Polychloride Monoanions from [Cl3]− to [Cl9]−: A Raman Spectroscopic and Quantum Chemical Investigation

Polychloride monoanions stabilized by quaternary ammonium salts are investigated using Raman spectroscopy and state‐of‐the‐art quantum‐chemical calculations. A regular V‐shaped pentachloride is characterized for the [N(Me)₄][Cl₅] salt, whereas a hockey‐stick‐like structure is tentatively assigned for [N(Et)₄][Cl₂???Cl₃^?]. Increasing the size of the cation to the quaternary ammonium salts [NPr₄]⁺ and [NBu₄]⁺ leads to the formation of the [Cl₃]^? anion. The latter is found to be a pale yellow liquid at about 40 °C, whereas all the other compounds exist as powders. Further to these observations, the novel [Cl₉]^? anion is characterized by low‐temperature Raman spectroscopy in conjunction with quantum‐chemical calculations.     

Ionic Liquids as Unique Solvents in One‐Pot Synthesis of 4‐(N,2,2,2‐Tetranitroethylamino)‐3‐R‐Furazans

An efficient two‐step one‐pot protocol for the synthesis of N‐nitrated trinitroethylamino furazans in an ionic liquid has been developed involving the condensation of aminofurazans with trinitroethanol and the N‐nitration of an intermediate Mannich base. Trinitroethylnitramino derivatives have been synthesized and characterized by multinuclear NMR spectroscopy and X‐ray crystallography. A role of the N,2,2,2‐tetranitroethylamino group for stabilization of the high‐density crystal‐packing motif is described. The performance calculations gave detonation pressures and velocities for the furazan derivatives in a range of about 31–36 GPa and 8330–8745 ms^?1, respectively, which makes them competitive energetic materials. Furthermore, due to the positive oxygen balance, the compounds could be potential oxidizers for energetic formulations.     

X‐ray Photoelectron Spectroscopy of Pyridinium‐Based Ionic Liquids: Comparison to Imidazolium‐ and Pyrrolidinium‐Based Analogues

We investigate eight 1‐alkylpyridinium‐based ionic liquids of the form [C_nPy][A] by using X‐ray photoelectron spectroscopy (XPS). The electronic environment of each element of the ionic liquids is analyzed. In particular, a reliable fitting model is developed for the C 1s region that applies to each of the ionic liquids. This model allows the accurate charge correction of binding energies and the determination of reliable and reproducible binding energies for each ionic liquid. Shake‐up/off phenomena are determinedfor both C 1s and N 1s spectra. The electronic interaction between cations and anions is investigated for both simple ionic liquids and an example of an ionic‐liquid mixture; the effect of the anion on the electronic environment of the cation is also explored. Throughout the study, a detailed comparison is made between [C₈Py][A] and analogues including 1‐octyl‐1‐methylpyrrolidinium‐ ([C₈C₁Pyrr][A]), and 1‐octyl‐3‐methylimidazolium‐ ([C₈C₁Im][A]) based samples, where X is common to all ionic liquids.     

Disupersilylperoxo Radical Anion [tBu3SiOOSitBu3]⋅−: An Intermediate of Supersilanide Oxidation

In the oxidative process of the supersilanide anion [SitBu₃]^?, radical species are generated. The continuous wave (cw)‐EPR spectrum of the reaction solution of Na[SitBu₃] with O₂ revealed a signal, which could be characterized as disupersilylperoxo radical anion [tBu₃SiOOSitBu₃]^?? affected by sodium ions though ion‐pair formation. A mechanism is suggested for the oxidative process of supersilanide, which in a further step can be helpful in a better understanding of the oxidation process of isoelectronic phosphanes.     

Physical Vapor Deposition of [EMIM][Tf2N]: A New Approach to the Modification of Surface Properties with Ultrathin Ionic Liquid Films

Ultrathin films of the ionic liquid (IL) 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][Tf₂N], are prepared on a glass substrate by means of an in situ thermal‐evaporation/condensation process under ultrahigh‐vacuum conditions. By using X‐ray photoelectron spectroscopy (XPS), it is demonstrated that the first layer of the IL film grows two dimensionally, followed by the three‐dimensional growth of successive layers. The first molecular layer consists of a bilayer, with the [EMIM]⁺ cations in contact to the surface and the [Tf₂N]^? anions at the vacuum side. The ultrathin IL films are found to be stable under ambient conditions.     

Tunable Aryl Alkyl Ionic Liquids with Weakly Coordinating Tetrakis((1,1,1,3,3,3‐hexafluoropropan‐2‐yl)oxy)borate [B(hfip)4] Anions

Weakly coordinating borate or aluminate anions have recently been shown to yield interesting properties of the resulting ionic liquids (ILs). The same is true for large phenyl‐substituted imidazolium cations, which can be tuned by the choice, position, or number of substituents on the aromatic ring. We were therefore interested to combine these aryl alkyl imidazolium cations with the weakly coordinating tetrakis((1,1,1,3,3,3‐hexafluoropropan‐2‐yl)oxy)borate [B(hfip)₄]^? anions to study the physical properties and viscosities of these ionic liquids. Despite the large size and high molecular weight of these readily available ILs, they are liquid at room temperature and show remarkably low glass transition points and relatively high decomposition temperatures.     

Characterization of a Novel Intrinsic Luminescent Room‐Temperature Ionic Liquid Based on [P6,6,6,14][ANS]

Intrinsically luminescent room‐temperature ionic liquids (RTILs) can be prepared by combining a luminescent anion (more common) or cation with appropriate counter ions, rendering new luminescent soft materials. These RTILs are still new, and many of their photochemical properties are not well known. A novel intrinsic luminescent RTIL based on the 8‐anilinonaphthalene‐1‐sulfonate ([ANS]) anion combined with the trihexyltetradecylphosphonium ([P_6,6,6,14]) cation was prepared and characterized by spectroscopic techniques. Detailed photophysical studies highlight the influence of the ionic liquid environment on the ANS fluorescence, which together with rheological and ¹H NMR experiments illustrate the effects of both the viscosity and electrostatic interactions between the ions. This material is liquid at room temperature and possesses a glass transition temperature (T_g) of 230.4 K. The fluorescence is not highly sensitive to factors such as temperature, but owing to its high viscosity, dynamic Stokes shift measurements reveal very slow components for the IL relaxation.     

Silver–Ethene Complexes [Ag(η2‐C2H4)n][Al(ORF)4] with n=1, 2, 3 (RF=Fluorine‐Substituted Group)

Compounds including the free or coordinated gas‐phase cations [Ag(η²‐C₂H₄)_n]⁺ (n=1–3) were stabilized with very weakly coordinating anions [A]^? (A=Al{OC(CH₃)(CF₃)₂}₄, n=1 ( 1 ); Al{OC(H)(CF₃)₂}₄, n=2 ( 3 ); Al{OC(CF₃)₃}₄, n=3 ( 5 ); {(F₃C)₃CO}₃Al‐F‐Al{OC(CF₃)₃}₃, n=3 ( 6 )). They were prepared by reaction of the respective silver(I) salts with stoichiometric amounts of ethene in CH₂Cl₂ solution. As a reference we also prepared the isobutene complex [(Me₂C?CH₂)Ag(Al{OC(CH₃)(CF₃)₂}₄)] ( 2 ). The compounds were characterized by multinuclear solution‐NMR, solid‐state MAS‐NMR, IR and Raman spectroscopy as well as by their single crystal X‐ray structures. MAS‐NMR spectroscopy shows that the [Ag(η²‐C₂H₄)₃]⁺ cation in its [Al{OC(CF₃)₃}₄]^? salt exhibits time‐averaged D_3h‐symmetry and freely rotates around its principal z‐axis in the solid state. All routine X‐ray structures (2θ_max.<55°) converged within the 3σ limit at C?C double bond lengths that were shorter or similar to that of free ethene. In contrast, the respective Raman active C?C stretching modes indicated red‐shifts of 38 to 45 cm^?1, suggesting a slight C?C bond elongation. This mismatch is owed to residual librational motion at 100 K, the temperature of the data collection, as well as the lack of high angular data owing to the anisotropic electron distribution in the ethene molecule. Therefore, a method for the extraction of the C?C distance in [M(C₂H₄)] complexes from experimental Raman data was developed and meaningful C?C distances were obtained. These spectroscopic C?C distances compare well to newly collected X‐ray data obtained at high resolution (2θ_max.=100°) and low temperature (100 K). To complement the experimental data as well as to obtain further insight into bond formation, the complexes with up to three ligands were studied theoretically. The calculations were performed with DFT (BP86/TZVPP, PBE0/TZVPP), MP2/TZVPP and partly CCSD(T)/AUG‐cc‐pVTZ methods. In most cases several isomers were considered. Additionally, [M(C₂H₄)₃] (M=Cu⁺, Ag⁺, Au⁺, Ni⁰, Pd⁰, Pt⁰, Na⁺) were investigated with AIM theory to substantiate the preference for a planar conformation and to estimate the importance of σ donation and π back donation. Comparing the group 10 and 11 analogues, we find that the lack of π back bonding in the group 11 cations is almost compensated by increased σ donation.     

The Structure of Bis[N‐6‐aminopyridyl‐N‐(1S)‐(+)‐10‐camphorsulfonylamino]palladium in the Solid State and in Solution

The complex, bis[N‐6‐aminopyridyl‐N‐(1S)‐(+)‐10‐camphorsulfonylamino]palladium, Pd[(S)‐APCS]₂, 1 , was prepared by reaction of 2‐[(1S)‐(+)‐10‐camphorsulfonamino]‐6‐aminopyridine with PdCl₂ in THF. Complex 1 has been characterized by spectroscopic methods and its structure has been determined by X‐ray crystallography. Crystal data: space group C2, a= 16.082 (2), b = 17.104 (2), c = 13.051 (2)Å, β = 99.95 (1)°, V = 3535.9 (8) ų, Z = 2 with final residuals R1 = 0.0491 and wR2 = 0.0944. Two independent molecules, (S,S)‐Pd[(S)‐APCS]2, 1a , and (R,R)‐Pd[(S)‐APCS]2, 1b , were found in each asymmetric unit, which exchange to each other via a series of nitrogen inversion and C‐C bond rotation. The inversion energy (ΔGc₁^≠) and the energy barrier (δGc₂^≠) were 11.5 ± 0.1 Kcal mol^?1 at 246 K and 9.8 ± 0.1 Kcal mol^?1 at 199 K, respectively, calculated by dynamic NMR data.     

Speciation of Rare‐Earth Metal Complexes in Ionic Liquids: A Multiple‐Technique Approach

The dissolution process of metal complexes in ionic liquids was investigated by a multiple‐technique approach to reveal the solvate species of the metal in solution. The task‐specific ionic liquid betainium bis(trifluoromethylsulfonyl)imide ([Hbet][Tf₂N]) is able to dissolve stoichiometric amounts of the oxides of the rare‐earth elements. The crystal structures of the compounds [Eu₂(bet)₈(H₂O)₄][Tf₂N]₆, [Eu₂(bet)₈(H₂O)₂][Tf₂N]₆?2H₂O, and [Y₂(bet)₆(H₂O)₄][Tf₂N]₆ were found to consist of dimers. These rare‐earth complexes are well soluble in the ionic liquids [Hbet][Tf₂N] and [C₄mim][Tf₂N] (C₄mim=1‐butyl‐3‐methylimidazolium). The speciation of the metal complexes after dissolution in these ionic liquids was investigated by luminescence spectroscopy, ¹H, ¹³C, and ⁸⁹Y NMR spectroscopy, and by the synchrotron techniques EXAFS (extended X‐ray absorption fine structure) and HEXS (high‐energy X‐ray scattering). The combination of these complementary analytical techniques reveals that the cationic dimers decompose into monomers after dissolution of the complexes in the ionic liquids. Deeper insight into the solution processes of metal compounds is desirable for applications of ionic liquids in the field of electrochemistry, catalysis, and materials chemistry.     

Ammonolysis of 1,2‐Bis[dichloro(methyl)silyl]ethane. On the Structure of 1,3,6,8‐Tetramethyl‐2,7,11,12‐tetraaza‐1,3,6,8‐tetrasila‐tricyclo[6.2.1.13,6]‐dodecane

Ammonolysis of 1,2‐bis[dichloro(methyl)silyl]ethane afforded a crystalline tricyclic silazane along with polymeric material. The crystalline material could be isolated in pure state. It was analyzed by ¹H, ¹³C, ¹⁵N and ²⁹Si NMR spectroscopy in solution, by ¹³C, ¹⁵N and ²⁹Si MAS NMR spectroscopy in the solid state, as well as by single‐crystal and powder X‐ray diffraction. The title compound exists as a single isomer in solution, whereas in the solid state the presence of several modifications is indicated, in particular by the solid‐state MAS NMR spectra.     

1,4‐Dipolar Cycloaddition Reactions in Ionic Liquids: A Facile Synthesis of 9aH,15H‐[1]Benzopyrano[3′,2′: 3,4]pyrido[2,1‐a]isoquinolines (=9aH,15H‐Benzo[a][1]benzopyrano[2,3‐h]quinolizines)

Ionic liquids were found to be a suitable reaction medium for 1,4‐dipolar cycloaddition reactions of an isoquinoline, an activated alkyne, and a 4‐oxo‐4H‐1‐benzopyran‐3‐carboxaldehyde at room temperature to afford [1]benzopyrano‐pyrido‐isoquinoline (=9aH,15H‐benzo[a][1]benzopyrano[2,3‐h]quinolizine) derivatives selectively in good yields. The ionic liquid can be recovered and recycled in further runs without loss of activity.     

Thiol–Ene “Click” Reaction Triggered by Neutral Ionic Liquid: The “Ambiphilic” Character of [hmim]Br in the Regioselective Nucleophilic Hydrothiolation

Thiol–ene “click” chemistry has emerged as a powerful strategy to construct carbon–heteroatom (C? S) bonds, which generally results in the formation of two regioisomers. To this end, the neutral ionic liquid [hmim]Br has been explored as a solvent cum catalyst for the synthesis of linear thioethers from activated and inactivated styrene derivatives or secondary benzyl alcohols and thiols without the requirement of using a metal complex, base, or free radical initiator. Furthermore, detailed mechanistic investigations using ¹H NMR spectroscopy and quadrupole time‐of‐flight electrospray ionization mass spectrometry (Q‐TOF ESI‐MS) revealed that the “ambiphilic” character of the ionic liquid promotes the nucleophilic addition of thiol to styrene through an anti‐Markovnikov pathway. The catalyst recyclability and the extension of the methodology for thiol–yne click chemistry are additional benefits. A competitive study among thiophenol, styrene, and phenyl acetylene revealed that the rate of reaction is in the order of thiol–yne>thiol–ene>dimerization of thiol in [hmim]Br.     

Synthesis,characterization, and electrochemistry of monophosphine‐containing diiron propane‐1,2‐dithiolate complexes related to the active site of [FeFe]‐hydrogenases

Five monophosphine‐substituted diiron propane‐1,2‐dithiolate complexes as the active site models of [FeFe]‐hydrogenases have been synthesized and characterized. Reactions of complex [Fe₂(CO)₆{μ‐SCH₂CH(CH₃)S}] ( 1 ) with a monophosphine ligand tris(4‐methylphenyl)phosphine, diphenyl‐2‐pyridylphosphine, tris(4‐chlorophenyl)phosphine, triphenylphosphine, or tris(4‐fluorophenyl)phosphine in the presence of the oxidative agent Me₃NO·2H₂O gave the monophosphine‐substituted diiron complexes [Fe₂(CO)₅(L){μ‐SCH₂CH(CH₃)S}] [L = P(4‐C₆H₄CH₃)₃, 2 ; Ph₂P(2‐C₅H₄N), 3 ; P(4‐C₆H₄Cl)₃, 4 ; PPh₃, 5 ; P(4‐C₆H₄F)₃, 6 ] in 81%–94% yields. Complexes 2 – 6 have been characterized by elemental analysis, spectroscopy, and X‐ray crystallography. In addition, electrochemical studies revealed that these complexes can catalyze the reduction of protons to H₂ in the presence of HOAc.