Carbon nanotube-polyaniline hybrid materials

A hybrid material of carbon nanotubes (CNTs)-polyaniline (PANI) was prepared by in situ emulsion polymerization. The structural characterization showed that some CNTs were linked up by PANI chains, which appears to be like a network including PANI fiber and nanotubes. This network results in the hybrid material having highly conductivity with new conductive passageway. The conductivity and thermal properties of hybrid materials depend on the content of CNTs. The CNTs do not affect the structure of PANI chains.     

Polydimethylsiloxane–graphene oxide composite improving performance by ion beam irradiation

A hybrid film consisting of graphene oxide covered with poly(dimethylsiloxane) was prepared via spin coater and followed by thermal annealing to improve the bond strength of the polymerized systems. Direct patterning on both graphene oxide and hybrid graphene oxide–poly(dimethylsiloxane) foils by ion microbeam was performed to induce localized reduction in the ion irradiated material. It is well established that the ion irradiation of graphene oxide induces modifications in its electrical, mechanical, and optical properties and disorder in the carbon crystal structure and defect production. The presence of poly(dimethylsiloxane) can be useful as it confers flexibility to the produced pattern and oxygen permeability from the graphene oxide surface. Rutherford backscattered spectroscopy and elastic recoil detection analysis were performed to evaluate the compositional changes in the composite. Atomic force microscopy studied the pattern fidelity. The electrical conductivity of the hybrid material was used to evaluate the changes induced during the proton irradiation of the material.     

Exfoliated graphite nanosheets/carbon nanotubes hybrid materials for superior performance supercapacitors

Nanostructured hybrid material of exfoliated graphite nanosheets and carbon nanotubes (GNSNT) served as supercapacitor electrode materials was presented. The nanostructured hybrid was prepared by a facile chemical reduction method. The hybrid material was characterized by X-ray diffraction technique, transmission electron microscopy, scanning electron microscopy, cyclic voltammetry, galvanostatic charge/discharge cycling, and four-point probe conductivity measurement to represent a well-defined nanostructure possessing a vast number of active sites and delivering the ingredients for a fast effective charge separation network. Our results clearly demonstrated that the hybrid possess a superior performance. A specific capacitance value 266 F/g was obtained for GNSNT hybrid electrode at a current density of 0.1 A/g, while it was only 185 F/g for exfoliated graphite nanosheets (GNS). At a higher current density of 2 A/g, the GNSNT electrode still keeps a specific capacitance of 220 F/g, which is more than double that of GNS. This synergistic effect of the nanostructured hybrid material offers an effective network for charge separation and therefore renders a significantly enhanced specific capacitance and rate capability.     

Effect of Different Hybrid Method on Properties of Carbon Nanotubes/Dolomite Hybrid Filled Phenolic Composites

Hybridization of multi wall carbon nanotubes (MWCNTs) with other filler in polymer matrix composites (PMC) is one of the techniques for combining different properties of fillers for making more unique composites. In this work, the hybrid filler (CNTs–dolomite) are prepared via chemical vapour deposition (CVD hybrid) and the milling method (physically hybrid). The effect of different hybrid method on properties of multi wall carbon nanotubes/dolomite hybrid filled phenolic composites were studied. Phenolic/CVD hybrid composites and phenolic/physically hybrid composites with different filler loadings were prepared using hot mounting press. The prepared samples were characterized for their thermal conductivity and hardness. The thermal conductivity was measured using the Transient Plane Source (TPS) method, using a Hot-DiskTM Thermal Constant Analyzer and the hardness was measured using Rockwell micro-hardness. The results showed that at 5% filler loading, the phenolic/CVD hybrid composites were capable of increasing the thermal conductivity and micro-hardness up to 7.22% and 101.6% respectively compared to pure phenolic.     

A novel strategy to prepare LDH networks loaded carbon structure by C-MEMS techniques for glucose detection

NiAl-layered double hydroxide (NiAl-LDH) networks loaded carbon microcylinder (CMC) hybrid was synthesized for the first time using typical carbon based microelectromechanical systems (C-MEMS) techniques combined with in situ growth progress. The incorporation of NiAl-LDH on C-MEMS structures via a simple pyrolysis of modified photoresist was investigated. With proper control of parameters in lithography and hydrothermal processes, the NiAl-LDH/CMC composites with suitable morphology were fabricated. When the composites applied as new catalytic material for glucose detection, this simple sensor showed satisfying electrocatalytic properties towards glucose oxidation owing to its unique structure and excellent electric conductivity. It is also worth pointing out that this novel fabrication process can equip carbon microfeatures with various nanostructures, and have wide potential applications in scaling up carbon based nanocomposites.     

Improvement of thermoplastic polyurethane's flame retardancy and thermal conductivity by leaf‐shaped cobalt‐zeolitic imidazolate framework–modified graphene and intumescent flame retardant

In this work, a new type of leaf‐shaped cobalt‐zeolitic imidazolate framework–modified graphene (Co‐ZIF‐L@RGO) hybrid was successfully prepared and blended with an intumescent flame retardant (IFR). It was added into thermoplastic polyurethane (TPU) to study the effect of its combination with IFR on the thermal conductivity and flame retardant performance of TPU. The morphology and structure of the Co‐ZIF‐L@RGO hybrid were characterized by scanning electron microscope (SEM), Fourier transform infrared and X‐ray diffraction (XRD). The results showed that Co‐ZIF‐L were uniformly loaded on the surface of graphene. Furthermore, compared with pure TPU, the limiting oxygen index values of the composite material with 3 wt% Co‐ZIF‐L and 27 wt% IFR increased to 32.6%. Their UL‐94 rating reached V‐0 rating. Their peak heat release rate, total heat release, peak smoke production rate and total smoke production were also greatly reduced by 84.4%, 70.1%, 60.3% and 62.5%, respectively. The thermogravimetric‐infrared test results showed that the amount of toxic gas emissions was effectively suppressed. The residual carbon was analyzed by SEM, laser Raman spectroscopy and XRD, and flame retardant mechanism was further investigated. Besides, the addition of this hybrid improved the thermal conductivity of TPU.     

One-step preparation of silver nanoparticle embedded amorphous carbon for nonenzymatic hydrogen peroxide sensing

Herein, we report a rapid and facile fabrication of Ag/C hybrid by anchoring Ag nanoparticles in amorphous carbon network for application in amperometric sensing of hydrogen peroxide. Ag/C hybrid was prepared by simply mixing silver nitrate aqueous solution with ethylene glycol and diphosphorus pentoxide in one step at room temperature. The embedding of Ag nanoparticles into the amorphous carbon support can greatly strengthen the stability of Ag nanoparticles, protecting them from oxidizing without loss of conductivity. The nanocomposite was investigated by transmission electron microscopy, energy dispersive X-ray analysis, X-ray diffraction technique, X-ray photoelectron spectroscopy and electrochemical measurements. The prepared Ag/C hybrid was fabricated onto the surface of glassy carbon electrode to investigate the sensing property towards hydrogen peroxide. The fabricated electrochemical sensor can determine hydrogen peroxide with a detection limit of 0.1 μM and up to 5.5 mM.     

Enhancing the performances of Li-ion batteries by carbon-coating: present and future

With progress of knowledge of electrode materials, it has been found that their surface structures are of great importance to the electrochemical performance of Li-ion batteries. Carbon coating can effectively increase the electrode conductivity, improve the surface chemistry of the active material, and protect the electrode from direct contact with electrolyte, leading to enhanced cycle life of the batteries. Carbon coating together with nanotechnology provides good conductivity as well as fast Li-ion diffusion, and thus also results in good rate capabilities. The recent development of carbon coating techniques in lithium-ion batteries is discussed with detailed examples of typical cathode and anode materials. The limitation of current technology and future perspective of the new concept of "hybrid coating" are also pointed out.     

碳和石墨烯对磷酸锰锂材料性能的影响

在采用溶剂热法制备磷酸锰锂的基础上,以蔗糖和石墨烯为碳源,制备了裂解碳和石墨烯含量不同的磷酸锰锂/碳/石墨烯复合材料,研究了裂解碳和石墨烯对材料性能的影响。采用扫描电镜（SEM）和透射电镜（TEM）对材料的形貌进行了表征。裂解碳包覆可以提高LiMnPO₄纳米片表面的电子导电性,对于材料性能的改善起到主要的作用;石墨烯可以提高纳米片之间的电子和离子导电性,改善材料的电化学性能。电化学测试表明,当裂解碳含量为4%、石墨烯含量为2%时,LiMnPO₄电极具有较好的电化学性能,在0.5C下的放电比容量为139.1 mAh·g^-1,循环100次后,容量保持率为93.6%。与添加单一碳和单一石墨烯的LiMnPO₄电极相比,该电极在0.5C下的放电比容量分别提高了35.0%和48.6%。     

碳和石墨烯对磷酸锰锂材料性能的影响

在采用溶剂热法制备磷酸锰锂的基础上,以蔗糖和石墨烯为碳源,制备了裂解碳和石墨烯含量不同的磷酸锰锂/碳/石墨烯复合材料,研究了裂解碳和石墨烯对材料性能的影响。采用扫描电镜(SEM)和透射电镜(TEM)对材料的形貌进行了表征。裂解碳包覆可以提高LiMnPO_4纳米片表面的电子导电性,对于材料性能的改善起到主要的作用;石墨烯可以提高纳米片之间的电子和离子导电性,改善材料的电化学性能。电化学测试表明,当裂解碳含量为4%、石墨烯含量为2%时,LiMnPO_4电极具有较好的电化学性能,在0.5C下的放电比容量为139.1 m Ah·g-1,循环100次后,容量保持率为93.6%。与添加单一碳和单一石墨烯的LiMnPO_4电极相比,该电极在0.5C下的放电比容量分别提高了35.0%和48.6%。     

Ultrathin MoS2 Nanosheets Supported on N‐doped Carbon Nanoboxes with Enhanced Lithium Storage and Electrocatalytic Properties

Molybdenum disulfide (MoS₂) has received considerable interest for electrochemical energy storage and conversion. In this work, we have designed and synthesized a unique hybrid hollow structure by growing ultrathin MoS₂ nanosheets on N‐doped carbon shells (denoted as C@MoS₂ nanoboxes). The N‐doped carbon shells can greatly improve the conductivity of the hybrid structure and effectively prevent the aggregation of MoS₂ nanosheets. The ultrathin MoS₂ nanosheets could provide more active sites for electrochemical reactions. When evaluated as an anode material for lithium‐ion batteries, these C@MoS₂ nanoboxes show high specific capacity of around 1000 mAh g^?1, excellent cycling stability up to 200 cycles, and superior rate performance. Moreover, they also show enhanced electrocatalytic activity for the electrochemical hydrogen evolution.     

Fabrication of a label-free electrochemical immunosensor of low-density lipoprotein

The silver chloride@polyaniline (PANI) core-shell nanocomposites (AgCl@PANI) combined with Au nanoparticles (AuNPs) were used to prepare the AuNPs-AgCl@PANI hybrid material. A novel sensitive label-free low-density lipoprotein (LDL) electrochemical biosensor was fabricated by adsorption of antibody to apolipoprotein B-100 (aopB-100) on an AuNPs-AgCl@PANI-modified glassy carbon (GC) electrode. The hybrid material could provide surface for high antibody loading due to its large surface-to-volume ratio. Since each LDL has an apoB-100 on its phospholipids coat, they could be bonded to the electrode surface through the specific antibody-antigen reaction. Electrochemical impedance spectroscopy (EIS) was used to characterize the recognition of LDL. The negative charges carried by LDL phospholipids coat would block the electron transfer of the [Fe(CN)6]3-/4- redox couple severely. In addition, the conductivity of LDL is very poor, so small amounts of LDL on the electrode could result in great change in the electron-transfer resistance (Ret). The biosensor exhibited a highly sensitive response to LDL with a detection limit of 0.34 pg/mL, and some factors that would affect the performance of the biosensor were studied, such as incubation time and temperature.     

Enhanced conductivity composites for aircraft applications: carbon nanotube inclusion both in epoxy matrix and in carbonized electrospun nanofibers

The potential of carbonized electrospun nanofiber mats to render epoxy resin composites for aircraft applications electrically and thermally more conductive was investigated. The effect of carbon nanotube inclusion both inside the carbon nanofiber and in the epoxy resin matrix material was studied, in order to reveal any synergistic effects of multilevel presence of nanosized reinforcements on the conductivity and mechanical properties. The carbon nanotube inclusion into the carbonized nanofibers increased the electrical conductivity of the samples by 20–50% and the thermal conductivity by approximately three times leading to a higher value than that of the conventional composites. The preparation of layered composites with a conductive upper layer containing nonwoven carbon nanofabric and a load bearing lower layer with conventional unidirectional carbon fiber reinforcement can offer a cost‐effective and weight‐saving solution for the replacement of metal meshes in structural aircraft composites. Copyright © 2014 John Wiley & Sons, Ltd.     

A novel proton conductor of imidazole-aluminium phosphate hybrids in the solid state

Anhydrous proton transport at temperatures above 100 °C has attracted considerable attention in the development of fuel cells that operate at intermediate temperatures. Liquid-state imidazole (ImH) is known to be a fast anhydrous proton conductor above 100 °C; however, evaporation and severe conductivity drops above and below its melting point (～90 °C), respectively, are major drawbacks to ImH. In this paper, we report a novel solid-state anhydrous ImH-Al(H(2)PO(4))(3) (AlP) hybrid material prepared via a simple synthesis using mechanical milling. This solid-state hybrid exhibits relatively a high ionic conductivity of ～0.1 mS cm(-1) at 100 °C and remarkably a small activation energy of 0.23 eV. In addition, the ImH-AlP hybrid material provides a means of overcoming both temperature-dependent drawbacks to pure ImH: (1) the ImH-AlP hybrid is thermally stable up to 130 °C, and (2) the hybrid material maintains high ionic conductivity below the melting point of ImH.     

以酚醛树脂为碳源原位合成富锂层状相/尖晶石/碳核壳结构正极材料及其电化学性能

通过酚醛树酯包覆和碳热反应在富锂正极材料表面原位构建碳和尖晶石双壳保护结构, 对这种核壳结构的正极材料进行了结构和形貌表征, 并研究了其电化学性能. 研究发现, 尖晶石相为材料提供了三维锂离子迁移通道, 碳包覆层显著提高了正极材料的电子电导率, 两种效应的共同作用极大降低了材料的电化学阻抗, 提升了材料的放电比容量, 这种多壳层结构正极材料还具有优异的倍率性能, 在5C倍率下放电比容量可达到135.1 mA·h/g.     

Thermally conductive cyanate ester nanocomposites filled with graphene nanosheets and multiwalled carbon nanotubes

In this work, dodecylamine‐modified graphene nanosheets (DA‐GNSs) and γ‐aminopropyl‐triethoxysilane‐treated multiwalled carbon nanotubes (f‐MWCNTs) are employed to prepare cyanate ester (CE) thermally conductive composites. By adding 5 wt% DA‐GNSs or f‐MWCNTs to the CE resin, the thermal conductivities of the composites became 3.2 and 2.5 times that of the CE resin, respectively. To further improve the thermal conductivity, a mixture of the two fillers was utilized. A remarkable synergetic effect between the DA‐GNSs and f‐MWCNTs on improving the thermal conductivity of CE resin composites was demonstrated. The composite containing 3 wt% hybrid filler exhibited a 185% increase in thermal conductivity compared with pure CE resin, whereas composites with individual DA‐GNSs and f‐MWCNTs exhibited increases of 158 and 108%, respectively. Moreover, the composite with hybrid filler retained high electrical resistivity. Scanning electron microscopy images of the composite morphologies showed that the modified graphene nanosheets (GNSs) and multiwalled carbon nanotubes (MWCNTs) were uniformly dispersed in the CE matrix, and a number of junction points among MWCNTs and between MWCNTs and GNSs formed in the composites with hybrid fillers. Generally, we can conclude that these composites filled with hybrid fillers may be promising materials of further improving the thermal conductivity of CE composites. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis, characterization and proton transport properties of mixed metal phosphonate-zirconium titanium hydroxy ethylidene diphosphonate

Novel hybrid material, zirconium titanium hydroxy ethylidene diphosphonate (ZTHEDP) of the class of tetravalent bimetallic acid (TBMA) salt was synthesized using sol-gel route. ZTHEDP was characterized for elemental analysis (zirconium, titanium and phosphorus by ICP-AES and carbon and hydrogen by CHN analyzer), spectral analysis (FTIR), thermal analysis (TGA), X-ray diffraction studies and SEM. Chemical resistivity of this material was assessed in various media-acids, bases and organic solvents. The protons present in the structural hydroxyl groups in ZTHEDP indicate good potential to exhibit solid state proton conduction. The proton transport property of ZTHEDP was explored by measuring specific conductance at different temperatures in the range of 303–423 K at 10 K intervals, using Solartron Impedance Analyzer (SI 1260) over a frequency range 1 Hz-32 MHz at a signal level below 1 V. Zirconium hydroxy ethylidene diphosphonate (ZrHEDP) and titanium hydroxy ethylidene diphosphonate (TiHEDP) were also synthesized under identical conditions, characterized and their proton transport properties investigated for comparative studies. It is observed that, in all cases, conductivity decreases with increasing temperature. Conductivity performance of ZTHEDP, ZrHEDP and TiHEDP is discussed based on conductivity data and activation energy. It is observed that, ZTHEDP exhibits enhanced conductance and the mechanism of transportation is proposed to be Grotthuss type.     

Preparation and Properties of Hybrid Silane-crosslinked Sulfonated Poly(aryl ether ketone)s as Proton Exchange Membranes

A series of novel organic-inorganic hybrid proton-conducting electrolyte membranes with silane-crosslinked sulfonated poly(aryl ether ketone)(SC-SPAEK) networks was prepared via a simple procedure that includes solution casting and acid treatment. The organosilicon pendants of the silane-grafted SPAEK, which were expected to serve as coupling and crosslinking agents, were found to play a key role in the homogenous dispersion of inorganic particles and improved the performance of hybrid membranes. The hybrid membranes exhibited enhanced proton conductivity, and SC-SPAEK/TiO2-4 showed an extremely high proton conductivity of 0.1472 S/cm at 100℃. The crosslinked hybrid membranes also demonstrated good chemical resistance, oxidative stability, and mechanical properties. The crosslinked hybrid membranes with excellent comprehensive performance may be a promising material for proton exchange membrane fuel cells.     

Hybrid cathode materials for lithium-sulfur batteries

This review demonstrates the approaches to fabricate hybrid cathode materials for lithium-sulfur batteries. This short review does not claim to cover all recently published data; instead, an effort is aimed to show how the critical issues on carbon – sulfur hybrid are addressed based on selected articles in last couple of years. The influence of porous structure of carbon, the confinement effect of polysulfides in narrow micropores, and importance of hierarchical porosity are explained. Besides, the heteroatom doping on carbon in carbon–sulfur hybrids plays a vital role on improvement of bulk electronic conductivity of electrode. This review presents the twin polymerization strategy for direct preparation of nanoscale intermixed hybrid materials. Finally, the formation of sulfur containing copolymers by reacting sulfur melt with functional vinyl monomers are shown in this review with selected examples postulating the respective potential for future generation energy storage technology from the viewpoint of industrial applications.     

Ball-milling MoS_2/carbon black hybrid material for catalyzing hydrogen evolution reaction in acidic medium

Replacing platinum for catalyzing hydrogen evolution reaction(HER) in acidic medium remains great challenges. Herein, we prepared few-layered Mo S2 by ball milling as an efficient catalyst for HER in acidic medium. The activity of as-prepared Mo S2 had a strong dependence on the ball milling time. Furthermore,Ketjen Black EC 300 J was added into the ball-milled Mo S2 followed by a second ball milling, and the resultant Mo S2/carbon black hybrid material showed a much higher HER activity than Mo S2 and carbon black alone.The enhanced activity of the Mo S2/carbon black hybrid material was attributed to the increased abundance of catalytic edge sites of Mo S2 and excellent electrical coupling to the underlying carbon network.