Poly(2,5‐thienylene vinylene) (PTV), an insoluble conjugated polymer, can be readily prepared in various shapes of different nanodimensions by the chemical vapor deposition polymerization of 2,5‐bis(chloromethyl)thiophene. The bischloromethyl monomer in the vapor phase is activated at 600 °C. The activated monomer vapor is deposited at room temperature on the surface of various substrates to prepare polymeric films, fibers, tubes etc., which are then thermally converted into PTV. PTV thin films can be carbonized thermally to produce graphitic compositions that contain sulfur atoms. Electrical conductivities of FeCl‐doped PTV and carbonized films are reported.
CuII compounds coordinated octahedrally with nitriles and associated with bulky, non‐coordinating counter ions can be applied in the polymerization of isobutene at 30 °C. High yields and a high content of terminal double bonds are reached in the resulting highly reactive polyisobutylenes, while the molecular masses are moderate. Two of the coordinating nitriles are more weakly coordinated than the other four, as can be concluded from an exemplary X‐ray structure and from vibrational spectra, thus providing easily accessible sites for substrate coordination.
New photosensitive alkoxyamines have been designed using molecular orbital calculations to improve the selective C O versus N O cleavage. The targeted light‐sensitive alkoxyamine is synthesized in one step and its reactivity under UV has been investigated using both ESR and LFP. The ability of this alkoxyamine to control the photopolymerization of n‐butyl acrylate is evidenced through a process called nitroxide‐mediated photopolymerization NMP2. The selected alkoxyamine is finally used to prepare covalently bonded multilayered micropatterns. This original application highlights the high potential of this technique for some specific applications that require spatial control.
The electrical conductivity of composites of exfoliated graphite nanoplatelets (GNPs), including bromine‐doped GNP, and conjugated polyacrylonitrile has been investigated. The focal point is the dual nature of the graphite nanoparticles, which exhibit both intrinsic electrical conductivity and doping capability of semi‐conductive polymers such as conjugated polyacrylonitrile to form charge‐transfer complexes. The conductivity is particularly enhanced in conjugated polyacrylonitrile composites (e.g., with 6 wt.‐% graphite nanoplatelets) where the value rises from 1 × 10−10 to 2 × 10−3 S · cm−1, which reflects jointly the conductivity of the doped semi‐conductive polymer together with the percolation‐based conductivity of the particles.
Polyimide/diamond nanocomposites have been synthesized from 4,4′‐diaminodiphenyl ether (ODA) and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA). All the polyimides show non‐crystalline X‐ray diffraction. The frequent occurrence of particular interatomic distances (R) denoted by the non‐crystalline X‐ray diffraction maxima are determined. An ultramicro‐indentation technique is employed to evaluate the effects of nano‐diamond particles on the indentation behavior of polyimides. Indentation size effect is observed and discussed.
It is demonstrated that an optically transparent and electrically conductive polyethylene oxide (PEO) film is fabricated by the introduction of individualized single‐walled carbon nanotubes (SWNTs). The incorporated SWNTs in the PEO film sustain their intrinsic electronic and optical properties and, in addition, the intrinsic properties of the polymer matrix are retained. The individualized SWNTs with smaller diameter provide high transmittance as well as good electrical conductivity in PEO films.
We demonstrate a strategy for using an optical stimulus to trigger the dissociation of block copolymer (BCP) vesicles in aqueous solution. The BCP, comprising hydrophilic poly(ethylene oxide) (PEO) and a block of poly(methacrylic acid) bearing a number of spiropyran methacrylate comonomer units (P(MAA‐co‐SPMA)), was allowed to firstly self‐assemble into large vesicles in aqueous solution at pH = 3 with protonated carboxylic acid groups, and then become kinetically stable at pH = 8 due to the glassy vesicle membrane of P(MAA‐co‐SPMA). Fast dissociation of the vesicles was achieved through a cascade of events triggered by UV‐induced isomerization from neutral spiropyran to charged merocyanine in the membrane.
A simple and efficient Diels‐Alder (DA) reaction on carbon material has been demonstrated. The present work involves single and multiwall carbon nanotubes (CNTs), as well as Herringbone carbon nanofiber. The CNTs show a dual nature of reactivity in DA reaction, i.e., they behave both as dienophile and diene with furfuryl groups and maleic anhydride derivatives, respectively. Various functional groups, including alcohol, amine, epoxy, carboxylic and ester, have been introduced on the carbon materials. The results suggest that the reactivity of CNT in DA reaction may resemble the chemistry of small molecules.
Summary: Nitroxide‐mediated polymerization of styrene in a continuous tubular reactor has been demonstrated for the first time. The polymerization kinetics in the tubular reactor are similar to those in a batch reactor. The number average molecular weight increases linearly with conversion, and chain extension experiments were successful, indicating that the living nature of the polymerization is maintained in the tubular reactor.
Evolution of molecular weight as measured by GPC for chain‐extended latex in continuous tubular reactor. 相似文献
A natural and synthetic layered silicate (LS) was modified with trihexyltetradecyl‐phosphonium tetrafluoroborate (an ionic liquid) via a cationic exchange reacation. The exchange reaction and loading of modifier was investigated using a combination of WAXD, inductively coupled plasma‐optical emmission spectroscopy (ICP‐OES) and thermogravimetric analysis (TGA). The thermal stability of the modified LS was enhanced by up to 150 °C, when compared with conventional quaternary ammonium cations, making melt mixing of such modified nanoclays possible with poly(ethylene‐terephthalate) (PET).
A model for olefin–diene copolymerization and long chain branch formation was developed. The model shows that the number‐average molecular weight and branching density increases linearly with time in a semi‐batch polymerization, while the polydispersity depends on the diene content in the polymer and on the polymerization time. For low diene fractions or low polymerization times, the polydispersity increases linearly with time. For higher diene contents, the polydispersity increases exponentially with polymerization time after a critical polymer concentration is reached. The calculated distributions of branched species indicate that diene content influences the amount of highly branched chains produced in the polymerization, markedly broadening the distribution of molecular weight and leading to gel formation.
Weight distribution of branched species after 30 min of polymerization. 相似文献
A new polyhedral oligomeric silsesquioxane macromer, octakis[N‐(6‐aminopyridin‐2‐yl)undecanamide‐10‐dimethyl‐siloxy]silsesquioxane (POSS‐C11‐Py), containing eight diaminopyridine arms, is able to self‐assemble to form a physically crosslinked polymer‐like structure with good mechanical properties (tensile strength = 46.1 MPa, tensile modulus = 0.58 GPa, elongation = 49.3%) through quadruple hydrogen bonding interactions between these arms. POSS‐C11‐Py is the first organic/inorganic supermolecule possessing polymer‐like mechanical properties as a result of self‐complementary interactions, providing a potential route toward the design and fabrication of polymer‐like supramolecular materials.
This review covers the literature concerning the modification of polysaccharides through controlled radical polymerizations (NMP, ATRP and RAFT). The different routes to well‐defined polysaccharide‐based macromolecules (block and graft copolymers) and graft‐functionalized polysaccharide surfaces as well as the applications of these polysaccharide‐based hybrids are extensively discussed.
A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).
The identification and control of a critical stage of polyaniline “nanotube” self‐assembly is presented, namely the granular agglomeration or growth onto nanorod templates. When the synthesis pH is held above 2.5, smooth insulating nanorods exhibiting hydrogen bonding and containing phenazine structures are produced, while below pH 2.5, small 15–30 nm granular polyaniline nanoparticles appear to agglomerate onto the available nanorod surface, apparently improving conductivity of the resulting structures by three orders of magnitude. This finding affects both fundamental theories of polyaniline nanostructure self‐assembly and their practical applications.
Summary: A new strategy was developed to prepare disorderly exfoliated nanocomposites, in which a soft siloxane surfactant with a weight‐average molecular weight ( ) of 1 900 was adopted to modify the clay. The modified clay slurry was then mixed with silicone rubber by hand, and exfoliation was achieved. The proposed mechanism thereof was verified by TEM and XRD. The physical entanglement of the soft siloxane surfactant plays a vital role in the diffusion and intercalation of the matrix molecules during the compounding of the slurry‐polymer mixture. This simple method is applicable to other silicone‐based materials reinforced by clay.
TEM micrograph of silicone rubber/clay‐sil nanocomposite. 相似文献
A novel chlorotitanium calix[4]arene complex was synthesized and tested, without activator, as catalyst for the polymerization of L ‐ and rac‐lactide under solvent‐free conditions. The catalyst displayed high activity, which depended on the monomer‐to‐catalyst molar ratio, and led to highly isotactic PLLA. Despite concomitant transesterification during the polymerization, polylactide formation was well‐controlled, the molar mass distribution indexes remaining in the restricted range of 1.2–1.4.
Summary: Coexisting bicontinuous morphologies, one ordered and one disordered, are investigated in a macrophase‐separated poly(styrene‐block‐isoprene) diblock copolymer/homopolystyrene (SI/hS) blend. Two‐phase behavior is attributed to the relatively high hS/S mass ratio (0.92). According to its crystallographic signature and channel coordination as discerned from three‐dimensional (3D) images generated by transmission electron microtomography (TEMT), the ordered morphology is classified as gyroid. The 3D local and global topological characteristics of both bicontinuous morphologies as measured directly from TEMT images are reported. The disordered morphology is further compared with molecular‐field simulations to ascertain the spatial distribution of the constituent species within the blend, thereby demonstrating the utility of high‐resolution 3D imaging coupled with molecular‐level simulations.
Porous polymeric monoliths were prepared via electron beam triggered free radical polymerization of (meth)acrylates. Post‐synthesis functionalization of these supports was accomplished via electron beam initiated free radical graft polymerization of methacryloyl‐substituted NHC precursors. The grafted precursors were converted into the corresponding copper complexes. Cu‐loadings were between 1.3 mg · g−1 and 1.5 mg · g−1. These supported catalysts were used in selected CO hydrosilylation and cyanosilylation reactions using a continuous flow setup.
