Investigation of stepwise covalent synthesis on a surface yielding porphyrin-based multicomponent architectures

Porphyrins have been shown to be a viable medium for use in molecular-based information storage applications. The success of this application requires the construction of a stack of components ("electroactive surface/tether/charge-storage molecule/linker/electrolyte/top contact") that can withstand high-temperature conditions during fabrication (up to 400 degrees C) and operation (up to 140 degrees C). To identify suitable chemistry that enables in situ stepwise synthesis of covalently linked architectures on an electroactive surface, three sets of zinc porphyrins (22 altogether) have been prepared. In the set designed to form the base layer on a surface, each porphyrin incorporates a surface attachment group (triallyl tripod or vinyl monopod) and a distal functional group (e.g., pentafluorophenyl, amine, bromo, carboxy) for elaboration after surface attachment. A second set designed for in situ dyad construction incorporates a single functional group (alcohol, isothiocyanato) that is complementary to the functional group in the base porphyrins. A third set designed for in situ multad construction incorporates two identical functional groups (bromo, alcohol, active methylene, amine, isothiocyanato) in a trans configuration (5,15-positions in the porphyrin). Each porphyrin that bears a surface attachment group was found to form a good quality monolayer on Si(100) as evidenced by the voltammetric and vibrational signatures. One particularly successful chemistry identified for stepwise growth entailed reaction of a surface-tethered porphyrin-amine with a dianhydride (e.g., 3,3',4,4'-biphenyltetracarboxylic dianhydride), forming the monoimide/monoanhydride. Subsequent reaction with a diamine (e.g., 4,4'-methylene-bis(2,6-dimethylaniline)) gave the bis(imide) bearing a terminal amine. Repetition of this stepwise growth process afforded surface-bound oligo-imide architectures composed of alternating components without any reliance on protecting groups. Taken together, the ability to prepare covalently linked constructs on a surface without protecting groups in a stepwise manner augurs well for the systematic preparation of a wide variety of functional molecular devices.     

Photoluminescence of Ba3W2O9: Confirmation of a structural principle

The crystal structure of Ba₃W₂O₉ contains isolated W₂O^6?₉ groups. These are reported to luminesce efficiently. This shows that clusters of tungstate octahedra emit more efficiently than the isolated species.     

Photoluminescence of 2-aminofluorene: a relook

The absorption and fluorescence spectra of 2-aminofluorene (2-AF) have been studied as a function of solvent polarity and acid concentration. Using the multiparametric approach of Taft et al., it is clear that 2-AF is a better proton acceptor in the S₀ state and a proton donor in the S₁ state. Excitation of 2-AF to three electronically excited states has shown that fluorescence is always observed from the lowest excited singlet state, but fluorescence quantum yield increases with the increase of λ_exc. The decrease in fluorescence quantum yield with increase in solvent polarity and hydrogen bonding is due to solvent-induced quenching. A correspondence is observed between the decrease and increase in fluorescence intensities of the neutral and monocation, respectively, in the pH range from 6 to 3. Proton-induced fluorescence quenching of neutral 2-AF is noticed in the pH range 3 to 1. pK_a and values were determined for different prototropic equilibria and are discussed.     

Effects of covalent versus non-covalent interactions on the electrocatalytic behavior of tetracarboxyphenoxyphthalocyanine in the presence of multi-walled carbon nanotubes

Tetracarboxyphenoxy phthalocyanine was covalently linked to multi-walled carbon nanotubes and the conjugate was used for modification of glassy carbon electrodes for the detection of hydrogen peroxide. The electrocatalytic behavior was examined by cyclic voltammetry, square wave voltammetry, and rotating disk electrode. The results show that covalent linking is attractive in terms of high detecting currents, low overpotential, and high catalytic rate constants. Very low detection limits were observed with CoTCPhPc-DAMN-MWCNT(linked)-GCE at 0.33 nM. The resulting catalytic rate constant was 1.1 × 10³ M^?1s^?1.     

Photoluminescence of a freely suspended monolayer of quantum dots encapsulated into layer-by-layer films

A single monolayer of CdSe/ZnS quantum dots (QDs) has been encapsulated into a 60 nm free-suspended layer-by-layer (LbL) film. The QD monolayer showed a low light-emission within this film in contact with supporting solid substrates, but the manifold increase of photoluminescencence intensity was observed when the film was lifted and freely suspended over the microfabricated cylindrical cavities. This phenomenon was discussed in relationship with the effect of the elimination of the surface quenching enhanced by optical reflection from highly reflective silicon cavities. We suggest that a significant increase of the photoluminescence intensity of QD monolayers suspended over the microfabricated array can be interesting for future diagnostic and sensing applications.     

Hydrothermal conditions on Sn0.95Co0.05O2: nanostructures, ferromagnetism and optical behavior

We have studied the effect of hydrothermal conditions at constant temperature of 180 °C, varying preparation time for 15, 30 and 45 h on nanostructures of diluted magnetic semiconductor Sn_0.95Co_0.05O₂ (SC5). X-ray diffraction pattern confirm the tetragonal SnO₂ rutile phase. The transmission and scanning electron microscopy shows the resulting nanostructures i.e. nanospheres and nanorods. The proposed reaction mechanism is given. The Raman spectra show the formation of tetragonal rutile structure of SC5 nanostructures. Fourier transform infrared spectrum has been used to verify the existence of Sn–O bond. The photoluminescence spectra show that the emission spectral intensity increases gradually with decreasing grains size, increasing hydrothermal heating time of SC5 samples and exhibits an intense blue luminescence centered at a wavelength of 531 nm. The optical absorbance measurements revealed that the nanometric size of the materials influences the energy band gap. All the prepared SC5 samples exhibit room temperature ferromagnetism.     

Preparation of a vast CoFe2O4 magnetic monolayer by Langmuir-Blodgett technique

The preparation of ultrathin films of CoFe2O4 nanocrystallites is reported. TEM images of them showed 2-dimensional assembly of particles, demonstrating the uniformity of these nanocrystallites. The formation of a Langmuir monolayer of the surface coated CoFe2O4 nanocrystallites with oleate at the air/water interface and its stability were studied with pressure-area isotherm curves and Brewster Angle Microscope (BAM) images. Surface pressure vs surface area isotherms and TEM studies demonstrated that the increasing surface pressure resulted in a transition from a complex with well-separated domains of nanocrystallites to well-compressed, monoparticulate layers, and, ultimately, to multiparticulate layers.     

Characterization of anomalous flow and phase behavior in a Langmuir monolayer of 2-hydroxy-tetracosanoic acid

Langmuir monolayers of long-chain fatty acids display a wide range of interesting flow and phase behaviors, but the correlation between these behaviors varies. In this paper, we report two interesting behaviors in a Langmuir monolayer of 2-hydroxy-tetracosanoic acid: phase coexistence between the L(2h) and L(2)' phases over a large pressure range and a peak in the viscosity and elastic modulus of the material as a function of pressure. The two behaviors are confirmed over a range of temperatures for which the location of the undistorted lattice appears to vary relative to the range of coexistence for the two phases. Evidence for a correlation between the phase behavior and the peak in the mechanical properties is presented.     

Oxidation of furfural with H2O2 in the presence of a photogenerated iron catalyst

Visible irradiation of a methanolic solution of furfural containing dilute aqueous H₂O₂ and [FeCp(C₆H₅R)]PF₆ (1: R  H, Cl or CH₃) as catalyst yields methyl 2-furoate quantitatively. After photodecomplexation, the inorganic Fe^II,III catalyst can be isolated and recycled several times with unchanged activity in dark reactions at 20°C.     

Acetophenone hydrogenation over a Pd catalyst in the presence of H2O and CO2

The addition of carbon dioxide and water enhances acetophenone hydrogenation activity over an activated carbon-supported palladium catalyst, and 1-phenylethanol can be easily recovered without distillation and neutralization. Two liquid phases (water and acetophenone) are indispensable for enhancement of the hydrogenation rate.     

Autocatalytic formation of green heme: evidence for H2O2-dependent formation of a covalent methionine-heme linkage in ascorbate peroxidase

The mammalian heme peroxidases are distinguished from their plant and fungal counterparts by the fact that the heme group is covalently bound to the protein through ester links from glutamate and aspartate residues to the heme 1- and 5-methyl groups and, in the case of myeloperoxidase, through an additional sulfonium link from the Cbeta of the 2-vinyl group to a methionine residue. To duplicate the sulfonium link in myeloperoxidase and to obtain information on its mechanism of formation, we have engineered a methionine residue close to the 2-vinyl group in recombinant pea cytosolic ascorbate peroxidase (rpAPX) by replacement of Ser160 by Met (S160M variant). The S160M variant is isolated from Escherichia coli as apo-protein. Reconstitution of apo-S160M with exogenous heme gives a red protein (S160M(R)) which has UV-visible (lambda(max)/nm = 407, 511, 633) and steady-state kinetic (kcat = 156 +/- 7 s(-1), KM = 102 +/- 15 microM) properties that are analogous to those of rpAPX. The reaction of S160M(R) with H2O2 gives a green protein (S160M(G)). Electronic spectroscopy, mass spectrometry, and HPLC analyses are consistent with the formation of a covalent linkage between the methionine residue and the heme vinyl group in S160M(G). Single-wavelength and photodiode array stopped-flow kinetic analyses identify a transient Compound I species as a reaction intermediate. The results provide the first direct evidence that covalent heme linkage formation occurs as an H2O2-dependent process that involves Compound I formation. A mechanism that is consistent with the data is presented.     

Two-dimensional supercritical behavior of an ethanol monolayer: a molecular dynamics study

The two-dimensional (2D) supercritical behavior of an ethanol monolayer formed at the vapor/liquid interface of an ethanol solution has been investigated by a molecular dynamics (MD) calculations with a combination of the OPLS-UA and SPC/E potential models. A 100 A thick slab of ethanol solution was placed at the volume center of the rectangular unit cell by 10 A thick nonabsorbate water surfaces. With such an initial configuration, five independent 15 ns NVT constant MD calculations were carried out under 298.15 K, in which the initial ethanol mole fraction of the bulk solution layer was set to 0.010, 0.022, 0.045, 0.10, and 0.20, respectively. The 2D radial distribution function (rdf) of an adsorbed ethanol molecule showed that the ethanol monolayer could be regarded as a 2D fluid where the adsorbed ethanol molecule had an effective 2D diameter of 4.65 A. On the basis of the 2D rdf result, 2D cluster analysis was carried out from the perspective of the percolation theory. It is confirmed that the critical area occupation probability density, the critical exponents, and the fractal dimension of both nonpercolating and percolating clusters satisfied their nature of universality. Therefore, we concluded that an ethanol monolayer formed at the vapor/liquid interface of ethanol solution behaves as a 2D supercritical fluid at 298.15 K.     

Chloroform infrared multiphoton dissociation in the presence of O2 and NO2

The infrared multiphoton dissociation (IRMPD) of CDCl3 in the presence of O2 and NO2 as acceptor gases has been studied. We have worked with both pure CDCl3 and mixtures with CHCl3. The reaction mechanism following IRMPD of CDCl3 is discussed in detail. CCl2O, CCl4 and DCl were found to be the main products. With added O2, the observed CDCl3 dissociation was larger than with nonoxygenated acceptor gases. The reaction mechanism probably involves a catalytic cycle initiated by the oxidation of CCl3. With the aim of discriminating the different CDCl3 dissociation mechanisms, the IRMPD of CDCl3 in the presence of NO2 was first studied. In order to make evident the CDCl3 dissociation produced by the catalytic cycle, we then studied the IRMPD of CDCl3 in mixtures with CHCl3 with O2 as the acceptor gas. In this case, the dissociation mechanism subsequent to IRMPD is evidenced in the competence between the two isotopic species.     

Electrochemical control of CO/NO ligand exchange in a triruthenium cluster monolayer assembled on a gold electrode surface

A highly selective ligand exchange reaction is realized in the self-assembled monolayer (SAM) of a triruthenium cluster on a gold electrode surface under precise electrochemical potential control. CO as well as NO molecules, which are known to play key roles in many chemical, biological, and environmental systems, can be efficiently introduced into the SAM by electrochemically tuning the electronic state of the Ru site. These unique surface reactions are more convenient and efficient than conventional ligand exchange reactions in solution and could be used for the elucidation of the electron-transfer mechanism in a biological system as well as in the development of molecular sensors and devices.     

Self-organized monolayer assemblies of octopusporphyrins: photoinduced electron transfer and O 2 coordination in aqueous media

Bolaamphiphilic tetraresorcinolporphyrins with eight long side chains (octopusporphyrins) and their metal complexes form monolayered assemblies in bulk aqueous solution. The nano-structure, the photoinduced electron transfers and the O₂ coordination of these octopusporphyrin assemblies are described. In the micellar fibers of 1a and 1b, a unique spherical arrangement of eight methyl groups on both sides of the porphyrin ring plane provides hydrophobic porphyrin centers which align in a string of pearls. Exciton calculations indicated a tilt stacking porphyrins arrangement with a separation of 11 Å. These fibers fluoresced strongly; electron transfer reaction was therefore observed between the porphyrin center and hydrophobic quenchers as well as hydrophilic quenchers. The fibers were also active as photocatalysts in the reduction of dimethylviologen by triethanolamine. Octopusporphyrins with different metal centers can also produce fibrous aggregates, for example, H₂P/Zn(II)P and Zn(II)P/Fe(III)P couples. The fluorescence quenching of Zn(II)P in the Zn(II)P/Fe(III)P hybrid fibers can be ascribed to the intermolecular electron transfer within the fibers. In H₂P/Zn(II)P couple, excitation energy transfer from excited Zn¹*P to H₂P occurred after photoexcitation. Octopusporphyrin with four dialkylglycerophosphocholine groups on both sides of the ring plane ( 2b ) forms spherical unilamellar vesicles. Based on cryomicroscopy, a white line was observed with a diameter of 15 Å in the middle of the membrane which are obviously a porphyrin layer with low molecular packing. The octopusheme ( 2c ) vesicles prepared in a similar manner with 20-fold excess molar coexistence of 1-dodecyl-2-methylimidazole (DMIm) can bind and release oxygen reversibly at 25°C. Moreover, water-soluble octopusporphyrin ( 3a ) produced fluorescent and non-fluorescent monolayer assemblies by anion exchange of the head groups, e.g. 3a with sodium perchlorate showed planar sheets. An exciton calculation is consistent with a two-dimensional arrangement with porphyrin separations of 25.6 and 17.4 Å in the x- and y-directions, respectively. External addition of negatively charged electron acceptors, naphtoquinone sulfonate and anthraquinone sulfonate, led to partial quenching of the fluorescence of the central porphyrin layer. The results have been evaluated using equations derived for this special quenching. © 1998 John Wiley & Sons, Ltd.     

Surface chemistry of Cu in the presence of CO2 and H2O

The chemical nature of copper and copper oxide (Cu 2O) surfaces in the presence of CO 2 and H 2O at room temperature was investigated using ambient pressure X-ray photoelectron spectroscopy. The studies reveal that in the presence of 0.1 torr CO 2 several species form on the initially clean Cu, including carbonate CO 3 (2) (-), CO 2 (delta-) and C (0), while no modifications occur on an oxidized surface. The addition of 0.1 ML Zn to the Cu results in the complete conversion of CO 2 (delta-) to carbonate. In a mixture of 0.1 torr H 2O and 0.1 torr CO 2, new species are formed, including hydroxyl, formate and methoxy, with H 2O providing the hydrogen needed for the formation of hydrogenated species.     

白光LED用SrAl_2Si_2O_8∶Eu~(2+)荧光粉的制备与发光性能研究

采用高温固相法制备了SrAl2Si2O8∶Eu2+系列荧光粉,研究了灼烧温度以及助熔剂硼酸浓度和激活剂Eu2+离子浓度对发光性能的影响,研究了SrAl2Si2O8的微结构。结果表明,以3.0wt%H3BO3为助熔剂,在1250℃灼烧3h可制备发光性能优良的SrAl2Si2O8∶Eu2+荧光粉,Eu2+离子的最佳掺杂浓度为2.5mol%,Eu2+离子浓度过大时的浓度猝灭是由电偶极-电四极之间的相互作用引起的。SrAl2Si2O8∶Eu2+的激发和发射光谱均为宽带谱,在280～380nm光的激发下,可发射峰值波长位于429nm的蓝色光。