Electron‐Deficient Tetrabenzo‐Fused Pyracylene and Conversions into Curved and Planar π‐Systems Having Distinct Emission Behaviors

Polycyclic aromatic compounds containing fully unsaturated five‐membered ring(s) have been intensively studied because of their unique properties, which include high electron affinity and reactivity. Reported herein is an efficient route for the synthesis of tetrabenzo‐fused pyracylene, which comprises pyracylene and tetracene segments, using intramolecular oxidative C? H coupling. It was shown to possess high electron affinity and was found to undergo addition reactions with n‐butyllithium or benzyne. These reactions led to either a 1,4‐addition compound or triptycene‐type adduct with a curved or planar π‐system, respectively. Although these compounds exhibited similar sky‐blue emissions in a dilute solution, the emission band of the 1,4‐addition compound was significantly red‐shifted in the solid state and exhibited intense yellow emission attributable to the excimer, while the triptycene‐type adduct retained the intense blue color emission in the solid state.     

Conformational Change from a Twisted Figure‐Eight to an Open‐Extended Structure in Doubly Fused 36π Core‐Modified Octaphyrins Triggered by Protonation: Implication on Photodynamics and Aromaticity

Two examples of core‐modified 36π doubly fused octaphyrins that undergo a conformational change from a twisted figure‐eight to an open‐extended structure induced by protonation are reported. Syntheses of the two octaphyrins (in which Ar=mesityl or tolyl) were achieved by a simple acid‐catalyzed condensation of dipyrrane unit containing an electron‐rich, rigid dithienothiophene (DTT) core with pentafluorobenzaldehyde followed by oxidation with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ). The single‐crystal X‐ray structure of the octaphyrin (in which Ar=mesityl) shows a figure‐eight twisted conformation of the expanded porphyrin skeleton with two DTT moieties oriented in a staggered conformation with a π‐cloud distance of 3.7 Å. Spectroscopic and quantum mechanical calculations reveal that both octaphyrins conform to a [4n]π nonaromatic electronic structure. Protonation of the pyrrole nitrogen atoms of the octaphyrins results in dramatic structural change, which led to 1) a large redshift and sharpening of absorption bands in electronic absorption spectrum, 2) a large change in chemical shift of pyrrole β‐CH and ? NH protons in the ¹H NMR spectrum, 3) a small increase in singlet lifetimes, and 4) a moderate increase in two‐photon absorption cross‐section values. Furthermore, nucleus‐independent chemical shift (NICS) values calculated at various geometrical positions show positive values and anisotropy‐induced current density (AICD) plots indicate paratropic ring‐currents for the diprotonated form of the octaphyrin (in which Ar=tolyl); the single‐crystal X‐ray structure of the diprotonated form of the octaphyrin shows an extended structure in which one of the pyrrole ring of each dipyrrin subunit undergoes a 180 ° ring‐flip. Four trifluoroacetic acid (TFA) molecules are bound above and below the molecular plane defined by meso‐carbon atoms and are held by N? H ??? O, N? H ??? F, and C? H ??? F intermolecular hydrogen‐bonding interactions. The extended‐open structure upon protonation allows π‐delocalization and the electronic structure conforms to a [4n]π Hückel antiaromatic in the diprotonated state.     

π‐Extended Indenofluorenes

A series of π‐extended aromatic indenofluorene (IF) analogues with naphthalene and anthracene cores have been synthesized through acid‐catalyzed intramolecular cyclization. The regioselectivity of the reaction is controlled by a combination of steric and electronic factors and in some cases several possible regioisomers have resulted from the same precursor. The effects of ring connectivity on the optoelectronic properties were investigated by DFT calculations, absorption/emission spectroscopy, cyclic voltammetry, and spectroelectrochemical studies. All regioisomers exhibited a redshift of their absorption/emission bands relative to the parent IF analogues, but the magnitude of this shift and other optoelectronic properties (luminescence quantum yield, etc.) depends on the ring connectivity in a less obvious manner.     

Crystal Structures and Emitting Properties of Trifluoromethylaminoquinoline Derivatives: Thermal Single‐Crystal‐to‐Single‐Crystal Transformation of Polymorphic Crystals That Emit Different Colors

2,4‐Trifluoromethylquinoline (TFMAQ) derivatives that have amine ( 1 ), methylamine ( 2 ), phenylamine ( 3 ), and dimethylamine ( 4 ) substituents at the 7‐position of the quinoline ring were prepared and crystallized. Six crystals including the crystal polymorphs of 2 (crystal GB and YG) and 3 (crystal B and G) were obtained and characterized by X‐ray crystallography. In solution, TFMAQ derivatives emitted relatively strong fluorescence (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =418–469 nm and Φ_f(s)=0.23–0.60) depending on the solvent polarity. From Lippert–Mataga plots, Δμ values in the range of 7.8–14 D were obtained. In the crystalline state, TFMAQ derivatives emitted at longer wavelengths (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464–530 nm) with lower intensity (Φ_f(c)=0.01–0.28) than those in n‐hexane solution. The polymorphous crystals of 2 and 3 emitted different colors: 2 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =470 and 530 nm with Φ_f(c)=0.04 and approximately 0.01 for crystal GB and YG, respectively; and 3 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464 and 506 nm with Φ_f(c)=0.28 and approximately 0.28 for crystal B and G, respectively. In both crystal polymorphs of 2 and 3 , crystals GB and G showed emission color changes by heating/melting/cooling cycles that were representative. By following the color changes in heating at the temperature below the melting point with X‐ray diffraction measurements and X‐ray crystallography, the single‐crystal‐to‐single‐crystal transformations from crystal GB to YG for 2 and from crystal B to G for 3 were revealed.     

Synthesis,Properties, and Packing Structures of Corannulene‐Based π‐Systems Containing Heptagons

Introduction of heptagons into hexagonal carbon lattices can generate negatively curved polycyclic aromatic hydrocarbons, which are of significant interest in the field of exotic molecular nanocarbons. We have successfully synthesized and characterized corannulene‐based π‐systems containing heptagons ( 4 and 5 ) as new negatively curved polycyclic aromatic hydrocarbons as well as possible intermediates in the synthesis of warped nanographene 1 . The formation of 4 and 5 represents the first example for which a heptagon is formed under Scholl reaction conditions before all hexagons are formed. Even more interestingly, we discovered that the mode and degree of solid‐phase intermolecular π–π interaction can be altered significantly by the degree of ring closure.     

Co‐MOFs Containing Flexible α,ω‐Alkane‐dicarboxylates and Bis(imidazole) Ligands: Synthesis,Structure, and Properties

Three structurally related flexible bis(imidazole) ligands reacted with Co(NO₃)₂ · 6H₂O and succinic acid (L₁) to yield three new metal‐organic frameworks {[Co(L₁)(L₂)] · (H₂O)}_n ( 1 ) [L₂ = 2‐bis(imidazol‐1‐yl)ethane], {[Co(L₁)(L₃)](H₂O)}_n ( 2 ) [L₃ = 1,4‐bis(imidazol‐1‐yl) butane], and {[Co(L₁)(L₄)] · (H₂O)}_n ( 3 ) [L₄ = 1,4‐bis(2‐methyl‐imidazol‐1‐yl)butane], respectively. These complexes were synthesized under solvothermal conditions and characterized by elemental analysis, IR spectroscopy, single‐crystal and powder X‐ray diffraction, as well as thermal analyses. Interestingly, the ligands in these complexes exhibit different conformations and further cause three different configurations. Complex 1 shows a three‐dimensional (3D) framework, which is connected by two‐dimensional (2D) layer structures through hydrogen bonds. Complex 2 is a diamond structure with threefold interpenetration. Complex 3 is a 3D framework linked by hydrogen bonds like complex 1 .     

Hybrid [5]Radialenes with Bispyrroloheteroles: New Electron‐Donating Units

Bispyrroloheteroles have been synthesized to address their intrinsic structural, optical, and electrochemical properties. The X‐ray crystal structures and calculated natural bond orbital (NBO) bond orders unambiguously demonstrated the existence of a two pyrrole‐fused five‐membered ring with short exocyclic C?C double bonds and long endocyclic C?C single bonds, supporting that the bispyrroloheteroles are rare examples of structurally characterized hybrid [5]radialenes. The bispyrroloheteroles were found to act as an electron‐donating unit, which would be fascinating for the rational design of new charge‐transporting and donor–acceptor photovoltaic materials as well as versatile charge‐transfer complexes.     

Regioselective Cage Opening of La2@D2(10611)‐C72 with 5,6‐Diphenyl‐3‐(2‐pyridyl)‐1,2,4‐triazine

The thermal reaction of the endohedral metallofullerene La₂@D₂(10611)‐C₇₂, which contains two pentalene units at opposite ends of the cage, with 5,6‐diphenyl‐3‐(2‐pyridyl)‐1,2,4‐triazine proceeded selectively to afford only two bisfulleroid isomers. The molecular structure of one isomer was determined using single‐crystal X‐ray crystallography. The results suggest that the [4+2] cycloaddition was initiated in a highly regioselective manner at the C? C bond connecting two pentagon rings of C₇₂. Subsequent intramolecular electrocyclization followed by cycloreversion resulted in the formation of an open‐cage derivative having three seven‐membered ring orifices on the cage and a significantly elongated cage geometry. The reduction potentials of the open‐cage derivatives were similar to those of La₂@D₂‐C₇₂ whereas the oxidation potentials were shifted more negative than those of La₂@D₂‐C₇₂. These results point out that further oxidation could occur easily in the derivatives.     

HOMO Stabilisation in π‐Extended Dibenzotetrathiafulvalene Derivatives for Their Application in Organic Field‐Effect Transistors

Three new organic semiconductors, in which either two methoxy units are directly linked to a dibenzotetrathiafulvalene (DB‐TTF) central core and a 2,1,3‐chalcogendiazole is fused on the one side, or four methoxy groups are linked to the DB‐TTF, have been synthesised as active materials for organic field‐effect transistors (OFETs). Their electrochemical behaviour, electronic absorption and fluorescence emission as well as photoinduced intramolecular charge transfer were studied. The electron‐withdrawing 2,1,3‐chalcogendiazole unit significantly affects the electronic properties of these semiconductors, lowering both the HOMO and LUMO energy levels and hence increasing the stability of the semiconducting material. The solution‐processed single‐crystal transistors exhibit high performance with a hole mobility up to 0.04 cm² V^?1 s^?1 as well as good ambient stability.     

Synthesis and Characterization of Planar Five‐Ring‐Fused Dithiophene‐dione

A series of new organic semiconductors based on s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐4,9‐dione was successfully synthesized and characterized. The electron withdrawing carbonyl group lowers the LUMO energy levels, leading to increased electronegativities, which is beneficial for high photo‐stability in air. The n‐alkyl substituted compounds, 1c and 1d , crystallize with the rigid coplanar systems packed into slipped face‐to‐face π‐stacks. Interestingly, 1c and 1d also show liquid crystalline behaviors, which give highly ordered molecular packing over large area.     

Three Dicyanidometallate(I)‐based Complexes Incorporating Hydrogen‐bonding, π–π Packing and d10–d10 Interactions with Auxiliary 2,2′‐Bipyridyl‐like Ligands

To investigate the influence of the non‐covalent interactions, such as hydrogen‐bonding, π–π packing and d¹⁰–d¹⁰ interactions in the supramolecular motifs, three cyanido‐bridged heterobimetallic discrete complexes {Mn(bipy)₂(H₂O)[Ag(CN)₂]}[Ag(CN)₂] ( 1 ), {Mn(phen)₂(H₂O)[Au(CN)₂]}₂[Au(CN)₂]₂ · 4H₂O ( 2 ), and {Cd(bipy)₂(H₂O)[Au(CN)₂]}[Au(CN)₂] ( 3 ) (bipy = 2,2′‐bipyridine, and phen = 1,10‐phenanthroline), which are based on dicyanidometallate(I) groups with 1:2 stoichiometry of metal ions and 2,2′‐bipyridyl‐like co‐ligands were synthesized and structurally characterized. In compound 1 , hydrogen bonding and π–π interactions governed the supramolecular contacts. In compound 2 , the incorporation of aurophilic, hydrogen bonding and π–π interactions result in a 3D supramolecular network. In compound 3 , hydrogen bonding and π–π stacking interactions result in a 2D supramolecular layer. In the three complexes, hydrogen‐bonding, π–π packing and/or d¹⁰–d¹⁰ interactions can play important roles in increasing the dimensionality of supramolecular assemblies.     

Azocinoindole Synthesis by a Gold(I)‐Catalyzed Ring Expansion of 2‐Propargyl‐β‐Tetrahydrocarboline

A new methodology taking advantage of gold(I)‐catalyzed ring expansion has been developed to assemble tricyclic 1H‐azocino[5,4‐b]indoles from 2‐propargyl‐β‐tetrahydrocarbolines. The azocinoindoles were obtained in moderate to excellent yields; the structure of which was established by X‐ray crystallographic analysis. A mechanism involving regioselective intramolecular hydroarylation, [1,2]‐alkenyl migration and carbon–carbon bond‐fragmentation was proposed.     

4‐Nitro‐3‐(5‐tetrazole)furoxan and Its Salts: Synthesis,Characterization, and Energetic Properties

A series of new energetic salts based on 4‐nitro‐3‐(5‐tetrazole)furoxan (HTNF) has been synthesized. All of the salts have been fully characterized by nuclear magnetic resonance (¹H and ¹³C), infrared (IR) spectroscopy, elemental analysis, and differential scanning calorimetry (DSC). The crystal structures of neutral HTNF ( 3 ) and its ammonium ( 4 ) and N‐carbamoylguanidinium salts ( 9 ) have been determined by single‐crystal X‐ray diffraction analysis. The densities of 3 and its nine salts were found to range from 1.63 to 1.84 g cm^?3. Impact sensitivities have been determined by hammer tests, and the results ranged from 2 J (very sensitive) to >40 J (insensitive). Theoretical performance calculations (Gaussian 03 and EXPLO 5.05) provided detonation pressures and velocities for the ionic compounds 4 – 12 in the ranges 25.5–36.2 GPa and 7934–8919 m s^?1, respectively, which make them competitive energetic materials.     

A Fluorescent Blue Phosphazene Dye: Synthesis,Structure and Optical Properties of 1,6‐Bis(Dimethylamino)‐2,5,7,10‐Tetraazo‐1,6λ5‐Diphosphapyrene

Herein we report on the synthesis, structure, and optical properties of the fluorescent blue phosphazene dye 1,6‐bis(dimethylamino)‐2,5,7,10‐tetraazo‐1,6λ⁵‐diphosphapyrene, which was isolated as the unexpected product of the reaction between 1,4,5,8‐(tetraamino)naphthalene and [P(NMe₂)₃Br]Br. This dye, which turned out to be soluble in water and a range of organic solvents (including hexane, tetrahydrofuran / petroleum ether, acetonitrile, and ethanol), was structurally characterized by XRD. Its absorption as well as emission spectra and their sensitivity to pH variations were analyzed. The experimental work is complemented by quantum chemical calculations on the possible intermediate on the way to the isolated product and on its pK_a value.     

Molecular dynamics study of the stereostructure of 1,4‐linked poly(cyclohexa‐1,3‐diene) obtained with π‐allylnickel‐based catalysts

Temperature‐constant and pressure‐constant molecular dynamics simulations of crystalline 1,4‐linked poly(cyclohexa‐1,3‐diene) (CHD) were performed using the COMPASS force field. Powder X‐ray diffraction spectra calculated from the simulated atomic coordinates were compared with the measured spectrum of the crystal of 1,4‐linked poly(CHD), obtained using a bis(allylnickel bromide) (ANiBr)/methylaluminoxane (MAO) catalyst. As a result of the comparison, the geometrical isomerism of the 1,4‐linked poly(CHD) obtained with the ANiBr/MAO catalyst was found to be cis syndiotactic. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 973–978, 2001     

α,α′‐Diarylacenaphtho[1,2‐c]phosphole P‐Oxides: Divergent Synthesis and Application to Cathode Buffer Layers in Organic Photovoltaics

A divergent method for the synthesis of α,α′‐diarylacenaphtho[1,2‐c]phosphole P‐oxides has been established; α,α′‐dibromoacenaphtho[c]phosphole P‐oxide, which was prepared through a Ti^II‐mediated cyclization of 1,8‐bis(trimethylsilylethynyl)naphthalene, underwent a Stille coupling with three different kinds of aryltributylstannanes to afford the α,α′‐diarylacenaphtho[c]phosphole P‐oxides in moderate to good yields. X‐ray crystallographic analyses and UV/Vis absorption/fluorescence measurements have revealed that the degree of π‐conjugation, the packing motif, the electron‐accepting ability, and the thermal stability of the acenaphtho[c]phosphole π‐systems are finely tunable with the α‐aryl substituents. All the P?O and P?S derivatives exhibited high stability in their electrochemically reduced state. To use this class of arene‐fused phosphole π‐systems as n‐type semiconducting materials, we evaluated device performances of the bulk heterojunction organic photovoltaics (OPV) that consist of poly(3‐hexylthiophene), an indene‐C₇₀ bisadduct, and a cathode buffer layer. The insertion of the diarylacenaphtho[c]phosphole P‐oxides as the buffer layer was found to improve the power conversion efficiency of the polymer‐based OPV devices.