Summary: Novel alternating polyketone‐based polymers bearing pendant saccharide units that are accessible by polymerization catalysis are presented. The materials were synthesized by polymerization of carbon monoxide and α‐olefins containing protected glucose or N‐acetyl glucosamine residues. The dicationic PdII bis(phoshine) complex [Pd(dppp)(NCCH3)2](BF4)2 was used as a catalyst precursor. An O‐deacetylation of the copolymers afforded materials with amphiphilic character.
Structure of the poly(1,4‐ketone) copolymers synthesized here. 相似文献
Novel conjugated carbazole polymers based on the alkyne‐linked 1,8‐carbazole structure are synthesized in high yield by the Sonogashira cross‐coupling reaction and acetylenic oxidative coupling reaction. The polymers are thermally stable and highly soluble in common organic solvents such as CHCl3, CH2Cl2, and THF. As compared to ethynylene‐linked polymer, the butadiynylene‐linked polymer display a bathochromic shift in the absorption maximum and end absorption position. In addition, the fluorescence behaviors in CH2Cl2 are almost identical for both polymers. Electrochemical measurements indicate that the ethynylene‐linked polymer possesses a lower first oxidation potential than the butadiynylene‐linked one.
POSS‐functionalized polyisobutylenes (PIBs) were synthesized by carbocationic polymerization using an epoxy‐POSS/TiCl4 initiating system in hexane/methyl chloride (60:40 v/v) solvent mixture at −80 °C. 1H NMR spectroscopy verified the incorporation of one epoxy‐POSS per polymer chain. Light scattering and TEM analysis demonstrated the formation of 50–100 nm sized aggregates and micron‐sized clusters.
Several alkyl side chains are bonded to each polymeric repeat unit using both coordinated ligands and electrostatically bound counterions to directly control the interface curvature of the self‐organized structures. 2,6‐Bis(octylaminomethyl)pyridine is Zn‐coordinated to poly(4‐vinylpyridine) (P4VP) with dodecylbenzenesulfonate (DBS) counterions, leading to multicomb polymeric supramolecules, poly[(4VP)Zn(2,6‐bis(octylaminomethyl)pyridine)(DBS)2]. Coordination is evidenced by infrared spectroscopy and visualized by quantum chemical calculations. The amorphous hexagonal self‐organized structures are characterized using X‐ray measurements.
The Lewis acid B(C6F5)3 in combination with hydrosilanes exhibits remarkable activity in the oligomerization of sulfone‐ and phosphonate‐based monomers. This process opens new routes to high‐tech silicone‐based materials, i.e., thermoplastic elastomers and heat‐resistant polysiloxanes.
Wet chemical synthesis of silver cables wrapped with polypyrrole is reported in aqueous media without use of any surfactant/capping agent and/or template. The method employs direct polymerization of pyrrole in an aqueous solution with AgNO3 as an oxidizing agent. The four probe conductivity results for the as‐synthesized silver nanocables of polypyrrole films were found to be 3, 5, 5, and 9 S · cm−1 for a 1: 2, 1: 1, 1: 0.5, and 1: 0.1 silver‐to‐pyrrole ratio, respectively. This approach can be extended to other monomers such as aniline and N‐methylaniline (NMA) to prepare different morphologies of silver nanostructures. Aniline monomer polymerization occurred at room temperature to produce a coating of a silver mirror on the side walls of the glass vial, as in the case of Tollen's process of making silver mirrors. The silver mirror coating strategy was extended to a poly(ethylene terephthalate) (PET) surface and the resistivity of the polyaniline‐coated Ag nanocomposites were measured and found to be semiconducting.
The synthesis and characterization of a soluble high molecular weight copolymer based on 4,8‐bis(1‐pentylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene and 2,1,3‐benzoxadiazole is presented. High efficiency organic photovoltaic (OPV) devices comprised of this polymer and phenyl‐C71‐butyric acid methyl ester (PC71BM) were fabricated by additive processing with 1‐chloronapthalene (CN). When the active layer is cast from pristine chlorobenzene (CB), power conversion efficiencies (PCEs) average 1.41%. Our best condition—using 2% chloronapthalene as a solvent additive in CB—results in an average PCE of 5.65%, with a champion efficiency of 6.05%.
A Y‐shaped amphiphilic fluorinated monomer, 1‐(1H,1H,2H,2H‐perfluorodecyloxy)‐3‐(3,6,9‐trioxadecyloxy)‐propan‐2‐yl acrylate has been synthesized and its polymerization by reversible addition–fragmentation chain transfer (RAFT) homopolymerization has been investigated. The results show that the molecular weights of the polymers are controlled and all the molecular weight distributions are lower than 1.4. Well‐defined copolymers with 2‐(N,N‐dimethylamino)ethyl methacrylate have been prepared by RAFT polymerization, and the surface properties of the block and random copolymers have been examined by contact angle measurement for water and hexadecane. It has been found that the surfaces of the block copolymers simultaneously exhibit excellent anti‐fog and oil‐repellent properties.
We report the synthesis of a series of block copolymers consisting of a rod‐like semiconducting poly(2,5‐di(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene) (DEH‐PPV) block and a flexible poly(lactic acid) (PLA) block that can be selectively degraded under mild conditions. Such selectively degradable block copolymers are designed as self‐assembling templates for bulk heterojunction donor–acceptor layers in organic solar cells. A lamellar microphase‐separated domain structure was identified for block copolymers with PLA volume fractions between 29 and 79% in bulk and thin films using SAXS, TEM, and AFM. Depending on the ratio of the two blocks we find either lamellae oriented parallel or perpendicular to the substrate in thin films.
Summary: Thermosensitive association of a diblock copolymer consisting of poly(3‐dimethyl(methacryloyloxyethyl) ammonium propane sulfonate) (PdMMAEAPS), as an upper critical solution temperature (UCST) block, and poly(N,N‐diethylacrylamide) (PdEA), as a lower critical solution temperature (LCST) block, has been investigated by using IR spectroscopy. The ν(CO) and ν(SO) bands of the PdMMAEAPS block and the amide I band of PdEA block critically changed at the UCST and LCST, respectively, indicating that the segmental interaction of each block is altered at each transition.
The double temperature responsiveness of a UCST block and LCST block containing diblock copolymer. Micelles form at temperatures both below the UCST and above the LCST of the blocks. 相似文献
Tough networks are prepared by photo‐crosslinking high‐molecular‐weight DLLA and TMC macromers. These amorphous networks exhibit tunable thermal and mechanical properties and have excellent shape‐memory features. Variation of the monomer ratio allows adjustment of Tg between approximately ?13 and +51 °C. The elastic moduli at room temperature can be varied between 4.5 and 2730 MPa. The crosslinks allow the networks to return to their original shape after deformation. 60:40 DLLA:TMC networks have Tg values between room temperature and body temperature, with mechanical properties at body temperature close to soft tissues. Several medical devices are prepared from these networks.
The synthesis of water soluble star‐block copolypeptides and their encapsulation properties are described. The star‐block copolypeptides, obtained by ring‐opening polymerization of amino acid N‐carboxyanhydrides, consist of a PEI core, a hydrophobic polyphenylalanine or polyleucine inner shell, and a negatively charged polyglutamate outer shell. The encapsulation study showed that these water soluble, amphiphilic star‐block copolypeptides could simultaneously encapsulate versatile compounds ranging from hydrophobic to anionic and cationic hydrophilic guest molecules.
A new chromophore, C1 , based on a similar DπA‐structure as in the FTC ‐chromophore but with a hydroxyalkyl spacer perpendicular to the direction of the dipole moment was synthesized. Both chromophores and the CLD ‐chromophore were used to prepare high Tg nonlinear optical vinyl polymers. The influence of the position of the spacer on the DπA‐system on the NLO response of the resulting polymers was investigated.
Poly(amidoamine)s with amino pendant groups were prepared by hydrogen‐transfer polyaddition of primary and secondary amines to bis‐acrylamines. Dansyl cadaverine (DC) doxorubicin (Dox) were bound to the polymers via a cis‐aconityl spacer to give conjugates containing 3 µg of DC per mg of polymer and 28 to 35 µg of Dox per mg of polymer. Release of DC and Dox at physiological and acidic pH varied from 0 to 35% over 48 h and was pH dependent. Although the ISA1Dox conjugate (IC50 = 6 µg Dox · mL?1) presented similar toxicity as the parent polymer without Dox, ISA23Dox showed increased toxicity (IC50 = 10 µg Dox · mL?1). These results suggest that ISA23Dox is able to release biologically active Dox in vitro and that this conjugate might be suitable for further development.
Attachment of triarylamino‐functional groups at the 9‐position of 2,7‐linked carbazole polymers results in blue‐emitting materials with two independent redox processes that were attributed to the triarylamino groups and the polymer backbone, respectively. This new class of blue‐emitting conjugated polymers was prepared via a Suzuki cross‐coupling reaction and showed low turn‐on voltages in electroluminescent devices as a result of their low ionisation potentials. The photophysical, electrochemical and electroluminescent properties of these materials are discussed.
In step‐growth polymerizations, the molar concentration of reactive linear species (oligomers and polymers) decreases with higher conversions and finally reaches zero at 100% conversion. This self‐dilution favors cyclization at the expense of chain‐growth. Cyclization reduces the average lengths of the linear species, and thus, induces a kind of “self‐acceleration”. Both effects together overcompensate the decreasing cyclization tendency resulting from increasing chain lengths. This influence of the self‐dilution is also operating in the case of “abn” monomers, so that at 100% conversion (defined for the “a” functional groups) all hyperbranched polymers will have a cyclic core. With modifications, the “law of self‐dilution” also applies to “a2 + b3” or “a2 + b4” polycondensations. Furthermore, the “law of self‐dilution” is valid for both kinetically‐ and thermodynamically‐controlled polycondensations.
Summary: A diblock copolymer brush consisting of poly(methyl acrylate)‐block‐poly(pentafluoropropyl acrylate) (Si/SiO2//PMA‐b‐PPFA) was synthesized on a porous silica substrate. The brush was exposed to selective solvents, as well as thermal treatments, to induce a surface rearrangement. The rearrangement resulted in the selective loss or creation of an ultrahydrophobic layer by location of the fluoropolymer segment. This work demonstrates that surface rearrangements observed on flat surfaces can be transferred to porous substrates.
Image of a water droplet in contact with an Si/SiO2//PMA‐b‐PPFA ultrahydrophobic polymer brush, synthesized from a porous silica substrate. 相似文献
Photolabile polymer brushes with tailored length containing a photoremovable protecting group (NVOC) are prepared via the SI‐ATRP method. Upon light irradiation, the NVOC group is removed to generate controlled densities of free amine groups (PAMA) randomly distributed along the brush. The presence of the ionizable groups induces a photo‐triggered swelling response. The swelling degree can be tuned by the irradiation dose. A dual (light and pH), tunable response is demonstrated.
1‐Vinyl‐2‐(hydroxymethyl)imidazole ( 2 ) is synthesized by a procedure described in the literature. Corresponding copolymers with upper critical solution temperature (UCST)‐type transitions in water and high‐glass transition temperatures (Tg) are prepared by free radical copolymerization with N‐vinylimidazole ( 1 ). Depending on the copolymer composition, the cloud point can be varied between 19 and 41 °C. As the copolymer composition is identical with the monomer feed ratio, the cloud point can be easily tuned in the desired range. Furthermore, a distinctive pH‐dependence and salt effect can be observed.
PANI nanofibers are prepared electrochemically by template‐free method on a stainless steel electrode. Both the hydrophilicity and the lipophilicity of the modified SS surface are enhanced by the nanostructured PANI, and a super‐amphiphilic surface is obtained in this way. The influence of polymerization conditions, such as polymerization potentials, polymerization time, the acidity, and the dopants on the super‐amphiphilic property, has been systematically investigated. In addition, the mechanisms of obtaining a super‐amphiphilic surface are briefly discussed.
