Thermoswitchable Electronic Properties of a Gold Nanoparticle/Hydrogel Composite

Summary: A well‐dispersed gold nanoparticle/poly(N‐isopropylacrylamide) (PNIPAm) hydrogel nanocomposite with thermoswitchable electrical properties is prepared by the copolymerization of functional Au nanoparticles with N‐isopropylacrylamide. It is found that the electrical conductivity of the nanocomposite changes by two orders of magnitude at moderate temperature (T_tran) upon temperature stimuli. The change of electrical properties is reversible during a heating and cooling cycle.

Schematic illustration of the mechanism of the thermo‐switchable electronic properties of the Au nanoparticle/PNIPAm composite.     

Combining RAFT Radical Polymerization and Click/Highly Efficient Coupling Chemistries: A Powerful Strategy for the Preparation of Novel Materials

This paper highlights the powerful combination of reversible addition–fragmentation chain transfer (RAFT) radical polymerization and various click/coupling chemistries. This is not an exhaustive review but rather an overview demonstrating the impressive possibilities that the “marriage” of these two synthetic approaches offers in modern macromolecular design and synthesis.

     

Penultimate Propagation Kinetics of Butyl Methacrylate,Butyl Acrylate,and Styrene Terpolymerization

The pulsed‐laser polymerization technique is used to determine the composition‐averaged free‐radical propagation rate coefficient (k_p,ter) for terpolymerization of butyl methacrylate, butyl acrylate, and styrene between 60 and 120 °C. A significant deviation from terminal model predictions is observed for the ternary system, indicating that penultimate kinetics are important at these industrially relevant temperatures. The implicit penultimate propagation model, with all the coefficients taken from previous studies of the binary systems, provides a good prediction of the experimental k_p,ter results.

     

Tailoring of Three‐Phase Crystalline Systems in Isotactic Poly(propylene)

Summary: A novel method for the tailoring of unique three‐phase crystalline systems in isotactic poly(propylene) has been proven. It is based on a synergistic application of a specific β‐nucleating agent and high pressure during crystallization. The formation of a γ phase was supported by elevated pressure and high temperature during crystallization; under these conditions the growth of both β and α phases was significantly suppressed. Nevertheless, during the course of crystallization at lower pressure and/or lower temperatures, strong β‐nucleation efficiency favored the formation of a β phase.

     

A Closed‐Loop Phase Diagram in a Weakly Interacting Polyolefin Copolymer Binary Blend System

Summary: The phase behavior of poly(ethylene‐co‐styrene) (PES) and poly(ethylene‐co‐butene) (PEB) blends has been studied. A closed‐loop phase diagram was clearly observed in this weakly interacting system as the styrene content in the PES decreased to about 1 mol‐%. At higher styrene contents, the phase loop starts to interplay with the crystallization transformation at lower temperatures.

Phase diagram of PEB/PES blends. Phase boundary line is only for easy demonstration.     

Direct Synthesis of Biodegradable Polysaccharide Derivative Hydrogels Through Aqueous Diels‐Alder Chemistry

A robust synthetic strategy where polysaccharide derivative precursors react through aqueous Diels–Alder chemistry without the involvement of catalysts and coupling reagents, allowing for the direct encapsulation of positive and negative proteins within biodegradable hydrogels. The results demonstrated that the aqueous Diels–Alder chemistry provides an extremely selective reaction and proceeds with high efficiency for polysaccharide bioconjugation. This synthetic approach uniquely allows for the direct fabrication of biologically functionalized gels with ideal structures, which provides a competitive alternative to conventional conjugation techniques such as click chemistry.

     

Controlled Alternating Copolymerization of (Meth)acrylates and Vinyl Ethers by Using Organoheteroatom‐Mediated Living Radical Polymerization

Alternating copolymers comprised of (meth)acrylates and vinyl ethers with controlled molecular weights and polydispersities were synthesized for the first time by living radical polymerization using organotellurium, stibine, and bismuthine chain transfer agents. Combining living alternating copolymerization and living radical or living cationic polymerization afforded hitherto unavailable block copolymers with controlled macromolecular structures.

     

Poly(4‐vinylpyridine) Nanocrosslinked by Polyhedral Oligomeric Silsesquioxane

Summary: Octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) was used as the crosslinking agent to prepare the nanocrosslinked poly(4‐vinylpyridine) (P4VP) with POSS content up to 55.2 wt.‐%. The formation of the crosslinked structure is ascribed to the macromolecular reaction between pyridine rings of P4VP and epoxide groups of OpePOSS. The POSS‐crosslinked P4VP displayed enhanced glass transition temperatures (T_gs) and an improved thermal stability in terms of the results of thermal analysis.

Crosslinking of poly(4‐vinylpyridine) with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane.     

Polyelectrolyte Complexes Consisting of Macromolecules With Varied Stiffness: Computer Simulation

Monte Carlo simulations are employed in order to analyze the structure of polyelectrolyte complexes consisting of two identical but oppositely charged macroions with varying chain stiffness. It is shown that two complex structures can arise depending on the stiffness of the constituent chains. Stiff chains are organized into a “ladder” structure in which chains are located parallel to each other and monomeric units are arranged into ionic pairs according to their position in the chain. Flexible chains form a globular “scrambled‐egg” structure with a disordered position of monomer units. The conformational transition between the two structures proceeds as a phase transition.

     

Advances in the Elegance of Chemistry in Designing Dendrimers

Highly functional and monodisperse macromolecules with tailored architecture constitute the key to designing efficient and smart nanomaterials. Dendrimers offer real potential to achieve this goal, and one of the earlier challenges faced by this novel class of polymers has been addressed by the evolution of synthetic methodologies. This review provides an evaluation of the role played by chemistry in taking these macromolecules of academic relevance to practical industrial and biological applications, in a relatively short period. One can now construct dendrimers in a ‘made‐to‐order’ fashion, for numerous applications in a variety of disciplines.

     

Polymerization of Aniline by Auric Acid: Formation of Gold Decorated Polyaniline Nanoballs

Summary: We report a new method for the preparation of polyaniline nanoballs by using HAuCl₄ as an oxidizing agent. During the reaction, aniline is oxidized and forms polyaniline whilst the hydrogen tetrachloroaurate is reduced and forms gold nanoparticles. These gold nanoparticles are found to decorate the nanoballs.

The resultant precipitate and corresponding TEM image of the gold‐nanoparticle covered polyaniline nanoball.     

Square Lamellar Structure Having Phase‐Separated Microdomain in H‐Shaped Block Copolymer Thin Film

The morphology of a H‐shaped block copolymer (poly(ethylene glycol) backbone and polystyrene branches (PS)₂PEG(PS)₂) in a thin film has been investigated. A peculiar square lamella that has a phase‐separated microdomain at its surface is obtained after spin coating. The experimental temperature plays a critical role in the lamellar formation. The copolymer first self‐assembles into square lamellar micelles with an incomplete crystalline core due to the crystallizability of PEG. In the subsequent process of solvent evaporation, phase separation between PS and non‐crystalline PEG attached at the chain‐folded PEG surface takes place, which results in phase‐separated microdomains being formed at the lamellar surface.

     

Nanofibrilar Polyaniline: Direct Route to Carbon Nanotube Water Dispersions of High Concentration

Water dispersible nanofibrilar polyaniline (NF‐PANI) provides a novel and direct route towards carbon nanotube water dispersions of high concentration. Carrying out the chemical synthesis of NF‐PANI in the presence of carbon nanotubes (CNTs) results in an entirely nanostructured nanofibrilar polyaniline/carbon nanotube (NF‐PANI/CNT) composite material that contains well segregated CNTs partially coated by NF‐PANI. This new approach is simple, fast, and inexpensive, and enables the direct preparation of stable and homogeneous dispersions of the composites in water at concentrations up to 10 mg · mL⁻¹, even for the highest CNT loadings of 50 wt.‐% without the participation of surfactants or stabilizers.

     

Solvent Resistant Honeycomb Films from Photo‐Crosslinkable Polycinnamate

Microporous films consisting of two‐dimensionally ordered void structures ‐ so‐called honeycomb films ‐ were produced by evaporation of polymer solutions under high humidity. Two types of poly(vinyl cinnamate)s were used: A newly synthesized amphiphilic poly(vinyl cinnamate) and a mixture of a commercial poly(vinyl cinnamate) and an amphiphilic polyion complex. Photo‐crosslinking of the honeycomb structure could be achieved by UV irradiation while completely retaining the film morphology. The crosslinked films showed excellent stability against organic solvents.

     

Poly(amido‐amine)s Carrying Primary Amino Groups as Side Substituents

Poly(amido‐amine)s carrying primary amino groups as side substituents have been obtained by polyaddition of N‐triphenylmethyl‐monosubstituted 1,2‐diaminoethane (TPHMAE) to 2,2‐bisacrylamido acetic acid or 1,4‐bisacryloylpiperazine and subsequent removal of the protecting triphenylmethyl group by treating the resultant polymers with aqueous hydrochloric acid. Soluble polymers can be also obtained directly by the polyaddition of monoprotonated 1,2‐diaminoethane to 2,2‐bisacrylamido acetic acid in the presence of a limited amount of added acetic or hydrochloric acid. The resultant polymers are of a higher molecular weight than the corresponding ones prepared from TPHMAE. By adding a limited amount of N‐triphenylmethyl‐monosubstituted 1,2‐diaminoethane to the monomer mixtures leading to poly(amido‐amine)s with a recognised potential as nonviral vectors, such as ISA 23 and ISA 1, a controlled number of pendant primary amino groups have been introduced. By this procedure, ISA 23 and ISA 1 become suitable as polymer carriers for carboxylated drugs as well as amenable to the labelling techniques by fluorescent probes commonly employed for proteins.

Formation of monoprotected primary diamines.