Effect of Mn(II) ions on the growth of ammonium oxalate monohydrate crystals from aqueous solutions: II. Growth kinetics

The experimental results of the effect of concentration of Mn(II) ions on the growth kinetics of different faces of ammonium oxalate monohydrate single crystals from aqueous solutions at a constant temperature and different predefined supersaturations are described and discussed. It was observed that: (1) at a given supersaturation σ, Mn(II) ions lead to a decrease in the growth rates of different faces of AO crystals, (2) the growth of a particular face of the crystals occurs above a critical supersaturation σ_d but there is also another supersaturation barrier σ* when the rate abruptly increases with σ, (3) the values of σ_d and σ* increase with increasing concentration of the impurity, and (4) the values of σ_d depend on the growth kinetics of a face but those of σ* are independent of face growth kinetics. The experimental R(σ) data for different Mn(II) concentrations c_i were analysed according to the model involving complex source of cooperating screw dislocations and concepts of instantaneous and time‐dependent impurity adsorption. It was found that: (1) for a given face the differential heat of adsorption Q_diff is higher during instantaneous impurity adsorption than that during time‐dependent adsorption, and (2) the values of Q_diff involved during instantaneous adsorption are related with face growth kinetics but those during time‐dependent adsorption are independent of face growth kinetics.     

Growth kinetics of ammonium oxalate monohydrate single crystals from aqueous solutions containing Co(II) and Ni(II) impurities

The growth kinetics of different faces of ammonium oxalate monohydrate (AO) single crystals from aqueous solutions containing different concentrations of Co(II) and Ni(II) ions at a constant temperature are described and discussed. It was found that: (1) at a given supersaturation σ, both Co(II) and Ni(II) ions lead to a decrease in the growth rates R of different faces of AO crystals, (2) the growth of a particular face of the crystals occurs above a critical supersaturation σ_d, but there is also another supersaturation barrier σ* when the rate abruptly increases with σ, and (3) the values of σ_d and σ* increase with increasing concentration c_i of the impurity. The experimental R(σ) data for different concentrations c_i of the impurities were analysed according to the model involving complex source of cooperating screw dislocations and concepts of instantaneous and time‐dependent impurity adsorption. Analysis of the data showed that: (1) adsorption of Co(II) and Ni(II) impurities occurs on the surface terrace of AO crystals, (2) there is a simple relationship between Langmuir constant K and the impurity concentration c_i* corresponding to maximum surface coverage, and (3) the ratio σ_d/σ* of the supersaturation barriers observed in the presence of both impurities increases with an increase in impurity concentration c_i, and may be explained from the standpoint of the mechanism of adsorption of impurity particles at kinks and ledges. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

In situ study of growth and dissolution kinetics of ammonium oxalate monohydrate single crystals from aqueous solutions containing cationic impurities

The results of an in situ investigation of the effect of four different bi‐ and trivalent cations (Fe(III), Cu(II), Mn(II) and Cr(III)) on the displacement velocity of individual growth steps on the (110) face of ammonium oxalate monohydrate crystals as a function of supersaturation are described and discussed. It was observed that: (1) at a particular temperature of pure solutions and solutions containing impurities, the velocity v of movement of the [110] growth steps is always greater than that of the [111] steps, (2) fluctuations in the velocity of individual growth steps occur in all solutions containing similar concentrations of different impurities, (3) the value of kinetic coefficient β for growth steps decreases with an increase in the concentration c_i of Cu(II) impurity, but that for dissolution steps does not depend on c_i; moreover, the value of kinetic coefficient β for growth steps is higher than that of dissolution steps, and (4) in the presence of Mn(II) and Cr(III) impurities, the kinetic coefficient β for dissolution steps is several times greater than that for growth steps. The results are explained from the standpoint of Kubota‐Mullin model of adsorption of impurities at kinks in the steps and the stability of dominating complexes present in solutions. Analysis of the results revealed that: (1) the effectiveness of different impurities in inhibiting growth increases in the order: Fe(III), Cu(II), Mn(II), and Cr(III), and this behavior is directly connected with the stability and chemical constitution of dominating complexes in saturated solutions, (2) fluctuations in the velocity of growth steps is associated with the effectiveness of an impurity for adsorption; the stronger the adsorption of an impurity, the higher is the fluctuation in step velocity v, and (3) depending on the nature of the impurity, the kinetic coefficient for the dissolution steps can remain unchanged or can be higher than that of the growth steps. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of cationic impurities on solubility and crystal growth processes of ammonium oxalate monohydrate: Role of formation of metal‐oxalate complexes

The effect of different bi‐ and trivalent cationic impurities on the solubility of ammonium oxalate and the composition and distribution of chemical complexes formed in saturated ammonium oxalate aqueous solutions as a function of impurity concentration are investigated. The knowledge of the composition and stability of complexes formed in saturated aqueous solutions is then employed to explain the appearance of dead zones of supersaturation for growth and the difference in the effective segregation coefficient of the impurities. Analysis of the experimental results revealed that: (1) at a constant temperature, the dependence of concentration of complex species formed in saturated solutions on the concentration of different impurities can be described by an equation similar to that of the concentration dependence of density of solutions, (2) the dominant metal‐containing species present in saturated solutions are negatively‐charged, most stable oxalato complexes like Cu(C₂O₄)₂²⁻, Mn(C₂O₄)₃⁴⁻, Zn(C₂O₄)₃⁴⁻, Cr(C₂O₄)₃³⁻ and Fe(C₂O₄)₃³⁻, (3) in the investigated range of impurity concentration, the solubility of ammonium oxalates increases linearly with the concentration of all impurities and the increase is associated with the stability of dominant complexes, (4) appearance of dead supersaturation zones in the presence of impurities is associated with instantaneous adsorption of all growth sites by dominant oxalato complexes in relatively short adsorption time, and (5) the segregation coefficient of an impurity cation M of charge z + increases with a decrease in the solubility product constant K_sp for the hydrolysis products of reactions of the type: M^{z +} ↔ M₁^{(z −1)+} + H⁺ (where the cation M has z + charge, and H⁺ is hydrogen ion). (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

On the dimensions of species participating in the growth of ammonium oxalate monohydrate crystals from viscosity data of concentrated aqueous solutions

The experimental data of the temperature and concentration dependence of viscosity of concentrated aqueous ammonium oxalate solutions are analysed using the hole theory of liquids and Einstein's model of viscosity. Analysis of the data revealed that the dimensions of the species participating in the growth of ammonium oxalate monohydrate crystals are 3‐5 times larger than the dimensions of individual NH₄⁺ and C₂O₄^2‐ ions composing them. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Investigation of metastable zone width of ammonium oxalate aqueous solutions

The metastable zone width of pure ammonium oxalate aqueous solutions, as represented by maximum supercooling ΔT_max, is investigated as functions of cooling rate R and saturation temperature T₀ by the polythermal method. The experimental results are discussed by using two recently advanced approaches: (1) self‐consistent Nývlt‐like approach based on a power‐law relationship between nucleation rate J and maximum supersaturation lnS_max, and (2) a novel approach based on the relationship between J and lnS_max described by the classical three‐dimensional nucleation theory. Analysis of the experimental data revealed that both approaches describe the experimental data on metastable zone width by the polythermal method reliably and provide useful information about the physical processes and parameters involved in nucleation kinetics. The values of various physical quantities predicted by both of these approaches are reasonable for a fairly‐soluble compound. A careful examination of the data on ΔT_max as a function of T₀ obtained by polythermal method and from density measurements showed that ΔT_max has a slight tendency to decrease with increasing saturation temperature T₀. The values of lnS_max at saturation temperature 303 K suggest that the metastable zone width of ammonium oxalate aqueous solutions is determined by primary nucleation in the polythermal method and by secondary nucleation during density measurements. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

On the origin of supersaturation barriers during the growth of single crystals from aqueous solutions containing impurities – a review

A generalised treatment of the appearance of supersaturation barriers σ_d, σ* and σ** during the growth of single crystals is outlined from the standpoint of well‐defined critical values of relative step velocities on a face. The final theoretical expressions are based on the premise that: (1) there are critical values of the relative step velocities associated with different average distances between adsorbed impurity particles during instantaneous, time‐dependent and time‐independent adsorption of the impurity on the growing surface, (2) the growth rate of a face is proporptional to velocity of steps on the growing face, and (3) Freundlich and Langmuir adsorption isotherms apply for different impurities. The theoretical expressions are then used to critically analyse the experimental data on supersaturation barriers observed during the growth of ammonium oxalate monohydrate and potassium dihydrogen phosphate single crystals from aqueous solutions containing different impurities. It was found that: (1) Langmuir adsorption isotherm is more practical for the analysis of the experimental data of the dependence of supersaturation barriers σ_d, σ* and σ** on the concentration c_i of an impurity, and (2) the ratios σ_d/σ* and σ*/σ** of successive supersaturation barriers for an impurity either increases or remains constant with an increase in impurity concentration c_i, and may be explained in terms of the mechanism of adsorption of impurity particles. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Atomic force microscopy studies on surface morphologies of CdHg(SCN)4 crystals grown in solutions containing excessive amount of Cd(II) cations

Surface morphologies of CdHg(SCN)₄ (CMTC) crystals grown from solutions with excessive amount of Cd(II) cations (5%, 20% and 50% in molar ratio) have been investigated by atomic force microscopy (AFM). [Cd(SCN)_n]^2‐n (n ≤ 4) complex anions formed by addition of excessive Cd(II) cations in the solutions have been found to act either as growth units or impurities during CMTC crystal growth. On the prismatic faces, incorporation of [Cd(SCN)_n]^2‐n (n ≤ 4) complex anions as growth units leads to the formation of well‐oriented protuberance trains at the step fronts, named as “locally anisotropic crystal growth”. These protuberances become fewer, less distinct and nearly disappeared with the increase of excessive Cd(II) cations in the solutions. The pyramidal face, however, varies from regular 2D nucleation growth at a low concentration of Cd(II) to much rougher growth surfaces at high concentrations, exhibiting typical surface morphologies where crystal growth is completely inhibited by impurities. Observations in this experiment provide a new picture of crystal growth.     

Effect of different solvents on the habit of meta‐nitroaniline single crystals

The habit of the organic non‐linear optical material meta‐nitroaniline (mNA) crystallized from different organic solvents such as acetone, benzene, ethyl acetate, n‐hexane, methanol and toluene were studied. Solubility of mNA in these solvents at various temperatures in the range between 288 and 323 K was determined by gravimetric method. Crystals were grown by restricted evaporation of solvents method. Solutions with different solvents having different chemical nature and polarity yielded crystals with different habits: one‐dimensional needles, two‐dimensional rhombic platelets and three‐dimensional octahedral. In addition, the mNA crystals show unidirectional growth behaviour along its polar [001] direction irrespective of the solvents used. All the grown crystals were found to be orthorhombic system with point group mm2 and space group Pbc2₁ which was confirmed by powder X‐ray diffraction study. Optical transmittance study showed that the grown mNA single crystals have optical transparency in the wavelength range between 430 and 1550 nm. SHG efficiency of the grown mNA crystal was 3 times grater than KDP. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal growth,morphology, spectrographic characterization and thermal properties of 4,5‐bis(benzoylthio)‐1,3‐dithiole‐2‐thione

Single crystals of 4,5‐bis(benzoylthio)‐1,3‐dithiole‐2‐thione (BBDT), were grown from methylene chloride and the growth morphology was deduced by the Bravais–Friedel Donnay–Harker (BFDH) model. The grown crystals were characterized by optical absorption, infrared, Raman and X‐ray powder diffraction spectroscopy. The thermal behavior of BBDT has been investigated by means of thermogravimetric analysis and differential thermal analysis measurements in air. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical imaging of the growth kinetics and polar morphology of zinc tris(thiourea) sulphate single crystals

Growth kinetics of zinc tris(thiourea) sulphate (ZTS) single crystals was imaged in two different growth geometries using laser shadowgraphy technique. Growth rates of the {010} and {001} faces were computed as a function of supersaturation. The time evolution of polar morphology of ZTS crystal based on the growth rates is presented. Except (00 ) face, all the other three faces are found to have a dead zone resulting in large induction period of growth. The anisotropy in the growth rates of the (001) and (00 ) faces was very high, resulting in polar morphology. Different chemical environments on two sides of the (001) slice are suggested as the possible cause for the polar morphology of the crystals. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of organic impurities on the surface morphology and growth mechanism of KBP crystals (C8H5O4K)

The surface morphology of the (010) face of potassium biphthalate (KBP) crystals grown from aqueous solutions under the supersaturation ranging within 0.029–0.04 has been studied by the methods of optical and electron microscopies. It was revealed that the (010) surface has polygonal growth macrohills of the dislocation nature, small hillocks developing by the mechanism of successive two-dimensional nucleation, and numerous two-dimensional nuclei. The density of small hillocks (10⁴–10⁵ cm^?2) exceeds the dislocation density in KBP crystals by one to two orders of magnitude. It is shown that at low supersaturations, the (010) face grows simultaneously by the dislocation mechanism and the mechanism of successive two-dimensional nucleation. It is also established that the tangential velocity of growth-step motion on the (010) face increases in the presence of organic impurities. This effect can be used as one of the factors increasing the growth rates of crystal faces at low impurity concentrations (the so-called catalytic effect of impurities).     

Solubility,inhibition of crystallization and microscopic analysis of calcium oxalate crystals in the presence of fractions from Humulus lupulus L.

Procedures for obtaining noncytotoxic and nonmutagenic extracts from Humulus lupulus L. of high potency for inhibition and dissolving of model (calcium oxalate crystals) and real kidney stones, obtained from patients after surgery, are presented. Multistep extraction procedures were performed in order to obtain the preparations with the highest calcium complexing properties. The composition of obtained active fractions was analyzed by GC/MS and NMR methods. The influence of preparations on inhibition of formation and dissolution of model and real kidney stones were evaluated based on conductrometric titration, flame photometry and microscopic analysis.