Synthesis and Properties of Isobicyclo‐DNA

We present the synthesis of the isobicyclo‐DNA building blocks with the nucleobases A, C, G and T, as well as biophysical and biological properties of oligonucleotides derived thereof. The synthesis of the sugar part was achieved in 5 steps starting from a known intermediate of the tricyclo‐DNA synthesis. Dodecamers containing single isobicyclo‐thymidine incorporations, fully modified A‐ and T‐containing sequences, and fully modified oligonucleotides containing all four bases were synthesized and characterized. Isobicyclo‐DNA forms stable duplexes with natural nucleic acids with a pronounced preference for DNA over RNA as complements. The most stable duplexes, however, arise by self‐pairing. Isobicyclo‐DNA forms preferentially B‐DNA‐like duplexes with DNA and A‐like duplexes with complementary RNA as determined by circular dichroism (CD) spectroscopy. Self‐paired duplexes show a yet unknown structure, as judged from CD spectroscopy. Biochemical tests revealed that isobicyclo‐DNA is stable in fetal bovine serum and does not elicit RNaseH activity.     

Binary Assembly of Au Nanoparticles with Controllable Two‐dimensional Architecture Directed by Phosphate Backbone Modified Oligonucleotide

A three complementary strand oligonucleotide system was employed to assemble two different‐sized, 15 and 25 nm, Au nanoparticles into binary two‐dimensional (2D) structures. First, two non‐complementary strands of phosphate backbone modified oligonucleotides (PM oligo‐DNA) were loaded on the surface of the 15 and 25 nm Au nanoparticles, respectively. Upon the addition of the third linker DNA, which was half complementary to each of the modified DNA, the Au nanoparticles would be assembled to binary 2D aggregates. The number of the 15 nm Au nanoparticles around a 25 nm Au naoparticle can be readily controlled by the length of the DNA helix used.     

Additional Base‐Pair Formation in DNA Duplexes by a Double‐Headed Nucleotide

We have designed and synthesised a double‐headed nucleotide that presents two nucleobases in the interior of a dsDNA duplex. This nucleotide recognises and forms Watson–Crick base pairs with two complementary adenosines in a Watson–Crick framework. Furthermore, with judicious positioning in complementary strands, the nucleotide recognises itself through the formation of a T:T base pair. Thus, two novel nucleic acid motifs can be defined by using our double‐headed nucleotide. Both motifs were characterised by UV melting experiments, CD and NMR spectroscopy and molecular dynamics simulations. Both motifs leave the thermostability of the native dsDNA duplex largely unaltered. Molecular dynamics calculations showed that the double‐headed nucleotides are accommodated in the dsDNA by entirely local perturbations and that the modified duplexes retain an overall B‐type geometry with the dsDNA unwound by around 25 or 60°, respectively, in each of the modified motifs. Both motifs can be accommodated twice in a dsDNA duplex without incurring any loss of stability and extrapolating from this observation and the results of modelling, it is conceivable that both can be multiplied several times within a dsDNA duplex. These new motifs extend the DNA recognition repertoire and may form the basis for a complete series of double‐headed nucleotides based on all 16 base combinations of the four natural nucleobases. In addition, both motifs can be used in the design of nanoscale DNA structures in which a specific duplex twist is required.     

De Novo Design of Functional Oligonucleotides with Acyclic Scaffolds

In this account, we demonstrate a new methodology for the de novo design of functional oligonucleotides with the acyclic scaffolds threoninol and serinol. Four functional motifs—wedge, interstrand‐wedge, dimer, and cluster—have been prepared from natural DNA or RNA and functional base surrogates prepared from d ‐threoninol. The following applications of these motifs are described: (1) photoregulation of formation and dissociation of a DNA duplex modified with azobenzene, (2) sequence‐specific detection of DNA using a fluorescent probe, (3) formation of fluorophore assemblies that mimic quantum dots, (4) improved strand selectivity of siRNA modified with a base surrogate, and (5) in vivo tracing of the RNAi pathway. Finally, we introduce artificial nucleic acids (XNAs) prepared from d ‐threoninol and serinol functionalized with each of the four nucleobases, which have unique properties compared with other acyclic XNAs. Functional oligonucleotides designed from acyclic scaffolds will be powerful tools for both DNA nanotechnology and biotechnology.     

Synthesis of cyclopentane amide DNA (cpa-DNA) and its pairing properties

We recently reported on the synthesis and pairing properties of the DNA analogue bicyclo[3.2.1]amide DNA (bca-DNA). In this analogue the nucleobases are attached via a linear, 4-bond amide-linker to a structurally preorganized sugar-phosphate backbone unit. To define the importance of the degree of structural rigidity of the bca-backbone unit on the pairing properties, we designed the structurally simpler cyclopentane amide DNA (cpa-DNA), in which the bicyclo[3.2.1]-scaffold was reduced to a cyclopentane unit while the base-linker was left unchanged. Here we present a synthetic route to the enantiomerically pure cpa-DNA monomers and the corresponding phosphoramidites containing the bases A and T, starting from a known, achiral precursor in 9 and 12 steps, respectively. Fully modified oligodeoxynucleotides were synthesized by standard solid-phase oligonucleotide chemistry, and their base-pairing properties with complementary oligonucleotides of the DNA-, RNA-, bca-DNA-, and cpa-DNA-backbones were assessed by UV melting curves and CD-spectroscopic methods. We found that cpa-oligoadenylates form duplexes with complementary DNA that are less stable by -2.7 degrees C/mod. compared to DNA. The corresponding cpa-oligothymidylates do not participate in complementary base-pairing with any of the investigated backbone systems except with its own (homo-duplex). As its congener bca-DNA, cpa-DNA seems to prefer left-handed helical duplex structures with DNA or with itself as indicated by the CD spectra.     

Resonant Formation of Strand Breaks in Sensitized Oligonucleotides Induced by Low‐Energy Electrons (0.5–9 eV)

Halogenated nucleobases are used as radiosensitizers in cancer radiation therapy, enhancing the reactivity of DNA to secondary low‐energy electrons (LEEs). LEEs induce DNA strand breaks at specific energies (resonances) by dissociative electron attachment (DEA). Although halogenated nucleobases show intense DEA resonances at various electron energies in the gas phase, it is inherently difficult to investigate the influence of halogenated nucleobases on the actual DNA strand breakage over the broad range of electron energies at which DEA can take place (<12 eV). By using DNA origami nanostructures, we determined the energy dependence of the strand break cross‐section for oligonucleotides modified with 8‐bromoadenine (^8BrA). These results were evaluated against DEA measurements with isolated ^8BrA in the gas phase. Contrary to expectations, the major contribution to strand breaks is from resonances at around 7 eV while resonances at very low energy (<2 eV) have little influence on strand breaks.     

Oligodeoxynucleotides Containing Diastereomeric O2′,C3′‐linked Bicyclic Nucleotide Units for Functionalization of the Major Groove of Nucleic Acid Duplexes: A Summary and Novel Derivatives*

The synthesis and evaluation of a range of piperazino‐derivatized diastereomeric O2′,C3′‐linked bicyclic nucleotides are described. A new and optimized protocol is presented for the synthesis of the bicyclic scaffold on which the piperazino moiety is appended. At low salt concentration, the C2″‐S‐configured piperazino‐modified oligonucleotides display significantly enhanced hybridization affinity toward complementary DNA and RNA targets relative to the unmodified oligonucleotide control, whereas no melting transition is observed for hybrids formed with the C2″‐R‐configured piperazino‐modified oligonucleotides. Upon derivatization of the piperazino moiety with a 1‐pyrenebutanoyl group, all modified oligonucleotides display strong DNA binding and profound DNA hybridization selectivity.     

Electrochemical Detection of Abasic Site‐Containing DNA

A simple and rapid approach for detecting apurinic (AP) sites in DNA, based on direct stripping chronopotentiometric measurements of the adenine and guanine nucleobases at a graphite electrode is described. Tetrahydrofuranyl residues, lacking a nucleobase moiety, were utilized for designing the AP sites and were incorporated in 19‐mer oligonucleotides. The change of adenine‐to‐guanine response ratio (A/G) in one‐, two‐ or three‐substituted adenosine residues for stable analogs of AP sites was exploited for electrochemical measurements of the adenine loss. The resulting A/G response ratio decreases linearly upon increasing the number of AP sites in the oligonucleotides; the values of A/G electrochemical signals were slightly enhanced when compared to the actual purine content. HPLC analysis of the released nucleobases confirmed that the sulfuric acid‐induced oligonucleotide cleavage provides complete apurination and dissolution of the released nucleobases in aqueous solution. Additional experiments with mixtures of free nucleobases and purine nucleosides reveal that the larger A/G ratio observed in the electrochemical analysis of AP‐site‐containing oligomers is attributed to the influence of the acid and/or thermal decomposition products (particularly the sugar fragments). This study represents the first step in developing a simple and direct electrochemical assay of AP sites in single‐stranded DNA.     

Type‐Dependent Identification of DNA Nucleobases by Using Diamondoids

The possibility of distinguishing between DNA nucleobases of different sizes is manifested here through quantum‐mechanical simulations. By using derivatives of small, modified diamond clusters, known as diamondoids, it is possible to separate the pyrimidines (cytosine and thymine) from the larger purines (adenine and guanine), according to the collective electronic and binding properties of these DNA nucleobases and the diamondoid. The latter acts as a probe with which these properties can be examined in detail. Short single‐stranded DNA is built up from single nucleobases to reveal the effect of each DNA unit on the sensing abilities of the diamondoid probe. Several ways of orienting the nucleobases, nucleosides, nucleotides, and short single‐stranded DNA are investigated; these lead to quite different electronic properties and may or may not enhance the possibility of separating the DNA nucleobases. For the optimum orientation, that is, one that promotes stronger hydrogen bonding of the diamondoid to the short DNA strand, it is found that the electronic band gaps of a purine strand lie in a completely different range to the band gaps of a pyrimidine strand. This difference can be over 1 eV, which is measurable and shows the potential of using diamondoids and their derivatives in biosensing devices.     

Synthesis and properties of oligonucleotides that contain a triazole‐linked nucleic acid dimer

New chemically modified oligonucleotides at the site of the backbone are needed to improve the properties of oligonucleotides. A practical synthesis for a triazole‐linked nucleoside dimer based on a PNA‐like structure has been developed. This involves synthesizing two uracil‐based monomers that contain either an azide or an alkyne functionality, followed by copper‐catalyzed 1,3‐dipolar cycloaddition. This dimer was incorporated within an oligonucleotide via phosphoramidite chemistry and UV‐monitored thermal denaturation data illustrates slight destabilization relative to its target complementary sequence. This chemically modified dimer will allow for a future investigation of its properties within DNA and RNA‐based applications. J. Heterocyclic Chem., (2011).     

Additional base-pair formation in DNA duplexes by a double-headed nucleotide

We have designed and synthesised a double-headed nucleotide that presents two nucleobases in the interior of a dsDNA duplex. This nucleotide recognises and forms Watson-Crick base pairs with two complementary adenosines in a Watson-Crick framework. Furthermore, with judicious positioning in complementary strands, the nucleotide recognises itself through the formation of a T:T base pair. Thus, two novel nucleic acid motifs can be defined by using our double-headed nucleotide. Both motifs were characterised by UV melting experiments, CD and NMR spectroscopy and molecular dynamics simulations. Both motifs leave the thermostability of the native dsDNA duplex largely unaltered. Molecular dynamics calculations showed that the double-headed nucleotides are accommodated in the dsDNA by entirely local perturbations and that the modified duplexes retain an overall B-type geometry with the dsDNA unwound by around 25 or 60°, respectively, in each of the modified motifs. Both motifs can be accommodated twice in a dsDNA duplex without incurring any loss of stability and extrapolating from this observation and the results of modelling, it is conceivable that both can be multiplied several times within a dsDNA duplex. These new motifs extend the DNA recognition repertoire and may form the basis for a complete series of double-headed nucleotides based on all 16 base combinations of the four natural nucleobases. In addition, both motifs can be used in the design of nanoscale DNA structures in which a specific duplex twist is required.     

Hybridization of DNA at the surface of phospholipid monolayers. Effect of orientation of oligonucleotide chains

We studied the properties of lipid monolayers formed at the air-water interface composed of dioleoylphosphatidylcholine (DOPC) with incorporated short (19-mer) oligonucleotides. These oligonucleotides were modified by oleylamine at both (3' and 5') terminals or only at one (3') terminal. Interaction of single-stranded (19-mer) oligonucleotides without oleylamine with DOPC monolayers resulted only in slight increase of surface pressure and the area per phospholipid molecule, while more substantial and significant increase of these values were observed following incorporation of oligonucelotides modified by oleylamine. This influence is similar for both types of oligonucleotide modifications. However, considerable differences in changes of monolayer properties took place after hybridization with complementary oligonucleotides. The hybridization of oligonucleotides with the DNA modified by oleic acid at both 3' and 5' terminals at the surface of lipid monolayer resulted in further increase of surface pressure and in the increase of the area per phospholipid molecule, while decrease of both the surface pressure and the area per phospholipid molecules were observed for hybridization with DNA modified by oleic acid at 3' terminal. It is possible that in latter case, the hybridization caused the loss of hybridized molecules from monolayers. Interaction of noncomplementary chains with DOPC monolayers with incorporated oleyl acid-modified DNA also influenced the properties of monolayers, but the effect was weaker in comparison with that observed for complementary chains.     

Ferrocenyl‐Modified DNA: Synthesis,Characterization and Integration with Semiconductor Electrodes

The ferrocenyl‐nucleoside, 5‐ethynylferrocenyl‐2′‐deoxycytidine ( 1 ) has been prepared by Pd‐catalyzed cross‐coupling between ethynylferrocene and 5‐iodo‐2′‐deoxycytidine and incorporated into oligonucleotides by using automated solid‐phase synthesis at both silica supports (CPG) and modified single‐crystal silicon electrodes. Analysis of DNA oligonucleotides prepared and cleaved from conventional solid supports confirms that the ferrocenyl‐nucleoside remains intact during synthesis and deprotection and that the resulting strands may be oxidised and reduced in a chemically reversible manner. Melting curve data show that the ferrocenyl‐modified oligonucleotides form duplex structures with native complementary strands. The redox potential of fully solvated ferrocenyl 12‐mers, 350 mV versus SCE, was shifted by +40 mV to a more positive potential upon treatment with the complement contrary to the anticipated negative shift based on a simple electrostatic basis. Automated solid‐phase methods were also used to synthesise 12‐mer ferrocenyl‐containing oligonucleotides directly at chemically modified silicon <111> electrodes. Hybridisation to the surface‐bound ferrocenyl‐DNA caused a shift in the reduction potential of +34 mV to more positive values, indicating that, even when a ferrocenyl nucleoside is contained in a film, the increased density of anions from the phosphate backbone of the complement is still dominated by other factors, for example, the hydrophobic environment of the ferrocene moiety in the duplex or changes in the ferrocene–phosphate distances. The reduction potential is shifted >100 mV after hybridisation when the aqueous electrolyte is replaced by THF/LiClO₄, a solvent of much lower dielectric constant; this is consistent with an explanation based on conformation‐induced changes in ferrocene–phosphate distances.     

Conformationally restricted triplex-forming oligonucleotides (TFOs). Binding properties of α-l-LNA and introduction of the N-glycosylated LNA-guanosine

The method for scaled-up production of α-l-LNA phosphoramidite building blocks containing thymine and 5-methylcytosine nucleobases is described. Binding properties of pyrimidine TFOs modified with α-l-LNA are reported. In contrast to LNA TFOs, the fully modified α-l-LNA forms a stable triplex with a model DNA duplex. Pyrimidine DNA/LNA/α-l-LNA chimeras also efficiently hybridize with a model DNA duplex in the parallel mode. LNA nucleoside containing unnatural N⁷-glycosylated guanine (LNA-⁷G) was synthesized by a convergent method and incorporated into LNA oligonucleotides. The triplex-forming alternating DNA/LNA oligonucleotides containing a single LNA-⁷G modification instead of internal LNA-mC demonstrate improved pH-dependent properties. The single LNA-⁷G modification can also discriminatively reduce competitive binding of TFOs to natural nucleic acids in the antiparallel duplex mode.     

Label‐Free and Label Based Electrochemical Detection of Hybridization by Using Methylene Blue and Peptide Nucleic Acid Probes at Chitosan Modified Carbon Paste Electrodes

A chitosan modified carbon paste electrode (ChiCPE) based DNA biosensor for the recognition of calf thymus double stranded DNA (dsDNA), single stranded DNA (ssDNA) and hybridization detection between complementary DNA oligonucleotides is presented. DNA and oligonucleotides were electrostatically attached by using chitosan onto CPE. The amino groups of chitosan formed a strong complex with the phosphate backbone of DNA. The immobilized probe could selectively hybridize with the target DNA to form hybrid on the CPE surface. The detection of hybridization was observed by using the label‐free and label based protocols. The oxidation signals of guanine and adenine greatly decreased when a hybrid was formed on the ChiCPE surface. The changes in the peak currents of methylene blue (MB), an electroactive label, were observed upon hybridization of probe with target. The signals of MB were investigated at dsDNA modified ChiCPE and ssDNA modified ChiCPE and the increased peak currents were observed, in respect to the order of electrodes. The hybridization of peptide nucleic acid (PNA) probes with the DNA target sequences at ChiCPE was also investigated. Performance characteristics of the sensor were described, along with future prospects.     

Sequence-selective extraction of single-stranded DNA using DNA-functionalized reverse micelles

We report here sequence-specific liquid/liquid extraction of single-stranded DNA using reverse micelles (water-in-oil microemulsions), in which hybridization between a DNA-surfactant and a target DNA having a complementary sequence allows selective transport of the target DNA to an organic phase from a mixture of DNA oligonucleotides.     

Multilabeled pyrene-functionalized 2'-amino-LNA probes for nucleic acid detection in homogeneous fluorescence assays

Homogeneous fluorescence assays for detection of nucleic acids are widely used in biological sciences. Typically, probes such as molecular beacons that rely on distance-dependent fluorescence quenching are used for such assays. Less attention has been devoted to tethering a single kind of fluorophores to oligonucleotides and exploiting hybridization-induced modulation of fluorescence intensity for nucleic acid detection. Herein, thermal denaturation experiments and fluorescence properties of oligodeoxyribonucleotides containing one or more 2'-N-(pyren-1-yl)carbonyl-2'-amino-LNA monomer(s) X are described. These pyrene-functionalized 2'-amino-LNAs display large increases in thermal stability against DNA/RNA complements with excellent Watson-Crick mismatch discrimination. Upon duplex formation of appropriately designed 2'-N-(pyren-1-yl)carbonyl-2'-amino-LNA probes and complementary DNA/RNA, intensive fluorescence emission with quantum yields between 0.28 and 0.99 are observed. Quantum yields of such magnitudes are unprecedented among pyrene-labeled oligonucleotides. Molecular modeling studies suggest that the dioxabicyclo[2.2.1]heptane skeleton and amide linkage of monomer X fix the orientation of the pyrene moiety in the minor groove of a nucleic acid duplex. Interactions between pyrene and nucleobases, which typically lead to quenching of fluorescence, are thereby reduced. Duplexes between multiple modified probes and DNA/RNA complements exhibit additive increases in fluorescence intensity, while the fluorescence of single stranded probes becomes increasingly quenched. Up to 69-fold increase in fluorescence intensity (measured at lambda(em) = 383 nm) is observed upon hybridization to DNA/RNA. The emission from duplexes of multiple modified probes and DNA/RNA at concentrations down to less than 500 nM can easily be seen by the naked eye using standard illumination intensities.     

2′‐Ethynyl‐DNA: Synthesis and Pairing Properties

2‐Ethynyl‐DNA was developed as a potential DNA‐selective oligonucleotide analog. The synthesis of 2′‐arabino‐ethynyl‐modified nucleosides was achieved starting from properly protected 2′‐ketonucleosides by addition of lithium (trimethylsilyl)acetylide followed by reduction of the tertiary alcohol. After a series of protecting‐group manipulations, phosphoramidite building blocks suitable for solid‐phase synthesis were obtained. The synthesis of oligonucleotides from these building blocks was successful when a fast deprotection scheme was used. The pairing properties of 2′‐arabino‐ethynyl‐modified oligonucleotides can be summarized as follows: 1) The 2′‐arabino‐ethynyl modification of pyrimidine nucleosides leads to a strong destabilization in duplexes with DNA as well as with RNA. The likely reason is that the ethynyl group sterically influences the torsional preferences around the glycosidic bond leading to a conformation not suitable for duplex formation. 2) If the modification is introduced in purine nucleosides, no such influence is observed. The pairing properties are not or only slightly changed, and, in some cases (deoxyadenosine homo‐polymers), the desired stabilization of the pairing with a DNA complementary strand and destabilization with an RNA complement is observed. 3) In oligonucleotides of alternating deoxycytidine‐deoxyguanosine sequence, the incorporation of 2′‐arabino‐ethynyl deoxyguanosine surprisingly leads to the formation of a left‐handed double helix, irrespective of salt concentration. The rationalization for this behavior is that the ethynyl group locks such duplexes in a left‐handed conformation through steric blockade.     

Synthesis and modelling of DNA junction and minor groove zipper motifs incorporating the double-headed nucleoside 5'(S)-C-(thymine-1-ylmethyl)thymidine

A nucleoside with two nucleobases, a so-called double-headed nucleoside, 5'(S)-C-(thymine-1-ylmethyl)thymidine 3, is synthesised and incorporated into oligonucleotides. The additional nucleobase is hereby positioned in the minor groove of the duplexes, which are formed with complementary DNA and RNA-sequences. Slight thermal destabilisation of these duplexes as compared to unmodified duplexes is observed. With other target sequences forming bulged duplexes or three-way junctions, no additional influence of the additional base on the thermal stability is observed. On the other hand, a base-base stacking interaction and subsequent stabilisation is observed when two double-headed nucleotide moieties are positioned in two complementary DNA-sequences forming a DNA-zipper motif.     

High‐Density DNA Functionalization by a Combination of Cu‐Catalyzed and Cu‐Free Click Chemistry

We report the regioselective Cu‐free click modification of styrene functionalized DNA with nitrile oxides. A series of modified oligodeoxynucleotides (nine base pairs) was prepared with increasing styrene density. 1,3‐Dipolar cycloaddition with nitrile oxides allows the high density functionalization of the styrene modified DNA directly on the DNA solid support and in solution. This click reaction proceeds smoothly even directly in the DNA synthesizer and gives exclusively 3,5‐disubstituted isoxazolines. Additionally, PCR products (300 and 900 base pairs) were synthesized with a styrene triphosphate and KOD XL polymerase. The click reaction on the highly modified PCR fragments allows functionalization of hundreds of styrene units on these large DNA fragments simultaneously. Even sequential Cu‐free and Cu‐catalyzed click reaction of PCR amplicons containing styrene and alkyne carrying nucleobases was achieved. This new approach towards high‐density functionalization of DNA is simple, modular, and efficient.