Nanoparticle-filled capillary electrophoresis for the separation of long DNA molecules in the presence of hydrodynamic and electrokinetic forces

We report the analysis of long DNA molecules by nanoparticle-filled capillary electrophoresis (NFCE) under the influences of hydrodynamic and electrokinetic forces. The gold nanoparticle (GNP)/polymer composites (GNPPs) prepared from GNPs and poly(ethylene oxide) were filled in a capillary to act as separation matrices for DNA separation. The separations of lambda-DNA (0.12-23.1 kbp) and high-molecular-weight DNA markers (8.27-48.5 kbp) by NFCE, under an electric field of -140 V/cm and a hydrodynamic flow velocity of 554 microm/s, were accomplished within 5 min. To further investigate the separation mechanism, the migration of lambda-DNA was monitored in real time using a charge-coupled device (CCD) imaging system. The GNPPs provide greater retardation than do conventional polymer media when they are encountered during the electrophoretic process. The presence of interactions between the GNPPs and the DNA molecules is further supported by the fluorescence quenching of prelabeled lambda-DNA, which occurs through an energy transfer mechanism. Based on the results presented in this study, we suggest that the electric field, hydrodynamic flow, and GNPP concentration are the three main determinants of DNA separation in NFCE.     

Incorporation of guanosine gels into sieving matrices for length- and sequence-based separation of DNA in capillary electrophoresis

Sieving gels are used in capillary gel electrophoresis to resolve DNA strands of different lengths. For complex samples, however, such as those encountered in metagenomic analysis of microbial communities or biofilms, length-based separation may mask the true genetic diversity of the community since different organisms may contribute same-length DNA with different sequences. There is a need, therefore, for DNA separations based on both the length and sequence. Previous work has demonstrated the ability of guanosine gels (G-gels) to separate four single-stranded DNA 76-mers that differ by only a few A/G base substitutions. The goal of the present work is to determine whether G-gels could be combined with commercial sieving gels in order to simultaneously separate DNA based on both length and sequence. The results are given for the four 76-mers and for a standard dsDNA ladder. Commercial sieving gels were used alone and in combination with G-gels. For the 76-mers, the combined medium was less efficient than the G-gel alone but was able to achieve partial resolution. The combined medium was at least as effective as the sieving gel alone at resolving the denatured DNA ladder and showed indications of sequence-based resolution as well, as supported by MALDI-MS. The results show that the combined sieving gel/G-gel medium retains the selectivity of the individual media, providing a promising approach to simultaneous length- and sequence-based DNA separation for metagenomic analysis of complex systems.     

Comparative study of capillary zone electrophoresis and micellar electrokinetic capillary chromatography for the separation of naphthalenedisulfonate isomers

We investigated the separation of a test mixture of nine substituted and unsubstituted naphthalenedisulfonate isomers by capillary electrophoresis with a UV diode array detector. In particular, we focused on how the composition of the running buffer affected the separation selectivity. When capillary zone electrophoresis was carried out, the best results were obtained when organic solvents such as ethanol or propan-2-ol were added. Eight peaks were baseline separated but in no case were all the unsubstituted isomers separated. Therefore, capillary electrophoretic separation of the compounds was examined in the presence of micellar agents, such as sodium dodecyl sulfate, polyethylene glycol dodecyl ether (Brij 35) and cetyltrimethylammonium bromide. All the substituted isomers and two of the unsubstituted isomers were well resolved within 20 min by micellar electrokinetic capillary chromatography when Brij 35 was used as micellar agent. Separations were reproducible, in terms of peak area and migration time, under these conditions.     

Comparative study of capillary zone electrophoresis and micellar electrokinetic chromatography for the separation of twelve aromatic sulphonate compounds

Summary Two modes of capillary electrophoresis (CE), capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC), were investigated for the separation of 12 aromatic sulphonate compounds. In CZE, although the voltage applied, the buffer concentration and the pH were optimized for effective separation of the compounds studied, under the best conditions four of the five amino compounds coeluted, as did naphthalene-1-sulphonic acid and naphthalene-2-sulphonic acid. In MEKC, sodium dodecyl sulphate (SDS) and Brij 35 were chosen as the anionic and nonionic surfactants and the effect of the concentration of micelles was examined. The effect of adding methanol as the organic modifier was also investigated with each of these micellar systems. All the analytes, including the isomers, were completely separated by use of MEKC with Brij 35 but when SDS was used only 11 compounds were separated because two amino compounds coeluted.     

Copolymer solutions as separation media for DNA capillary electrophoresis

Capillary electrophoresis techniques offer high plate numbers and are highly suited for the efficient separations of a wide variety of chemical components in diverse matrices. Because of the small capillary and detection cell dimensions, together with the minute volumes of samples to be injected, sensitive detection schemes based on different physicochemical principles are being developed. One logical approach to increased sensitivity in capillary electrophoresis detection has been the development of chemiluminescence-based detectors. The development of on-line ultrasensitive chemiluminescence detection (referred to the concentration detection limit of nM order of magnitude or mass detection limit of amol order of magnitude) in capillary electrophoresis system is reviewed. The applications and limitations of the current detection methodology are briefly considered and future prospects for the development are discussed.     

A viscosity-tunable polymer for DNA separation by microchip electrophoresis

A thermo-responsive separation matrix, consisting of Pluronic F127 tri-block copolymers of poly(ethylene oxide) and poly(propylene oxide), was used to separate DNA fragments by microchip electrophoresis. At low temperature, the polymer matrix was low in viscosity and allowed rapid loading into a microchannel under low pressure. With increasing temperatures above 25°C, the Pluronic F127 solution forms a liquid crystalline phase consisting of spherical micelles with diameters of 17–19 nm. The solution can be used to separate DNA fragments from 100 bp to 1500 bp on poly(methyl methacrylate) (PMMA) chips. This temperature-sensitive and viscosity-tunable polymer provided excellent resolution over a wide range of DNA sizes. Separation is based on a different mechanism compared with conventional matrices such as methylcellulose. To illustrate the separation mechanism of DNA in a Pluronic F127 solution, DNA molecular imaging was performed by fluorescence microscopy with F127 polymer as the separation matrix in microchip electrophoresis. Figure Temperature dependence of the viscosity of 20% w/w Pluronic F127 solution in 1xTBE buffer. Dotted approximates resultant curve.     

Principles of DNA separation with capillary electrophoresis

During the last decade, capillary electrophoresis (CE) of DNA has undergone rapid development. This improvement was especially important for DNA sequencing, where CE has now become a standard method facilitating to decipher several genomes within a very short time. Here, we give a review of the fundamentals of DNA separation in CE and the major factors influencing the performance.     

Human genomic DNA analysis using a semi-automated sample preparation, amplification, and electrophoresis separation platform

The growing importance of analyzing the human genome to detect hereditary and infectious diseases associated with specific DNA sequences has motivated us to develop automated devices to integrate sample preparation, real-time PCR, and microchannel electrophoresis (MCE). In this report, we present results from an optimized compact system capable of processing a raw sample of blood, extracting the DNA, and performing a multiplexed PCR reaction. Finally, an innovative electrophoretic separation was performed on the post-PCR products using a unique MCE system. The sample preparation system extracted and lysed white blood cells (WBC) from whole blood, producing DNA of sufficient quantity and quality for a polymerase chain reaction (PCR). Separation of multiple amplicons was achieved in a microfabricated channel 30 microm x 100 microm in cross section and 85 mm in length filled with a replaceable methyl cellulose matrix operated under denaturing conditions at 50 degrees C. By incorporating fluorescent-labeled primers in the PCR, the amplicons were identified by a two-color (multiplexed) fluorescence detection system. Two base-pair resolution of single-stranded DNA (PCR products) was achieved. We believe that this integrated system provides a unique solution for DNA analysis.     

Performance of electrokinetic supercharging for high-sensitivity detection of DNA fragments in chip gel electrophoresis

Chip gel electrophoresis was explored for high-sensitivity detection of DNA by combining electrokinetic injection with transient isotachophoresis preconcentration (here named electrokinetic supercharging (EKS)). Low concentrations (0.2 mg/L) of DNA sample could be detected without fluorescence labeling using a conventional UV detector (at 260 nm). On a single-channel microchip, identification of PCR product was performed by exploiting both external and internal calibration methods. The deviation between the two calibration methods was about 3.6%, and the identified DNA fragment size matched with the predicted size of the template DNA. On the cross microchip the EKS preconcentration has also been achieved when changing the injection reservoir differing from the one used previously. The procedure was computer-simulated and the influence of the voltage applied to two-side reservoirs on sample preconcentration and dilution was also discussed.     

The electrokinetic properties of latex particles: comparison of electrophoresis and dielectrophoresis

A comprehensive study of the AC and DC electrokinetic properties of submicrometre latex particles as a function of particle size and suspending medium conductivity and viscosity is presented. Electrophoretic mobility and dielectrophoretic cross-over results were measured for particle diameters ranging from 44 to 2000 nm. The zeta potentials of the particles were calculated from the electrophoretic mobility data for different suspending medium conductivities, using various models, with and without the inclusion of surface conduction. The dielectrophoretic data was analysed to derive values for the Stern layer conductance and zeta potentials.     

Formamide modified polyacrylamide gels for DNA sequencing by capillary gel electrophoresis.

Compressions are occasionally found during the separation of DNA sequencing fragments, particularly in G/C-rich regions and in gels operated at room temperature. Addition of at least 10% formamide to urea/polyacrylamide sequencing gels improves the denaturing capacity of the gel, minimizing compressions. Addition of 20% or more formamide decreases the separation rate, theoretical plate count, and resolution for normally migrating fragments. An optimum concentration of 10% formamide improves resolution of compressed regions without degrading the other characteristics of the gel. Operation of gels at room temperature simplifies the engineering associated with automated sequencers based on capillary gel electrophoresis.     

Resolution of a paradox in the electrophoresis of DNA in agarose gels

A paradox was observed in a previous study of the electrophoresis of linear DNA fragments in agarose gels (D. L. Holmes and N. C. Stellwagen, Electrophoresis 1990, 11, 5-15). The pore size of the agarose matrix was more accurately determined if the root-mean-square radius of gyration was used to measure DNA macromolecular size. However, the Ogston equations were obeyed and other gel parameters such as the apparent fiber radius and fiber volume appeared to be better described if the geometric mean radius was used to measure DNA size. This paradox can be resolved if relative mobilities (with respect to the smallest DNA molecule in the data set) are used to construct the Ferguson plots, instead of absolute mobilities. Using relative mobilities and the root-mean-square radius of gyration, the Ogston equations are obeyed and the pore size of the matrix is consistent with values determined by other methods.     

Alternating current electrokinetic separation and detection of DNA nanoparticles in high-conductance solutions

In biomedical research and diagnostics, it is a significant challenge to directly isolate and identify rare cells and potential biomarkers in blood, plasma and other clinical samples. Additionally, the advent of bionanotechnology is leading to numerous drug delivery approaches that involve encapsulation of drugs and imaging agents within nanoparticles, which now will also have to be identified and separated from blood and plasma. Alternating current (AC) electrokinetic techniques such as dielectrophoresis (DEP) offer a particularly attractive mechanism for the separation of cells and nanoparticles. Unfortunately, present DEP techniques require the dilution of blood/plasma, thus making the technology less suitable for clinical sample preparation. Using array devices with microelectrodes over-coated with porous hydrogel layers, AC electric field conditions have been found which allow the separation of DNA nanoparticles to be achieved under high-conductance (ionic strength) conditions. At AC frequencies in the 3000 Hz to 10,000 Hz range and 10 volts peak-to-peak, the separation of 10-microm polystyrene particles into low field regions, and 60-nm DNA-derivatized nanoparticles and 200-nm nanoparticles into high-field regions was carried out in 149 mM 1xPBS buffer (1.68 S/m). These results may allow AC electrokinetic systems to be developed that can be used with clinically relevant samples under physiological conditions.     

Design of separation length and electric field strength for high-speed DNA electrophoresis

Gel-based DNA separation on microchip will play an important role in future genomic analysis due to its potential for high-efficiency and high-speed. Optimal design of microchip and separation condition is essential to take full advantage of high-speed separation on microchip. Separation length L and electric field strength E, which are crucial for design of microchip system, are focused on in this paper. Simultaneous optimization of L and E was carried out to achieve the most rapid separation. It was shown that the condition of L and E and the shortest separation time is closely related to the shape of resolution Rs surface in a three-dimensional space with axes E, L, and Rs. This surface was investigated, taking sample injection, detector, diffusion, and Joule heating into account. Thermal gradient broadening due to Joule heating helps to produce camber or ridge shape of Rs surface, which is essential for the shortest separation length and separation time. Sample plug length and detection volume should be more carefully controlled in microchip. The property of diffusion coefficient was shown to play a key role in determining Rs surface.     

Preparation of plant DNA for separation by pulsed field gel electrophoresis

A method was developed for the preparation of completely intact plant DNA embedded in agarose, and suitable for restriction enzyme digestion. Digestion with restriction enzyme was carried out according to modified protocols of Anand and Kenwrick et al. The new method of DNA isolation allows the separation of high molecular weight plant DNA by pulsed field gel electrophoresis.     

Using in situ rheology to characterize the microstructure in photopolymerized polyacrylamide gels for DNA electrophoresis

Photopolymerized cross-linked polyacrylamide hydrogels are attractive sieving matrix formulations for DNA electrophoresis owing to their rapid polymerization times and the potential to locally tailor the gel pore structure through spatial variation of illumination intensity. This capability is especially important in microfluidic systems, where photopolymerization allows gel matrices to be precisely positioned within complex microchannel networks. Separation performance is also directly related to the nanoscale gel pore structure, which is in turn strongly influenced by polymerization kinetics. Unfortunately, detailed studies of the interplay among polymerization kinetics, mechanical properties, and structural morphology are lacking in photopolymerized hydrogel systems. In this paper, we address this issue by performing a series of in situ dynamic small-amplitude oscillatory shear measurements during photopolymerization of cross-linked polyacrylamide electrophoresis gels to investigate the relationship between rheology and parameters associated with the gelation environment including UV intensity, monomer and cross-linker composition, and reaction temperature. In general, we find that the storage modulus G' increases with increasing initial monomer concentration, cross-linker concentration, and polymerization temperature. The steady-state value of G', however, exhibits a more complex dependence on UV intensity that varies with gel concentration. A simple model based on rubber elasticity theory is used to obtain estimates of the average gel pore size that are in surprisingly good agreement with corresponding data obtained from analysis of DNA electrophoretic mobility in gels cast under identical polymerization conditions.     

Separation performance of single-stranded DNA electrophoresis in photopolymerized cross-linked polyacrylamide gels

Considerable effort has been directed toward optimizing performance and maximizing throughput in ssDNA electrophoresis because it is a critical analytical step in a variety of genomic assays. Ultimately, it would be desirable to quantitatively determine the achievable level of separation resolution directly from measurements of fundamental physical properties associated with the gel matrix rather than by the trial and error process often employed. Unfortunately, this predictive capability is currently lacking, due in large part to the need for a more detailed understanding of the fundamental parameters governing separation performance (mobility, diffusion, and dispersion). We seek to address this issue by systematically characterizing electrophoretic mobility, diffusion, and dispersion behavior of ssDNA fragments in the 70-1,000 base range in a photopolymerized cross-linked polyacrylamide matrix using a slab gel DNA sequencer. Data are collected for gel concentrations of 6, 9, and 12%T at electric fields ranging from 15 to 40 V/cm, and resolution predictions are compared with corresponding experimentally measured values. The data exhibit a transition from behavior consistent with the Ogston model for small fragments to behavior in agreement with the biased reptation model at larger fragment sizes. Mobility data are also used to estimate the mean gel pore size and compare the predictions of several models.     

基于微芯片电泳的脱氧核糖核酸片段的浓缩和分离

采用超负荷电动供给(electrokinetic supercharging, EKS)预浓缩技术,在微芯片电泳(MCE)上对脱氧核糖核酸（DNA）片段进行浓缩和分离。EKS是集合样品电动进样(EKI)和过渡等速电泳(tITP)的一种在线浓缩方法。研究表明：采用该方法后,在40.5 mm长的单通道芯片上能够实现对低浓度样品的大量进样、浓缩和基线分离。在普通的紫外检测条件(检测波长为260 nm)下,对DNA片段的平均检出限(S/N=3)约为0.07 mg/L,仅为十字芯片上的微芯片电泳检出限的1/40。本文还对浓缩过程中的一些关键因素和定性分析进行了探讨。