Gold‐Loaded Carbon Nanoparticles from Poly(vinyl alcohol)‐b‐poly(acrylonitrile) Non‐Shell‐Cross‐Linked Micelles

Herein we show that a new amphiphilic poly(vinyl alcohol)‐b‐poly(acrylonitrile) block copolymer dispersed in water can be easily loaded with gold nanoparticles by addition of chlorauric acid followed by reduction by sodium borohydride. After deposition of the so‐loaded micelles onto a silicon wafer, followed by an appropriate thermal treatment, the poly(acrylonitrile) core of the micelles is carbonized, while the poly(vinyl alcohol) shell is completely decomposed and volatilized, leading to gold encapsulated in carbon nanoparticles. The morphology of the micelles is maintained during thermal treatment without requiring shell‐cross‐linking of the micelles prior to pyrolysis.     

Observations on Solution Crystallization of Poly(vinyl alcohol) in the Presence of Single‐Wall Carbon Nanotubes

PVA/SWNT dispersions yield aloe plant‐like crystals, where the leaves are single crystals templated by PVA coated SWNT. Longer growth times (≈18 months) lead to hexagonal rod‐like crystals. HR‐TEM images show evidence that PVA molecules are aligned parallel to the SWNT axis. WAXD, electron diffraction, and HR‐TEM observations of these aloe plant and hexagonal crystals suggests evidence for possible PVA‐SWNT epitaxy. Wide‐angle and electron diffraction data of these crystals also show that the structure seems to mimic the 2D hexagonal crystal packing of SWNT. PVA lattice images and moiré fringes were also observed in the leaf‐like crystals.

     

Poly(vinyl alcohol)-based Amphiphilic Copolymer Aggregates as Drug Carrying Nanoparticles

A series of amphiphilic polyisobutylene-block-poly(vinyl alcohol) (PIB-b-PVA) copolymers of constant PIB and varying PVA block length was synthesized by living carbocationic polymerization and their solution behavior was studied. The synthesis involved the preparation of polyisobutylene-b-poly(tert.-butyl vinyl ether) followed by hydrolysis with hydrogen bromide. The copolymers were characterized by gel permeation chromatography, ¹H-NMR, and MALDI-TOF MS methods. The micellization behavior of the copolymers was investigated in aqueous media by direct dissolution and dialysis using static and dynamic light scattering. The critical micelle concentration, micelle size, aggregation number, and micelle shape were determined. The ability of the aggregates as drug carrying nanodevices was also investigated by doping them with indomethacin. UV-Vis measurements showed that the solubility of indomethacine increased significantly. Our findings suggest that the solubility is largely dependent upon the block segment ratios.     

Poly(vinyl alcohol)–Thioxanthone as One‐Component Type II Photoinitiator for Free Radical Polymerization in Organic and Aqueous Media

A novel one‐component type II polymeric photoinitiator, poly(vinyl alcohol)–thioxanthone (PVA–TX), is synthesized by a simple acetalization process and characterized. PVA–TX enables photopolymerization of methyl methacrylate and acrylamide in both organic and aqueous media. Photopolymerization proceeds even in the absence of a co‐initiator since PVA–TX possesses both chromophoric and hydrogen donating sites in the structure.

     

Grafting reactions of vinyl acetate onto poly[(vinyl alcohol)-co-(vinyl acetate)]

The grafting preference of vinyl acetate onto the methine carbon of poly(vinyl alcohol) (PVOH) versus the acetate group of poly(vinyl acetate) (PVAc) was determined as part of an attempt to prepare novel branched PVOH from partially hydrolyzed PVAc. The results showed long chain grafting on the acetate groups of the PVAc units rather than the methine carbons of the PVOH or PVAc units. Decreasing the monomer or initiator concentration decreased the molecular weight of the graft copolymer formed. Of the initiators studied, ammonium persulfate gave the largest increase in copolymer molecular weight. Both hydrolysis and reacetylation combined with gel permeation chromatography (GPC) and ¹³C-NMR of the fully hydrolyzed material were used to estimate the number and location of grafts. © 1996 John Wiley & Sons, Inc.     

Biomaterials of Poly(vinyl alcohol) and Natural Polymers

Polysaccharides and proteins are abundantly found in nature and are highly recommended for developing eco-friendly materials due to their special properties (biodegradability, biocompatibility, non-toxicity, low cost, etc.). However, they sometimes fail to meet specific requirements due to poor mechanical and physical properties. Poly(vinyl alcohol) (PVA) is one of the promising synthetic polymers with superior properties that can be blended with natural polymers for obtaining novel biomaterials with improved performances. This review addresses recent advance in PVA/polysaccharides and PVA/proteins biocomposites design and fabrication, mainly for the past two decades.     

Hydrophilic Films Based on Blends of Poly(acrylic acid) and Poly(2‐hydroxyethyl vinyl ether): Thermal,Mechanical, and Morphological Characterization

Hydrophilic films based on blends of poly(acrylic acid) and poly(2‐hydroxyethyl vinyl ether) were prepared by casting. The characterization of the films was performed by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), and scanning electron microscopy (SEM). It was shown that an increase of poly(2‐hydroxyethyl vinyl ether) content in the blends considerably decreases the glass transition temperature of the samples. The films containing 10 and 20 mol‐% of poly(2‐hydroxyethyl vinyl ether) show behavior of polymers in the glassy state, but a further increase of nonionic polymer content in the blend (30–50 mol‐%) provides the mechanical properties typical of a rubbery state. The content of water traces in the films has a significant effect on the mechanical properties of the materials.

Normalized DSC thermograms of PAA:PHEVE films. [PAA]:[PHEVE] = 90:10 (1), 80:20 (2), 70:30 (3), 60:40 (4), 50:50 mol‐% (5).     

Synthesis and Characterization of a Hydrophilic/Hydrophobic IPN Composed of Poly（vinyl alcohol） and Polystyrene

A hydrophilic/hydrophobic interpenetrating polymer network （IPN） of poly （vinyl alcohol） / polystyrene was prepared by conversion of the IPN of poly （vinyl acetate）/polystyrene. The hydrophilic/hydrophobic IPN was characterized by FT-IR and DSC, and the swelling ratios of the IPN in different solvents were measured.     

Photo‐Induced Solid‐State Crosslinking of Electrospun Poly(vinyl alcohol) Fibers

Summary: Poly(vinyl alcohol) (PVA) was derivatized by polymer analogous reaction with thienyl acryloyl chloride and processed to submicrometer fibers by electrospinning from aqueous solution. Water solubility of otherwise water‐soluble PVA fibers was reduced considerably by UV crosslinking of thienyl acrylate modified PVA fibers in the solid state. Water stability of these crosslinked fibers was proven by water steam test at 95 °C.

UV/Vis spectrum of PVA‐Thio fibers irradiated for different periods at 300 nm.     

Microwave‐Assisted Synthesis of Crosslinked Poly(vinyl alcohol) Nanocomposites Comprising Single‐Walled Carbon Nanotubes,Multi‐Walled Carbon Nanotubes,and Buckminsterfullerene

We report a facile method to accomplish the crosslinking reaction of PVA with SWNTs, MWNTs, and C‐60 using MW irradiation. Nanocomposites of PVA crosslinked with SWNT, MWNT and C‐60 were prepared expeditiously by reacting the respective carbon nanotubes with 3 wt.‐% PVA under MW irradiation, maintaining a temperature of 100 °C, representing a radical improvement over literature methods to prepare such crosslinked PVA composites. This general preparative procedure is versatile and provides a simple route to manufacture useful SWNT, MWNT and C‐60 nanocomposites.

     

Study of the Drying Behavior of Poly(vinyl alcohol) Aqueous Solution

This paper deals with the drying behavior of poly(vinyl alcohol) aqueous solution containing an active substance and placed into a Petri box. The objective is to reduce the drying time while respecting some constraints. To succeed, it is important to understand complex mechanisms governing heat and mass transfers. During the drying, the product thickness shrinks and its properties evolve. Drying kinetics in convective and infrared radiation are presented.     

Investigation of Miscibility of Linseed Oil Epoxy with Poly(vinyl alcohol)

Blending of two polymers in solution is a simple and cost effective technique to improve upon the physical and mechanical properties of the component polymers. Maximum synergism in the properties of the two polymers occurs when they are thermodynamically miscible. Poly(vinyl alcohol) (PVA) yields tough, flexible and water sensitive films. Linseed oil epoxy(LOE), a product from sustainable resource, used as a plasticizer and corrosion resistant coating, does not produce free standing film. A blend of PVA with LOE may yield films of good toughness and flexibility, and low water absorption if the two components are miscible with each other. Blends of PVA with LOE were prepared in weight ratios 80/20, 60/40, 40/60 and 20/80 through solution method by mixing in dimethyl sulphoxide. In the first instance, the miscibility the two components were investigated using the techniques of viscosity and ultrasonic measurements. The study revealed that the two components showed miscibility up to below 60 wt% PVA in the blend as at the composition LOE: PVA 40/60, phase inversion occurs. Above this composition, immiscibility is indicated; differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) delineates the above behavior in the solid phase.     

Liquid-state transitions (T>T g) of poly(vinyl alcohol)

The two liquid state transitions,T _ll andT _ll, of non-crystalline, uncrosslinked poly(vinyl alcohol) were determined by differential scanning calorimetry.T _ll increased as the molecular weightM _n increased, whileT _ll remained almost constant. Crosslinking and crystallinity lead to disappearance of the transitionT _ll. The transitionT _ll was linked to mobility of whole chains, whereasT _ll was characteristic of segmental mobility.     

Solid‐state 13C and 129Xe NMR study of poly(vinyl alcohol) and poly(vinyl alcohol)/lactosilated chitosan gels

Dry and hydrated poly(vinyl alcohol) (PVA) gels with 55% (a‐PVA) and 61% (s‐PVA) syndiotacticity and related PVA/lactyl chitosan (LC) blends have been investigated with ¹²⁹Xe and cross‐polarization/magic‐angle‐spinning ¹³C NMR techniques. Although the dry gels exhibit two broad ¹²⁹Xe resonances in the slow‐to‐intermediate exchange limit, both hydrated gels show three resonances. The corresponding dry blends exhibit two signals, the chemical shifts and line widths of which change with respect to those of pure PVA, whereas one (a‐PVA/LC) or two (s‐PVA/LC) signals appear in the spectra of the hydrated blends. A comparative analysis of the data demonstrates that LC rearranges the domains of the polymeric matrix in both the dry and hydrated blends according to the syndiotacticity of the PVA chains. Information on the molecular motions of the amorphous and swollen polymeric domains in the kilohertz range has been obtained from an analysis of the spin‐lattice relaxation times. These data indicate that the dynamics and arrangement of the PVA chains in the gels are strongly affected by their tacticity and the addition of the copolymer LC. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3123–3131, 2003     

PVB存在下PVC化学法脱氯化氢的研究

ＰＶＢ存在下ＰＶＣ化学法脱氯化氢的研究刘恒＊李大成陈朝珍（四川联合大学化工学院成都６１００６５）关键词聚氯乙烯，脱氯化氢，聚乙烯醇缩丁醛１９９６－０９－０８收稿，１９９７－０５－２６修回国家教育委员会留学归国人员资助费资助课题近年来在ＰＶＣ脱氯化氢制...     

Radiation effects on the thermal degradation of poly(vinyl chloride) and poly(vinyl alcohol)

Radiation effects on the formation of conjugated double bonds in the thermal degradation of poly(vinyl chloride) (PVC) and poly(vinyl alcohol) (PVA) were investigated. Thin films of PVC and PVA were either irradiated with γ-rays at ambient temperature (pre-irradiation) and then subjected to thermal treatment, or irradiated at elevated temperatures (in situ irradiation). An extensive enhancement of the thermal degradation was observed for the pre-irradiation of the PVC films, which was more effective than the effect of the in situ irradiation at the same absorption dose. For the PVA degradation, however, the effect of the in situ irradiation was larger than that of the pre-irradiation. The results were explained and related mechanisms were discussed based on radiation-induced chemical reactions and their individual contributions to the thermal degradation behaviors of the two polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3089–3095, 1998     

Novel Silver/Poly(vinyl alcohol) Nanocomposites for Surface‐Enhanced Raman Scattering‐Active Substrates

Summary: Surface‐enhanced Raman scattering (SERS)‐active substrates with high enhancement were prepared by an in situ reduction method. Novel silver/poly(vinyl alcohol) (PVA) nanocomposite films were obtained, in which the silver nitrate, poly(γ‐glutamic acid) (PGA), and PVA acted as precursor, stabilizer, and polyol reducant, respectively. The UV‐visible spectra of the as‐fabricated films showed that the surface plasmon resonance (SPR) absorption band was narrow and of a stronger intensity, which indicates that the Ag nanoparticle size distribution on the substrate was highly uniform. This finding was further confirmed by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and field‐emission scanning electron microscope (FE‐SEM) measurements. It was found that a PGA‐stabilized PVA nanocomposite film revealed the presence of well‐dispersed spherical silver nanoparticles with an average diameter of 90 nm. The new substrate presents high SERS enhancement and the enhanced factor is estimated to be 10⁶ for the detection of benzoic acid.

The Raman scattering enhancement factor for the Raman spectra of benzoic acid on the various nanocomposite films.     

超声-tio2光催化协同降解聚乙烯醇

聚乙烯醇;超声光催化;纳米锐钛矿型tio2     

Preparation and Characterization of Interpenetrating Polymer Hydrogels Based on Poly(acrylic acid) and Poly(vinyl alcohol)

Interpenetrating polymer hydrogels (IPHs) of Poly (vinyl alcohol) (PVA) and Poly (acrylic acid) (PAAc) have been prepared by a sequential method: crosslinked PAAc chains were formed in aqueous solution by crosslinking copolymerization of acrylic acid and N, N′-methylenebisacrylamide in the presence of PVA. The application of freezing-thawing cycles (F-T cycles) leads to the formation of a PVA hydrogel within the synthesized PAAc hydrogel. The swelling and the viscoelastic properties of the prepared IPHs were evaluated on the basis of the structural features obtained from solid state ¹³C-NMR spectroscopy.     

Synthesis of water‐soluble single‐walled carbon nanotubes and its application in poly(vinyl alcohol) composites

A new type of water‐soluble single‐walled carbon nanotubes (SWNTs) was synthesized by grafting of dodecyl quaternary ammonium bromides. Results of Fourier transform infrared and proton nuclear magnetic resonance spectroscopic analyses confirmed the successful synthesis. Water‐soluble performance of functionalized SWNTs, i.e. N⁺‐SWNTs, has been studied in terms of solubility and stability. It was found that the solubility could reach up to 110 mg.l^?1 and as‐prepared solution possesses a good stability over the PH range of 6.87–11.25. Based on these properties, one of the important applications of N⁺‐SWNTs was demonstrated to prepare poly(vinyl alcohol) (PVA) composites. Owing to critical issues of uniform dispersion and enhanced interfacial PVA‐nanotube interaction having been simultaneously resolved to a reasonable extent, the composite film with only 0.3 wt% N⁺‐SWNTs showed an increase of 33% and 32% in tensile strength and Young's modulus, respectively, over neat PVA film. Moreover, a high optical quality and slightly increased glass transition temperature were also observed. Copyright © 2012 John Wiley & Sons, Ltd.