 obtained from the photolysis of (eta5-C5H5)V(CO)4.     

Spectroscopic detection and theoretical confirmation of the role of Cr2(CO)5(C5R5)2 and .Cr(CO)2(ketene)(C5R5) as intermediates in carbonylation of N=N=CHSiMe3 to O=C=CHSiMe3 by .Cr(CO)3(C5R5) (R = H, CH3)

Conversion of N=N=CHSiMe3 to O=C=CHSiMe3 by the radical complexes .Cr(CO)3C5R5 (R = H, CH3) derived from dissociation of [Cr(CO)3(C5R5)]2 have been investigated under CO, Ar, and N2 atmospheres. Under an Ar or N2 atmosphere the reaction is stoichiometric and produces the Cr[triple bond]Cr triply bonded complex [Cr(CO)2(C5R5)]2. Under a CO atmosphere regeneration of [Cr(CO)3(C5R5)]2 (R = H, CH3) occurs competitively and conversion of diazo to ketene occurs catalytically as well as stoichiometrically. Two key intermediates in the reaction, .Cr(CO)2(ketene)(C5R5) and Cr2(CO)5(C5R5)2 have been detected spectroscopically. The complex .Cr(13CO)2(O=13C=CHSiMe3)(C5Me5) has been studied by electron spin resonance spectroscopy in toluene solution: g(iso) = 2.007; A(53Cr) = 125 MHz; A(13CO) = 22.5 MHz; A(O=13C=CHSiMe3) = 12.0 MHz. The complex Cr2(CO)5(C5H5)2, generated in situ, does not show a signal in its 1H NMR and reacts relatively slowly with CO. It is proposed to be a ground-state triplet in keeping with predictions based on high level density functional theory (DFT) studies. Computed vibrational frequencies are also in good agreement with experimental data. The rates of CO loss from 3Cr2(CO)5(C5H5)2 producing 1[Cr(CO)2(C5H5)]2 and CO addition to 3Cr2(CO)5(C5H5)2 producing 1[Cr(CO)3(C5H5)]2 have been measured by kinetics and show DeltaH approximately equal 23 kcal mol(-1) for both processes. Enthalpies of reduction by Na/Hg under CO atmosphere of [Cr(CO)n(C5H5)]2 (n = 2,3) have been measured by solution calorimetry and provide data for estimation of the Cr[triple bond]Cr bond strength in [Cr(CO)2(C5H5)]2 as 72 kcal mol(-1). The complex [Cr(CO)2(C5H5)]2 does not readily undergo 13CO exchange at room temperature or 50 degrees C implying that 3Cr2(CO)5(C5H5)2 is not readily accessed from the thermodynamically stable complex [Cr(CO)2(C5H5)]2. A detailed mechanism for metalloradical based conversion of diazo and CO to ketene and N2 is proposed on the basis of a combination of experimental and theoretical data.     

CO2在金属表面活化的能学方法研究

应用UBI-QEP方法, 估算了CO2-在金属表面的吸附热, 并计算了CO2在Cu(111)、Pd(111)、Fe(111)、Ni(111)表面的各种反应途径的活化能垒. 结果表明, CO2-在4种过渡金属表面相对的稳定性和CO2解离吸附的活性顺序一致,均为Fe>Ni>Cu>Pd. 说明CO2-可能是CO2解离吸附的关键中间体. 在Cu、Pd、Ni表面上, CO2解离吸附的最终产物是CO,而在Fe表面其最终会解离成C和O. 在Cu、Fe、Ni表面, CO2加氢活化是一种有效模式, 而在Pd上则不容易进行. 在Cu和Pd表面,碳酸盐物种也可能是CO2活化的重要中间体.     

Versatile behavior of the fluorophosphinidene ligand in iron carbonyl chemistry

Fluorophosphinidene (PF) is a versatile ligand found experimentally in the transient species M(CO)(5)(PF) (M = Cr, Mo) as well as the stable cluster Ru(5)(CO)(15)(μ(4)-PF). The PF ligand can function as either a bent two-electron donor or a linear four-electron donor with the former being more common. The mononuclear tetracarbonyl Fe(PF)(CO)(4) is predicted to have a trigonal bipyramidal structure analogous to Fe(CO)(5) but with a bent PF ligand replacing one of the equatorial CO groups. The tricarbonyl Fe(PF)(CO)(3) is predicted to have two low-energy singlet structures, namely, one with a bent PF ligand and a 16-electron iron configuration and the other with a linear PF ligand and the favored 18-electron iron configuration. Low-energy structures of the dicarbonyl Fe(PF)(CO)(2) have bent PF ligands and triplet spin multiplicities. The lowest energy structures of the binuclear Fe(2)(PF)(CO)(8) and Fe(2)(PF)(2)(CO)(7) derivatives are triply bridged structures analogous to the experimental structure of the analogous Fe(2)(CO)(9). The three bridges in each Fe(2)(PF)(CO)(8) and Fe(2)(PF)(2)(CO)(7) structure include all of the PF ligands. Other types of low-energy Fe(2)(PF)(2)(CO)(7) structures include the phosphorus-bridging carbonyl structure (FP)(2)COFe(2)(CO)(6), lying only ~2 kcal/mol above the global minimum, as well as an Fe(2)(CO)(7)(μ-P(2)F(2)) structure in which the two PF groups have coupled to form a difluorodiphosphene ligand unsymmetrically bridging the central Fe(2) unit.     

Binuclear vanadium carbonyls: the limits of the 18-electron rule

The fact that the stable mononuclear vanadium carbonyl V(CO)6 fails to satisfy the 18-electron rule has led to an investigation of the binuclear vanadium carbonyls V2(CO)n (n = 10-12) using methods from density functional theory. There are several important experimental studies of these homoleptic binuclear vanadium carbonyls. The global minimum for V2(CO)12 is a singlet structure having two V(CO)6 units linked by a long V-V single bond (3.48 A by B3LYP or 3.33 A by BP86) without any bridging CO groups. For V2(CO)11 the global minimum is a singlet structure V2(CO)10(eta2-mu-CO) with a four-electron pi-donor bridging CO group. For V2(CO)10 the global minimum is an unsymmetrical singlet (OC)4VV(CO)6 structure with three semibridging CO groups and a V-V distance of 2.54 A (B3LYP) or 2.51 A (BP86), suggesting a VV triple bond. The theoretical nu(CO) frequencies of this V2(CO)10 isomer agree approximately with those assigned by Ishikawa et al. (J. Am. Chem. Soc. 1987, 109, 6644) to a V2(CO)10 isomer produced in the photolysis of gas-phase V(CO)6. In contrast, the laboratory bridging nu(CO) frequency assigned to V2(CO)12 by Ford et al. (Inorg. Chem. 1976, 15, 1666) seems more likely to arise from the lowest-lying triplet isomer of V2(CO)11.     

Hexanuclear cobalt carbonyl carbide clusters: the interplay between octahedral and trigonal prismatic structures

The six-vertex cobalt carbonyl clusters [Co6C(CO)n](2-) (n = 12, 13, 14, 15, 16) with an interstitial carbon atom have been studied by density functional theory (DFT). These DFT studies indicate that the experimentally known structure of [Co6C(CO)15](2-) consisting of a Co6 trigonal prism with each of its edges bridged by carbonyl groups is a particularly stable structure lying more than 20 kcal/mol below any other [Co6C(CO)15](2-) structure. Addition of a CO group to this [Co6C(CO)15](2-) structure gives the lowest energy [Co6C(CO)16](2-) structure, also a Co6 trigonal prism with one of the vertical edges bridged by two CO groups and the remaining eight edges each bridged by a single CO group. However, this [Co6C(CO)16](2-) structure is thermodynamically unstable with respect to CO loss reverting to the stable trigonal prismatic [Co6C(CO)15](2-). This suggests that 15 carbonyl groups is the maximum that can be attached to a Co6C skeleton in a stable compound. The lowest energy structure of [Co6C(CO)14](2-) has a highly distorted octahedral Co6 skeleton and is thermodynamically unstable with respect to disproportionation to [Co6C(CO)15](2-) and [Co6C(CO)13](2-). The lowest energy [Co6C(CO)13](2-) structure is very similar to a known stable structure with an octahedral Co6 skeleton. The lowest energy [Co6C(CO)12](2-) structure is a relatively symmetrical D3d structure containing a carbon-centered Co6 puckered hexagon in the chair form.     

Growth dynamics and intracluster reactions in Ni+(CO2)n complexes via infrared spectroscopy

Ni(+)(CO(2))(n), Ni(+)(CO(2))(n)Ar, Ni(+)(CO(2))(n)Ne, and Ni(+)(O(2))(CO(2))(n) complexes are generated by laser vaporization in a pulsed supersonic expansion. The complexes are mass-selected in a reflectron time-of-flight mass spectrometer and studied by infrared resonance-enhanced photodissociation (IR-REPD) spectroscopy. Photofragmentation proceeds exclusively through the loss of intact CO(2) molecules from Ni(+)(CO(2))(n) and Ni(+)(O(2))(CO(2))(n) complexes, and by elimination of the noble gas atom from Ni(+)(CO(2))(n)Ar and Ni(+)(CO(2))(n)Ne. Vibrational resonances are identified and assigned in the region of the asymmetric stretch of CO(2). Small complexes have resonances that are blueshifted from the asymmetric stretch of free CO(2), consistent with structures having linear Ni(+)-O=C=O configurations. Fragmentation of larger Ni(+)(CO(2))(n) clusters terminates at the size of n=4, and new vibrational bands assigned to external ligands are observed for n> or =5. These combined observations indicate that the coordination number for CO(2) molecules around Ni(+) is exactly four. Trends in the loss channels and spectra of Ni(+)(O(2))(CO(2))(n) clusters suggest that each oxygen atom occupies a different coordination site around a four-coordinate metal ion in these complexes. The spectra of larger Ni(+)(CO(2))(n) clusters provide evidence for an intracluster insertion reaction assisted by solvation, producing a metal oxide-carbonyl species as the reaction product.     

Hydrogenation of benzaldehyde and cinnamaldehyde in compressed CO2 medium with a Pt/C catalyst: a study on molecular interactions and pressure effects

The hydrogenation of benzaldehyde and cinnamaldehyde has been studied with a 5% Pt/C catalyst in compressed CO(2). The effect of CO(2) pressure on the total conversion was found to be different between the two aldehydes. The total conversion of benzaldehyde merely decreases with increasing CO(2) pressure, while that of cinnamaldehyde shows a maximum at a certain pressure. High-pressure FTIR measurements indicate the existence of interactions of CO(2) with the aldehydes. The absorption of nu(C=O) red-shifts at increasing CO(2) pressure, and this red-shift is more significant for cinnamaldehyde than for benzaldehyde, indicating that the C=O bond of the former becomes more reactive than the latter. The difference in the mode of interactions of CO(2) with these aldehydes has also been indicated by changes of nu(C=O) of CO(2). Thus, the conversion of benzaldehyde will decrease with increasing CO(2) pressure because of a simple dilution by introducing a larger quantity of CO(2). For cinnamaldehyde, the conversion will increase at low pressures because of increasing interactions with CO(2) molecules (increasing the reactivity of the C=O bond) but decrease at high pressures because of the simple dilution effect, similar to the case of benzaldehyde. The dense CO(2) molecules are not likely to change the catalytic activity of supported Pt particles, which was previously suggested from optical absorption of supported fine metal (Au) particles in a compressed CO(2) medium.     

Synthesis, Characterization, and Comparative Properties of [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)] and [PPN](2)[Re(6)C(CO)(18)Ru(CO)(3)

The reaction of [PPN](2)[Re(6)C(CO)(19)] with Mo(CO)(6) and Ru(3)(CO)(12) under sunlamp irradiation provided the new mixed-metal clusters [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)] and [PPN](2)[Re(6)C(CO)(18)Ru(CO)(3)], which were isolated in yields of 85% and 61%, respectively. The compound [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)] crystallizes in the monoclinic space group P2(1)/c with a = 20.190 (7) ?, b = 16.489 (7) ?, c = 27.778 (7) ?, beta = 101.48 (2) degrees, and Z = 4 (at T = -75 degrees C). The cluster anion is composed of a Re(6)C octahedral core with a face capped by a Mo(CO)(4) fragment. There are three terminal carbonyl ligands coordinated to each rhenium atom. The four carbonyl ligands on the molybdenum center are essentially terminal, with one pair of carbonyl ligands (C72-O72 and C74-O74) subtending a relatively large angle at molybdenum (C72-Mo-C74 = 147.2(9) degrees ), whereas the remaining pair of carbonyl ligands (C71-O71 and C73-O73) subtend a much smaller angle (C71-Mo-C73 = 100.5(9) degrees ). The (13)C NMR spectrum of (13)CO-enriched [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)] shows signals for four sets of carbonyl ligands at -40 degrees C, consistent with the solid state structure, but the carbonyl ligands undergo complete scrambling at ambient temperature. The (13)C NMR spectrum of (13)CO-enriched [PPN](2)[Re(6)C(CO)(18)Ru(CO)(3)] at 20 degrees C is consistent with the expected structure of an octahedral Re(6)C(CO)(18) core capped by a Ru(CO)(3) fragment. The visible spectrum of [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)] shows a broad, strong band at 670 nm (epsilon = 8100), whereas all of the absorptions of [PPN](2)[Re(6)C(CO)(18)Ru(CO)(3)] are at higher energy. An irreversible oxidation wave with E(p) at 0.34 V is observed for [PPN](2)[Re(6)C(CO)(18)Mo(CO)(4)], whereas two quasi-reversible oxidation waves with E(1/2) values of 0.21 and 0.61 V (vs Ag/AgCl) are observed for [PPN](2)[Re(6)C(CO)(18)Ru(CO)(3)]. The molybdenum cap in [Re(6)C(CO)(18)Mo(CO(4))](2-) is cleaved by heating in donor solvents, and by treatment with H(2), to give largely [H(2)Re(6)C(CO)(18)](2-). In contrast, [Re(6)C(CO)(18)Ru(CO)(3)](2-) shows no tendency to react under similar conditions.     

Metal carbonyls as pharmaceuticals? [Ru(CO)3Cl(glycinate)], a CO-releasing molecule with an extensive aqueous solution chemistry

The pharmacologically active [Ru(CO)(3)Cl(glycinate)] is shown to be in equilibrium with [Ru(CO)(2)(CO(2)H)Cl(glycinate)](-) (isomers) at around pH 3.1 which then at physiological pH reacts with more base to give [Ru(CO)(2)(CO(2))Cl(glycinate)](2-) (isomers) or [Ru(CO)(2)(CO(2)H)(OH)(glycinate)](-) (isomers). The ease with which [Ru(CO)(3)Cl(glycinate)] reacts with hydroxide results in it producing a solution in water with a pH of around 2 to 2.5 depending on concentration and making its solutions more acidic than those of acetic acid at comparable concentrations. Acidification of [Ru(CO)(3)Cl(glycinate)] with HCl gives [Ru(CO)(3)Cl(2)(NH(2)CH(2)CO(2)H)]. The crystal structures of [Ru(CO)(3)Cl(glycinate)] and [Ru(CO)(3)Cl(2)(NH(2)CH(2)CO(2)Me)] are reported.     

Molecular orbitals of the oxocarbons (CO)n, n = 2-6. Why does (CO)4 have a triplet ground state?

Cyclobutane-1,2,3,4-tetrone has been both predicted and found to have a triplet ground state, in which a b(2g) σ MO and an a(2u) π MO are each singly occupied. The nearly identical energies of these two orbitals of (CO)(4) can be attributed to the fact that both of these MOs are formed from a bonding combination of C-O π* orbitals in four CO molecules. The intrinsically stronger bonding between neighboring carbons in the b(2g) σ MO compared to the a(2u) π MO is balanced by the fact that the non-nearest-neighbor, C-C interactions in (CO)(4) are antibonding in b(2g), but bonding in a(2u). Crossing between an antibonding, b(1g) combination of carbon lone-pair orbitals in four CO molecules and the b(2g) and a(2u) bonding combinations of π* MOs is responsible for the occupation of the b(2g) and a(2u) MOs in (CO)(4). A similar orbital crossing occurs on going from two CO molecules to (CO)(2), and this crossing is responsible for the triplet ground state that is predicted for (CO)(2). However, such an orbital crossing does not occur on formation of (CO)(2n+1) from 2n + 1 CO molecules, which is why (CO)(3) and (CO)(5) are both calculated to have singlet ground states. Orbital crossings, involving an antibonding, b(1), combination of lone-pair MOs, occur in forming all (CO)(2n) molecules from 2n CO molecules. Nevertheless, (CO)(6) is predicted to have a singlet ground state, in which the b(2u) σ MO is doubly occupied and the a(2u) π MO is left empty. The main reason for the difference between the ground states of (CO)(4) and (CO)(6) is that interactions between 2p AOs on non-nearest-neighbor carbons, which stabilize the a(2u) π MO in (CO)(4), are much weaker in (CO)(6), due to the much larger distances between non-nearest-neighbor carbons in (CO)(6) than in (CO)(4).     

A solid molecular basket sorbent for CO2 capture from gas streams with low CO2 concentration under ambient conditions

In this paper, a solid molecular basket sorbent, 50 wt% PEI/SBA-15, was studied for CO(2) capture from gas streams with low CO(2) concentration under ambient conditions. The sorbent was able to effectively and selectively capture CO(2) from a gas stream containing 1% CO(2) at 75 °C, with a breakthrough and saturation capacity of 63.1 and 66.7 mg g(-1), respectively, and a selectivity of 14 for CO(2)/CO and 185 for CO(2)/Ar. The sorption performance of the sorbent was influenced greatly by the operating temperature. The CO(2)-TPD study showed that the sorbent could be regenerated under mild conditions (50-110 °C) and was stable in the cyclic operations for at least 20 cycles. Furthermore, the possibility for CO(2) capture from air using the PEI/SBA-15 sorbent was studied by FTIR and proved by TPD. A capacity of 22.5 mg g(-1) was attained at 75 °C via a TPD method using a simulated air with 400 ppmv CO(2) in N(2).     

Electronic sputtering produced by fission fragments on condensed CO and CO2

Condensed CO and CO2 are bombarded by approximately 65 MeV 252Cf fission fragments and the desorbed ions are analyzed by time-of-flight mass spectrometry as a function of target temperature, in the ranges 25-33 K and 75-91 K, respectively. Absolute desorption yields are measured up to complete ice sublimation. The mass spectra of both ice targets reveal the emission of: (1) low mass ions, produced by direct Coulomb interaction of the highly charged projectiles and delta-electrons with CO and CO2, and (2) pronounced series of cluster ions. The basic ice cluster structures (CO)n and (CO2)n are present in the emitted cluster series such as (CO)nCO+, (CO2)nCO2+, or (CO2)nCO3-. In the case of CO ice, however, the intense production of the series Cn+, Cn-, and (CO)mCn+ shows that Cn is the main cluster structure, consequence of a higher concentration of free carbon atoms in the nuclear track plasma of CO ice than in that of CO2 ice. Ion cluster abundance is observed to decrease exponentially with cluster mass. The decay constant is k(n) congruent with 0.13, about the same for series based on (CO)n and (CO2)n, but a factor 3.3 higher for the Cn series. The Cn clusters are formed by gas-phase condensation, but the (CO)n and (CO2)n clusters are produced by fracturing of the highly excited solid around the nuclear track. A dramatic reduction of the ion desorption yield is observed near T = 29 K for CO and near T = 85 K for CO2, when fast sublimation occurs and ice thickness vanishes. Close to sublimation temperature, the decay constant of the (CO)2Cn+ series increases due to a decreasing formation probability of large Cn clusters.     

Surface dependence of CO2 adsorption on Zn2GeO4

An understanding of the interaction between Zn(2)GeO(4) and the CO(2) molecule is vital for developing its role in the photocatalytic reduction of CO(2). In this study, we present the structure and energetics of CO(2) adsorbed onto the stoichiometric perfectly and the oxygen vacancy defect of Zn(2)GeO(4) (010) and (001) surfaces using density functional theory slab calculations. The major finding is that the surface structure of the Zn(2)GeO(4) is important for CO(2) adsorption and activation, i.e., the interaction of CO(2) with Zn(2)GeO(4) surfaces is structure-dependent. The ability of CO(2) adsorption on (001) is higher than that of CO(2) adsorption on (010). For the (010) surface, the active sites O(2c)···Ge(3c) and Ge(3c)-O(3c) interact with the CO(2) molecule leading to a bidentate carbonate species. The presence of Ge(3c)-O(2c)···Ge(3c) bonds on the (001) surface strengthens the interaction of CO(2) with the (001) surface, and results in a bridged carbonate-like species. Furthermore, a comparison of the calculated adsorption energies of CO(2) adsorption on perfect and defective Zn(2)GeO(4) (010) and (001) surfaces shows that CO(2) has the strongest adsorption near a surface oxygen vacancy site, with an adsorption energy -1.05 to -2.17 eV, stronger than adsorption of CO(2) on perfect Zn(2)GeO(4) surfaces (E(ads) = -0.91 to -1.12 eV) or adsorption of CO(2) on a surface oxygen defect site (E(ads) = -0.24 to -0.95 eV). Additionally, for the defective Zn(2)GeO(4) surfaces, the oxygen vacancies are the active sites. CO(2) that adsorbs directly at the Vo site can be dissociated into CO and O and the Vo defect can be healed by the oxygen atom released during the dissociation process. On further analysis of the dissociative adsorption mechanism of CO(2) on the surface oxygen defect site, we concluded that dissociative adsorption of CO(2) favors the stepwise dissociation mechanism and the dissociation process can be described as CO(2) + Vo → CO(2)(δ-)/Vo → CO(adsorbed) + O(surface). This result has an important implication for understanding the photoreduction of CO(2) by using Zn(2)GeO(4) nanoribbons.