聚电解质PSS/PDDA分子沉积膜表面性能研究

PSS PDDAMD膜紫外 可见吸光度与层数呈线性关系 ,其延长线基本为零证实了是一单分子层层状沉积过程 ;利用接触角测量仪跟踪MD膜沉积过程 ,其结果表明 ,层数较少时PSS PDDAMD膜表面润湿性呈“奇 偶”性规律变化 ,层数较多时规律性不明显 ,这说明聚电解质MD膜结构缺陷随着层数的增加有增大趋势 ;通过对原子力显微镜 (AFM)测定结果的分析 ,进一步证实了多层PSS PDDAMD膜存在结构缺陷 .     

聚电解质PDDA/PSS层层自组装膜的渗透汽化性能

采用聚电解质层层自组装(LbL)技术, 在不同盐浓度下制备了聚(二烯丙基二甲基氯化铵)/聚苯乙烯磺酸钠(PDDA/PSS) 多层自组装膜, 并用于渗透汽化性能的研究. 重点考察了组装溶液中NaCl的浓度、组装层数及操作温度对自组装膜的异丙醇脱水性能的影响. 同时, 用扫描电镜观测了不同条件下制备膜的表面形貌. 结果表明, 在高NaCl含量的聚电解质溶液中只需组装几个双层的LbL膜, 即能获得较高的分离因子和较大的通量, 并解释了该LbL膜呈现反“trade-off”现象的原因.     

功能性超薄有序分子沉积膜的制备及其结构研究

1991年G.Decher等首次探讨了阴阳离子与聚电解质交替沉积制备有机超薄膜的方法。我们在完善成膜技术和发展成膜基质的基础上,详细研究了其成膜过程与膜的结构,并定义这种新的自组装超薄有序膜为分子沉积膜——MD膜。MD膜是利用阴阳离子的静电吸附反应特性,通过相反离子体系的交替分子沉积制备的层状有序自组装多层超薄膜。需要指出的是,分子沉积既是有机超薄膜的制备技术,本身又是一种自组装超薄有序膜。MD膜制备工艺简单,热稳定性和长期稳定性好,不受基体形状与面积限制。     

溶液中聚电解质分子内激态缔合体的形成

采用荧光分光光度法,实验测定了聚苯乙烯磺酸钠在无盐和有盐的水溶液中,单体和激态缔合体的荧光发射光谱.结果表明:激态缔合体单体发射强度比I_E/I_M随外加盐种类、浓度和价态而变化.在相同盐浓度下,各体系的I_E/I_M次序为:KCl>NaCl>LiCl和CaCl_2>MgCl_2。 也研究了NaCl水溶液中聚电解质分子的荧光猝灭.结果表明:随外加盐浓度逐渐增大,聚电解质分子由类棒状向无规线团状转化,该状态有利于激态缔合体的形成.     

链状Silicalite-1分子筛的合成

在传统的合成体系中, 加入聚电解质聚二烯丙基二甲基胺盐酸盐(PDDA)自组装合成链状的Silicalite-1分子筛材料, 考察了PDDA的加入对产物的影响, 并对其进行了XRD和SEM表征.     

PSS/PDDA自组装膜形成过程中的临界浓度效应

Decher等提出的阴阳聚电解质层层组装膜技术(LbL),方便快捷,结构有序,其纳米级可控,可用于生物传感器、杂多酸多层膜修饰电极及天然多糖类功能膜等领域．LbL膜的厚度直接影响其性能,而膜厚度与紫外吸光度(A)成正比．故A是通常用于评价膜厚度的一种简便方法．紫外吸光度与聚电解质溶液浓度(cp)往往呈递增关系,随着溶液中cp的增大,单位面积上吸附聚电解质的量也增加。     

聚电解质溶液中2.6-ANS探针的荧光谱研究

本文合成了2.6—ANS荧光探针分子,并在含有不同外加盐的NaPSS溶液中测定了探针的荧光发射光谱。结果表明:探针的荧光强度随Cs增大而增大,而探针光谱的最大发射波长和半波宽度随Cs增大而减小。当Cs达到一定值时,荧光谱参数与Cs关系曲线出现转折点,此时聚离了链以“类胶束”状态存在。     

癸基硫酸钠和癸烷磺酸钠与阳离子聚电解质相互作用的差别

 通过表面张力及荧光探针方法, 研究了癸基硫酸钠和癸烷磺酸钠与阳离子聚电解质聚二甲基二烯丙基氯化铵(PDMDAAC)的相互作用. 结果表明, 虽然单一癸基硫酸钠和癸烷磺酸钠性质非常相似, 但它们与PDMDAAC的相互作用有明显差别, 癸基硫酸盐与PDMDAAC的相互作用明显强于癸烷磺酸盐. 通过量子化学计算结果对本文实验观测结果进行了解释.     

马来酸与二甲基烯两基胺共聚合成结构规整的聚两性电解质的研究

研究了马来酸与二甲基烯丙基胺共聚物的组成及其交替共聚机理。对共聚物等电点、絮凝性能测定结果表明，该共聚物具聚两性电解质的特性。通过红外光谱及差热分析，探讨了共聚物的微观结构。     

Synthesis and Application of Poly(diallyldimethylammonium tribromide)as a Novel Polymeric Brominating Agent

In this study, the synthesis and applications of a new supported tribromide reagent based on poly(diallyldimethylammonium chloride) is reported. This supported tribromide is used in α‐bromoacetalization of ketones, bromination of alkenes and regioselective bromination of activated aromatic compounds. This method is mild and no Br₂ and HBr were used. Other advantages of this reagent are stability, high efficiency, simple filtera‐ bility and reusability.     

In situ ATR-FTIR and SFM Studies on the Influence of Adsorption time on Deposition and Nanostructure of Poly(ethyleneimine)/Poly(acrylic acid) Multilayers

Summary: The deposition and the nanostructure of polyelectrolyte multilayers (PEM) of branched poly(ethyleneimine)/poly(acrylic acid) (PEI/PAC) was studied in dependence of the adsorption time (t_ADS) of the individual steps. PEM were reproducibly deposited applying up to z = 20 adsorption steps at the fixed pH combination of 10/4 and polyelectrolyte concentration c_PEL = 0.005 M in a flow cell using an automated valve system. in situ ATR-FTIR spectroscopy and SFM were used for quantitative determination of deposited amount and thickness, respectively. A linear relation between PEL band integrals and thickness of thin PEM films was found. Varying t_ADS from 0.5 to 5 min in each of the adsorption steps resulted in a steep rise of the deposited PEM amount. For t_ADS > 5 min the deposition did only marginally increase. Evidence for the release of outermost located PEI upon PAC immersion (even step) and of outermost PAC upon PEI immersion (odd step) was obtained. SFM images on consecutively deposited PEM-6 showed a slight increase in structure size and roughness for increasing t_ADS. These studies help to prepare polyelectrolyte based films with controlled thickness for the interaction with biofluids in the biomedical and food field.     

Thermal Degradation and Kinetics of Poly(3-hydroxybutyrate)/Organoclay Nanocomposites

Poly(3-hydroxybutyrate)/Cloisite30B (PHB/30B) nanocomposites were prepared by solution-intercalation method. The influence of 30B content on the thermal stability of PHB was investigated. With the addition of 3 wt. % of 30B the highest thermal stability of PHB was achieved. The kinetic analysis of the non-isothermal degradation was performed using the isoconversional Friedman method and invariant kinetic parameters method.     

Poly(diallyldimethylammonium chloride) as an Efficient Phase Transfer Catalyst in Solvent‐Free Reduction of Carbonyl Compounds with NaBH4

Poly(diallyldimethylammonium chloride) resin was used as an efficient polymeric phase transfer catalyst, which catalyzed the chemoselective reduction of aldehydes and ketones by NaBH₄ to give the corresponding alcohols in high yields under solvent-free conditions.     

聚亚苯基苯并二噁唑缩聚反应动力学

以4,6-二氨基间苯二酚磷酸盐(DAR.2HP3O4)和对苯二甲酸(TA)为原料经非均相逐步缩聚反应制得聚亚苯基苯并二噁唑(PBO)。该反应可分为溶解控制(齐聚合)、反应动力学控制(预聚合)以及高分子链段扩散控制(后聚合)3个阶段。探讨了各阶段的反应过程,并对PBO预聚合反应动力学进行了研究。结果表明:其动力学符合不可逆二级反应机理,反应活化能为51.9 kJ/mol。     

聚丙烯酸/聚丙烯酰胺水溶液复合特性的研究

通过酸度、电导率、粘度、接触角的测定,研究了聚丙烯酸 (PAA) /聚丙烯酰胺 (PAM) 水溶液复合物及复合物膜的结构和性能。结果表明,酸度、温度、浓度和复合比影响PAA/PAM的复合水溶液中大分子链的构象和流体力学体积,适度的氢键作用可以形成均相的复合溶液。经过热处理和未经热处理的聚合物膜表现出了不同的亲水性能。     

APS引发制备高分子量PDMDAAC

以已知杂质种类和含量的一步法工业二甲基二烯丙基氯化铵(DMDAAC)单体水溶液为原料,用过硫酸铵(APS)为引发剂,采取低温一次性加入引发剂,分阶段升温方式进行聚合反应,通过合成工艺的优化方法,得到了最高特性黏数值为3.17 dL/g的聚二甲基二烯丙基氯化铵(PDMDAAC),单体转化率为94.8%,采用NMR、IR光谱测试技术对产物进行了结构表征。分别考察了DMDAAC质量分数为57.5%~70.0%、APS与DMDAAC质量比为0.15∶100~0.40∶100、Na4EDTA与DMDAAC质量比为0~0.014 2∶100、聚合反应引发温度T1在40~50℃、聚合反应熟化温度T3在50~90℃范围内的以上5个因素对产物特性黏数和单体转化率的影响规律。结果表明,DMDAAC质量分数为65.0%、APS与DMDAAC质量比为0.35∶100、Na4EDTA与DMDAAC质量比为0.007 1∶100、T1为46℃、T2为50℃,T3为70℃,各反应3 h为最佳工艺条件。     

聚对苯二甲酰十碳二胺的制备和非等温结晶动力学研究

以对苯二甲酸和癸二胺为原料,经成盐,预聚合和固相聚合三个步骤合成了新型长碳链和较高相对分子质量的半芳香尼龙聚对苯二甲酰十碳二胺,由红外光谱和核磁共振对其结构进行了确认。用DSC方法研究了聚对苯二甲酰十碳二胺的非等温结晶动力学,用莫志深提出的R～f法对非等温结晶动力学进行了分析,由R～t法得到α值在0.70～0．81之间。利用Kissinger方法求得了半芳香尼龙的非等温结晶活化能,△E=-297．08kJ／mol。     

Properties of Poly(sodium 4‐styrenesulfonate)‐Ionic Liquid Composite Film and Its Application in the Determination of Trace Metals Combined with Bismuth Film Electrode

A new kind of bismuth film modified electrode to sensitively detect trace metal ions based on incorporating highly conductive ionic liquids 1‐butyl‐3‐methyl‐imidazolium hexafluorophosphate (BMIMPF₆) in solid matrices at glassy carbon (GC) was investigated. Poly(sodium 4‐styrenesulfonate) (PSS), silica, and Nafion were selected as the solid matrices. The electrochemical properties of the mixed films modified GC were evaluated. The electron transfer rate of Fe(CN)₆^4?/Fe(CN)₆^3? can be effectively improved at the PSS‐BMIMPF₆ modified GC. The bismuth modified PSS‐BMIMPF₆ composite film electrodes (GC/PSS‐BMIMPF₆/BiFEs) displayed high mechanical stability and sensitive stripping voltammetric performances for the determination of trace metal cations. The GC/PSS‐BMIMPF₆/BiFE exhibited well linear response to both Cd(II) and Pb(II) over a concentration range from 1.0 to 50 μg L^?1. And the detection limits were 0.07 μg L^?1 for Cd(II) and 0.09 μg L^?1 for Pb(II) based on three times the standard deviation of the baseline with a preconcentration time of 120 s, respectively. Finally, the GC/PSS‐BMIMPF₆/BiFEs were successfully applied to the determination of Cd(II) and Pb(II) in real sample, and the results of present method agreed well with those of atomic absorption spectroscopy.     

羧化聚苯醚／聚（苯乙烯—乙烯吡啶）共混相容性

用ＤＳＣ、ＤＭＡ研究了羧化聚苯醚（ＣＰＰＯ）／聚（苯乙烯－乙烯吡啶）（ＰＳＶＰ）共混体系的相容性，结果表明，与ＣＰＰＯ／ＰＳ体系相比，乙烯吡啶基的引入大大提高了共混相容性．这主要是由于ＣＰＰＯ中的羧基与ＰＳＶＰ中的吡啶基之间通过质子转移形成的正负离子间的相互作用，推动了两组分分子的均匀混合．