Heterogeneous ‘Organoclick’ Derivatization of Polysaccharides

Summary: A simple method for the direct catalytic heterogeneous modification of polysaccharides is presented. The novel method is exemplified by the combination of organic acid‐catalyzed esterification and copper‐catalyzed Huisgen reaction (click chemistry) to attach a fluorescent probe to solid cellulose. The heterogeneous ‘organoclick’ derivatization of cellulose allows for a mild, highly modular surface modification of cellulose under environmentally benign reaction conditions.

Schematic of the combined organic acid‐catalyzed esterification and copper‐catalyzed Huisgen reaction (click chemistry) to modify a polysaccharide with a fluorescent probe.     

Characterization of Chlorine‐, Amine‐ and Acrylate‐Functionalized TEMPO‐Capped and Bis‐TEMPO‐Capped Polystyrenes Using MALDI‐TOF MS

Chlorine‐functionalized TEMPO‐capped polystyrenes were investigated using the matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) technique. Amine‐ and acrylate‐functionalized agents and bifunctional TEMPO‐capped polystyrene were also analyzed to demonstrate the applicability of this method. Using this technique allowed to analyze the conversion of the chlorine function to an acrylate function, which was previously difficult to detect with other methods.

MALDI‐TOF mass spectrum of a polystyrene described in this article, as obtained with DHB as the matrix.     

Fabricating Super‐Hydrophobic Lotus‐Leaf‐Like Surfaces through Soft‐Lithographic Imprinting

Summary: A soft‐lithographic imprinting approach to fabricate super‐hydrophobic surfaces has been developed in this work. In this process, fresh lotus leaves were used as masters and PDMS stamps were prepared by replica molding against the lotus‐leaf surfaces. By using the stamps and an epoxy‐based azo polymer solution as “ink”, the mimicked lotus‐leaf surfaces made of the polymer were fabricated by pressing the featured faces of the stamps against “inked” substrates and drying under a proper condition after peeling off the stamps. The lotus‐leaf‐like surfaces show super‐hydrophobic characteristics with the water contact angle higher than 150° and contact angle hysteresis less than 3°.

SEM images of lotus‐leaf‐like papillary structures on the imprinted surface.     

Synthesis of a Novel Glycopeptide by Polymeranalogous Reaction of Gelatin with Mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin and its Supramolecular Properties

A synthetic model glycoprotein was successfully synthesized using gelatin and mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin which were reacted under microwave conditions in basic media. The resulting glycoprotein is observed to form intermolecular inclusion complexes through complexation of the aromatic moieties along the polymer chain by the attached cyclodextrins. This phenomenon was analyzed and proven by 2D NMR spectroscopy (ROESY) and dynamic light scattering (DLS). Above the denaturation temperature, a strong increase of the hydrodynamic diameter was found due to enhanced supramolecular agglomeration. Such a novel glycoprotein with supramolecular self‐recognition would be promising in biomedical applications serving as a drug‐delivery basis polymer.

     

Poly(4‐vinylpyridine) Nanocrosslinked by Polyhedral Oligomeric Silsesquioxane

Summary: Octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) was used as the crosslinking agent to prepare the nanocrosslinked poly(4‐vinylpyridine) (P4VP) with POSS content up to 55.2 wt.‐%. The formation of the crosslinked structure is ascribed to the macromolecular reaction between pyridine rings of P4VP and epoxide groups of OpePOSS. The POSS‐crosslinked P4VP displayed enhanced glass transition temperatures (T_gs) and an improved thermal stability in terms of the results of thermal analysis.

Crosslinking of poly(4‐vinylpyridine) with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane.     

Crystal‐to‐Crystal Photoinduced Electron Transfer Generating Photoacids to Formulate Water‐Borne Photopolymers

Casting a photopolymer solution to form a film, followed by imagewise photoirradiation and subsequent wet development, leads to photolithography. Whereas the wet development is achievable with aqueous alkali, the emission of an organic solvent as a volatile organic compound (VOC) is usually inevitable during the film casting because ingredients of common photopolymers are insoluble in water. We show here a prototype of water‐borne photopolymers dispersed with milled nanoparticles of poorly water‐soluble photoacid generators (PAGs), which undergo solid‐state photolysis to liberate a photoacid to make a poly(vinyl alcohol) film insoluble in water with the aid of an acid‐sensitive crosslinking reagent. The photolysis of onium‐type PAGs is sensitized in the solid state simply by comilling with water‐insoluble sensitizers to extend spectral sensitivity of this kind of photopolymers. Fluorescence quenching measurements revealed that the solid‐state sensitization occurs through exciton migration in sensitizer particles followed by electron transfer to PAG particles.

     

On‐Chip Alginate Microencapsulation of Functional Cells

We report the use of a PTFE‐based microfluidic device for the encapsulation of living, therapeutically‐active cells within monodisperse alginate microspheres. We present a novel microfluidic platform and a flexible experimental method for the production of alginate microspheres. Cell lines HEK293, U‐2 OS and PC12 were separately encapsulated using this method, with minimal loss of cell viability.

     

Modeling of Network Formation in Nitroxide‐Mediated Radical Copolymerization of Vinyl/Divinyl Monomers Using a Multifunctional Polymer Molecule Approach

A mathematical model for the kinetics of copolymerization with crosslinking of vinyl/divinyl monomers in the presence of stable nitroxyl radicals is presented. A reaction scheme considering multifunctional polymer molecules is proposed. The Flory‐Stockmayer theory is used for the post‐gelation period. Average crosslink and cyclization densities are calculated using two different approaches. Good agreement between predicted profiles and experimental data from our and other groups is observed in all cases. Overall monomer concentration, controller/initiator ratio, and crosslinker initial concentration are found to be the governing factors for the development of average crosslink and cyclization densities and therefore for the homogeneity of the resulting polymer network.

     

Photo‐Induced Solid‐State Crosslinking of Electrospun Poly(vinyl alcohol) Fibers

Summary: Poly(vinyl alcohol) (PVA) was derivatized by polymer analogous reaction with thienyl acryloyl chloride and processed to submicrometer fibers by electrospinning from aqueous solution. Water solubility of otherwise water‐soluble PVA fibers was reduced considerably by UV crosslinking of thienyl acrylate modified PVA fibers in the solid state. Water stability of these crosslinked fibers was proven by water steam test at 95 °C.

UV/Vis spectrum of PVA‐Thio fibers irradiated for different periods at 300 nm.     

A New Approach to High‐Capacity Functionalized Monoliths via Post‐Synthesis Grafting

A new approach toward the grafting of norborn‐2‐ene derivatives onto ROMP‐based monolithic supports has been developed. Grafting yields were governed by three variables, which are the catalyst, temperature and the crosslinker used. Three different catalysts, three grafting temperatures, as well as two different crosslinkers were investigated. By optimizing all variables 4‐fold amounts of grafted monomers compared to previously reported procedures were obtained reaching values of 1.04 mmol of monomer/g monolith.

Grafted monolithic supports applying the method reported here.     

Synthesis and Characterization of β‐Cyclodextrin Based Functional Monomers and its Copolymers with N‐isopropylacrylamide

Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.

Synthesis route of monovinyl β‐CD monomers.     

Supramolecular Assembly of Gold Nanoparticles Mediated by Polypseudorotaxane with Thiolated β‐Cyclodextrin

Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.

A typical TEM image of gold nanoparticle aggregate 2 .     

Synthesis and Characterization of a Novel Calix[4]arene‐Based Periodic Mesoporous Organosilica

Summary: A new calix[4]arene‐based periodic mesoporous organosilica has been synthesized using tetraethoxysilane (TEOS) and a calix[4]arene‐based silane monomer as the precursors and cetyltrimethylammonium bromide (CTAB) surfactant as the structure‐directing template, and is shown to be capable of visual detection and entrapment of NO₂.

Synthesis of the novel mesoporous organosilica material containing covalently bound tetra‐O‐alkylated calix[4]arene hosts.     

Glucosamine Hydrochloride Functionalized Water‐Soluble Conjugated Polyfluorene: Synthesis,Characterization, and Interactions with DNA

Novel glucosamine hydrochloride functionalized water‐soluble conjugated polyfluorene was easily synthesized through Cu(I)‐catalyzed azide/alkyne “click” ligation and Suzuki coupling polymerization. The water‐solubility and biocompatibility of the polymer were improved after grafting glucosamine hydrochloride to the side chains of the conjugated polymer. As a fluorescent model system of chitosan, its interaction with single‐stranded DNA was studied by spectrofluorometric titration.

     

Preparation of Poly(1,3,4‐oxadiazole‐2,5‐diyl‐1,2‐vinylene) via Anionic Mechanism

2,5‐Bis(chloromethyl)‐1,3,4‐oxadiazole was synthesized and dehydrohalogenation of this model compound was investigated under various base conditions. The formation of an intermediate with quinodimethane‐type structure is suggested for reaction in EtONa/EtOH. Polymerization of this intermediate proceeds via an anionic mechanism to form poly(1,3,4‐oxadiazole‐2,5‐diyl‐1,2‐vinylene). Polymerization at a toluene/water interface results in shorter polymerization times, milder conditions, higher molecular weights, higher yields and fewer defects in the polymer as compared to the corresponding polycondensation route.

     

Laser‐Induced Crosslinking of Ultra‐Low‐ and High‐Density Polyethylene

The use of laser radiation to initiate the crosslinking process in ultra low‐density polyethylene (ULDPE) and high‐density polyethylene (HDPE) was evaluated. The process was found to be most effective for pulsed laser irradiation when the polymer was traced with a photoinitiator: 4‐chlorobenzophenone (CBP). The gel content measurements proved that crosslinking took place in all the irradiated samples. The degree of crosslinking was measured for different values of irradiation energy, temperature, photoinitiator concentration and the nature and type of crosslinking agents. The effects of all these parameters on the degree of crosslinking and the consequent effects on mechanical properties of the polymers were analyzed. Also found in the present study is the fact that a better efficiency of crosslinking was achieved at longer laser irradiation wavelength. The ultimate tensile stress and elongation at fracture were measured for all cross‐linked samples and compared with those of the controlled ones.

     

Towards the Generation of Self‐Healing Materials by Means of a Reversible Photo‐induced Approach

Photo‐induced reversibility as a tool for self‐healing: a reversible photo‐induced dendritic macromonomer was synthesized and proven to form networks with different features depending on the crosslinking conditions. While networks formed from aqueous systems exhibited a reversible change in their crosslinking degree, networks generated in bulk underwent fully reversibility. The latter was then exploited for generating self‐healing materials by means of a photo‐induced treatment.

     

Layer‐by‐Layer Assembled Nanotubes as Biomimetic Nanoreactors for Calcium Carbonate Deposition

Enzyme‐loaded magnetic polyelectrolyte multilayer nanotubes prepared by layer‐by‐layer assembly combined with the porous template could be used as biomimetic nanoreactors. It is demonstrated that calcium carbonate can be biomimetically synthesized inside the cavities of the polyelectrolyte nanotubes by the catalysis of urease, and the size of the calcium carbonate precipitates was controlled by the cavity dimensions. The metastable structure of the calcium carbonate precipitates inside the nanotubes was protected by the outer shell of the polyelectrolyte multilayers. These features may allow polyelectrolyte nanotubes to be applied in the fields of nanomaterials synthesis, controlled release, and drug delivery.