A Density Functional Theory Study of Secondary Reactions in n‐Butyl Acrylate Free Radical Polymerization

In this work, secondary reactions involved in the free radical polymerization of butyl acrylate are investigated using quantum chemistry. First, various backbiting reactions are studied by adopting a simplified molecular model suitable for treating long polymer chains. The predicted reaction kinetics suggest the possibility of a radical migration along the poly(butyl acrylate) (PBA) chain as a consequence of subsequent j:j + 4 hydrogen abstractions, which are characterized by a low activation energy. Moreover, branching propagation and β‐scission reactions originating from mid‐chain radicals are investigated using a complete PBA model composed of five monomer units. The reaction kinetics involving short‐branch radicals are also examined, and a novel backbiting step leading to the formation of short branches is proposed.

     

DMAP/Cr(III) Catalyst Ratio: The Decisive Factor for Poly(propylene carbonate) Formation in the Coupling of CO2 and Propylene Oxide

Highly efficient formation of poly(propylene carbonate) can be achieved in the coupling of CO₂ and propylene oxide assisted by 4‐(N,N‐dimethylamino)pyridine (DMAP) and catalyzed with salen chromium(III) chloride by using DMAP/Cr ratios of less than 2. Under these conditions a possible backbiting mechanism is suppressed, leading to only minor amounts of cyclic carbonate as a side product.

     

Prediction of Polymer Properties from their Structure by Recursive Neural Networks

Summary: We propose a new approach for predicting polymer properties from structured molecular representations based on recursive neural networks. To this aim, a structured representation is designed for the modeling of polymer structures. This representation can also account for average macromolecule characteristics. Preliminarily, this model is applied to the calculation of the T_g of (meth)acrylic polymers with different stereoregularity.

Representation of poly(methyl methacrylate) as a chemical tree and unfolding of the encoding process through its structure.     

Stabilization of Polymer Bilayers by Introducing Crosslinking at the Interface

Summary: Bisphenol A solid epoxy serves as an effective reaction compatibilizer to the bisphenol A polycarbonate (PC)/PMMA bilayer systems. Addition of epoxy to the bottom PMMA layer can retard or even prevent the dewetting of PC films by introducing crosslinking between both components at the interface. This is the first investigation of polymer bilayers stabilized by chemical reactions.

AFM topographic image of a representative dewetting hole.     

A Rapid Eco‐Friendly Synthesis of Poly(butylene succinate) by a Direct Polyesterification under Microwave Irradiation

Summary: A rapid and eco‐friendly synthesis of poly(butylene succinate) (PBS) using microwaves was developed in the presence of 1,3‐dichloro‐1,1,3,3‐tetrabutyldistannoxane as catalyst. To determine the optimum conditions, the effect of catalyst concentration, bulk vs. solution polymerization, reaction time, temperature, and stoichiometry of the monomers were studied. Based on the optimum conditions, PBS with a weight‐average molecular weight of 2.35 × 10⁴ was obtained in a short time of 20 min.

Synthesis of poly(butylene succinate) under microwave irradiation.     

Ordered Honeycomb‐Structured Films from Dendronized PMA‐b‐PEO Rod‐Coil Block Copolymers

Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO₁₁₃‐b‐PDMA₈₂) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.

     

Determination of Propagation Rate Coefficient of Acrylates by Pulsed‐Laser Polymerization in the Presence of Intramolecular Chain Transfer to Polymer

Unusual difficulties are faced in the determination of propagation rate coefficients (k_p) of alkyl acrylates by pulsed‐laser polymerization (PLP). When the backbiting is the predominant chain transfer event, the apparent k_p of acrylates determined in PLP experiments for different frequencies should range between k_p (propagation rate coefficient of the secondary radicals) at high frequency and k at low frequency. The k value could be expressed from kinetic parameters: , where k_fp is the backbiting rate coefficient, k_p2 is the propagation rate coefficient of mid‐chain radicals, and [M] is the monomer concentration.

Apparent propagation rate coefficients determined for different frequencies by simulating the PLP of n‐butyl acrylate at 20 °C. Horizontal full lines show the values of k_p and k.     

Darstellung und Stabilität von Aroxy-fluor-silanen

Preparation and Stability of Aroxy-fluoro-silanes. Different possibilities for preparation of aroxy-fluoro-silanes (esp. substituted phenoxy-fluoro-silanes) are investigated. The reaction was proved as the best method of preparation. The aroxy-fluoro-silanes are disposed to dismutation reactions.     

Oxazolidines versus schiff bases

The formation of oxazolidines from propionaldehyde and aliphatic β-aminoalcohols is complicated by the appearance of appreciable amounts of unsaturated Schiff bases. The simple Schiff base, often the dominant species when aromatic aldehydes react with amines, could not be detected in the present aliphatic systems. We conclude that in aliphatic systems the order of stability is and . The gem-dimethyl group α to nitrogen stablizes the heterocyclic ring remarkably.     

Multiscale Modeling of Branch Length in Butyl Acrylate Solution Polymerization

Branch lengths resulting from both backbiting and intermolecular chain transfer to polymer are examined for the solution polymerization of butyl acrylate, using a rate‐equation model and ordinary differential equations. Backbiting is allowed to generate branches of varying length, according to a cumulative distribution function obtained from a lattice kinetic Monte Carlo simulation. About 8% of the branches produced by backbiting are 10 mers or longer. In contrast to common assumptions about the origins of short‐chain and long‐chain branches, the model indicates that nearly all of the long‐chain branches may be produced by backbiting, rather than intermolecular chain transfer to polymer.

     

Enhancement of Electrochromic Contrast by Tethering Conjugated Polymer Chains onto Polyhedral Oligomeric Silsesquioxane Nanocages

Copolymerization of aniline with octa(aminophenyl) silsesquioxane (OAPS) was performed, which resulted in polyaniline‐tethered, polyhedral oligomeric silsesquioxane (POSS‐PANI), with star‐like molecular geometry. The spectro‐electrochemical studies show that the electrochromic contrast of POSS‐PANI is much higher than that of polyaniline (PANI). The great improvement can be attributed to the more accessible doping sites and the facile ion movement during the redox switching, brought by the loose packing of the PANI chains. This was evidenced by a drastic increase in ionic conductivity, a decrease in the electrical conductivity, and a decrease in the crystallinity and crystal size, with the increase of the OAPS concentration in the POSS‐PANI.

     

Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Catalytic Polymerizations of Hydrophobic,Substituted, Acetylene Monomers in an Aqueous Medium by Using a Monomer/Hydroxypropyl‐β‐cyclodextrin Inclusion Complex

Ten hydrophobic, substituted, acetylene monomers were examined as to their abilities to form an inclusion complex with hydroxypropyl‐β‐cyclodextrin (HPCD). Only the monomers with suitable substitutents were found to form the monomer/HPCD complex, which was identified by NMR, FTIR, and UV‐vis spectroscopy. Polymerizations of the monomers were successfully carried out in aqueous solution by using the prepared monomer/HPCD inclusion complex and by using a water‐soluble Rh‐based catalyst, [Rh(cod)₂BF₄] or [Rh(nbd)(H₂O)OTs]. Such polymerizations provided high‐yield (>90%) polymers with a cis content of approximately 100%. The as‐prepared polymers could take an ordered helical conformation, just like their counterparts obtained in organic solvents.

     

Propylene Polymerization with Bis(phenoxy‐imine) Group‐4 Catalysts Using iBu3Al/Ph3CB(C6F5)4 as a Cocatalyst

The catalytic behavior of three bis(phenoxy‐imine) group‐4 transition‐metal complexes (M = Ti, Zr, Hf), with ⁱBu₃Al/Ph₃CB(C₆F₅)₄ cocatalyst systems towards propylene polymerization was investigated under atmospheric pressure at 25 °C. The Ti complex produced ultrahigh‐molecular‐weight atactic poly(propylene), whereas Zr and Hf complexes formed high‐molecular‐weight isotactic poly(propylene)s via a site‐control mechanism. The isotactic poly(propylene) obtained with the Hf complex displayed a high melting temperature of 123.8 °C.

     

Diffusion Through Membranes of the Polyelectrolyte Complex of Chitosan and Alginate

The swelling of membranes of the polyelectrolyte complex (PEC) between chitosan and alginate shows a similar pattern to that of other PECs. However, if the swelled membranes are dried, a second swelling process is seen which exhibits Fickian behavior. The apparent activation energy was estimated to be 32.8 kJ · mol^?1. The release rate of model solutes was highly dependent on their molecular weight and the pH of the medium.

Arrhenius type plot of the temperature dependence of the apparent diffusion coefficients for the membrane of the polyelectrolyte complex between chitosan and alginate in water.