Photoinitiators with Functional Groups, 8

Summary: Bimolecular type‐II photoinitiators for radical photopolymerization suffer from a diffusion‐controlled limitation of reactivity and from deactivation by back electron transfer. Here, a very efficient concept to increase the photoinitiator activity by the covalent binding of phenylglycine to benzophenone using a methylene spacer is presented. Photo‐DSC experiments proved that the rate of polymerization can be tripled in comparison to a physical mixture of the components or an industrially applied system with triethanolamine as coinitiator.

Structure of the new photoinitiator synthesized here.     

Decatungstate (W10O)/Silane: A New and Promising Radical Source Under Soft Light Irradiation

The use of decatungstate in combination with silanes to generate silyl radicals under green fluorescence bulb irradiation as well as sunlight exposure is described. The mechanisms are investigated by ESR and laser flash photolysis experiments. The high potential of this reaction is evidenced here when using a decatungstate/silane/diphenyl iodonium salt combination as an initiating system for the ring opening photopolymerization of epoxides.

     

Combining Living Anionic Polymerization with Branching Reactions in an Iterative Fashion to Design Branched Polymers

This paper reviews the precise synthesis of many‐armed and multi‐compositional star‐branched polymers, exact graft (co)polymers, and structurally well‐defined dendrimer‐like star‐branched polymers, which are synthetically difficult, by a commonly‐featured iterative methodology combining living anionic polymerization with branched reactions to design branched polymers. The methodology basically involves only two synthetic steps; (a) preparation of a polymeric building block corresponding to each branched polymer and (b) connection of the resulting building unit to another unit. The synthetic steps were repeated in a stepwise fashion several times to successively synthesize a series of well‐defined target branched polymers.

     

Addition‐Fragmentation Chain Transfer Involving Dimers of α‐Methylvinyl Monomers Studied by ESR Spectroscopy: Competition between Fragmentation and Bimolecular Termination

Detection of the adduct radical by ESR spectroscopy and after‐effect ESR measurements of the adduct radical concentrations in the photosensitized polymerization of styrene (St) in the presence of dimers of α‐methylstyrene (MSD) and methyl methacrylate have revealed that the dominant mechanism of adduct radical loss changes from bimolecular termination to fragmentation as the temperature is increased beyond 90 °C for St/MSD.

     

Diethoxy‐azobis(pyridinium) Salt as Photoinitiator for Cationic Polymerization: Towards Wavelength Tunability by Cis–Trans Isomerization

N,N′‐diethoxy‐4,4′‐azobis(pyridinium) hexafluorophosphate (DEAP) has been synthesized by alkylation of the corresponding N‐oxide and characterized. DEAP exhibits UV induced cis–trans isomerization with absorptions at around λ = 459 and 360 nm, respectively. The ability of the DEAP ion to act as a photoinitiator for the cationic polymerization of cyclohexene oxide and N‐vinylcarbazole is demonstrated. The initiation step involves the decay of the excited state of the trans form of the salt with homolytic bond rupture of the nitrogen–oxygen bond. Its potential use as a photoinitiator for free radical polymerization is also demonstrated using methyl methacrylate monomer as the example.

     

A Novel Route for Fabricating Metal‐Polymer Composite Nanoparticles with Phase‐Separated Structures

Au nanoparticles (NPs) and polymer composite particles with phase‐separation structures were prepared based on phase separation structures. Au NPs were successfully synthesized in amphiphilic block‐copolymer micelles, and then composite particles were formed by a simple solvent evaporation process from Au NPs and polymer solution. The phase separated structures (Janus and Core‐shell) were controlled by changing the combination of polymers having differing hydrophobicity.

     

Automated Parallel Temperature Optimization and Determination of Activation Energy for the Living Cationic Polymerization of 2‐Ethyl‐2‐oxazoline

Sixteen parallel polymerization reactions of 2‐ethyl‐2‐oxazoline have been performed at different temperatures in an automated synthesizer that allowed individual heating of each reactor. During the reactions samples were taken automatically, which were characterized by means of both online GPC and offline GC, in order to optimize the reaction temperature and to determine the activation energy of the polymerization.

     

Chain Transfer and Efficiency of End‐Group Introduction in Free Radical Polymerization of Methyl Methacrylate in the Presence of Poly(methyl methacrylate) Macromonomer

Summary: Experimental and modeling studies of addition–fragmentation chain transfer (AFCT) during radical polymerization of methyl methacrylate in the presence of poly(methyl methacrylate) macromonomer with 2‐carbomethoxy‐2‐propenyl ω‐ends (PMMA‐CO₂Me) at 60 °C are reported. The results revealed that AFCT involving PMMA‐CO₂Me formed in situ during methyl methacrylate polymerization has a negligible effect on the molecular weight distribution.

     

Novel Electrochromic Displays Using Monodisperse Viologen‐Modified Porous Polymeric Microspheres

Summary: In order to achieve a reasonable response time in an electrochromic display, viologen‐modified porous polymeric microspheres of various porosities have been used as substrates. Porous microspheres are prepared using seeded polymerization in the presence of a porogen. Based on ionic conductivity and the chronocoulometry measurements, it is confirmed that the electrolyte content increases, and the resistance of the polymer particles in the device decreases as the specific surface area of the porous particles increases. This results in a rapid response time of 270 ms.

Schematic representation of the viologen‐modified porous polymeric microspheres in the manufactured ECD device (A). Images of the device (B) in the OFF state (left) and in the ON state (right).     

A Multicolor Photoinitiator for Cationic Polymerization and Interpenetrated Polymer Network Synthesis: 2,7‐Di‐tert‐butyldimethyldihydropyrene

For polymer synthesis upon visible light, actual photoinitiator operates in a restricted part of the spectrum. As a consequence, several photoinitiators are necessary to harvest all of the emitted visible photons. Herein, 2,7‐di‐tert‐butyldimethyldihydropyrene is used for the first time as a multicolor photoinitiator for the cationic polymerization of epoxides. Upon addition of diphenyliodonium hexafluorophosphate and optionally N‐vinylcarbazole, the originality of this approach is to allow efficient monomer conversions under various excitation light sources in the 360–650 nm wavelength range: halogen lamps, and light‐emitting and laser diodes. The synthesis of an interpenetrated polymer network from an epoxide/acrylate blend using a red light at 635 nm is also feasible. The formed polymer material exhibits a photochromic character.

     

Fabrication of Nanofillers into a Granular “Nanosupport” for Ziegler‐Natta Catalysts: Towards Scalable in situ Preparation of Polyolefin Nanocomposites

This communication reports a strategy for scale‐up of an in situ polymerization technique for polyolefin‐based nanocomposites preparation, taking layered silicate (clay) and multi‐walled carbon nanotubes (MWCNTs) as examples of nanofillers. The strategy is realized by transforming the nanofillers into granular “nanosupports” for Ziegler‐Natta catalysts. With a catalyst to polymer replication effect on particle morphology, the in situ prepared nanocomposites are of controlled granular particle morphology. With the polymer particle morphology controlled, the in situ polymerization technique becomes suitable for industrial olefin polymerization processes for mass production of polyolefin nanocomposites.

     

Photoinduced Controlled Radical Polymerization

Well‐controlled radical polymerization of methyl methacrylate can be achieved by in situ photochemical generation of copper (I) complex from air‐stable copper (II) species without using any reducing agent at room temperature. The living character of this polymerization was confirmed by both the linear tendency of molecular weight evolution with conversion and a chain extension experiment.

     

Plasma‐Initiated Controlled/Living Radical Polymerization of Methyl Methacrylate in the Presence of 2‐Cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN)

Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.

Dependence of ln([M]₀/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C.     

Enzymatic Polymerization towards Biodegradable Polyester Nanoparticles

The direct enzymatic polymerization of miniemulsions consisting of lactone nanodroplets represents a new and convenient pathway for the synthesis of biodegradable polymer nanoparticles, where the chemical composition and molecular weight can be varied in a certain range. Oligoesters completely end‐capped with an alkene or diene group can also be prepared by this technique. These building blocks extend polyester application as they allow to impart improved biodegradability to both siloxane and resin chemistry.

TEM image of the polyester particles obtained by enzymatic polymerization in miniemulsion.     

Synthesis of Poly(lactide)s with Modified Thermal and Mechanical Properties

The use of poly(lactide)‐based materials is, in part, limited by their physical and mechanical properties. This article reviews the methods that have been employed to enable enhancement of the materials properties through synthetic manipulation of the polymer structure including block copolymer synthesis and modification of the lactide monomer structure, focusing on the application of ring‐opening polymerization. In turn the effect of these structural modifications on the properties of the resultant materials are reported.

     

Synthesis of POSS‐Functionalized Polyisobutylene via Direct Initiation

POSS‐functionalized polyisobutylenes (PIBs) were synthesized by carbocationic polymerization using an epoxy‐POSS/TiCl₄ initiating system in hexane/methyl chloride (60:40 v/v) solvent mixture at −80 °C. ¹H NMR spectroscopy verified the incorporation of one epoxy‐POSS per polymer chain. Light scattering and TEM analysis demonstrated the formation of 50–100 nm sized aggregates and micron‐sized clusters.

     

Synthesis of a Multi Alternating‐Arm‐Containing Dendritic Star Copolymer by RAFT and Cationic Ring‐Opening Polymerization

A new dendritic heteroarm star copolymer that contains multi‐alternating arms of poly(ethylene oxide‐tetrahydrofuran) (P(EO‐THF)) and poly(methyl methacrylate) (PMMA) on a dendritic polyester core has been synthesized by a ‘core‐first’ approach by combination of sequential cationic ring‐opening polymerization (CROP) and reversible addition–fragmentation transfer (RAFT) polymerization initiated by a dendritic macroinitiator ( 3 ) capped with multi‐alternating terminal carboxylic acid groups (used directly to initiate the ROP of THF in the presence of EO as a polymerization promoter to attain P(EO‐THF) arms) and dithiobenzoate groups (used to initiate RAFT polymerization of MMA to attain PMMA arms). The structures of the products were confirmed by NMR spectroscopy, GPC‐MALLS, and DSC measurements.

     

Automated Raman Spectroscopy as a Tool for the High‐Throughput Characterization of Molecular Structure and Mechanical Properties of Polyethylenes

Raman spectroscopy, which does not require a time‐consuming sample preparation, is described as an analytical tool for the high‐throughput characterization of polyethylenes. The content of comonomer and the amount of methyl groups per 1 000 carbon atoms of polyethylenes can be predicted from Raman spectra using multivariate data analysis. In addition, macroscopic properties, such as density and elastic modulus as well as yield stress, can be derived from Raman spectra.

Raman spectra of selected metallocene‐catalyzed polyethylenes of different comonomer content.     

Water‐Soluble Electrostatic Complexes of C60‐Anchored Anionic Polymers and Cationic Porphyrins

The preparation of novel highly water‐soluble electrostatic complexes from C₆₀‐anchored multi‐armed poly(acrylic acid)s and cationic porphyrin derivatives was demonstrated. The UV‐vis absorption and photoluminescence (PL) of these complexes show that the absorption of soret band exhibits a remarkable red shift and the emission of the Q band indicates an apparent quenching effect in comparison with that of the parent cationic porphyrin. These results imply a remarkable ground state and excited state interaction between the porphyrin ring and the C₆₀ moiety.