Spectrophotometric determination of cationic and anionic surfactants with anionic dyes in the presence of nonionic surfactants,part II: Development of batch and flow injection methods

On the basis of the changes in absorption spectra of azo dyes on the addition of an organic onium ion, spectrophotometric methods for the determination of organic onium salts and anionic surfactants were developed, and applied to flow injection method. Propyl orange (PO^–) was used for the determination of organic onium ions. Pairs of PO^– and Zeph⁺ (tetradecyldimethyl-benzylammonium ion) or PO^– and nC₁₈TMA⁺ (n-octadecyltrimethylammonium ion) were used for the determination of anionic surfactants. The determination range of organic onium ions were (0–3) × 10^–5 M by a batch method and were (0–2) × 10^–5 M by a flow injection method. The determination ranges of anionic surfactants were (0–2) × 10^–5 M by the batch method, and were (0–5) × 10^–5 M by the flow injection method, and the detection limit corresponding toS/N = 3 was 3 × 10^–7 M by the flow injection method. By the proposed flow injection method, anionic surfactants in water samples were determined.     

The effect of high pressure on the ion pair equilibrium constant of alkali metal fluorides: A spectrophotometric study

Bromophenol blue indicator was used in UV-visible spectrophotometric measurements to study ion association constants of alkali metal fluorides. The equilibrium constants for the ion pair formation of the alkali metal fluorides were determined as a function of ionic strength at one atmosphere pressure and 25°C. The effect of pressure on these association constants was measured at a constant total ionic strength of 1.0 mol-kg^–1 over a pressure range of 1 to 2000 atmospheres at 25°C. The pressure dependences of the stoichiometric association constants of the alkali metal fluorides are given by: lnK _LiF ^* =0.77–2.47×10^–4P–2.12×10^–8P²; lnK _NaF ^* =0.53–1.08×10^–4P–1.66×10^–8P²; lnK _KF ^* =0.24–4.41×10^–5P–7.15×10^–8P²; lnK _RbF ^* =–0.17–8.65×10^–5P–4.51×10^–8P²; and lnK _CsF ^* = –0.37–1.14×10^–4P–6.82×10^–8P², where P is the pressure in atmospheres. The stoichiometric molar volume and compressibility changes for ion pair formation of the alkali metal fluorides were evaluated from the pressure dependence of K _MF ^* data. The thermodynamic association constants were also calculated making use of activity coefficient data from the Pitzer equations. The partial molal volume and compressibility changes for ion pair formation of each alkali metal fluoride are reported.     

Interaction of iron carbonyls with Lewis bases

The interaction of iron carbonyls Fe _n (CO) _m (wheren = 1,m = 5;n = 2,m = 9;n = 3,m = 12) with anionic Lewis bases (H^–, F^–, Cl^–, Br^– , I^–, CN^–, SCN^–, N₃ ^–, MeSO₃ ^–, MeCO₂ ^–, CF₃CO₂ ^–, S₂ ^–, CO₃ ^2–, and SO₄ ^2–) passes through two-stage redox-disproportionation. The first stage is the formation of an iron carbonyl-base complex, [Fe _n (CO) _m–1C(O)L]^–, and the second is a single-electron reduction of this complex by another molecule of the initial iron carbonyl, giving rise to Fe(l) and Fe(–l) derivatives.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 248–249, January, 1996.     

Transference numbers for ultra concentrated solutions of aqueous hydrochloric acid at 25°C

Transference numbers of HCl(aq) solutions at 25°C, from 0.01 to 13.6 mol-kg^–1(m) have been obtained by measuring the emf of cells with transference using hydrogen gas/platinum electrodes. Good agreement is obtained at concentrations up to 1 m with all previous data, and our results strongly corroborate those of King and Spiro over the 2–8m concentration range. The transference numbers of the hydronium ion fit the empirical equation, _H ^HCl = 0.821 + 0.0457m ^1/2 – 2.476×10^–2m – 1.90×10^–4 m ² – 1.45×10^–5 m ³ the maximum deviation in T _H ^HCl being 0.003.     

A study of the chemiluminescence behavior of myoglobin with luminol and its analytical applications

A chemiluminescence signal at 425 nm was observed when ferric state myoglobin was mixed with luminol in alkaline medium. Because the signal was remarkably enhanced in the presence of Fe(CN)₆ ^4–, analytical applications were investigated in a flow-injection system. The increase in chemiluminescence was linearly dependent on myoglobin concentration in the range 0.1 to 100 nmol L^–1, and the limit of detection was 0.04 nmol L^–1 with relative standard deviation 3.2% (3). It was also found that binding of Mb with the ligands CN^–, SCN^–, and F^– significantly inhibited the chemiluminescence reaction. The linear dynamic ranges for the ligands were 1.0–300.0, 0.1–3.0, and 0.5–100.0 nmol L^–1, and the limits of detection (S/N=3) 0.4, 0.04, and 0.2 nmol L^–1, for F^–, CN^–, and SCN^–, respectively. The relative standard deviations were 5.32%, 6.13%, and 3.38% for 0.1 nmol L^–1 CN^–, 0.5 nmol L^–1 SCN^–, and 1.0 nmol L^–1 F^–, respectively. At a flow rate of 2.0 mL min^–1 the assay could be accomplished in 1 min, including sampling and washing. The method has been successfully applied to the determination of myoglobin in human urine and F^– in water samples. A possible mechanism of chemiluminescence production by myoglobin and luminol is presented.     

Enhancing effect of DNA on chemiluminescence from the decomposition of hydrogen peroxide catalyzed by copper(II)

In the absence of any special luminescence reagent, emission of weak chemiluminescence has been observed during the decomposition of hydrogen peroxide catalyzed by copper(II) in basic aqueous solution. The intensity of the chemiluminescence was greatly enhanced by addition of DNA and was strongly dependent on DNA concentration. Based on these phenomena, a flow-injection chemiluminescence method was established for determination of DNA. The chemiluminescence intensity was linear with DNA concentration in the range 2×10^–7–1×10^–5 g L^–1 and the detection limit was 4.1×10^–8 g L^–1 (S/N=3). The relative standard deviation was less than 3.0% for 4×10^–7 g L^–1 DNA (n=11). The proposed method was satisfactorily applied for determination of DNA in synthetic samples. The possible mechanism of the CL reaction is discussed.     

Buffer Standards for the Physiological pH of Zwitterionic Compounds,MOBS and TABS from 5 to 55°C

The values of the second dissociation constant, pK₂, and related thermodynamic quantities of 4-(N-morpholino)butanesulfonic acid (MOBS) and N-tris(hydroxymethyl)-4-aminobutanesulfonic acid (TABS) have already been reported over the temperature range 5–55°C including 37{°}C. This paper reports the pH values of twelve equimolal buffer solutions at designated pH (s) with the following compositions: (a) mixtures of MOBS (0.05 mol-kg^–1) + NaMOBS (0.05 mol-kg^–1); (b) MOBS (0.08 mol-kg^–1) + NaMOBS (0.08 mol-kg^–1); (c) MOBS (0.08 mol-kg^–1) + NaMOBS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1); (d) TABS (0.05 mol-kg^–1) + NaTABS (0.05 mol-kg^–1); and (e) TABS (0.08 mol-kg^–1) + NaTABS (0.08 mol-kg^–1); and (f) TABS (0.08 mol-kg^–1) + NaTABS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1). Two buffer solutions have ionic strengths I= 0.05 mol-kg^–1, another two have I=0.08 mol-kg^–1, and the remaining two buffer solutions have I= 0.16 mol-kg^–1, which is close to that of the clinical fluids (blood serum). These buffers have been recommended as a useful pH standard for the measurements of physiological solutions. Conventional pH values of all six buffer solutions from 5–55°C, as well as those obtained from the liquid junction potential correction at 25 and 37{°}C have been calculated. The flowing-junction calomel cell has been utilized to measure E_j, the liquid junction potential.     

Co-hydrolysis products of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions: Part 2 [1]

²⁹Si NMR peaks due to species with the double four-membered ring siloxane backbone composed of both Si(O^–)_4/2 and CH₃Si(O^–)_3/2 units, (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=1–3), formed by co-hydrolysis of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions in methanol have been assigned. It has been found that ²⁹Si NMR peaks due to Si(OSi)₃(O^–) units shift to lower frequencies by replacement of the adjacent Si(O^–)_4/2 units by CH₃Si(O^–)_3/2 units, in other words, with increasing m value in Si[OSi(O^–)₃]_{3 – m} [OSi(CH₃) (O^–)₂] _m (O^–) (m=0–2). Peaks from CH₃ Si(OSi)₃ units in the species have also appeared as separated due to the kind of neighbor structural units. On the basis of the assignments, positions of CH₃Si(O^–)_3/2 units in the cubic octameric siloxane framework of (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=2, 3), for both of which three isomers are present, have been estimated.     

Determination of subnanomolar concentrations of cobalt by adsorptive stripping voltammetry at a bismuth film electrode

Procedures for trace cobalt determinations by adsorptive stripping voltammetry at in situ and ex situ plated bismuth film electrodes are presented. These exploit the enhancement of the cobalt peak obtained by using the Co(II)–dimethylglyoxime–cetyltrimethylammonium bromide–piperazine-N,N-bis(2-ethanesulfonic acid) system. The calibration graph for an accumulation time of 120 s was linear from 2 × 10^–10 to 2 × 10^–8 mol L^–1. The relative standard deviation from five determinations of cobalt at a concentration of 5 × 10^–9 mol L^–1 was 5.2%. The detection limit for an accumulation time of 300 s was 1.8 × 10^–11 mol L^–1. The proposed procedure was applied to cobalt determination in certified reference materials and in tap and river water samples.     

A flow-injection ultrafiltration sampling chemiluminescence system for on-line determination of drug–protein interaction

A flow-injection ultrafiltration sampling chemiluminescence system for on-line determination of cimetidine–bovine serum albumin (BSA) interaction is proposed in this paper. Cimetidine can be oxidized by N-bromosuccinimide (NBS) and sensitized by fluorescein to produce high chemiluminescence emission in basic media. The concentration of cimetidine is linear with the CL intensity in the range 3×10^–7–1×10^–4 mol L^–1 with a detection limit of 1×10^–7 mol L^–1 (3). The drug and protein were mixed in different molar ratios in 0.067 mol L^–1 phosphate buffer, pH 7.4, and incubated at 37 °C in a water bath. The ultrafiltration probe was utilized to sample the mixed solution at a flow rate of 5 µL min^–1. The data obtained by the proposed ultrafiltration flow-injection chemiluminescence method was analyzed with Scrathard analysis and a Klotz plot. The estimated association constant (K) and the number of the binding site (n) on one molecule of BSA by Scrathard analysis and Klotz plot were 3.15×10⁴ L mol^–1 and 0.95, 3.25×10⁴ L mol^–1 and 0.92, respectively. The proposed system proved that flow-injection chemiluminescence analysis coupled with on-line ultrafiltration sampling is a simple and reliable technique for the study of drug–protein interaction.     

Der Einfluß großer Salzkonzentrationen auf die Oxydationsreaktion von Fe(phen) 3 2+ mit Ce(IV) in Schwefelsäure

The influence of NaClO₄, NaCl and Na₂SO₄ on the oxidation of Fe(phen) ₃ ²⁺ by Ce(IV) was investigated by means of the stopped-flow method. At the concentrations range of NaClO₄ and NaCl 0.1–1.0M the rate constant values decrease from 1.03·10⁵ to 0.56·10⁵M^–1s^–1 and from 1.08·10⁵ to 0.81·10⁵M^–1s^–1 respectively.In varying concentrations of Na₂SO₄ solutions (0.05–0.35M) the rate constant values decrease from 1.05·10⁵M^–1s^–1 to 0.45·10⁵M^–1s^–1.Taking into account the negative salt effect the mechanism of the reaction progress is proposed.

     

Energy levels and crystal-field calculations of trivalent ytterbium in yttrium aluminum garnet and yttrium gallium garnet

The splitting of the two ² F states of Yb³⁺:YAlG and Yb³⁺:YGaG, have been determined from fluorescence and absorption spectra at low temperatures. The levels of the ground states of Yb³⁺: YAlG are at: 0, 388, 613, 778 cm^–1, those of Yb³⁺: YGaG at 0, 308, 567, and 672 cm^–1. Crystal field calculations yield the following values for Yb³⁺:YAlG; A ₂ ⁰ =270 cm^–1, A ₄ ⁰ =–165 cm^–1, A ₄ ⁴ =–1155 cm^–1, A ₀ ⁶ =21 cm^–1, A ₄ ⁶ =–304 cm^–1 and for Yb³⁺:YGaG: A ₀ ² =110 cm^–1, A ₀ ⁴ =–125 cm^–1, A ₄ ⁴ =–1250 cm^–1, A ₀ ⁶ =10 cm^–1 and A ₄ ⁶ =–142 ^–1 A satisfactory agreement has been found for calculated and observed splitting patterns.

---

Zusammenfassung Die Aufspaltung der ² F-Zustände von Yb³⁺:YAlG(I) und Yb³⁺:YGaG (II) wurde bei tiefen Temperaturen aus Fluoreszenz- und Absorptionsspektren bestimmt. Die Niveaus des Grundzustandes von (I) liegen bei 0, 388, 613, 778 ^–1, die von (II) bei 0, 308, 567 und 672 ^–1. Die Ligandenfeldtheorie ergibt folgende Werte für die Kristallfeldparameter: für (I) A ₂ ⁰ =270 cm^–1, A ₄ ⁰ =–165 cm^–1, A ₄ ⁴ =–1155 cm^–1, A ₀ ⁶ =21 cm^–1, A ₄ ⁶ =–304 cm^–1 unf für (II) A ₀ ² =110 cm^–1, A ₀ ⁴ =–125 cm^–1, A ₄ ⁴ =–1250 cm^–1, A=10 cm^–1 and A ₄ ⁶ =–142 ^–1. Die Übereinstimmung zwischen berechneter und beobachteter Aufspaltung war befriedigend.

---

Résumé La division, par le champ de ligandes, des états ² F _7/2 et ² F _5/2 dans Yb³⁺:YAlG et Yb³⁺:YGaG a été déterminée des spectres de fluorescence et d'absorption. Les sous-niveaux de l'état fordamental se situent à 0, 388, 613, 778 cm^–1 dans Yb³⁺:YAlG, à 0, 308, 567, 672 cm^–1 Yb³⁺: YGaG. Le calcul fournit les valeurs suivantes pour les paramètres: Yb³⁺: YAlG A ₂ ⁰ =270 cm^–1, A ₄ ⁰ =–165 cm^–1, A ₄ ⁴ =–1155 cm^–1, A ₀ ⁶ =21 cm^–1, A ₄ ⁶ = -304 cm^–1 Yb³⁺:YGaG: A ₀ ² =110 cm^–1, A ₀ ⁴ =–125 cm^–1, A ₄ ⁴ =–1250 cm^–1, A ₀ ⁶ =10 cm^–1 et A ₄ ⁶ =–142 ^–1. L'accord entre les spectres calculé et observé est satisfaisant.

     

Thermodynamics and Kinetics of Reaction of (Oxo)(hydroxo)molybdenumtetraphenylporphyrin with Pyridine

The reaction of meso-tetraphenylporphyrin with Mo(VI) oxide in boiling phenol resulted in a stable complex O=Mo(OH)TPP. Thermodynamics and kinetics of the reaction between (oxo)(hydroxo)molybdenumtetraphenyporphyrin with pyridine in toluene were studied by spectrophotometric method. This reaction was found to occur in three equilibrium elementary stages: replacement of OH^– by Py (K ₁=9.1 × 10³ l/mol, k ₁=5.25 s^–1 mol^–1 l), the formation of dication (dipyridine)(hydroxo)molybdenumtetraphenylporphyrin as a result of cleavage of a double bond Mo=O (K ²=39.3 l/mol, k ₂=1.83 × 10^–2 s^-1 mol^–1 l), and the formation of cationic complex[Mo(Py)₃TPP]³⁺ · 3OH^– (K ₃=1.0 l/mol, k ₃=1.19 × 10^–3 s^–1 mol^–1 l).__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 5, 2005, pp. 380–386.Original Russian Text Copyright © 2005 by Tipugina, Lomova, Motorina.     

Polarographic behaviour of 2-benzilidenimino-benzohydroxamic acid (2-BIBH) and 2-BIBH-Mo(VI) system

The polarographic behaviour of 2-benzilideniminobenzohydroxamic acid (2-BIBH) solutions and of 2-BIBH solutions in the presence of Mo(VI) have been studied by using differential pulse polarography and cyclic voltammetry. The polarographic characteristics of the resulting waves have been studied and possible mechanisms of the processes involved have been proposed. A linear relationship has been observed betweenI _p and Mo(VI) concentration in the range 2×10^–6 to 1.6×10^–5 M when using 3×10^–4 M 2-BIBH. Standard deviations of 5.6×10^–8 and 1.2×10^–8 M were found for 3×10^–6 and 8 × 10^–6 M Mo(VI), respectively.     

Electrokinetic properties of mixed solutions of dodecyldimethylamine oxide and sodium dodecyl sulfate: specific adsorption effects of small ions

Electrophoretic light-scattering measurements and potentiometric titrations were carried out on aqueous mixtures of dodecyldimethylamine oxide and sodium dodecyl sulfate. The electrophoretic mobility and the surface charge density of the micelles were always negative, ranging from –2.5 to –3.1×10^–4 cm²V^–1s^–1, and –0.033 to –0.045 cm^–2, respectively, for all surfactant mixing ratios, indicating the specific adsorption of Cl^–, in addition to Na⁺, on micelles. The solution pH, as well as the aggregation number previously reported, displayed maxima at intermediate surfactant mole fractions, that is, the non-ideal behavior. The fractional adsorption of Na⁺ per surfactant molecule in the micelles increased gradually with mixing fraction up to 0.82 atX=[SDS]/([SDS]+[C₁₂DAO])=1, while that of Cl^– decreased from 0.25 atX=0 to zero atX>0.4.     

Diels-Alder reaction volumes in the solid state and solution

The densities of anthracene, tetracyanoethylene, maleic anhydride, N-phenylmaleineimide, trans, trans-1,4-diphenylbuta-1,3-diene, and their Diels-Alder adducts were measured in the solid state and in solution at 25 °C. The reaction volumes in the solid state were calculated from the difference in molar volumes. They turned out to be low, close to each other (–4 to –11 cm³ mol^–1), and slightly different from the reaction volumes (–8±1 cm³ mol^–1) calculated from the van der Waals radii. The reaction volumes in solutions (–15 to –32 cm³ mol^–1) were found from the difference in partial molar volumes of the reactants in dioxane, acetonitrile, and 1,2-dichloroethane, The experimental Diels-Alder reaction volumes in solution are determined not only by the formation of new bonds in an adduct: a considerably higher contribution (to 75%) is made by a change in the volume of intermolecular empty spaces in solution on going from reactants to adducts.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2386–2390, November, 2004.     

Thermodynamics of tri- and pentabromide anions in aqueous solution

Formation constants for the tribromide and pentabromide anions were measured by a vapor partitioning method from 5 to 80°C. The molal thermodynamic parameters for these respective species at 25°C are: K ₃ –16.73, H ^o =–5.90 kJ-mol ^–1 , Cp ^o =–29 J-K ^–1 -mol ^–1 , and S ^o =3.6 J-K ^–1 -mol ^–1 ; K ₅ =37.7, H ^o =–13.0 kJ-mol ^–1 , S ^o =–13.6 J-K ^–1 -mol ^–1 , with Cp ^o assumed zero. These results are used to reevaluate published emf results for the bromine/bromide couple.     

Micro-pumping flow system for spectrophotometric determination of anionic surfactants in water

A novel procedure has been developed for spectrophotometric determination of anionic surfactants in water using a solenoid micro-pump as fluid-propulsion device. The proposed method is based on substitution of methyl orange (MO) by anionic surfactants in the formation of an ion-pair with the cetyl pyridine ion (CPC⁺) at pH 5.0. The flow network comprised four solenoid micro-pumps which, under microcomputer control, enabled sample and reagent introduction, and homogenisation in the reaction zone. The system is flexible and simple to operate and control, and sensitive and precise. The analytical plot for the anionic surfactant was linear between 1.43×10^–6 and 1.43×10^–5 mol L^–1 (0.5 to 5.0 mg L^–1; R=0.997, n=5). The relative standard deviation was 0.8% (n=11) for a sample containing 5.74×10^–6 mol L^–1 (2 mg L^–1) surfactant. The limit of detection was 9.76×10^–8 mol L^–1 (0.034 mg L^–1) and the sampling throughput was 60 determinations per hour. The results obtained for washing-water samples were comparable with those obtained by use of the reference method, and no significant differences at the 95% confidence level were observed.     

Tetrachloroferrate(III)-selective liquid membrane electrode based on crystal violet

An extract of crystal violet-tetrachloroferrate(III) in nitrobenzene was used to prepare a tetrachloroferrate(III)-selective liquid membrane electrode with a poly(vinyl chloride) support. The optimal conditions to determine 2.5 × 10^–5 – 5.0 × 10^–2 M iron(III) as tetrachloroferrate(III) (anionic slope 56 mV/decade, detection limit 7.9 × 10^–6 M) were found to be 4.0–5.5.M total chloride in 0.75–1.5M hydrochloric acid. The electrode was reliably applied to determine iron in human blood, haematite and mineralized vitamin syrup by direct potentiometry, standard and sample additions as well as standard subtraction techniques.     

Versuche über den spektrographischen Nachweis kleinster Substanzmengen

Zusammenfassung Je nach dem nachzuweisenden Element konnten im Abreißbogen und Funken noch Substanzmengen von der Größenordnung 10^–9 bis 10^–11 g nachgewiesen werden, und die erreichten Empfindlichkeiten betrugen im Funken: 10^–10 g Cd, 10^–10 g Mn, 10^–8 Tl, 10^–7 g Te, 10^–7 g As, 10^–9 g Li, 10^–11 g Sr, im Abreißbogen: 10^–10 g Cd, 10^–8 g Mn,^–9 g Te, 10^–9 g Tl. Diese mit den hier verwendeten Anordnungen erreichten Empfindlichkeiten können mit den Mitteln der heutigen Experimentiertechnik sicher noch auf dem diskutierten Wege gesteigert werden.