Simple,Rapid, and Sensitive Determination of Thiols by Liquid Chromatography with Fluorescence Detection

Thiol compounds are important for protecting cells from oxidative stress. One common method of quantifying thiols is liquid chromatographic separation with fluorescence detection of their derivatives. The pH and the concentration of tris (2-carboxyethyl) phosphine hydrochloride in the reaction medium were shown to have significant effects on the fluorescence intensity of five thiol compounds: cysteine, glutathione, and three phytochelatins. The optimal pH range for derivatization, as indicated by the maximum fluorescence intensities, was 7.75–8.0 for all of the evaluated thiols. The thiol derivative fluorescence increased and then decreased with the tris (2-carboxyethyl) phosphine hydrochloride concentration. In particular, the fluorescence intensities of all of the derivatives decreased by 96.5–99.9% when tris (2-carboxyethyl) phosphine hydrochloride levels were increased from 0.1 to 1?mmol L^?1. We attributed these changes to preferential interactions between tris (2-carboxyethyl) phosphine hydrochloride and the thiol-specific fluorophore, monobromobimane. We describe herein a method, based on our optimized solution pH and tris (2-carboxyethyl) phosphine hydrochloride concentration, that is rapid (12?min) and boasts excellent recovery (91.3–102%), sensitivity (limit of detections, 17.8–75.2?pmol L^?1) and precision (relative standard deviation values ≤1.03%) for the quantification of these thiol compounds in microalgal samples.     

A fast, simple, and reliable hydrophilic interaction liquid chromatography method for the determination of ascorbic and isoascorbic acids

A reliable method for the determination of total vitamin C must be able to resolve ascorbic acid (AA) and the epimeric isoascorbic acid (IAA) and determine the sum of AA and its oxidized form dehydroascorbic acid. AA and IAA are polar molecules with a low retention time in conventional reversed phase systems, and hence of difficult resolution. Hydrophilic interaction chromatography using a TSKgel Amide-80 stationary phase with isocratic elution was successful in resolving the two epimers. The column was compatible with injections of high concentrations of metaphosphoric acid, tris(2-carboxyethyl)-phosphine, and EDTA without drift of baseline and retention time. Total AA and IAA were extracted, stabilized, and reduced in one step at 40 °C, using 5% m-phosphoric acid, 2 mM of EDTA, and 2 mM of tris(2-carboxyethyl)-phosphine as reducing agent. This simple, fast, and robust hydrophilic interaction chromatography-DAD method was applied for the analysis of food products namely fruit juices, chestnut, and ham and also in pharmaceutical and multivitamin tablets. Method validation was performed on the food products, including parameters of precision, accuracy, linearity, limit of detection, and quantification (LOQ). The absence of matrix interferences was assessed by the standard addition method and Youden calibration. The method was fast, accurate, and precise with a LOQ_AA of 1.5 mg/L and LOQ_IAA of 3.7 mg/L. The simple experimental procedure, completed in 1 h, the possibility of using IAA as an internal standard, and low probability of artifacts are the major advantages of the proposed method for the routine determination of these compounds in a large number of samples.     

Molecular structure of (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine oxide. Synthesis of (3,5-diallylisocyanuratomethyl)phosphine sulfides

X-Ray study of the (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine oxide showed that the phosphorylmethyl group is bonded to the nitrogen atom of the cycle. Reaction of the tris(chloromethyl)phosphine sulfide with sodium diallylisocyanurate gave (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine sulfide, and treatment of the tris(3,5-diallylisocyanuratomethyl)phosphine oxide with phosphorus pentasulfide gave a tris(3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine sulfide.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1446–1448, August, 1993.     

Atom-Economic Synthesis of Tris[2-(organylthio)ethyl]phosphine Oxides from Phosphine and Vinyl Sulfides

Abstract

Phosphine, generated from elemental phosphorus in the system KOH-toluene-H₂O, reacts with vinyl sulfides under free radical conditions (AIBN, dioxane, 65–70°C, atmospheric pressure) to form regiospecifically tris[2-(organylthio)ethyl]phosphines, which are readily oxidized in air to corresponding tris[2-(organylthio)ethyl]phosphine oxides.     

Hydrogenation of α,β-unsaturated substrates by tris(2-phridyl)amine (tpN) or tris(2-pyridyl)phosphine (tpP)/[Ir(COE)2Cl]2 catalyst systems

This work describes the homogeneous hydrogenation of different α,β-unsaturated substrates by using as catalyst systems the complex [Ir(COE)₂Cl]₂ stabilized by tris(2-pyridyl)amine (tpN) or tris(2-pyridyl)phosphine (tpP) formed in situ under the following reaction conditions: pH₂ = 34 atm; T=373 K; substrate/catalyst ratio = 100, [ligand]/[metal]: 2,1; toluene (50 mL); R.P.M.: 430; t = 6 h. The activities varies from low to moderate range, where both ligands proved to be catalyst systems able to hydrogenate C=C and C=O bonds.     

A “Push–Pull” Stabilized Phosphinidene Supported by a Phosphine-Functionalized β-Diketiminato Ligand

The use of a bis(diphenyl)phosphine functionalized β-diketiminato ligand, [HC{(CH₃)C}₂{(ortho-[P(C₆H₅)₂]₂C₆H₄)N}₂]⁻ (PNac), as a support for germanium(II) and tin(II) chloride and phosphaketene compounds, is described. The conformational flexibility and hemilability of this unique ligand provide a versatile coordination environment that can accommodate the electronic needs of the ligated elements. For example, chloride abstraction from [(PNac)ECl] (E=Ge, Sn) affords the cationic germyliumylidene and stannyliumylidene species [(PNac)E]⁺ in which the pendant phosphine arms associate more strongly with the Lewis acidic main group element centers, providing further electronic stabilization. In a similar fashion, chemical decarbonylation of the germanium phosphaketene [(PNac)Ge(PCO)] with tris(pentafluorophenyl)borane affords a “push–pull” stabilized phosphinidene in which one of the phosphine groups of the ligand backbone associates with the low valent phosphinidene center.     

Characterizing closely spaced, complex disulfide bond patterns in peptides and proteins by liquid chromatography/electrospray ionization tandem mass spectrometry

Identifying the Cys residues involved in disulfide linkages of peptides and proteins that contain complex disulfide bond patterns is a significant analytical challenge. This is especially true when the Cys residues involved in the disulfide bonds are closely spaced in the primary sequence. Peptides and proteins that contain free Cys residues located near disulfide bonds present the additional problem of disulfide shuffling via the thiol-disulfide exchange reaction. In this paper, we report a convenient method to identify complex disulfide patterns in peptides and proteins using liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) in combination with partial reduction by tris(2-carboxyethyl)phosphine (TCEP). The method was validated using well-characterized peptides and proteins including endothelin, insulin, alpha-conotoxin SI and immunoglobulin G (IgG2a, mouse). Peptide or protein digests were treated with TCEP in the presence of an alkylation reagent, maleimide-biotin (M-biotin) or N-ethylmaleimide (NEM), followed by complete reduction with dithiothreitol and alkylation by iodoacetamide (IAM). Subsequently, peptides that contained alkylated Cys were analyzed by capillary LC/ESI-MS/MS to determine which Cys residues were modified with M-biotin/NEM or IAM. The presence of the alkylating reagent (M-biotin or NEM) during TCEP reduction was found to minimize the occurrence of the thiol-disulfide exchange reaction. A critical feature of the method is the stepwise reduction of the disulfide bonds and the orderly, sequential use of specific alkylating reagents.     

DNA-directed formation of peptide bond: a model study toward DNA-programmed peptide ligation

A model study of DNA-directed peptide ligation has been developed by transferring fluorescent reporting group from small molecule thioester to a DNA strand (template DNA) in the presence of a thiol-functionalized DNA strand (auxiliary DNA), mimicking the Native Chemical Ligation (NCL) reaction. This DNA-directed transfer shows dependence on the sequence complementarity of the two DNA strands, with in situ generated 4-thiolphenylmethyl functionalized oligonucleotide as the auxiliary DNA strand, under mild basic condition (pH=8.5), and with tris(2-carboxyethyl) phosphine hydrochloride (TCEP) as a reducing agent. Reactions with different amino acid α-thioesters resulted in varied transfer efficiencies from glycine to α-substituted amino acids. This study has provided the basic foundation to use DNA-programmed chemistry toward the chemical synthesis or unnatural modification of protein molecules.     

Tris(4-anisyl)phosphine as an Efficient and Practical Reagent for the Synthesis of (E)-2-Benzylidenesuccinates

Condensation of maleic anhydride or dimethyl maleate with benzylaldehydes controlled by tris(4‐anisyl)‐phosphine to synthesize dimethyl (E)‐2‐benzylidenesuccinates has been systematically investigated. The protocol gives the product with high stereoselectivity in moderate to good yields under mild conditions. A plausible mechanism has been proposed.     

Monitoring of vitamin C species in aqueous solution by flow injection analysis coupled with an on-line separation with reversed-phase column

Two vitamin C species of ascorbic acid and dehydroascorbic acid in aqueous solution were monitored by flow injection analysis. Ascorbic acid and dehydroascorbic acid were resolved by a reversed-phase column, and dehydroascorbic acid was reduced to ascorbic acid by an on-line post-column reaction with dithiothreitol. Both natural and reduced ascorbic acids were photometrically detected at 260 nm, and the two vitamin C species were simultaneously determined. The determination range was from 0 to 8 × 10⁻⁵ M with a limit of detection of 1.7 × 10⁻⁶ M. The proposed method was applied to the conversion monitoring of ascorbic acid and dehydroascorbic acid in weakly acidic to weakly alkaline aqueous solutions, as well as to the determination of the vitamin C in some beverage samples.     

PCl3- and organometallic-free synthesis of tris(2-picolyl)phosphine oxide from elemental phosphorus and 2-(chloromethyl)pyridine hydrochloride

In the superbase KOH/H₂O/toluene/phase-transfer catalyst system, 2-picolyl chloride, generated in situ from 2-(chloromethyl)pyridine hydrochloride, reacts with elemental phosphorus at 65–95?°C for 3?h to afford tris(2-picolyl)phosphine oxide in 50% yield. Single crystal X-ray analysis of the latter revealed one polymorph form of this tertiary phosphine oxide.     

Thiol-reactive dyes for fluorescence labeling of proteomic samples

Covalent derivatization of proteins with fluorescent dyes prior to separation is increasingly used in proteomic research. This paper examines the properties of several commercially available iodoacetamide and maleimide dyes and discusses the conditions and caveats for their use in labeling of proteomic samples. The iodoacetamide dyes BODIPY TMR cadaverine IA and BODIPY Fl C(1)-IA were highly specific for cysteine residues and showed little or no nonspecific labeling even at very high dye:thiol ratios. These dyes also showed minimal effects on pI's of standard proteins. Some iodoacetamide dyes, (5-TMRIA and eosin-5-iodoacetamide) and some maleimide dyes (ThioGlo I and Rhodamine Red C(2) maleimide) exhibited nonspecific labeling at high dye:thiol ratios. Labeling by both iodoacetamide and maleimide dyes was inhibited by tris(2-carboxyethyl)phosphine (TCEP); interactions between TCEP and dye were also observed. Thiourea, an important component of sample solubilization cocktails, inhibited labeling of proteins with iodoacetamide dyes but not with maleimide dyes. Maleimide dyes may serve as an alternative for labeling proteins where it is essential to have thiourea in the solubilization buffer. Covalent derivatization by BODIPY TMR cadaverine IA, BODIPY Fl C(1)-IA or Rhodamine Red C(2) maleimide was also demonstrated to be compatible with in-gel digestion and peptide mass fingerprinting by matrix assisted laser desorption/ionization-mass spectrometry and allowed successful protein identification.     

(3,5-Diallylisocyanuratomethyl)phosphine oxides and some of their properties

Reaction of sodium diallylisocyanurate with tris(chloromethyl)-, bis(chloromethyl)phenyl-, and (chloromethyl)diphenylphosphine oxides yields, depending on the stoichiometric ratio of the reagents, mono-, bis-, and tris(3,5-diallylisocyanuratomethyl)phosphine oxides.A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Science Center, Russian Academy of Sciences, 420083 Kazan, Tatarstan, Russia. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2773–2777, December, 1992.     

Strictly Regiocontrolled α-Monosubstitution of Cyclic Carbonyl Compounds with Alkynyl and Alkyl Groups via Pd-Catalyzed Coupling of Cyclic α-Iodoenones with Organozincs[]

The conditions for the Pd-catalyzed cross coupling of cyclic α-iodoenones, such as 2-iodo-2-cyclohexenone, with alkynylzincs have been optimized. The use of tris(o-furyl)phosphine (TFP) as a ligand and DMF as a solvent has led to the formation of α-alkynylenones in excellent yields. This optimized procedure has been applied to the synthesis of (±)-harveynone and (±)-tricholomenyn A in high yields. Investigation of related α-alkylation reactions using alkylzincs has revealed the following. Methylzinc and primary alkylzinc derivatives readily undergo Pd-catalyzed cross coupling with α-iodoenones. Although (s-Bu)₂Zn also undergoes Pd-catalyzed cross coupling, only the n-Bu-substituted products were obtained. α-Benzylation and α-homobenzylation can proceed satisfactorily, whereas allylzinc and propargylzinc derivatives undergo only addition to the carbonyl group. Although some promising results have been obtained in α-homoallylation and α-homopropargylation, these reactions need to be further improved.     

Reaction of Vinylpyridines with Active Modifications of Elemental Phosphorus in KOH/DMSO

The phosphorylation of 2-vinyl- and 4-vinylpyridines by white phosphorus and active modifications of red phosphorus (obtained by thermal polymerization of white phosphorus in the presence of graphite or the action of ionizing radiation in benzene) in the KOH/DMSO superbase system at room temperature leads to the formation of tris[2-(2-pyridyl)ethyl]- and tris[2-(4-pyridyl)ethyl]phosphine oxides in 58-72% yield. These oxides are promising ligands for design of metal complex catalysts. These vinylpyridines react less efficiently with ordinary red phosphorus and the yield of the corresponding tris(2-pyridylethyl)phosphine oxides does not exceed 10%.     

The effects of solution structure on the surface conformation and orientation of a cysteine-terminated antimicrobial peptide cecropin P1

The surface structure of an antimicrobial peptide, cecropin P1, immobilized to a gold surface via a terminal cysteine residue was investigated. Using reflection-absorption infrared spectroscopy, surface plasmon resonance, and X-ray photoelectron spectroscopy, the effects of pH, solution conformation, and concentration on the immobilized peptide conformation, average orientation, and surface density were determined. Under all conditions investigated, the immobilized peptides were α-helical in a predominately flat, random orientation. The addition of the reducing agent Tris(2-carboxyethyl) phosphine hydrochloride to the buffer resulted in a twofold increase in immobilized peptide surface density.     

Automated Determination of Hydrogen Peroxide at the Micro-Molar Level in Rainwater and Snow Using a Stopped-Flow Approach in a Hybrid Sequential Injection/Flow Injection Manifold

A new automated method is reported for the determination of H₂O₂ in real samples. The method is based on the quenching effect of the analyte on the reaction between tris(2-carboxyethyl)phosphine (TCEP) and Ellman's reagent (DTNB). All necessary steps were accomplished under flow conditions using a hybrid sequential injection (SI)/flow injection (FI) setup. The sensitivity was enhanced by applying a stopped-flow step (120 s) in order to promote the reaction between H₂O₂ and TCEP. The proposed analytical protocol was validated for linearity (10–75 µmol L^?1), limits of detection (c _L = 1.0 µmol L^?1), quantitation (c _Q = 3.3 µmol L^?1), precision (s _r = 1.3–1.7%), accuracy, and selectivity. It was then applied successfully to the analysis of H₂O₂ in spiked rainwater and snow samples.     

Dinuclear copper complexes of pyridylphenylphosphine ligands: Characterization of a mixed-valence Cu/Cu dimer

Homo bi-copper complexes [Cu₂{PhP(2-py)₂}₂(NO₃)₃] (1) and [Cu₂{P(2-py)₃}₂Cl₂] (2), were synthesized from the reaction of Cu(NO₃)₂·3H₂O and CuCl₂·2H₂O with their corresponding 2-pyridylphosphine ligands. Compound 1 has a mixed valence Cu(I)-Cu(II) core with electron acceptor phosphine atoms and two NO₃⁻ anions coordinated in a monodentate fashion to Cu(I), giving it a distorted tetrahedral geometry. The environment of Cu(II) in 1 is composed of four nitrogen atoms from pyridyl and another NO₃⁻ anion in a square pyramidal geometry. This complex shows luminescence and a low energy absorption band at 969 nm corresponding to intermetallic electron transfer between the copper centers. Complex 2 was prepared from the treatment of copper(II) chloride with tris(2-pyridyl)phosphine, producing a binuclear copper complex which possesses a crystallographic inversion center. The copper geometry in this complex is distorted tetrahedral with coordination of one Cl⁻, two nitrogens from one bridging tris(2-pyridyl)phosphine ligand and one P atom from the other bridging tris(2-pyridyl)phosphine ligand, in a similar way observed in related complexes. The products have been characterized by spectroscopic methods and also by the single-crystal X-ray diffraction method.     

One-pot synthesis of ultra-branched mixed tetradentate tripodal phosphines and phosphine chalcogenides

Ultra-branched mixed tetradentate tripodal phosphines and phosphine chalcogenides have been synthesized by the exhaustive regioselective addition of secondary phosphines, phosphine sulfides and phosphine selenides to available tris(4-vinylbenzyl)phosphine oxide under free-radical conditions (UV irradiation or AIBN) in good to excellent yields.     

Ambidentate coordination of the tripyridyl ligands 2,2′:6′,2″-terpyridyl,tris(2-pyridyl)-amine,tris(2-pyridyl)methane and tris(2-pyridyl)phosphine to carbonylrhenium centres: Structural and spectroscopic studies

The reactions of [Re(CO)₅Cl] with the ligands tpy (2,2′:6′,2″-terpyridine), py₃N {tris(2-pyridyl)-amine}, py₃CH {tris(2-pyridyl)methane}, and py₃P {tris(2-pyridyl)phosphine} in toluene solution realize compounds with the general formulation [Re(ligand)(CO)₃Cl] in which the tripyridyl ligands are bidentate. X-ray structural determinations of fac-[Re(typ)(CO)₃Cl].H₂O and fac-[Re(py₃N)(CO)₃Cl] confirm these assignments. [Re(tpy)(CO)₃Cl].H₂O (C₁₈H₁₃ClN₃O₄Re) is monoclinic, space group P2₁/n, with cell dimensions a = 7.432(2) Å, b = 17.016(4) Å, c = 14.466(2) Å, β = 93.51(2)°, and Z = 4; full-matrix least-squares refinement on 2435 reflections with I ? 2.5σ(I) converged to a final R = 0.028 and R_w = 0.029. [Re(py₃N)(CO)₃Cl] (C₁₈H₁₂ClN₄O₃Re) is triclinic, space group P1 with cell dimensions a = 13.761(2) Å, b = 14.636(6)Å, c = 11.110(2) Å, α = 110.70(2)°, β = 102.45(2)°, γ = 107.48(2)°, and Z = 4; full-matrix least-squares refinement on 3459 reflections with I ? 2.5σ(I) converged to a final R = 0.038 and R_w = 0.039. If the synthetic procedure is undertaken under irradiation by visible light, for the ligand py₃N a species [Re(py₃N)(CO)₂Cl] (characterized by infrared spectroscopy and conductance measurements) is also formed, in which the ligand py₃N is tridentate. No analogous tridentate species is formed with the ligands tpy or py₃P, although there is evidence that it also forms for py₃CH.