The Advantages of In Situ Surfactant Generation for Miniemulsions

The stabilisation of miniemulsions using an in situ generated surfactant is presented. This surfactant, prepared from of a water‐soluble base and an oil‐soluble long chain acid was successfully used to create stable miniemulsions with up to 60 vol.‐% organic phase. It is shown that the creation of a surface active species at the oil–water interface allowed stable miniemulsions to be generated more rapidly than when using conventional surfactant. In addition, polymerised miniemulsions exhibited less secondary nucleation when in situ surfactants were used.

     

Microstructure,Kinetics, and Transport in Oil‐in‐Water Microemulsion Polymerizations

The kinetics of microemulsion polymerization depend on the structure of the initial microemulsion and the transport of species between the aqueous domain, the micelles, and the polymer particles. The water solubility of the monomer and the proximity of the initial microemulsion composition to a phase boundary are key considerations for studying microemulsion polymerization kinetics and producing the desired products. Complications frequently arise in the synthesis of copolymers or the incorporation of controlled polymerization mechanisms because of the compartmentalized nature of microemulsion polymerizations.

     

Low‐Density Polyethylene (LDPE) Surface With a Wettability Gradient by Tuning its Microstructures

Summary: We describe an interesting approach to the fabrication of wettability gradients from hydrophobicity to superhydrophobicity in low‐density polyethylene (LDPE) films by first forming high porosity surfaces and placing the specimens onto linear temperature gradients. While the polymer chosen for the study is non‐polar, its microporous layer provides sufficient superhydrophobicity. Lateral gradient heating of the layer results in partial melting of the polymer and correspondingly decreases porosity thus decreasing hydrophobicity.

     

Synthesis of Poly(ethylene oxide)s Bearing Functional Groups along the Chain

Well‐defined poly(ethylene oxide)s (PEOs) bearing reactive sites regularly distributed along the chain have been synthesized by the polycondensation of PEO containing a central tertiary amino group with dichloromethane, followed by quaternization with suitable reagents to obtain polyzwitterionic or cationic PEOs with alkyl, allyl, or fluorocarbon pendant groups. The pendant allyl groups have been converted into primary amino groups by reaction with 2‐aminoethanethiol hydrochloride to obtain polyamino‐functionalized PEO.

Polyfunctional PEOs bearing different pendant groups.     

Synthesis of Nanosized (<20 nm) Polymer Particles by Radical Polymerization in Miniemulsion Employing in situ Surfactant Formation

A novel method for synthesis of ultrafine polymeric nanoparticles of diameters less than 20 nm has been developed. The method is based on miniemulsion polymerization exploiting combination of the in situ surfactant generation approach (whereby the surfactant is formed at the oil–water interface by reaction between an organic acid and a base) and ultrasonication. Conventional radical polymerization and nitroxide‐mediated radical polymerization of styrene have been conducted in miniemulsion using oleic acid/potassium hydroxide, demonstrating that particles with diameters less than 20 nm can be obtained by this approach at surfactant contents much lower than traditionally required in microemulsion polymerizations.

     

Magnetic Molecularly Imprinted Polymer Particles Synthesized by Suspension Polymerization in Silicone Oil

Summary: Magnetic nanoparticles have been prepared by a co‐precipitation method and modified with methacryloxypropyltrimethoxysilane. Magnetic molecularly imprinted polymer particles have been prepared by suspension polymerization in silicone oil. The particles possess a high affinity to the template molecules and are rapidly separated under a magnetic field.

SEM photograph of magnetic MIP particles.     

Hairy PEO‐Silica Nanoparticles through Surface‐Initiated Polymerization of Ethylene Oxide

Summary: The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles was performed in situ by the ring‐opening polymerization of the oxirane monomer initiated from the mineral surface using aluminium isopropoxide as an initiator/heterogeneous catalyst. Alcohol groups were first introduced onto silica by reacting the surfacic silanols with prehydrolyzed 3‐glycidoxypropyl trimethoxysilane. The alcohol‐grafted silica played the role of a coinitiator/chain‐transfer agent in the polymerization reaction and enabled the formation of irreversibly bonded polymer chains. Silica nanoparticles containing up to 40 wt.‐% of a hairy layer of grafted PEO chains were successfully produced by this technique.

The grafting of poly(ethylene oxide) (PEO) onto silica nanoparticles by in‐situ ring‐opening polymerization of the oxirane monomer.     

RIS Model of the Helix‐Kink Conformation of Erythro Diisotactic Polynobornene

Computer simulations reveal the unique conformation of or erythro diisotactic polynorbornene, a polymer with numerous important applications in microelectronics. While previous simulations suggested that this polymer adopts a helix‐kink morphology, the results presented herein indicate that the reversal of the helix symmetry is the origin of such kinks which cause a transition from a rigid‐rod conformation to a random coil with increasing molecular weight. An RIS model was developed that accurately predicts the unique conformation of this polymer. This model predicts a rigid‐rod helical conformation that eventually transitions to a random coil at a degree of polymerization of approximately 500.

     

Novel Top‐Surface Imaging Process by Selective Chemisorption of Poly(dimethyl siloxane) on Diazoketo‐Functionalized Single Component Photoresist

A novel top‐surface imaging process was successfully established using selective chemisorption of amine‐functionalized poly(dimethyl siloxane) onto the carboxylic groups formed on the surface of diazoketo‐functionalized polymer film by UV light irradiation. The chemisorbed poly(dimethyl siloxane) worked as an efficient etch mask for the subsequent oxygen plasma etching process for pattern generation. High‐resolution patterns were resolved with the new imaging process.

     

Investigation into Molecular Diffusion in Hydrogels Using the Refractive Index Method

An in‐situ refractive index method is applied to study the diffusion process of sucrose in hydrogels. Diffusion was monitored by recording the refraction of a laser beam when passing through a triangular hydrogel cell. The distribution of refractive index changes was obtained from the deviated distance of the linear beam and converted to the distribution of concentration. By employing Fick's second law, the diffusion behavior was investigated and the diffusion coefficient was obtained.

Schematic picture of the refractive index equipment to study the diffusion process.     

Assembly of Polyaniline Nanostructures

Polyaniline nanostructures (nanosheets, nanofibers, and nanoparticles) can be assembled at the organic/aqueous interface or in solution by controlling the diffusion rate and the polymerization induction time of aniline. The quality of polyaniline nanostructures is determined by the polymerization solution conditions. Polyaniline nanosheets formation mechanism was proposed. Under certain polymerization conditions, polyaniline nanofibers or/and nanoparticles were obtained.

     

A Novel Class of Betaine‐Type Polyampholytes with Stimuli‐Responsive and Complexing Properties

Linear and crosslinked betaine‐type polyampholytes based on ethyl 3‐aminocrotonate and unsaturated carboxylic acids have been synthesized by very fast polymerization in bulk and solution. Bulk polymerization occurred exothermically even at room temperature and without adding an initiator. The polyampholytes showed stimuli‐responsive properties with respect to pH, ionic strength, water/organic solvent mixtures, and metal ion complexation.

Temperature profile of the polymerization reaction for an equimolar mixture of CRO and AA with time in the absence of initiator.     

New Azo Chromophore‐Containing Conjugated Polymers: Facile Synthesis by Using “Click” Chemistry and Enhanced Nonlinear Optical Properties Through the Introduction of Suitable Isolation Groups

A new series of azobenzene‐containing polyfluorenes have been successfully prepared through polymer reactions by the utilization of “click” chemistry. All the polymers were well characterized and soluble in common solvents. By the application of the concept of “suitable isolation group”, the macroscopic nonlinear optical (NLO) properties of the polymers could be boosted to as large as three times that of the polymer without isolation moieties. Also, all the polymers were thermally stable, and demonstrated good procesability, coupled with improved optical transparency. Thus, they are good candidates for the practical applications as new photonic materials.

     

Acyclic Triene Metathesis Polymerization with Chain‐Stoppers: Molecular Weight Control in the Synthesis of Branched Polymers

The synthesis of branched macromolecules from renewable resources via olefin metathesis is described. We observed that it is possible to control the molecular weight during the acyclic triene metathesis (ATMET) of a triglyceride by the application of methyl acrylate as a chain stopper for this straightforward one step one pot polymerization. The resulting branched materials were characterized by GPC, NMR as well as ESI‐MS and the combination of these techniques provided valuable insights into the polymer structure as well as occurring side reactions during this olefin metathesis polymerization reaction.