首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Macroscopic pH‐responsive self‐assembly is successfully constructed by polyacrylamide(pAAm)‐based gels carrying dansyl (Dns) and β‐cyclodextrin (βCD) residues, which are represented as Dns‐gel and βCD‐gel, respectively. Dns‐gel and βCD‐gel assemble together at pH ≥ 4.0, but disassemble at pH ≤ 3.0. The adhesion strengths for pairs of Dns‐gel/βCD‐gel increase with increasing pH. The fluorescence study on the model system of pAAm modified with 1 mol% Dns moieties (pAAm/Dns) reveals that Dns residues are protonated at a lower pH, which results in the reduction in binding constant (K) for Dns residues and βCD.

  相似文献   


2.
A strain‐induced microphase morphology has been established by the melt drawing process in a high molecular weight asymmetric polystyrene‐block‐poly(vinyl‐2‐pyridine) (PS‐b‐P2VP) diblock copolymer. For the first time to the best knowledge of the authors, the melt drawing process has been applied to block copolymers to produce free‐standing, ultrathin block copolymer films with a thickness of ≈100 nm. Intriguingly, during the melt drawing of the polymer a global strain‐induced unidirectional order of the microphase separated needle‐like domains of the block copolymer was generated. This morphology consists of a PS matrix with embedded highly oriented P2VP needle‐like domains oriented parallel to the drawing direction. The needle‐like morphology is explained by a simplified extended chain model of the diblock copolymer chains. Annealing of the films leads to a transition from the strain‐induced needle‐like morphology toward the quasi‐equilibrium sphere‐like morphology.

  相似文献   


3.
RAFT inverse miniemulsion polymerization is demonstrated for the first time as an alternate way to synthesize hydrophilic polymer latexes. The kinetic behavior of inverse RAFT miniemulsion polymerization of acrylamide is similar to that observed in aqueous RAFT solution polymerization. A water‐soluble initiator provides better control than a lipophilic initiator in inverse RAFT miniemulsion polymerization under the conditions used here.

  相似文献   


4.
Highly efficient and well‐controlled ambient temperature reversible addition–fragmentation chain transfer (RAFT) polymerization is readily carried out under environmentally friendly mild solar radiation. This discovery has significantly extended studies from man‐made separated‐spectroscopic‐emission UV‐vis radiation (Macromolecules 2006 , 39, 3770) to natural continuous‐spectroscopic‐emission solar radiation for ambient temperature RAFT polymerization.

  相似文献   


5.
A series of π‐conjugated polymers linked by benzocarborane (1,2‐(buta‐1′,3′‐diene‐1′,4′‐diyl)‐1,2‐dicarbadodecaborane) were synthesized via Sonogashira–Hagihara polycondensation reaction. The opened molecular structure of diiodo monomer containing benzocarborane resulted in fast polymerization and high molecular weights. The obtained polymers were fully characterized by 1H, 13C, and 11B NMR spectroscopies. UV‐vis absorption and photoluminescence studies revealed the acceptor‐profile of benzocarborane. Unlike the polymers linked by o‐carborane, these polymers exhibited strong luminescence in the solution state, presumably because the inductive effect of carborane is dominant, rather than cage‐π interactions.

  相似文献   


6.
Strong electrolyte temperature‐sensitive hydrogels were synthesized by radiation polymerization using N‐isopropylacrylamide and sodium 2‐acrylamido‐2‐methylpropanesulfonate. The influence of irradiation dose and mole ratio of the monomers was examined by swelling measurements in aqueous solution and organic solvents. The hydrogels without any pollution were applied in concentrating protein.

Effect of irradiation dose on swelling ratios of P(NIPA‐co‐NaAMPS) hydrogels.  相似文献   


7.
Summary: An O‐hexyl‐3,5‐bis(terpyridine)phenol ligand has been synthesized and transformed into a hexagonal Zn(II)‐metallomacrocycle by a facile self‐assembly procedure capitalizing on terpyridine‐Zn(II)‐terpyridine connectivity. The structural composition was confirmed by NMR and mass spectral techniques; photo‐ and electroluminescence properties were also investigated. The OLED device shows green electroluminescent emission at 515 nm with a maximum luminance of 39 cd · m−2 and maximum efficiency of 0.16 cd · A−1.

Structure and electroluminescent properties of the metallomacrocycle investigated.  相似文献   


8.
A close correllation between molecular‐level interactions and macroscopic characteristics of polymer networks exists. The characteristics of the polymeric hydrogels assembled from β‐cyclodextrin (β‐CD) and adamantyl (AD) substituted poly(acrylate)s can be tailored through selective host–guest complexation between β‐CD and AD substituents and their tethers. Dominantly, steric effects and competitive intra‐ and intermolecular host–guest complexation are found to control poly(acrylate) isomeric inter‐strand linkage in polymer network formation. This understanding of the factors involved in polymeric hydrogel formation points the way towards the construction of increasingly sophisticated biocompatible materials.

  相似文献   


9.
Summary: A novel non‐aqueous emulsion system, consisting of cyclohexane as the continuous and acetonitrile as the dispersed phase, is described. Stabilization of the system can be achieved by using polyisoprene‐block‐poly(methyl methacrylate) copolymers as emulsifiers. The suitability of this system for performing water‐sensitive, catalytic, and oxidative polymerizations and polycondensations is demonstrated by the synthesis of poly(3,4‐ethylenedioxythiophene), poly(thiophene‐3‐yl‐acetic acid), and polyacetylene. In all cases spherical nanoparticles with diameters as small as 23 nm can be obtained.

  相似文献   


10.
The preparation of novel cationic β‐cyclodextrin polymers (CPβCDs) and its complexes with butylparaben and triclosan were reported in this paper. FT‐IR and two‐dimensional (2D) 1H–1H gradient correlated spectroscopy (gCOSY) NMR spectra confirmed that the antibiotics could be included inside the lipophilic cavities of CPβCDs. The water solubility of the antibiotics was improved significantly after inclusion with CPβCDs. The results also suggest that it was easier for butylparaben, which had relatively small molecular size, to form the complexes with CPβCDs than triclosan. Due to the targeting effect after the inclusion with cationic CPβCDs, the anti‐microbial activity of butylparaben was also enhanced substantially. However, similar improvement was not obvious for triclosan.

  相似文献   


11.
12.
Summary: Thermosensitive polymer nanotubes can be fabricated within an aminopropylsilane‐modified porous anodic aluminum oxide membrane by surface‐initiated atom transfer radical polymerization (ATRP) followed by template removal. DSC experiments prove that the synthesized PNIPAM‐co‐MBAA copolymer nanotubes have a reversible thermosensitive behavior. The temperature‐induced changes in dimension and shape of the nanotubes were studied by AFM in real time in an aqueous environment. It indicates that the nanotubes undergo a shape alteration from an “ellipse” to “circular” shape in water upon heating to LCST or above.

DSC curves of PNIPAM‐co‐MBAA nanotubes.  相似文献   


13.
Polymer translocation through a narrow pore is investigated using a particle‐based dissipative particle dynamics (DPD) method. A rigid core is included in each particle to avoid particle interpenetration problems based on the original DPD method. Electrostatic interactions of charged particles are simply represented via screened Coulombic interactions. The average translocation time τ versus polymer length N satisfies the scaling law τNβ. The scaling exponent β depends on solvent quality. The results demonstrate that solvent quality exerts a considerable influence on the dynamics of translocation of polymers. The findings may help facilitate understanding of the dynamic behaviors of various polymer and DNA molecules during translocation processes.

  相似文献   


14.
A versatile approach to fabricate monodisperse poly[styrene‐co‐(divinyl benzene)] (PS‐co‐DVB) microcapsules that contain a single gold nanoparticle (AuNP) has been demonstrated. Using the PS‐co‐DVB microcapsule as a microreactor, aqueous HAuCl4 and NaBH4 solutions are subsequently infiltrated. The size of the resulting AuNP inside of the PS‐co‐DVB microcapsules is easily tunable by controlling the repeated infiltration cycles of aqueous HAuCl4 and NaBH4. PS‐co‐DVB microcapsules that contain a single silver and palladium nanoparticle are also obtained by following a similar protocol.

  相似文献   


15.
Chitosan grafted oligo(L ‐lactic acid) copolymers with different length of side chain were prepared through the reaction of terminal aldehyde group of oligo(L ‐lactic acid) (OLLA) and amino groups of chitosan. The mean molecular mass of the grafting OLLA chain was ca. 600 ~ 5 000. The graft copolymers are soluble in DMSO, DMF and acetic acid. The synthesis method and structure described here provide chitosan‐g‐OLLA copolymers with broad applicability.

Structure of chitosan‐g‐oligo(L ‐lactic acid).  相似文献   


16.
A rod‐coil block copolymer consisting of poly(3‐hexylthiophene) (P3HT) and poly(N‐vinylcarbazole) (PVK) ( P3HT‐ b ‐PVK ) in a single molecular architecture is prepared as the first example for WOLEDs. By obtaining the phase separated domains in thin film of the resulting block copolymer, it is possible to suppress energy transfer from PVK as wide bandgap units to P3HT as low bandgap blocks, yielding dual emissions for white electroluminescence with CIE coordination of (0.34, 0.33).

  相似文献   


17.
Chromophore‐containing dendritic structures (G1, G2) are utilized to intercalate layered silicates, which results in a large d‐spacing up to 126 Å. An exfoliated morphology is obtained by mixing the dendritic structure intercalated layered silicates with polyimide in N,N‐dimethylacetamide solution. The dendritic structures attached on the clay template would arrange in a non‐centrosymmetric manner. This self‐assembled arrangement brought about the electro‐optical coefficients of 5–6 pm · V−1 for these relatively low chromophore‐containing organic/inorganic nanocomposites without resorting to poling. Excellent temporal stability (100 °C) is also achieved.

  相似文献   


18.
Summary: We have successfully constructed a redox‐responsible hydrogel system by combination of β‐cyclodextrin (β‐CD), dodecyl‐modified poly(acrylic acid) [p(AA/C12)], and a redox‐responsive guest, ferrocenecarboxylic acid (FCA). In the reduced state of FCA, the ternary mixture exhibited a gel‐like behavior, whereas, in its oxidized state, the mixture exhibited a sol behavior.

Conceptual illustration for the redox‐responsive hydrogel system.  相似文献   


19.
20.
Functionalizing and controlling nanostructures resulting from block copolymer self‐assembly are key factors in defining their application. In this work, a simple but quite general route to achieve both goals simultaneously is discussed. In thin films of polystyrene‐block‐poly(vinyl pyridine) (PS‐b‐PVP) with small concentrations of a gold salt, the salt is found to complex with the PVP block which leads to an orientation of the microdomains normal to the surface after solvent annealing together with functionalization. By increasing the amount of gold salt, on the other hand, micelles are found to form in solutions leading to a range of different morphologies in the thin films.

  相似文献   


设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号