Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Catalytic Polymerizations of Hydrophobic,Substituted, Acetylene Monomers in an Aqueous Medium by Using a Monomer/Hydroxypropyl‐β‐cyclodextrin Inclusion Complex

Ten hydrophobic, substituted, acetylene monomers were examined as to their abilities to form an inclusion complex with hydroxypropyl‐β‐cyclodextrin (HPCD). Only the monomers with suitable substitutents were found to form the monomer/HPCD complex, which was identified by NMR, FTIR, and UV‐vis spectroscopy. Polymerizations of the monomers were successfully carried out in aqueous solution by using the prepared monomer/HPCD inclusion complex and by using a water‐soluble Rh‐based catalyst, [Rh(cod)₂BF₄] or [Rh(nbd)(H₂O)OTs]. Such polymerizations provided high‐yield (>90%) polymers with a cis content of approximately 100%. The as‐prepared polymers could take an ordered helical conformation, just like their counterparts obtained in organic solvents.

     

A New Class of Blue‐Emitting Materials for LED Applications: Triarylamine N‐Functionalised 2,7‐Linked Carbazole Polymers

Attachment of triarylamino‐functional groups at the 9‐position of 2,7‐linked carbazole polymers results in blue‐emitting materials with two independent redox processes that were attributed to the triarylamino groups and the polymer backbone, respectively. This new class of blue‐emitting conjugated polymers was prepared via a Suzuki cross‐coupling reaction and showed low turn‐on voltages in electroluminescent devices as a result of their low ionisation potentials. The photophysical, electrochemical and electroluminescent properties of these materials are discussed.

     

Molecularly Imprinted Multi‐Layer Core‐Shell Nanoparticles – A Surface Grafting Approach

Surface initiated living‐radical polymerization (SIP) based on dithiocarbamate iniferters has been used to create molecularly imprinted core‐shell (CS) nanoparticles. Using this approach, propranolol, morphine and naproxen have been successfully imprinted in particle shells (the latter could not be imprinted using conventional aqueous‐based CS methods). Rebinding properties of the imprinted particles appear to be similar to those made by alternative methods. The living radical initiation mechanism makes it possible to build complex multi‐layer particles sequentially. As a demonstration, multi‐layer propranolol‐imprinted particles were generated. Two additional functional shells were grown over the imprinted shell, while the propranolol binding was retained, albeit at a reduced level.

     

Dual Self‐Assembling Polycondensation of p‐Acetoxybenzoic Acid and p‐Acetamidobenzoic Acid

The dual self‐assembling polycondensation of p‐acetoxybenzoic acid (ABA) and p‐acetamidobenzoic acid in Therm S 800 was examined at 300 °C. Needle‐like crystals and lath‐like crystals were formed simultaneously through reaction‐induced crystallization of oligomers at a molar ratio of 30–50 mol‐% ABA in the feed. The needle‐like crystals comprised more p‐oxybenzoyl units, whereas the lath‐like ones contained higher amounts of p‐benzamide moieties.

     

Raspberry‐Like Aggregates Containing Secondary Nanospheres of Polystyrene‐block‐poly(4‐vinylpyridine) Micelles

Summary: Raspberry‐like aggregates containing secondary nanospheres were studied. The formation of raspberry‐like aggregates was due to complexation between core‐shell microspheres and core‐corona micelles. The core‐shell microspheres were synthesized with soap‐free polymerization of styrene and methyl acrylic acid, which included carboxyl groups in the periphery. The micelles were self‐assembled by polystyrene‐block‐poly(4‐vinylpyridine), which contained pyridine groups in the corona. The driven force to form raspberry‐like aggregates was due to the affinity between the carboxyl and pyridine groups. The morphology of the raspberry‐like aggregates could be tuned by changing the ratio of the microspheres to micelles. IR measurements suggested that the raspberry‐like aggregates were like zwitterions.

TEM image of the raspberry‐like aggregates formed at a molar ratio of MAA to 4VP at 1:4.     

Electronic Structure and Doping Behavior of PANI‐NSA Nanofibers Investigated by Resonance Raman Spectroscopy

Summary: Polyaniline nanofibers (from 93 to 220 nm) doped with β‐naphtalenesulfonic acid (PANI‐NSA) have been characterized. Nonhomogeneity in the thickness of fibers, as can be seen with scanning electron microscopy, is the reason for their instability under the HCl doping process. Resonance Raman spectral profiles of PANI‐NSA fibers suggest a lower protonation state than the emeraldine salt forms. Observation of Raman bands, which are a result of cross‐linking, confirms that one of the properties of the polymeric structure formed in micellar polymerization is the type of connection between chains.

     

Gel Formation during the Gilch Synthesis of Poly(p‐phenylene vinylenes): Evidence of an Unexpected Explanation

Gelation of the reaction mixture and insolubility of the poly(p‐phenylene vinylenes) (PPVs) when isolated at this stage, but complete redissolution of the gel and excellent solubility of the resulting PPVs after further stirring for hours or days, is a phenomenon in Gilch polymerizations that has not been explained so far. It is verified that, in agreement with the literature, specific additives prevent gelation. However, it is also shown that chemical crosslinking is certainly not the reason for gel formation. Instead, it seems to be the consequence of a very high entanglement density in the pristine PPVs, which requires time for relaxation. The mentioned additives seem to support this dis‐entanglement process.

     

Nano Grape Formation by isotactic‐Poly(methacrylic acid)‐block‐Poly(butyl acrylate)

A novel approach is employed to produce core–corona nanospheres, which introduces a stereoregular hydrophilic part to an amphiphilic block copolymer. The resultant morphology is reported using isotactic‐poly(methacrylic acid)‐block‐poly(butyl acrylate). Infrared spectroscopy revealed a supramolecular interaction, and X ray diffraction revealed the crystallization of the outer isotactic‐poly(methacrylic acid) part. The nanostructure, which looks like a nanosized ‘grape’, was formed when nanospheres and nanofibers coexisted simultaneously and partially fused.

     

Convenient Method of Chain‐Growth Polycondensation for Well‐Defined Aromatic Polyamides

Summary: For the convenient synthesis of well‐defined poly(N‐octyl‐p‐benzamide)s with low polydispersities, the polycondensation of methyl 4‐octylaminobenzoate ( 1 ) was investigated. Methyl ester monomer 1 polymerized with lithium 1,1,1,3,3,3‐hexamethyldisilazide (LHMDS) in the presence of an initiator in tetrahydrofuran at −10 °C. The highly pure polyamide with a defined molecular weight and a low polydispersity is obtained after simple treatment of the reaction mixture with aqueous NaOH solution, followed by evaporation.

The chain‐growth polycondensation of 4‐octylaminobenzoic acid methyl ester ( 1 ) with lithium 1,1,1,3,3,3‐hexamethyldisilazide (LHMDS) to yield poly(N‐octyl‐p‐benzamide).     

Red Ionic Water‐Soluble Imidazolium‐Containing Polydiacetylene

Synthesis of a water‐soluble polydiacetylene has been achieved by topochemical polymerization in the solid state of the bis(N‐methylimidazolium)diacetylene monomer. Structural characterization for the monomer by X‐ray diffraction and NMR spectroscopy supports a photopolymerization initiated at the surface. Characterization of the polymer (NMR, UV and Raman spectroscopy, and dynamic light scattering) is given along with a molecular modelling interpretation of the polymerization in the solid state.

     

Surface‐Functionalized,Ring‐Opening Metathesis Polymerization‐Derived Monoliths for Anion‐Exchange Chromatography

Ring‐opening metathesis polymerization (ROMP) was used for the synthesis of monolithic capillary columns with inner diameters of 200 µm. The resulting polymeric monoliths were characterized by inverse size‐exclusion chromatography (ISEC). Surface functionalization was carried out in situ using 2‐(N,N‐dimethylaminoethyl)norborn‐5‐ene‐2‐ylcarboxylic amide ( 1 ). The resulting functionalized monoliths were successfully used in anion‐exchange chromatography of oligodeoxynucleotides.

     

Novel C60‐Anchored Two‐Armed Poly(tert‐butyl acrylate): Synthesis and Characterization

Summary: A multistep synthetic procedure for preparing novel C₆₀‐anchored two‐armed poly(tert‐butyl acrylate) was developed. First, two‐armed poly(tert‐butyl acrylate) bearing a malonate ester core with well‐controlled molecular weight was synthesized through atom transfer radical polymerization. The effective Bingel reaction between C₆₀ and the well‐defined polymer was then carried out to yield C₆₀‐anchored polymer. GPC, ¹H NMR, and UV‐vis spectroscopy indicated that the C₆₀‐anchored polymer was a monosubstituted and ‘closed’ 6,6‐ring‐bridged methanofullerene derivative.

Schematic of a novel C₆₀‐anchored two‐armed polymer.     

Synthesis and Characterization of β‐Cyclodextrin Based Functional Monomers and its Copolymers with N‐isopropylacrylamide

Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.

Synthesis route of monovinyl β‐CD monomers.     

Microwave Accelerated Polymerization of 2‐Phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine: Kinetics and Influence of End‐Groups on Glass Transition Temperature

Summary: The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine (PhOZI) with methyl tosylate (MeOTs) and butyl iodide (BuI) as initiators were performed in refluxing butyronitrile. Reaction kinetics under microwave irradiation was compared with conventional oil bath heating. The polymerization rates, under microwave irradiation, showed an acceleration by a factor of 1.8 (independently from the used initiator). The investigation of the thermal properties of the obtained poly(N‐benzoyl‐trimethyleneimine) showed the influence of molecular weight and end‐groups on the glass transition temperature.

The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine performed in refluxing butyronitrile.     

Amphiphilic Poly(4‐acryloylmorpholine)/Poly[2‐(N‐carbazolyl)ethyl acrylate] Random and Block Copolymers Synthesized by NMP

A series of random copolymers and block copolymers containing water‐soluble 4AM and fluorescent VAK are synthesized by NMP. The homopolymerizations of 4AM and VAK and 4AM/VAK random copolymerization are performed in 50 wt% DMF using 10 mol% SG1, resulting in a linear increase in versus conversion, and final polymers with narrow molecular weight distributions ( < 1.4). Reactivity ratios r_VAK = 0.64 ± 0.52 and r_4AM = 0.86 ± 0.66 are obtained for the 4AM/VAK random copolymerization. In addition, a poly(4AM) macroinitiator is used to initiate a surfactant‐free suspension polymerization of VAK. After 2.5 h, the resulting amphiphilic block copolymer has = 12.6 kg · mol^?1, = 1.48, molar composition F_VAK = 0.38 with latex particle sizes between 270 and 475 nm.

     

Enzyme‐Catalyzed Ring‐Opening Polymerization of Unsubstituted β‐Lactam

The synthesis of poly(β‐alanine) by Candida antarctica lipase B immobilized as novozyme 435 catalyzed ring‐opening of 2‐azetidinone is reported. After removal of cyclic side products and low molecular weight species pure linear poly(β‐alanine) is obtained. The formation of the polymer is confirmed with ¹H NMR spectroscopy and MALDI‐TOF mass spectrometry. The average degree of polymerization of the obtained polymer is limited to = 8 by its solubility in the reaction medium. Control experiments with β‐alanine as a substrate confirmed that the ring structure of the 2‐azetidinone is necessary to obtain the polymer.

     

New Heteroaromatic Polymers Consisting of Alkyl‐ and Amino‐1,3,5‐triazine Units. Their Basic Optical Properties and n‐Type Time‐of‐Flight Drift Mobility

Summary: Alternating copolymers between substituted 1,3,5‐triazine (substituent = alkyl or amine) and thiophene or bithiophene are synthesized. The copolymer of amino‐1,3,5‐triazine with thiophene is soluble in organic solvents, transparent in most parts of the visible region, and photoluminescent. The copolymer receives electrochemical n‐doping with an E_pc of −2.08 V vs Ag⁺/Ag and shows a time‐of‐flight electron drift mobility of 2.0 × 10⁻⁴ cm² · V⁻¹ · s⁻¹, which is larger than that of widely used Al(8‐quinolinolato)₃.

Structure of the poly(1,3,5‐triazine)s.     

Fluorescent Vesicles Consisting of Galactose‐based Amphiphilic Copolymers with a π‐Conjugated Sequence Self‐assembled in Water

Fluorescent vesicles considered as a mimic of natural primitive cells are prepared from poly(3‐hexylthiophene)‐block‐poly(3‐O‐methacryloyl‐D‐galactopyranose) P3HT‐b‐PMAGP copolymers. The unique characteristic of such vesicular nanostructures is their architecture, which comprises a hydrophobic π‐conjugated P3HT wall stabilized by a hydrophilic PMAGP interface featuring glucose units. The results of this work offer a very efficient and straightforward method for engineering well‐controlled fluorescent nanoparticles (without the addition of dyes), which provide an excellent support to the study of carbohydrate‐protein interactions.

     

Synthesis and Ring Opening Polymerization of a New Functional Lactone, α‐Iodo‐ε‐caprolactone: A Novel Route to Functionalized Aliphatic Polyesters

A new functional lactone, α‐iodo‐ε‐caprolactone (αIεCL), was synthesized from ε‐caprolactone by anionic activation using a non‐nucleophilic strong base (lithium diisopropylamide) followed by an electrophilic substitution with iodine chloride. Ring‐opening (co)polymerizations of the resulting monomer with ε‐caprolactone were carried out using tin 2‐ethylhexanoate as a catalyst in toluene at 100 °C. Homopolymerization of αIεCL was achieved, and poly(αIεCL) was fully characterized by SEC, ¹H NMR and elemental analysis. Random copolymerizations of αIεCL with εCL were controlled with experimental molecular weights close to the theoretical values, narrow molecular weight distributions and a good agreement between experimental and theoretical molar compositions of αIεCL.