Encapsulation of Bovine Serum Albumin in Temperature‐Programmed “Shell‐in‐Shell” Structures

A novel approach to load a hydrophilic bovine serum albumin into drug carriers was proposed in terms of temperature‐programmed “shell‐in‐shell” structures, which were fabricated with poly(N‐isopropylacrylamide), poly(lactide), poly(ethylene glycol), and Au nanoparticles. Spherically well‐defined “shell‐in‐shell” structures were constructed by a modified‐double‐emulsion method (MDEM). The lower critical solubility temperature of the structures was manipulated to 36.4 °C which was confirmed by UV/Vis spectroscopy and DSC (Differential Scanning Calorimetry).

TEM image of the Au@PLLA‐PEG@PNIPAAm‐PDLA structure.     

On the Crystal Structure of Isotactic cis‐1,4‐Poly(1,3‐pentadiene)

Summary: A comparison between the crystal structure of isotactic cis‐1,4‐poly(1,3‐pentadiene) previously predicted by molecular mechanics calculations and that successively determined by other authors by experimental data is reported. The agreement between the two structures is very good as far as the space group, the unit cell parameters and the conformation of the polymer chain are concerned. The mode of packing of the chains proposed in the experimental crystal structure is very similar to that found as relative minimum in the previous energy calculations. The coexistence, in different amounts, of these two modes of packing is suggested by the analysis of the simulated X‐ray spectra and by the results of new energy calculations.

A mode of packing of chains of isotactic cis‐1,4‐poly(1,3‐pentadiene).     

Direct Observation of Alkyl Chain Interdigitation in Conjugated Polyquarterthiophene Self‐Organized on Graphite Surfaces

A solution processible polymer—poly(3,3‴‐didodecylquaterthiophene) (PQT‐12) is investigated at the liquid/solid interface using the scanning tunneling microscopy (STM). Two‐dimensional ordered films made up of self‐assembled domains, with dimensions of 100 nm × 50 nm adsorbed on highly oriented pyrolytic graphite (HOPG) were formed. These domains consist of parallel lamellar polymer chains, with the alkyl chains forming interdigitated structures, along with U‐shaped and closed ring segments of the polymer chains. A polymer chain packing model is proposed herein, which attempts to propose a correlation between the packing of long chains and charge mobilities. These STM results could help in understanding the relationship between the extended conjugation and molecular organization of the PQT‐12 chains.

     

Sub‐Micrometer Sized Hairy Latex Particles Synthesized by Dispersion Polymerization Using Hydrophilic Macromolecular RAFT Agents

Dispersion polymerization of n‐butyl acrylate has been performed in a mixture of ethanol and water in the presence of poly(N‐acryloylmorpholine) (polyNAM). These hydrophilic polymer chains are synthesized by the RAFT process and thus incorporate well‐defined chain ends. The dithioester ω‐end group is used as an efficient chain transfer agent under dispersion polymerization conditions to produce hairy poly(n‐butyl acrylate) latex particles. Moreover, pre‐functionalization of the polyNAM chains on the α‐end by a carbohydrate derivative is also achieved to obtain directly functionalized particles according to the same strategy.

     

Novel Water‐Soluble Shape‐Regulatable Luminescent Nanoparticles by Non‐Covalently Bonded Self‐Assembly

Summary: Novel non‐covalently connected water‐soluble nanoparticles that contain poly(fluorene‐co‐phenylene) with hydroxy‐capped alkoxy side chains (PF3BOH) and poly(acrylic acid) (PAA) have been obtained and characterized. With different proportions of PF3BOH and PAA, the shape and size of the nanoparticles can be regulated. The nanoparticles are quite stable in water with no precipitate being observed after weeks. Transmission electron microscopy and dynamic laser light scattering are used to confirm the morphology of the PF3BOH/PAA nanoparticles. Their optical properties have been investigated and show similar optoelectronic properties to a PF3BOH solid film although they do not undergo aggregation.

TEM images of the nanoparticles obtained upon varying the PAA/PF3BOH content.     

Sphere‐to‐Rod Transition of Micelles formed by the Semicrystalline Polybutadiene‐block‐Poly(ethylene oxide) Block Copolymer in a Selective Solvent

We present a morphological study of the micellization of an asymmetric semicrystalline block copolymer, poly(butadiene)‐block‐poly(ethylene oxide), in the selective solvent n‐heptane. The molecular weights of the poly(butadiene) (PB) and poly(ethylene oxide) (PEO) blocks are 26 and 3.5 kg · mol⁻¹, respectively. In this solvent, micellization into a liquid PEO‐core and a corona of PB‐chains takes place at room temperature. Through a thermally controlled crystallization of the PEO core at −30 °C, spherical micelles with a crystalline PEO core and a PB corona are obtained. However, crystallization at much lower temperatures (−196 °C; liquid nitrogen) leads to the transition from spherical to rod‐like micelles. With time these rod‐like micelles aggregate and form long needles. Concomitantly, the degree of crystallinity of the PEO‐cores of the rod‐like micelles increases. The transition from a spherical to a rod‐like morphology can be explained by a decrease of solvent power of the solvent n‐heptane for the PB‐corona chains: n‐Heptane becomes a poor solvent at very low temperatures leading to a shrinking of the coronar chains. This favors the transition from spheres to a morphology with a smaller mean curvature, that is, to a cylindrical morphology.

     

Multicomb Polymeric Supramolecules and Their Self‐Organization: Combination of Coordination and Ionic Interactions

Several alkyl side chains are bonded to each polymeric repeat unit using both coordinated ligands and electrostatically bound counterions to directly control the interface curvature of the self‐organized structures. 2,6‐Bis(octylaminomethyl)pyridine is Zn‐coordinated to poly(4‐vinylpyridine) (P4VP) with dodecylbenzenesulfonate (DBS) counterions, leading to multicomb polymeric supramolecules, poly[(4VP)Zn(2,6‐bis(octylaminomethyl)pyridine)(DBS)₂]. Coordination is evidenced by infrared spectroscopy and visualized by quantum chemical calculations. The amorphous hexagonal self‐organized structures are characterized using X‐ray measurements.

     

Rapid UV Light‐Triggered Macromolecular Click Conjugations via the Use of o‐Quinodimethanes

Shining a light on click chemistry: The use of UV‐radiation as trigger signal provides a facile means to obtain spatial and temporal control over polymer conjugation reactions in addition to providing a further means of achieving orthogonality in click transformations. In the current contribution, UV‐radiation was employed to induce a highly efficient Diels–Alder conjugation of polymeric building blocks via the photo‐induced in situ formation of highly reactive cis‐dienes from a 2‐methylbenzophenone precursor.

     

Di‐Channel Polyfluorene Containing Spiro‐Bridged Oxadiazole Branches

Summary: A p–n di‐channel copolymer based on polyfluorene (PF) has been designed and prepared. Branches containing oxadiazole units are attached to the PF backbone through the spiro‐structure and act as channels to improve the electron affinity; these branches form a steric ‘di‐channel’ framework with the polymer backbone. The polymer possesses excellent thermal stability. The lowest unoccupied molecular orbital energy level of the polymer is significantly altered in comparison with poly(9,9‐dioctylfluorene‐2,7‐diyl).

Schematic of the di‐channel polyfluorene synthesized here and the mechanism of energy transfer through the structure.     

Synthesis and Self‐Assembly of Amphiphilic Diblock Copolymers using a Fluorescently Labeled N‐Alkoxyamine Initiator

Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.

     

Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

Preparation of Clickable Poly(3‐hydroxyalkanoate) (PHA): Application to Poly(ethylene glycol) (PEG) Graft Copolymers Synthesis

A new synthesis of amphiphilic biodegradable copolymers consisting of hydrophobic poly(3‐hydroxyalkanoate) (PHA) backbone and hydrophilic poly(ethylene glycol) (PEG) units as side chains is described. Poly[(3‐hydroxyoctanoate)‐co‐(3‐hydroxyundecenoate)] (PHOU) was first methanolyzed and its unsaturated side chains were quantitatively oxidized to carboxylic acid. Esterification with propargyl alcohol led to an alkyne‐containing “clickable” PHA in 71% conversion. Its reactivity was successfully demonstrated by grafting azide‐terminated PEG chains of 550 and 5 000 g · mol⁻¹, respectively. All products were fully characterized using GPC, ¹H, and COSY NMR.

     

Computer‐Aided Optimization of Conditions for Fast and Controlled ICAR ATRP of n‐Butyl Acrylate

The potential of initiators for continuous activator regeneration atom transfer radical polymerization (ICAR ATRP) for the synthesis of well‐defined poly(n‐butyl acrylate) is analyzed by means of simulations. The kinetic model accounts for reactivity differences between secondary and tertiary macrospecies and considers the possible influence of diffusional limitations. CuBr₂ is used as transition metal salt and the commercially available N,N,N′,N″,N″‐pentamethyldiethylenetriamine as ligand. For targeted chain lengths (TCLs) up to 1000, the ICAR ATRP can be performed relatively quickly, and with ppm levels of ATRP catalyst. For moderate TCLs, slightly higher ppm levels are required if excellent control over chain length is also desired. In all cases, limited loss of end‐group functionality (EGF) results.

     

Solvent Vapor‐Induced Nanowire Formation in Poly(3‐hexylthiophene) Thin Films

Summary: Nanowire lengths and length‐to‐width aspect ratios in regioregular poly(3‐hexylthiophene) (P3HT) were simply controlled through changes in the solvent vapor pressure during solidification. It is demonstrated that the nanowires grew by rod‐to‐rod association, in which the molecular long axis of the P3HT chains appeared to be well‐oriented parallel to the silicon substrate (Si/SiO_x). The formation of the nanowires took place by one dimensional self‐assembly, governed by π‐π stacking of the P3HT units.

TEM high contrast images showing P3HT nanowires fabricated by spin‐coating under a solvent vapor pressure.     

Tunable Smart Surface of Gold Nanoparticles Achieved by Light‐Controlled Molecular Recognition Effection

Thermosensitive poly(N‐isopropylacrylamide) (PNIPAm)‐coated gold nanoparticles (AuNPs) were prepared by self‐assembly of the azobenzene‐terminated PNIPAm on the surface of the α‐cyclodextrin (α‐CD)‐capped AuNPs via the host–guest molecular recognition between α‐CD and azobenzene. Reversible attachment–detachment of azobenzene‐terminated PNIPAm on the surface of α‐CD‐capped AuNPs was achieved when subjected to visible and UV light irradiation alternately, which endowed thermosensitive AuNPs with tunable smart properties.

     

Studies of Adjacent Re‐Entry Folds of Chains of Syndiotactic l,2‐Poly(1,3‐butadiene) by Molecular Mechanics Calculations

The mode of packing and the adjacent re‐entry folds of chains of syndiotactic 1,2‐poly(1,3‐butadiene) have been studied by molecular mechanics calculations with the use of various sets of potential functions. The results of the packing analysis indicate that the crystal grows preferentially along the [100] and [110] directions. Models of fold have been built up on an infinite ab surface completely covered by adjacent re‐entry folds in the (100) and (110) planes. The results of energy minimizations show that several almost isoenergetic folds, constituted by four monomeric units, can be realized in the (100) planes, while the fold in the (110) planes has higher energy. The calculated value of the work of fold is in satisfactory agreement with that derived by crystallization kinetics reported in literature.

     

Collapse of Cylindrical Brushes with 2‐Isopropyloxazoline Side Chains Close to the Phase Boundary

A high‐molar‐mass cylindrical brush polymer with a main chain degree of polymerization of P_w = 1047 is synthesized by free‐radical polymerization of a poly‐2‐isopropyloxazoline macromonomer with P_n = 28. The polymerization is conducted above the lower phase transition temperature of the macromonomer, i.e., in the phase‐separated regime, which provides a sufficiently concentrated macromonomer phase mandatory to obtain high‐molar‐mass cylindrical brushes. Upon heating to the phase transition temperature, the hydrodynamic radius is observed to shrink from 34 to 27 nm. Further increase in temperature resulted in aggregated chains which were observed to coexist with single chains until eventually only aggregates of μm size were detectable.

     

Formation of Silica/Poly(p‐dioxanone) Microspheres by Surface‐Initiated Polymerization

A polymeric film of a biodegradable poly(p‐dioxanone) was grown from 490 nm silica particles by monolayer formation via self‐assembly of hydroxy‐terminated triethoxysilane and subsequent surface‐initiated ring‐opening polymerization of p‐dioxanone. The resulting silica/poly(p‐dioxanone) hybrid particles were characterized by means of ¹H NMR spectroscopy, IR spectroscopy, thermogravimetric analysis, field‐emission scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy.

     

Synthesis,Optical, and Electrochemical Properties of the High‐Molecular‐Weight Conjugated Polycarbazoles

Summary: A kind of novel dibromocarbazole monomer bearing three alkyl chains was prepared. Two strategies were developed to improve the solubility and molecular weight of carbazole polymers. One was the polymerization of N‐octyl‐2,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)carbazole with the alkylated dibromocarbazole. Another one was the polymerization of N‐octyl‐2,7‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)carbazole with N‐octyl‐3,6‐dibromocarbazole. All the polymerizations were carried out under palladium‐catalyzed Suzuki polycondensation (SPC) conditions. Through using carbazole monomer bearing three alkyl chains to polymerize, we have successfully boosted the number‐average molecular weight of 2,7‐linked carbazole polymers from not more than 5 to 67 kDa. The high‐molecular‐weight polymers were obtained in high yields and displayed good solubility in common organic solvents. Their optical, electrochemical, and thermal properties were also reported.

Preparation of carbazole polymers by Suzuki polycondensation.     

Polyglycidol Based Amphiphilic Double‐Comb Copolymers and Their Self‐Association in Aqueous Solution

Herein, we report synthesis and self‐association properties of amphiphilic double‐comb polymers with polyglycidol backbones. First, a bifunctional polyglycidol precursor is synthesized via monomer activated anionic polymerization. Next, two efficient and orthogonal polymer analogous reactions are carried out for grafting hydrophilic oligoethylene glycol side chains and hydrophobic linear aliphatic side‐chains. The polymers are analyzed by means of NMR, GPC, and DSC. From the DSC analysis of the bulk samples it is evident that aliphatic side chains segregate from the polar backbone and thus crystallize. Furthermore, in aqueous media the double‐comb polymers spontaneously self‐assemble to form a multilayer structure. The present results pave a way to tailor and design amphiphilic polymers based on glycidols. Major advantages are spontaneous self‐assembly in water and the possibility to form onion polymersomes relevant to encapsulation.