Effect of Cocatalysts on the Catalytic Activities of Tantalum‐ and Niobium‐Based Catalysts for Ring‐Opening Metathesis Polymerization of Norbornene

A series of pentavalent tantalum and niobium complexes with aryloxy ligands was prepared, and their catalytic behavior for the ROMP of norbornene was studied in the presence of an alkylaluminum cocatalyst. Tantalum complexes 1 – 4 showed very high activity for the ROMP of NBE in combination with ⁱBu₃Al to give high‐molecular‐weight polymers. In contrast, the niobium complexes 5 and 6 , as well as NbCl₅, exhibited very high activity upon activation with Me₃Al to give high‐molecular‐weight polymers.

     

η3‐Benzyl‐Nickel‐Diimine Complex: Synthesis and Catalytic Properties in Ethylene Polymerization

The oxidative addition of benzyl chloride to Ni(cod)₂ in the presence of 1,4‐bis(2,6‐diisopropylphenyl)acenaphthenediimine followed by chloride abstraction affords [(η³‐CH₂C₆H₅)Ni(α‐diimine)][PF₆] (α‐diimine = 1,4‐bis(2,6‐diisopropylphenyl)acenaphthenediimine) in 70% yield. The complex is active in ethylene polymerization in the presence of methylaluminoxane and under mild reaction conditions. The polyethylenes obtained are highly branched, have very low densities, do not show T_m or measurable crystallinity and have molecular weights ranging from 80 × 10³ to 290 × 10³ g · mol⁻¹.

     

Precision Synthesis of Poly(3‐hexylthiophene) from Catalyst‐Transfer Suzuki−Miyaura Coupling Polymerization

^tBu₃ PPd(Ph)Br ( 1 )‐catalyzed Suzuki‐Miyaura coupling polymerization of 2‐(4‐hexyl‐5‐iodo‐2‐thienyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane ( 2 ) was investigated. Monomer 2 was polymerized with 1 at 0 °C in the presence of CsF and 18‐crown‐6 in THF containing a small amount of water to yield P3HT with a narrow molecular weight distribution and almost perfect head‐to‐tail regioregularity. The values increased up to 11 400 g · mol⁻¹ in proportion to the feed ratio of 2 to 1 . The MALDI‐TOF mass spectra showed that P3HT with moderate molecular weight uniformly had a phenyl group at one end and a hydrogen atom at the other, indicating involvement of a catalyst‐transfer mechanism. Successive 1 ‐catalyzed polymerization of fluorene monomer 3 and then 2 yielded a well‐defined block copolymer of polyfluorene and P3HT.

     

Highly Active Syndiospecific Living Polymerization of Higher 1‐Alkene with ansa‐Fluorenylamidodimethyltitanium Complex

1‐Hexene polymerization was conducted by [t‐BuNSiMe₂(3,6‐t‐Bu₂Flu)]TiMe₂ ( 1 ) using trialkylaluminum‐free modified methylaluminoxane (dMMAO) as a cocatalyst in toluene. The system produced living syndiotactic poly(1‐hexene) with high turnover frequency of propagation (TOF, 98 s⁻¹) at 0 °C. The propagation rate was increased linearly against the 1‐hexene concentration, which indicates that the first‐order dependence of the propagation rate on monomer concentration. Polymerizations of 1‐octene, 1‐decene and 1‐dodecene were also conducted for investigating the effect of chain length of 1‐alkene on propagation rate by means of the livingness of this system. The propagation rate decreased according to the chain length until 1‐decene but almost unchanged in longer 1‐alkene: TOF, 1‐octene (62 s⁻¹)>1‐decene (32 s⁻¹) ≈ 1‐dodecene (31 s⁻¹).

     

Mixed Aluminum‐Magnesium‐Rare Earth Allyl Catalysts for Controlled Isoprene Polymerization: Modulation of Stereocontrol

Summary: The performances of readily available Ln(allyl)₂Cl(MgCl₂)₂ · (THF)₄ precursors (Ln = Nd, 1 ; Y, 2 ; La, 3 ), in combination with alkyl aluminum activators [MAO, AlMe₃, AlEt₃, Al(iBu)₃], have been studied in isoprene polymerization. The catalyst combination 1 /MAO (1:30) shows a high activity (average TOFs up to ca. 5 × 10⁴ mol (Ip) · mol (Nd)⁻¹ · h⁻¹ at 20 °C) and produces polyisoprene in a controlled fashion with up to 98.5% cis content, number‐average molecular weights in reasonable agreement with calculated values, and relatively narrow polydispersities index ( = 1.20–1.70). The yttrium precursor 2 affords systems with much lower activity and degree of control, but enables the formation of either 1,4‐cis‐enriched (75%) or 1,4‐trans‐enriched (91%) polyisoprenes, simply replacing the MAO activator by AlEt₃ or Al(iBu)₃, respectively.

Formation of 1,4‐cis‐ or 1,4‐trans‐enriched polyisoprenes upon activation with MAO.     

Supramolecular Assembly of Gold Nanoparticles Mediated by Polypseudorotaxane with Thiolated β‐Cyclodextrin

Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.

A typical TEM image of gold nanoparticle aggregate 2 .     

Green Polymer Chemistry: II. Enzymatic Synthesis of Methacrylate‐Terminated Polyisobutylenes

Methacrylate‐terminated polyisobutylenes (PIB‐MAs) were synthesized by transesterification of vinyl methacrylate by hydroxyl‐terminated polyisobutylenes (PIB‐OH) using Candida antarctica lipase B (Novozyme 435) catalyst in hexane at 50 °C. PIB CH₂ CH₂ CH₂ OH and Glissopal OH, synthesized by anti‐Markovnikov hydrobromination of allyl‐terminated PIB and Glissopal®2300 followed by hydrolysis, were quantitatively converted into the corresponding PIB‐MAs. ¹H and ¹³C NMR spectroscopy verified the formation of the expected structures. This “green” chemistry is a very promising methodology for polymer functionalization in general, and biomaterial synthesis in particular.

     

Silyl‐Terminated Ethylene‐co‐Norbornene Copolymers by Organotitanium‐Based Catalysts

Ethylene (E) and norbornene (N) were copolymerized in the presence of PhSiH₃ as chain‐transfer agent with [Ti(η⁵:η¹‐C₅Me₄SiMe₂NBu^t)(η¹‐Me)₂] precatalyst combined with [Ph₃C][B(C₆F₅)₄]. The silane was introduced at chain‐ends of E‐co‐N copolymers with concomitant reinitiation of the growing polymer chain. The concentrations of the silane and polymer molecular weight are inversely correlated. The characteristic signals of  SiH₂Ph chain‐ends were observed by ¹H NMR. The Si heteroatom is predominantly adjacent to ethylene units in E‐co‐N copolymers with high N content.

     

Thienopyrazine‐Based Low‐Bandgap Poly(heteroaryleneethynylene)s for Photovoltaic Devices

Summary: Low‐bandgap π‐conjugated polymers that consist of alkyl thiophene/alkoxy phenylene and 2,3‐diphenylthieno[3,4‐b]pyrazine units have been prepared in high yields by a Sonogashira polycondensation. The copolymers are characterized by NMR, IR, UV, GPC, and elemental analysis. Thin films of the polymers P1 , P2 , and P3 exhibit an optical bandgap of ≈1.57–1.60 eV. Under simulated AM 1.5 conditions P2/PCBM devices on polyester foil provide a short circuit current of I_SC = 10.72 mA · cm⁻², an open circuit voltage of V_oc = 0.67 V, and a power conversion efficiency of 2.37%.

Schematic of the photovoltaic device made from the polymers synthesized here.     

Copolymerization of Propene and 5‐Vinyl‐2‐Norbornene: A Simple Route to Polar Poly(propylene)s

Summary: The metallocenes rac‐C₂H₄(Ind)₂ZrCl₂ ( 1 ), rac‐Me₂Si(Ind)₂ZrCl₂ ( 2 ), and rac‐Me₂Si(2‐Me‐benz[e]Ind)₂ZrCl₂ ( 3 ) efficiently copolymerize propene and 5‐vinyl‐2‐norbornene (VNB). 1 and 2 give a high VNB content and high productivities, whereas 3 gives moderate incorporation. Surprisingly, precatalysts 1 and 2 , which have very closely related structures, showed very different reactivities toward VNB, with 1 having a greater affinity for VNB than for propene. The copolymers are quantitatively converted into polyolefins with polar functionalities.

     

Poly(ferrocenylsilane)‐block‐Polylactide Block Copolymers

A PFS/PLA block copolymer was studied to probe the effect of strong surface interactions on pattern formation in PFS block copolymer thin films. Successful synthesis of PFS‐b‐PLA was demonstrated. Thin films of these polymers show phase separation to form PFS microdomains in a PLA matrix, and ultrathin films (<5 nm) formed SINPATs on silicon and mica. The SINPATs consisted of strongly surface‐adsorbed PLA blocks on top of which the PFS blocks dewetted into sphere‐like features. The lateral spacing between these features was regular, and was typically much larger than the length scale associated with regular block copolymer phase separation.

     

Synthesis and Electrooptic Properties of Poly(2,6‐anthracenevinylene)s

High molecular weight poly(9,10‐bis(p‐(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene) (2,6‐PAV) was synthesized with 2,6‐dimethylanthraquinone as a key intermediate. The as‐synthesized polymer is readily soluble in common organic solvents and can be used for spin‐coating. The as‐synthesized polymer exhibits a broad absorption band ranging from 280 to 520 nm and a bluish green emission band with a peak at 500 nm. The polymer shows good thermal stability, and no distinct glass transition is observed. A simple device with the configuration ITO/PEDOT:PSS/2,6‐PAV/Ba/Al showed a turn‐on voltage of 4.8 V and a maximal brightness of 340 cd · m⁻².

     

Surface‐Functionalized,Ring‐Opening Metathesis Polymerization‐Derived Monoliths for Anion‐Exchange Chromatography

Ring‐opening metathesis polymerization (ROMP) was used for the synthesis of monolithic capillary columns with inner diameters of 200 µm. The resulting polymeric monoliths were characterized by inverse size‐exclusion chromatography (ISEC). Surface functionalization was carried out in situ using 2‐(N,N‐dimethylaminoethyl)norborn‐5‐ene‐2‐ylcarboxylic amide ( 1 ). The resulting functionalized monoliths were successfully used in anion‐exchange chromatography of oligodeoxynucleotides.

     

Metal‐Free Activation in the Anionic Ring‐Opening Polymerization of Cyclopropane Derivatives

The successful activation observed when using Bu^tP₄ phosphazene base and thiophenol or bisthiols for the anionic ring opening polymerization (ROP) of di‐n‐propyl cyclopropane‐1,1‐dicarboxylate is described. Well‐defined monofunctional or difunctional polymers with a very narrow molecular weight distribution were obtained through a living process. Quantitative end‐capping of the propagating malonate carbanion was accessible by using either an electrophilic reagent such as allyl bromide or a strong acid such as HCl. Kinetics studies demonstrated a much higher reactivity compared to the conventional route using alkali metal thiophenolates.

     

Titanium‐Catalyzed Norbornene Oligomerization. Isolation of a Crystalline Heptamer with a 2,3‐exo‐Disyndiotactic Structure

Summary: Norbornene (NB) was oligomerized at 0 °C using AlEt₂Cl‐TiCl₄ at a monomer/titanium molar ratio of about 11. The oligomerization product consists of a fraction soluble in diethyl ether, amorphous by X‐ray examination, and of a crystalline fraction, insoluble in diethyl ether. The crystalline fraction was shown by powder X‐ray diffraction to consist of a NB heptamer. Single‐crystal X‐ray analysis indicated that the heptamer had a stereoregular 2,3‐exo‐disyndiotactic structure. The heptamer adopts a strained, highly irregular, folded conformation in the crystalline state. Structural differences with respect to NB oligomers obtained with zirconocene catalysts are discussed.

A view of the molecular structure of the crystalline NB heptamer.     

Phenoxy–Ether Ligated Ti Complexes for the Polymerization of Ethylene

Summary: Bis(phenoxy–ether) Ti complexes were investigated as ethylene polymerization catalysts. The complexes, combined with iBu₃Al/Ph₃CB(C₆F₅)₄ or methylaluminoxane (MAO) cocatalysts, can be highly active single‐site catalysts, which display activities ( turnover frequency, max. 2 065 min⁻¹) comparable with that of a highly active bis(phenoxy–imine) Ti complex/MAO system, and provide very high molecular weight polyethylenes ( 2 040 000–5 420 000) at 25 °C under atmospheric pressure.

Synthesis of polyethylene using bis(phenoxy–ether) Ti complexes, an example of which is shown.     

Synthesis of Oligosaccharide‐Branched Ribofuranan by Ring‐Opening Polymerization of a New Anhydroribo Trisaccharide Monomer

A new anhydroribotrisaccharide monomer, A2B3LR ( 1 ), was synthesized and ROP was carried out to elucidate the polymerizability and to obtain oligosaccharide‐branched polysaccharides with defined structures. The new trisaccharide monomer was found to be polymerized readily with BF₃ · OEt₂ as a catalyst at ?40 °C to give a lactose‐branched polymer. Copolymerization with ADBR gave the corresponding copolymers in good yields. After removal of protective benzyl groups, D ‐lactose‐branched ribofuranans with free hydroxyl groups were obtained in good yields. The structure of polymers was analyzed by ¹H, ¹³C, and two‐dimensional NMR measurements, suggesting that D ‐lactose‐branched ribofuranans had (1 → 5)‐α stereoregularity.

     

Catalytic Polymerizations of Hydrophobic,Substituted, Acetylene Monomers in an Aqueous Medium by Using a Monomer/Hydroxypropyl‐β‐cyclodextrin Inclusion Complex

Ten hydrophobic, substituted, acetylene monomers were examined as to their abilities to form an inclusion complex with hydroxypropyl‐β‐cyclodextrin (HPCD). Only the monomers with suitable substitutents were found to form the monomer/HPCD complex, which was identified by NMR, FTIR, and UV‐vis spectroscopy. Polymerizations of the monomers were successfully carried out in aqueous solution by using the prepared monomer/HPCD inclusion complex and by using a water‐soluble Rh‐based catalyst, [Rh(cod)₂BF₄] or [Rh(nbd)(H₂O)OTs]. Such polymerizations provided high‐yield (>90%) polymers with a cis content of approximately 100%. The as‐prepared polymers could take an ordered helical conformation, just like their counterparts obtained in organic solvents.

     

Optical Non‐Linearity from Montmorillonite Intercalated with a Chromophore‐Containing Dendritic Structure: A Self‐Assembly Approach

Chromophore‐containing dendritic structures (G1, G2) are utilized to intercalate layered silicates, which results in a large d‐spacing up to 126 Å. An exfoliated morphology is obtained by mixing the dendritic structure intercalated layered silicates with polyimide in N,N‐dimethylacetamide solution. The dendritic structures attached on the clay template would arrange in a non‐centrosymmetric manner. This self‐assembled arrangement brought about the electro‐optical coefficients of 5–6 pm · V⁻¹ for these relatively low chromophore‐containing organic/inorganic nanocomposites without resorting to poling. Excellent temporal stability (100 °C) is also achieved.